Plastics pipes, fittings and valves for general use, see 23.040.20
Plastics pipes, fittings and valves for general use, see 23.040.45
Plastics pipes, fittings and valves for general use, see 23.060
  • Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO/R 265:1962
Pipes and fittings of plastics materials — Socket fittings with spigot ends for domestic and industrial waste pipes — Basic dimensions : Metric series
95.99 ISO/TC 138
ISO 2703:1973
Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification
95.99 ISO/TC 138/SC 4
ISO 3633:1991
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 4422:1990
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
95.99 ISO/TC 138/SC 2
ISO 4422:1990/Amd 1:1992
Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications — Amendment 1
95.99 ISO/TC 138/SC 2
ISO 4435:1991
Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings for buried drainage and sewerage systems — Specifications
95.99 ISO/TC 138/SC 1
ISO 4437-1:2014
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
90.92 ISO/TC 138/SC 4
ISO 4437-2:2014
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
90.92 ISO/TC 138/SC 4
ISO 4437-3:2014
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
90.92 ISO/TC 138/SC 4
ISO 4437-4:2015
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 4: Valves
60.60 ISO/TC 138/SC 7
ISO 4437-5:2014
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system
90.92 ISO/TC 138/SC 4
ISO 4437:1988
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specification
95.99 ISO/TC 138/SC 4
ISO 4437:1997
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
95.99 ISO/TC 138/SC 4
ISO 4437:1997/Cor 1:1999
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
ISO 4437:2007
Buried polyethylene (PE) pipes for the supply of gaseous fuels — Metric series — Specifications
95.99 ISO/TC 138/SC 4
ISO/WD 4437-1
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
20.00 ISO/TC 138/SC 4
ISO/WD 4437-2
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
20.00 ISO/TC 138/SC 4
ISO/WD 4437-3
Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 3: Fittings
20.00 ISO/TC 138/SC 4
ISO/WD 4437-5
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system
20.00 ISO/TC 138/SC 4
ISO 6993-1:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
ISO 6993-2:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
90.93 ISO/TC 138/SC 4
ISO 6993-3:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
90.93 ISO/TC 138/SC 4
ISO 6993-4:2006
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation
90.93 ISO/TC 138/SC 4
ISO 6993:1990
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specification
95.99 ISO/TC 138/SC 4
ISO 6993:2001
Buried, high-impact poly(vinyl chloride) (PVC-HI) pipes for the supply of gaseous fuels — Specifications
95.99 ISO/TC 138/SC 4
ISO 7349:1983
Thermoplastics valves — Connection references
95.99 ISO/TC 138/SC 7
ISO 7508:1985
Unplasticized polyvinyl chloride (PVC-U) valves for pipes under pressure — Basic dimensions — Metric series
95.99 ISO/TC 138/SC 7
ISO 7628-1:1985
Road vehicles — Thermoplastic tubing for use in air braking systems — Part 1: Dimensions and marking
95.99 ISO/TC 22
ISO 7628-1:1998
Road vehicles — Thermoplastics tubing for air braking systems — Part 1: Dimensions and marking
95.99 ISO/TC 22
ISO 7628-2:1998
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods
95.99 ISO/TC 22
ISO 7628-2:1998/Cor 1:1999
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods — Technical Corrigendum 1
95.99 ISO/TC 22
ISO 7628:2010
Road vehicles — Thermoplastics tubing for air braking systems
90.93 ISO/TC 22/SC 33
ISO/TR 7628-2:1986
Road vehicles — Thermoplastics tubing for use in air braking systems — Part 2: Installation on the vehicle and test methods
95.99 ISO/TC 22
ISO 7671:1991
Polypropylene (PP) pipes and fittings (jointed by means of elastomeric sealing rings) for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 7675:1991
Chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 7682:1991
Acrylonitrile/butadiene/styrene (ABS) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 8085-1:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools
95.99 ISO/TC 138/SC 4
ISO 8085-1:2001/Cor 1:2008
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 1: Fittings for socket fusion using heated tools — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
ISO 8085-2:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings
95.99 ISO/TC 138/SC 4
ISO 8085-2:2001/Cor 1:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
ISO 8085-2:2001/Cor 2:2008
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 2: Spigot fittings for butt fusion, for socket fusion using heated tools and for use with electrofusion fittings — Technical Corrigendum 2
95.99 ISO/TC 138/SC 4
ISO 8085-3:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings
95.99 ISO/TC 138/SC 4
ISO 8085-3:2001/Cor 1:2007
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 1
95.99 ISO/TC 138/SC 4
ISO 8085-3:2001/Cor 2:2008
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings — Technical Corrigendum 2
95.99 ISO/TC 138/SC 4
ISO 8233:1988
Thermoplastics valves — Torque — Test method
90.92 ISO/TC 138/SC 7
ISO 8242:1989
Polypropylene (PP) valves for pipes under pressure — Basic dimensions — Metric series
95.99 ISO/TC 138/SC 7
ISO 8659:1989
Thermoplastics valves — Fatigue strength — Test method
90.92 ISO/TC 138/SC 7
ISO/DIS 8659
Thermoplastics valves — Fatigue strength — Test method
40.60 ISO/TC 138/SC 7
ISO 8770:1991
High-density polyethylene (PE-HD) pipes and fittings for soil and waste discharge (low and high temperature) systems inside buildings — Specifications
95.99 ISO/TC 138/SC 1
ISO 8779:1992
