• Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 62:1980
Plastics — Determination of water absorption
95.99 ISO/TC 61/SC 6
ISO 62:1999
Plastics — Determination of water absorption
95.99 ISO/TC 61/SC 6
ISO 62:2008
Plastics — Determination of water absorption
90.93 ISO/TC 61/SC 6
ISO 75-1:1993
Plastics — Determination of temperature of deflection under load — Part 1: General test method
95.99 ISO/TC 61/SC 2
ISO 75-1:2004
Plastics — Determination of temperature of deflection under load — Part 1: General test method
95.99 ISO/TC 61/SC 2
ISO 75-1:2013
Plastics — Determination of temperature of deflection under load — Part 1: General test method
90.92 ISO/TC 61/SC 2
ISO 75:1974
Plastics and ebonite — Determination of temperature of deflection under load
95.99 ISO/TC 61
ISO/DIS 75-1
Plastics — Determination of temperature of deflection under load — Part 1: General test method
40.60 ISO/TC 61/SC 2
ISO/R 117:1959
Withdrawal of ISO/R 117-1959
95.99 ISO/TC 61
ISO 118:1976
Withdrawal of ISO 118-1976
95.99 ISO/TC 61
ISO 171:1980
Plastics — Determination of bulk factor of moulding materials
90.93 ISO/TC 61/SC 5
ISO/R 173:1961
Withdrawal of ISO/R 173-1961
95.99 ISO/TC 61
ISO 175:1981
Plastics — Determination of the effects of liquid chemicals, including water
95.99 ISO/TC 61/SC 6
ISO 175:1999
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
95.99 ISO/TC 61/SC 6
ISO 175:2010
Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
90.93 ISO/TC 61/SC 6
ISO 176:1976
Plastics — Determination of loss of plasticizers — Activated carbon method
95.99 ISO/TC 61/SC 6
ISO 176:2005
Plastics — Determination of loss of plasticizers — Activated carbon method
90.93 ISO/TC 61/SC 6
ISO 177:1976
Plastics — Determination of migration of plasticizers
95.99 ISO/TC 61
ISO 177:1988
Plastics — Determination of migration of plasticizers
95.99 ISO/TC 61/SC 6
ISO 177:2016
Plastics — Determination of migration of plasticizers
60.60 ISO/TC 61/SC 6
ISO 178:1975
Plastics — Determination of flexural properties of rigid plastics
95.99 ISO/TC 61
ISO 178:1993
Plastics — Determination of flexural properties
95.99 ISO/TC 61/SC 2
ISO 178:2001
Plastics — Determination of flexural properties
95.99 ISO/TC 61/SC 2
ISO 178:2001/Amd 1:2004
Plastics — Determination of flexural properties — Amendment 1: Precision statement
95.99 ISO/TC 61/SC 2
ISO 178:2010
Plastics — Determination of flexural properties
95.99 ISO/TC 61/SC 2
ISO 178:2010/Amd 1:2013
Plastics — Determination of flexural properties — Amendment 1
95.99 ISO/TC 61/SC 2
ISO 178:2019
Plastics — Determination of flexural properties
60.60 ISO/TC 61/SC 2
ISO 179-1:2000
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
95.99 ISO/TC 61/SC 2
ISO 179-1:2000/Amd 1:2005
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test — Amendment 1
95.99 ISO/TC 61/SC 2
ISO 179-1:2010
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
90.93 ISO/TC 61/SC 2
ISO 179-2:1997
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
90.92 ISO/TC 61/SC 2
ISO 179-2:1997/Amd 1:2011
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Amendment 1: Precision data
60.60 ISO/TC 61/SC 2
ISO 179-2:1997/Cor 1:1998
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test — Technical Corrigendum 1
60.60 ISO/TC 61/SC 2
ISO 179:1982
Plastics — Determination of Charpy impact strength of rigid materials
95.99 ISO/TC 61/SC 2
ISO 179:1993
Plastics — Determination of Charpy impact strength
95.99 ISO/TC 61/SC 2
ISO 179:1993/Cor 1:1994
Plastics — Determination of Charpy impact strength — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO/DIS 179-2
Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test
40.60 ISO/TC 61/SC 2
ISO 180:1982
Plastics — Determination of Izod impact strength of rigid materials
95.99 ISO/TC 61/SC 2
ISO 180:1993
Plastics — Determination of Izod impact strength
95.99 ISO/TC 61/SC 2
ISO 180:1993/Cor 1:1995
Plastics — Determination of Izod impact strength — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO 180:2000
Plastics — Determination of Izod impact strength
90.92 ISO/TC 61/SC 2
ISO 180:2000/Amd 1:2006
Plastics — Determination of Izod impact strength — Amendment 1
60.60 ISO/TC 61/SC 2
ISO 180:2000/Amd 2:2013
Plastics — Determination of Izod impact strength — Amendment 2: Precision data
60.60 ISO/TC 61/SC 2
ISO/FDIS 180
Plastics — Determination of Izod impact strength
50.20 ISO/TC 61/SC 2
ISO 181:1981
Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
95.99 ISO/TC 61/SC 4
ISO 183:1976
Plastics — Qualitative evaluation of the bleeding of colorants
95.99 ISO/TC 61/SC 9
ISO 194:1981
Plastics — List of equivalent terms
95.99 ISO/TC 61
ISO 194:1981/Add 1:1983
Plastics — List of equivalent terms — Addendum 1
95.99 ISO/TC 61/SC 1
ISO 194:1981/Add 2:1983
Plastics — List of equivalent terms — Addendum 2
95.99 ISO/TC 61/SC 1
ISO 194:1981/Add 4:1981
Plastics — List of equivalent terms — Addendum 4
95.99 ISO/TC 61
ISO 194:1981/Add 5:1983