Polyethylene (PE) pipes for irrigation laterals — Specifications
95.99 ISO/TC 138/SC 2
ISO 8795:1990
Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method
95.99 ISO/TC 138/SC 5
ISO 8796:1989
Polyethylene (PE) 25 pipes for irrigation laterals — Susceptibility to environmental stress-cracking induced by insert-type fittings — Test method and specification
95.99 ISO/TC 138/SC 2
ISO 9393-1:1994
Thermoplastics valves — Pressure test methods and requirements — Part 1: General
95.99 ISO/TC 138/SC 7
ISO 9393-1:2004
Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 1: General
90.93 ISO/TC 138/SC 7
ISO 9393-2:1997
Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves
95.99 ISO/TC 138/SC 7
ISO 9393-2:1997/Cor 1:1997
Thermoplastics valves — Pressure test methods and requirements — Part 2: Test conditions and basic requirements for PE, PP, PVC-U and PVDF valves — Technical Corrigendum 1
95.99 ISO/TC 138/SC 7
ISO 9393-2:2005
Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 2: Test conditions and basic requirements
90.60 ISO/TC 138/SC 7
ISO 9808:1990
Solar water heaters — Elastomeric materials for absorbers, connecting pipes and fittings — Method of assessment
90.93 ISO/TC 180
ISO/TR 10837:1991
Determination of the thermal stability of polyethylene (PE) for use in gas pipes and fittings
95.99 ISO/TC 138/SC 4
ISO 10838-1:2000
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
ISO 10838-3:2001
Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels — Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm
95.99 ISO/TC 138/SC 4
ISO 10931-4:1997
Plastics piping systems for industrial applications — Poly(vinylidene fluoride) (PVDF) — Part 4: Valves
95.99 ISO/TC 138/SC 7
ISO 10933:1997
Polyethylene (PE) valves for gas distribution systems
95.99 ISO/TC 138/SC 7
ISO 11424:1996
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
95.99 ISO/TC 45/SC 1
ISO 11424:2017
Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification
60.60 ISO/TC 45/SC 1
ISO 13775-1:2000
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
95.99 ISO/TC 45/SC 1
ISO 13775-1:2015
Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications
60.60 ISO/TC 45/SC 1
ISO 13775-2:2000
Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
95.99 ISO/TC 45/SC 1
ISO 13775-2:2016
Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications
60.60 ISO/TC 45/SC 1
ISO 14692-1:2002
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
95.99 ISO/TC 67/SC 6
ISO 14692-1:2017
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 1: Vocabulary, symbols, applications and materials
60.60 ISO/TC 67/SC 6
ISO 14692-2:2002
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
95.99 ISO/TC 67/SC 6
ISO 14692-2:2002/Cor 1:2005
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
ISO 14692-2:2017
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 2: Qualification and manufacture
60.60 ISO/TC 67/SC 6
ISO 14692-3:2002
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
95.99 ISO/TC 67/SC 6
ISO 14692-3:2002/Cor 1:2005
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
ISO 14692-3:2017
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design
60.60 ISO/TC 67/SC 6
ISO 14692-4:2002
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
95.99 ISO/TC 67/SC 6
ISO 14692-4:2002/Cor 1:2006
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation — Technical Corrigendum 1
95.99 ISO/TC 67/SC 6
ISO 14692-4:2017
Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation
60.60 ISO/TC 67/SC 6
ISO 15840:2004
Ships and marine technology — Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications
90.60 ISO/TC 8/SC 3
ISO 16486-1:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
90.92 ISO/TC 138/SC 4
ISO 16486-1:2012/Amd 1:2014
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General — Amendment 1
60.60 ISO/TC 138/SC 4
ISO 16486-2:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
90.92 ISO/TC 138/SC 4
ISO 16486-2:2012/Amd 1:2014
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes — Amendment 1
60.60 ISO/TC 138/SC 4
ISO 16486-3:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
90.92 ISO/TC 138/SC 4
ISO 16486-3:2012/Amd 1:2014
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings — Amendment 1
60.60 ISO/TC 138/SC 4
ISO 16486-4:2016
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
90.92 ISO/TC 138/SC 7
ISO 16486-5:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
90.92 ISO/TC 138/SC 4
ISO 16486-6:2012
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
90.92 ISO/TC 138/SC 4
ISO/DIS 16486-1
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
40.00 ISO/TC 138/SC 4
ISO/DIS 16486-2
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
40.00 ISO/TC 138/SC 4
ISO/DIS 16486-3
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
40.00 ISO/TC 138/SC 4
ISO/NP 16486-4
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 4: Valves
10.99 ISO/TC 138/SC 7
ISO/WD 16486-5
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
20.20 ISO/TC 138/SC 4
ISO/WD 16486-6
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
20.20 ISO/TC 138/SC 4
ISO 22621-1:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General
95.99 ISO/TC 138/SC 4
ISO 22621-2:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 2: Pipes
95.99 ISO/TC 138/SC 4
ISO 22621-3:2007
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 3: Fittings
95.99 ISO/TC 138/SC 4
ISO 22621-5:2010
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 5: Fitness for purpose of the system
95.99 ISO/TC 138/SC 4
ISO 22621-6:2010
Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 6: Code of practice for design, handling and installation
95.99 ISO/TC 138/SC 4

No matching records found. Please try changing the filter settings.