Plastics — List of equivalent terms — Addendum 5
95.99 ISO/TC 61/SC 1
ISO 291:1977
Plastics — Standard atmospheres for conditioning and testing
95.99 ISO/TC 61/SC 6
ISO 291:1997
Plastics — Standard atmospheres for conditioning and testing
95.99 ISO/TC 61/SC 6
ISO 291:1997/Cor 1:1998
Plastics — Standard atmospheres for conditioning and testing — Technical Corrigendum 1
95.99 ISO/TC 61/SC 6
ISO 291:2005
Plastics — Standard atmospheres for conditioning and testing
95.99 ISO/TC 61/SC 6
ISO 291:2008
Plastics — Standard atmospheres for conditioning and testing
90.93 ISO/TC 61/SC 6
ISO/R 292:1967
Withdrawal of ISO/R 292-1967
95.99 ISO/TC 61
ISO 458-1:1985
Plastics — Determination of stiffness in torsion of flexible materials — Part 1: General method
90.93 ISO/TC 61/SC 2
ISO/R 458:1965
Plastics — Determination of stiffness in torsion as a function of temperature
95.99 ISO/TC 61/SC 2
ISO/R 462:1965
Withdrawal of ISO/R 462-1965
95.99 ISO/TC 61
ISO 472:1979
Plastics — Vocabulary
95.99 ISO/TC 61/SC 1
ISO 472:1979/Add 1:1982
Plastics — Vocabulary — Addendum 1
95.99 ISO/TC 61/SC 1
ISO 472:1979/Add 2:1983
Plastics — Vocabulary — Addendum 2
95.99 ISO/TC 61/SC 1
ISO 472:1979/Add 3:1984
Plastics — Vocabulary — Addendum 3
95.99 ISO/TC 61/SC 1
ISO 472:1988
Plastics — Vocabulary
95.99 ISO/TC 61/SC 1
ISO 472:1988/Amd 1:1993
Plastics — Vocabulary — Amendment 1: Terms relating to individual macromolecules, their assemblies, dilute polymer solutions and crystalline polymers
95.99 ISO/TC 61/SC 1
ISO 472:1988/Amd 3:1993
Plastics — Vocabulary — Amendment 3: General terms and terms relating to degradable plastics
95.99 ISO/TC 61/SC 1
ISO 472:1988/Amd 4:1993
Plastics — Vocabulary — Amendment 4: Basic terms in polymer science
95.99 ISO/TC 61/SC 1
ISO 472:1988/Amd 5:1996
Plastics — Vocabulary — Amendment 5: Terms relating to carbon fibre
95.99 ISO/TC 61/SC 1
ISO 472:1999
Plastics — Vocabulary
95.99 ISO/TC 61/SC 1
ISO 472:2013
Plastics — Vocabulary
90.93 ISO/TC 61/SC 1
ISO 472:2013/Amd 1:2018
Plastics — Vocabulary — Amendment 1: Additional items
60.60 ISO/TC 61/SC 1
ISO 489:1983
Plastics — Determination of the refractive index of transparent plastics
95.99 ISO/TC 61
ISO 489:1999
Plastics — Determination of refractive index
90.93 ISO/TC 61/SC 5
ISO 527-1:1993
Plastics — Determination of tensile properties — Part 1: General principles
95.99 ISO/TC 61/SC 2
ISO 527-1:1993/Amd 1:2005
Plastics — Determination of tensile properties — Part 1: General principles — Amendment 1: Details of extensometer
95.99 ISO/TC 61/SC 2
ISO 527-1:1993/Cor 1:1994
Plastics — Determination of tensile properties — Part 1: General principles — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO 527-1:2012
Plastics — Determination of tensile properties — Part 1: General principles
95.99 ISO/TC 61/SC 2
ISO 527-1:2019
Plastics — Determination of tensile properties — Part 1: General principles
60.60 ISO/TC 61/SC 2
ISO 527-2:1993
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
95.99 ISO/TC 61/SC 2
ISO 527-2:1993/Cor 1:1994
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO 527-2:2012
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
90.93 ISO/TC 61/SC 2
ISO/R 527:1966
Plastics — Determination of tensile properties
95.99 ISO/TC 61/SC 2
ISO 537:1980
Plastics — Testing with the torsion pendulum
95.99 ISO/TC 61
ISO/R 600:1967
Withdrawal of ISO/R 600-1967
95.99 ISO/TC 61
ISO 604:1973
Plastics — Determination of compressive properties
95.99 ISO/TC 61
ISO 604:1993
Plastics — Determination of compressive properties
95.99 ISO/TC 61/SC 2
ISO 604:2002
Plastics — Determination of compressive properties
90.93 ISO/TC 61/SC 2
ISO 846:1978
Plastics — Determination of behaviour under the action of fungi and bacteria — Evaluation by visual examination or measurement of change in mass or physical properties
95.99 ISO/TC 61/SC 6
ISO 846:1997
Plastics — Evaluation of the action of microorganisms
95.99 ISO/TC 61/SC 6
ISO 846:2019
Plastics — Evaluation of the action of microorganisms
60.60 ISO/TC 61/SC 6
ISO 868:1978
Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
95.99 ISO/TC 61
ISO 868:1985
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
95.99 ISO/TC 61/SC 2
ISO 868:2003
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
90.93 ISO/TC 61/SC 2
ISO/R 869:1968
Withdrawal of ISO/R 869-1968
95.99 ISO/TC 61
ISO/R 870:1968
Withdrawal of ISO/R 870-1968
95.99 ISO/TC 61
ISO 871:1980
Plastics — Determination of temperature of evolution of flammable gases (decomposition temperature) from a small sample of pulverized material
95.99 ISO/TC 61/SC 4
ISO 871:1996
Plastics — Determination of ignition temperature using a hot-air furnace
95.99 ISO/TC 61/SC 4
ISO 871:2006
Plastics — Determination of ignition temperature using a hot-air furnace
90.93 ISO/TC 61/SC 4
ISO 877-1:2009
Plastics — Methods of exposure to solar radiation — Part 1: General guidance
90.93 ISO/TC 61/SC 6
ISO 877-2:2009
Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass
90.93 ISO/TC 61/SC 6
ISO 877-3:2009
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation
95.99 ISO/TC 61/SC 6
ISO 877-3:2018
Plastics — Methods of exposure to solar radiation — Part 3: Intensified weathering using concentrated solar radiation
60.60 ISO/TC 61/SC 6
ISO 877:1994
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
95.99 ISO/TC 61/SC 6
ISO/R 878:1968
Withdrawal of ISO/R 878-1968
95.99 ISO/TC 61
ISO/R 879:1968
Withdrawal of ISO/R 879-1968
95.99 ISO/TC 61
ISO 899-1:1993
Plastics — Determination of creep behaviour — Part 1: Tensile creep
95.99 ISO/TC 61/SC 2
ISO 899-1:2003
Plastics — Determination of creep behaviour — Part 1: Tensile creep
95.99 ISO/TC 61/SC 2
ISO 899-1:2003/Amd 1:2015
Plastics — Determination of creep behaviour — Part 1: Tensile creep — Amendment 1
95.99 ISO/TC 61/SC 2
ISO 899-1:2017
Plastics — Determination of creep behaviour — Part 1: Tensile creep
60.60 ISO/TC 61/SC 2
ISO 899-2:1993
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
95.99 ISO/TC 61/SC 2
ISO 899-2:2003
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading
90.93 ISO/TC 61/SC 2
ISO 899-2:2003/Amd 1:2015
Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading — Amendment 1
60.60 ISO/TC 61/SC 2
ISO/R 922:1969
Withdrawal of ISO/R 922-1969
95.99 ISO/TC 61
ISO 974:1980
Plastics — Determination of the brittleness temperature by impact
95.99 ISO/TC 61/SC 2
ISO 974:2000
Plastics — Determination of the brittleness temperature by impact
90.93 ISO/TC 61/SC 2
ISO 1043-1:1987
Plastics — Symbols — Part 1: Basic polymers and their special characteristics
95.99 ISO/TC 61/SC 1
ISO 1043-1:1997
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
95.99 ISO/TC 61/SC 1
ISO 1043-1:2001
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
95.99 ISO/TC 61/SC 1
ISO 1043-1:2011
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
90.93 ISO/TC 61/SC 1
ISO 1043-1:2011/Amd 1:2016
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics — Amendment 1: New symbol ST for syndiotactic
60.60 ISO/TC 61/SC 1
ISO 1043-2:1988
Plastics — Symbols — Part 2: Fillers and reinforcing materials
95.99 ISO/TC 61/SC 1
ISO 1043-2:2000
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
95.99 ISO/TC 61/SC 1
ISO 1043-2:2011
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials
90.93 ISO/TC 61/SC 1
ISO 1043-3:1996
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
95.99 ISO/TC 61/SC 1
ISO 1043-3:2016
Plastics — Symbols and abbreviated terms — Part 3: Plasticizers
60.60 ISO/TC 61/SC 1
ISO 1043-4:1998
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants
90.60 ISO/TC 61/SC 1
ISO 1043-4:1998/Amd 1:2016
Plastics — Symbols and abbreviated terms — Part 4: Flame retardants — Amendment 1: Code numbers
60.60 ISO/TC 61/SC 1
ISO 1043:1978
Plastics — Symbols
95.99 ISO/TC 61
ISO 1133:1981
Plastics — Determination of the melt flow rate of thermoplastics
95.99 ISO/TC 61
ISO 1137:1975
Plastics — Determination of behaviour in a ventilated tubular oven
95.99 ISO/TC 61
ISO 1147:1975
Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test
95.99 ISO/TC 61
ISO 1147:1995
Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test
90.93 ISO/TC 61/SC 9
ISO/DIS 1147
Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test
40.98 ISO/TC 61/SC 9
ISO 1183-1:2004
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
95.99 ISO/TC 61/SC 5
ISO 1183-1:2012
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
95.99 ISO/TC 61/SC 5
ISO 1183-1:2019
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
60.60 ISO/TC 61/SC 5
ISO 1183-2:2004
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
95.99 ISO/TC 61/SC 5
ISO 1183-2:2019
Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
60.60 ISO/TC 61/SC 5
ISO 1183-3:1999
Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method
90.93 ISO/TC 61/SC 5
ISO 1183:1987
Plastics — Methods for determining the density and relative density of non-cellular plastics
95.99 ISO/TC 61/SC 5
ISO/R 1183:1970
Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
95.99 ISO/TC 61
ISO/R 1195:1970
Withdrawal of ISO/R 1195-1970
95.99 ISO/TC 61
ISO 1210:1982
Plastics — Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
95.99 ISO/TC 61/SC 4
ISO 1210:1992
Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
95.99 ISO/TC 61/SC 4
ISO 1233:1975
Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution
95.99 ISO/TC 61
ISO/R 1326:1970
Plastics — Determination of flammability and burning rate of plastics in the form of film
95.99 ISO/TC 61
ISO 1409:1995
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method
95.99 ISO/TC 45/SC 2
ISO 1409:2006
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension by the ring method
90.92 ISO/TC 45/SC 3
ISO/DIS 1409
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension
40.20 ISO/TC 45/SC 3
ISO 1625:1977
Plastics — Aqueous dispersions of polymers and copolymers — Determination of residue at 105 degrees C
95.99 ISO/TC 61/SC 9
ISO 1625:1998
Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures
95.99 ISO/TC 61/SC 9
ISO/R 1627:1970
Withdrawal of ISO/R 1627-1970
95.99 ISO/TC 61
ISO 1628-1:1984
Guidelines for the standardization of methods for the determination of viscosity number and limiting viscosity number of polymers in dilute solution — Part 1: General conditions
95.99 ISO/TC 61/SC 9
ISO 1628-1:1998
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 1628-1:2009
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles
90.60 ISO/TC 61/SC 5
ISO 1628-1:2009/Amd 1:2012
Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 1: General principles — Amendment 1
60.60 ISO/TC 61/SC 5
ISO/R 1628:1970
Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers
95.99 ISO/TC 61
ISO 1675:1975
Plastics — Liquid resins — Determination of density by the pyknometer method
95.99 ISO/TC 61
ISO 1675:1985
Plastics — Liquid resins — Determination of density by the pyknometer method
90.93 ISO/TC 61/SC 5
ISO 2039-1:1987
Plastics — Determination of hardness — Part 1: Ball indentation method
95.99 ISO/TC 61/SC 2
ISO 2039-1:1993
Plastics — Determination of hardness — Part 1: Ball indentation method
95.99 ISO/TC 61/SC 2
ISO 2039-1:2001
Plastics — Determination of hardness — Part 1: Ball indentation method
90.93 ISO/TC 61/SC 2
ISO 2039-2:1981
Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
95.99 ISO/TC 61/SC 2
ISO 2039-2:1987
Plastics — Determination of hardness — Part 2: Rockwell hardness
90.93 ISO/TC 61/SC 2
ISO 2039:1973
Plastics and ebonite — Determination of hardness by the ball indentation method
95.99 ISO/TC 61/SC 2
ISO 2115:1996
Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature
90.93 ISO/TC 61/SC 9
ISO 2555:1974
Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity
95.99 ISO/TC 61
ISO 2555:1989
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity by the Brookfield Test method
95.99 ISO/TC 61/SC 5
ISO 2555:2018
Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method
60.60 ISO/TC 61/SC 5
ISO 2578:1974
Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
95.99 ISO/TC 61
ISO 2578:1993
Plastics — Determination of time-temperature limits after prolonged exposure to heat
90.93 ISO/TC 61/SC 6
ISO 2818:1994
Plastics — Preparation of test specimens by machining
95.99 ISO/TC 61/SC 9
ISO 2818:1994/Cor 1:2007
Plastics — Preparation of test specimens by machining — Technical Corrigendum 1
95.99 ISO/TC 61/SC 9
ISO 2818:2018
Plastics — Preparation of test specimens by machining
60.60 ISO/TC 61/SC 9
ISO 3146:1974
Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
95.99 ISO/TC 61
ISO 3146:1985
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers
95.99 ISO/TC 61/SC 5
ISO 3146:2000
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
90.93 ISO/TC 61/SC 5
ISO 3146:2000/Cor 1:2002
Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods — Technical Corrigendum 1
60.60 ISO/TC 61/SC 5
ISO 3167:1983
Plastics — Preparation and use of multipurpose test specimens
95.99 ISO/TC 61
ISO 3167:1993
Plastics — Multipurpose test specimens
95.99 ISO/TC 61/SC 2
ISO 3167:2002
Plastics — Multipurpose test specimens
95.99 ISO/TC 61/SC 2
ISO 3167:2014
Plastics — Multipurpose test specimens
90.20 ISO/TC 61/SC 2
ISO 3219:1993
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate
90.92 ISO/TC 35/SC 9
ISO/CD 3219-1
Rheology — Part 1: General terms and definitions for rotational and oscillatory rheometry
30.99 ISO/TC 35/SC 9
ISO/CD 3219-2
Rheology — Part 2: General principles of rotational and oscillatory rheometry
30.99 ISO/TC 35/SC 9
ISO 3251:2003
Paints, varnishes and plastics — Determination of non-volatile-matter content
95.99 ISO/TC 35
ISO 3251:2008
Paints, varnishes and plastics — Determination of non-volatile-matter content
95.99 ISO/TC 35
ISO 3251:2019
Paints, varnishes and plastics — Determination of non-volatile-matter content
60.60 ISO/TC 35/SC 9
ISO 3451-1:1981
Plastics — Determination of ash — Part 1: General methods
95.99 ISO/TC 61/SC 5
ISO 3451-1:1997
Plastics — Determination of ash — Part 1: General methods
95.99 ISO/TC 61/SC 5
ISO 3451-1:2008
Plastics — Determination of ash — Part 1: General methods
95.99 ISO/TC 61/SC 5
ISO 3451-1:2019
Plastics — Determination of ash — Part 1: General methods
60.60 ISO/TC 61/SC 5
ISO 3451:1976
Withdrawal of ISO 3451-1976
95.99 ISO/TC 61
ISO/TR 3717:1975
Withdrawal of ISR/TR 3717-1975
95.99 ISO/TC 61
ISO/TR 3718:1975
Withdrawal of ISO/TR 3718-1975
95.99 ISO/TC 61
ISO 3915:1981
Plastics — Measurement of resistivity of conductive plastics
90.93 ISO/TC 61/SC 5
ISO/TR 4137:1978
Plastics — Determination of modulus of elasticity by alternating flexure
95.99 ISO/TC 61/SC 2
ISO 4576:1996
Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content)
90.93 ISO/TC 61/SC 9
ISO 4582:1980
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
95.99 ISO/TC 61/SC 6
ISO 4582:1998
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
95.99 ISO/TC 61/SC 6
ISO 4582:2007
Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
95.99 ISO/TC 61/SC 6
ISO 4582:2017
Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
60.60 ISO/TC 61/SC 6
ISO 4589-1:1996
Plastics — Determination of burning behaviour by oxygen index — Part 1: Guidance
95.99 ISO/TC 61/SC 4
ISO 4589-1:2017
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
60.60 ISO/TC 61/SC 4
ISO 4589-2:1996
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
95.99 ISO/TC 61/SC 4
ISO 4589-2:1996/Amd 1:2005
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test — Amendment 1
95.99 ISO/TC 61/SC 4
ISO 4589-2:2017
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
60.60 ISO/TC 61/SC 4
ISO 4589-3:1996
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
95.99 ISO/TC 61/SC 4
ISO 4589-3:2017
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
60.60 ISO/TC 61/SC 4
ISO 4589:1984
Plastics — Determination of flammability by oxygen index
95.99 ISO/TC 61/SC 4
ISO/CD 4589-4
Plastics — Determination of burning behaviour by oxygen index — Part 4: High flow velocity test
30.99 ISO/TC 61/SC 4
ISO 4599:1986
Plastics — Determination of resistance to environmental stress cracking (ESC) — Bent strip method
95.99 ISO/TC 61/SC 6
ISO 4600:1981
Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
95.99 ISO/TC 61
ISO 4600:1992
Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
95.99 ISO/TC 61/SC 6
ISO 4607:1978
Plastics — Methods of exposure to natural weathering
95.99 ISO/TC 61/SC 6
ISO 4611:1980
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
95.99 ISO/TC 61/SC 6
ISO 4611:1987
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
95.99 ISO/TC 61/SC 6
ISO 4611:2008
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
95.99 ISO/TC 61/SC 6
ISO 4611:2010
Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist
90.93 ISO/TC 61/SC 6
ISO 4892-1:1994
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
95.99 ISO/TC 61/SC 6
ISO 4892-1:1999
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
95.99 ISO/TC 61/SC 6
ISO 4892-1:2016
Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance
60.60 ISO/TC 61/SC 6
ISO 4892-2:1994
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc sources
95.99 ISO/TC 61/SC 6
ISO 4892-2:2006
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
95.99 ISO/TC 61/SC 6
ISO 4892-2:2006/Amd 1:2009
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps — Amendment 1
95.99 ISO/TC 61/SC 6
ISO 4892-2:2013
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
90.93 ISO/TC 61/SC 6
ISO 4892-3:1994
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
95.99 ISO/TC 61/SC 6
ISO 4892-3:2006
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
95.99 ISO/TC 61/SC 6
ISO 4892-3:2013
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
95.99 ISO/TC 61/SC 6
ISO 4892-3:2016
Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
60.60 ISO/TC 61/SC 6
ISO 4892-4:1994
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
95.99 ISO/TC 61/SC 6
ISO 4892-4:2004
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
95.99 ISO/TC 61/SC 6
ISO 4892-4:2004/Cor 1:2005
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps — Technical Corrigendum 1
95.99 ISO/TC 61/SC 6
ISO 4892-4:2013
Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps
90.93 ISO/TC 61/SC 6
ISO 5659-1:1996
Plastics — Smoke generation — Part 1: Guidance on optical-density testing
95.99 ISO/TC 61/SC 4
ISO 5659-2:1994
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99 ISO/TC 61/SC 4
ISO 5659-2:1994/Cor 1:1997
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test — Technical Corrigendum 1
95.99 ISO/TC 61/SC 4
ISO 5659-2:2006
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99 ISO/TC 61/SC 4
ISO 5659-2:2012
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
95.99 ISO/TC 61/SC 4
ISO 5659-2:2017
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
60.60 ISO/TC 61/SC 4
ISO/TR 5659-3:1999
Plastics — Smoke generation — Part 3: Determination of optical density by a dynamic-flow method
95.99 ISO/TC 61/SC 4
ISO 6133:1981
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
95.99 ISO/TC 45/SC 2
ISO 6133:1998
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
95.99 ISO/TC 45/SC 2
ISO 6133:2015
Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
60.60 ISO/TC 45/SC 2
ISO 6252:1981
Plastics — Determination of environmental stress cracking (ESC) — Constant tensile stress method
95.99 ISO/TC 61
ISO 6252:1992
Plastics — Determination of environmental stress cracking (ESC) — Constant-tensile-stress method
95.99 ISO/TC 61/SC 6
ISO 6427:1982
Plastics — Determination of matter extractable by organic solvents (conventional methods)
95.99 ISO/TC 61/SC 5
ISO 6427:1992
Plastics — Determination of matter extractable by organic solvents (conventional methods)
95.99 ISO/TC 61/SC 5
ISO 6427:2013
Plastics — Determination of matter extractable by organic solvents (conventional methods)
90.93 ISO/TC 61/SC 5
ISO 6601:1987
Plastics — Friction and wear by sliding — Identification of test parameters
95.99 ISO/TC 61/SC 2
ISO 6601:2002
Plastics — Friction and wear by sliding — Identification of test parameters
90.93 ISO/TC 61/SC 2
ISO 6603-1:1985
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 1: Falling dart method
95.99 ISO/TC 61/SC 2
ISO 6603-1:2000
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing
90.93 ISO/TC 61/SC 2
ISO 6603-2:1989
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test
95.99 ISO/TC 61/SC 2
ISO 6603-2:2000
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing
90.93 ISO/TC 61/SC 2
ISO 6721-10:1997
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99 ISO/TC 61/SC 2
ISO 6721-10:1999
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
95.99 ISO/TC 61/SC 2
ISO 6721-10:2015
Plastics — Determination of dynamic mechanical properties — Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
90.93 ISO/TC 61/SC 5
ISO 6721-11:2012
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
95.99 ISO/TC 61/SC 5
ISO 6721-11:2019
Plastics — Determination of dynamic mechanical properties — Part 11: Glass transition temperature
60.60 ISO/TC 61/SC 5
ISO 6721-12:2009
Plastics — Determination of dynamic mechanical properties — Part 12: Compressive vibration — Non-resonance method
90.93 ISO/TC 61/SC 2
ISO 6721-1:1994
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99 ISO/TC 61/SC 2
ISO 6721-1:1994/Cor 1:1995
Plastics — Determination of dynamic mechanical properties — Part 1: General principles — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO 6721-1:2001
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99 ISO/TC 61/SC 2
ISO 6721-1:2011
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 6721-1:2019
Plastics — Determination of dynamic mechanical properties — Part 1: General principles
60.60 ISO/TC 61/SC 5
ISO 6721-2:1994
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
95.99 ISO/TC 61/SC 2
ISO 6721-2:1994/Cor 1:1995
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO 6721-2:2008
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
95.99 ISO/TC 61/SC 5
ISO 6721-2:2019
Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method
60.60 ISO/TC 61/SC 5
ISO 6721-3:1994
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method
90.60 ISO/TC 61/SC 5
ISO 6721-3:1994/Cor 1:1995
Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method — Technical Corrigendum 1
60.60 ISO/TC 61/SC 2
ISO 6721-4:1994
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
95.99 ISO/TC 61/SC 2
ISO 6721-4:2008
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
95.99 ISO/TC 61/SC 5
ISO 6721-4:2019
Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method
60.60 ISO/TC 61/SC 5
ISO 6721-5:1996
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
95.99 ISO/TC 61/SC 5
ISO 6721-5:1996/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method — Amendment 1
95.99 ISO/TC 61/SC 2
ISO 6721-5:2019
Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method
60.60 ISO/TC 61/SC 5
ISO 6721-6:1996
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
95.99 ISO/TC 61/SC 5
ISO 6721-6:1996/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method — Amendment 1
95.99 ISO/TC 61/SC 2
ISO 6721-6:2019
Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method
60.60 ISO/TC 61/SC 5
ISO 6721-7:1996
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
95.99 ISO/TC 61/SC 5
ISO 6721-7:1996/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method — Amendment 1
95.99 ISO/TC 61/SC 2
ISO 6721-7:2019
Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method
60.60 ISO/TC 61/SC 5
ISO 6721-8:1997
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
95.99 ISO/TC 61/SC 5
ISO 6721-8:2019
Plastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-propagation method
60.60 ISO/TC 61/SC 5
ISO 6721-9:1997
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
95.99 ISO/TC 61/SC 5
ISO 6721-9:1997/Amd 1:2007
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method — Amendment 1: Precision
95.99 ISO/TC 61/SC 2
ISO 6721-9:2019
Plastics — Determination of dynamic mechanical properties — Part 9: Tensile vibration — Sonic-pulse propagation method
60.60 ISO/TC 61/SC 5
ISO 7111:1987
Plastics — Thermogravimetry of polymers — Temperature scanning method
95.99 ISO/TC 61/SC 5
ISO 8256:1990
Plastics — Determination of tensile-impact strength
95.99 ISO/TC 61/SC 2
ISO 8256:1990/Cor 1:1991
Plastics — Determination of tensile-impact strength — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO 8256:2004
Plastics — Determination of tensile-impact strength
90.93 ISO/TC 61/SC 2
ISO 8660:2002
Plastics — Determination of permanganate absorption number of caprolactam — Spectrometric method
90.93 ISO/TC 61/SC 5
ISO 8962:1987
Plastics — Polymer dispersions — Determination of density
95.99 ISO/TC 61/SC 9
ISO 9352:1995
Plastics — Determination of resistance to wear by abrasive wheels
95.99 ISO/TC 61/SC 2
ISO 9352:2012
Plastics — Determination of resistance to wear by abrasive wheels
90.93 ISO/TC 61/SC 2
ISO 9370:1997
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
95.99 ISO/TC 61/SC 6
ISO 9370:2009
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
95.99 ISO/TC 61/SC 6
ISO 9370:2017
Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method
60.60 ISO/TC 61/SC 6
ISO 9773:1990
Plastics — Determination of burning behaviour of flexible vertical specimens in contact with a small-flame ignition source
95.99 ISO/TC 61/SC 4
ISO 9773:1998
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
90.93 ISO/TC 61/SC 4
ISO 9773:1998/Amd 1:2003
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source — Amendment 1: Specimens
60.60 ISO/TC 61/SC 4
ISO 10093:1994
Plastics — Fire tests — Standard ignition sources
95.99 ISO/TC 61/SC 4
ISO 10093:1994/Cor 1:1995
Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1
95.99 ISO/TC 61
ISO 10093:1998
Plastics — Fire tests — Standard ignition sources
95.99 ISO/TC 61/SC 4
ISO/TR 10093:2017
Plastics — Fire tests — Standard ignition sources
95.99 ISO/TC 61/SC 4
ISO/TR 10093:2018
Plastics — Fire tests — Standard ignition sources
60.60 ISO/TC 61/SC 4
ISO 10210:2012
Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials
90.93 ISO/TC 61/SC 14
ISO 10350:1993
Plastics — Acquisition and presentation of comparable single-point data
95.99 ISO/TC 61/SC 2
ISO 10351:1992
Plastics — Determination of the combustibility of specimens using a 125 mm flame source
95.99 ISO/TC 61/SC 4
ISO/TR 10353:1992
Plastics — Survey of ignition sources used for national and international fire tests
95.99 ISO/TC 61/SC 4
ISO 10640:2011
Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
90.93 ISO/TC 61/SC 6
ISO 10840:2003
Plastics — Guidance for the use of standard fire tests
95.99 ISO/TC 61/SC 4
ISO 10840:2008
Plastics — Guidance for the use of standard fire tests
90.93 ISO/TC 61/SC 4
ISO/TR 10840:1993
Plastics — Burning behaviour — Guidance for development and use of fire tests
95.99 ISO/TC 61/SC 4
ISO/TR 10840:1993/Cor 1:1995
Plastics — Burning behaviour — Guidance for development and use of fire tests — Technical Corrigendum 1
95.99 ISO/TC 61/SC 4
ISO 10927:2011
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
95.99 ISO/TC 61/SC 5
ISO 10927:2018
Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
60.60 ISO/TC 61/SC 5
ISO 11357-1:1997
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 11357-1:2009
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 11357-1:2016
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
60.60 ISO/TC 61/SC 5
ISO 11357-2:1999
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature
95.99 ISO/TC 61/SC 5
ISO 11357-2:2013
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and glass transition step height
90.92 ISO/TC 61/SC 5
ISO 11357-3:1999
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
95.99 ISO/TC 61/SC 5
ISO 11357-3:1999/Amd 1:2005
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1
95.99 ISO/TC 61/SC 5
ISO 11357-3:2011
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
95.99 ISO/TC 61/SC 5
ISO 11357-3:2018
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
60.60 ISO/TC 61/SC 5
ISO 11357-4:2005
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
95.99 ISO/TC 61/SC 5
ISO 11357-4:2014
Plastics — Differential scanning calorimetry (DSC) — Part 4: Determination of specific heat capacity
90.60 ISO/TC 61/SC 5
ISO 11357-5:1999
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
95.99 ISO/TC 61/SC 5
ISO 11357-5:2013
Plastics — Differential scanning calorimetry (DSC) — Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
90.93 ISO/TC 61/SC 5
ISO 11357-6:2002
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time
95.99 ISO/TC 61/SC 5
ISO 11357-6:2002/Amd 1:2007
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time — Amendment 1
95.99 ISO/TC 61/SC 5
ISO 11357-6:2008
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
95.99 ISO/TC 61/SC 5
ISO 11357-6:2018
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
60.60 ISO/TC 61/SC 5
ISO 11357-7:2002
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
95.99 ISO/TC 61/SC 5
ISO 11357-7:2015
Plastics — Differential scanning calorimetry (DSC) — Part 7: Determination of crystallization kinetics
60.60 ISO/TC 61/SC 5
ISO/CD 11357-8
Plastics — Differential scanning calorimetry (DSC) — Part 8: Determination of thermal conductivity
30.60 ISO/TC 61/SC 5
ISO/DIS 11357-2
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
40.60 ISO/TC 61/SC 5
ISO 11358-1:2014
Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
90.60 ISO/TC 61/SC 5
ISO 11358-2:2005
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
95.99 ISO/TC 61/SC 5
ISO 11358-2:2014
Plastics — Thermogravimetry (TG) of polymers — Part 2: Determination of activation energy
90.60 ISO/TC 61/SC 5
ISO 11358-3:2013
Plastics — Thermogravimetry (TG) of polymers — Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
90.60 ISO/TC 61/SC 5
ISO 11358:1997
Plastics — Thermogravimetry (TG) of polymers — General principles
95.99 ISO/TC 61/SC 5
ISO 11359-1:1999
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 11359-1:2014
Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
90.93 ISO/TC 61/SC 5
ISO 11359-2:1999
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
90.93 ISO/TC 61/SC 5
ISO 11359-3:2002
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
95.99 ISO/TC 61/SC 5
ISO 11359-3:2019
Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
60.60 ISO/TC 61/SC 5
ISO 11403-1:1994
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
95.99 ISO/TC 61/SC 2
ISO 11403-1:2001
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
95.99 ISO/TC 61/SC 2
ISO 11403-1:2014
Plastics — Acquisition and presentation of comparable multipoint data — Part 1: Mechanical properties
90.60 ISO/TC 61/SC 2
ISO 11403-2:1995
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
95.99 ISO/TC 61/SC 2
ISO 11403-2:2004
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
95.99 ISO/TC 61/SC 2
ISO 11403-2:2012
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
90.92 ISO/TC 61/SC 2
ISO 11403-3:1999
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
95.99 ISO/TC 61/SC 2
ISO 11403-3:2014
Plastics — Acquisition and presentation of comparable multipoint data — Part 3: Environmental influences on properties
90.60 ISO/TC 61/SC 2
ISO/CD 11403-2
Plastics — Acquisition and presentation of comparable multipoint data — Part 2: Thermal and processing properties
30.99 ISO/TC 61/SC 2
ISO 11443:1995
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
95.99 ISO/TC 61/SC 5
ISO 11443:2005
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
95.99 ISO/TC 61/SC 5
ISO 11443:2014
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
90.60 ISO/TC 61/SC 5
ISO 11469:1993
Plastics — Generic identification and marking of plastic products
95.99 ISO/TC 61/SC 1
ISO 11469:2000
Plastics — Generic identification and marking of plastics products
95.99 ISO/TC 61/SC 1
ISO 11469:2016
Plastics — Generic identification and marking of plastics products
60.60 ISO/TC 61/SC 1
ISO 11907-1:1998
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: Guidance
95.99 ISO/TC 61/SC 4
ISO 11907-1:2019
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 1: General concepts and applicability
60.60 ISO/TC 61/SC 4
ISO 11907-2:1995
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method
90.93 ISO/TC 61/SC 4
ISO 11907-3:1998
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace
90.93 ISO/TC 61/SC 4
ISO 11907-4:1998
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
90.93 ISO/TC 61/SC 4
ISO 12000:1996
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Definitions and review of test methods
95.99 ISO/TC 61/SC 9
ISO 12058-1:1997
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
95.99 ISO/TC 61/SC 5
ISO 12058-1:2018
Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
60.60 ISO/TC 61/SC 5
ISO 12992:1995
Plastics — Vertical flame spread determination for film and sheet
95.99 ISO/TC 61/SC 4
ISO 12992:2017
Plastics — Vertical flame spread determination for film and sheet
60.60 ISO/TC 61/SC 4
ISO 13468-1:1996
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
95.99 ISO/TC 61/SC 5
ISO 13468-1:2019
Plastics — Determination of the total luminous transmittance of transparent materials — Part 1: Single-beam instrument
60.60 ISO/TC 61/SC 5
ISO 13468-2:1999
Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument
90.93 ISO/TC 61/SC 5
ISO 13586:2000
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
95.99 ISO/TC 61/SC 2
ISO 13586:2000/Amd 1:2003
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach — Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
95.99 ISO/TC 61/SC 2
ISO 13586:2018
Plastics — Determination of fracture toughness (GIC and KIC) — Linear elastic fracture mechanics (LEFM) approach
60.60 ISO/TC 61/SC 2
ISO 13741-1:1998
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method
90.60 ISO/TC 61/SC 9
ISO 13741-2:1998
Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method
90.60 ISO/TC 61/SC 9
ISO 13927:2001
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
95.99 ISO/TC 61/SC 4
ISO 13927:2015
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
60.60 ISO/TC 61/SC 4
ISO 13975:2012
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production
95.99 ISO/TC 61/SC 14
ISO 13975:2019
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production
60.60 ISO/TC 61/SC 14
ISO 14782:1999
Plastics — Determination of haze for transparent materials
90.93 ISO/TC 61/SC 5
ISO 14782:1999/Cor 1:2005
Plastics — Determination of haze for transparent materials — Technical Corrigendum 1
60.60 ISO/TC 61/SC 5
ISO 14851:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer
95.99 ISO/TC 61/SC 14
ISO 14851:1999/Cor 1:2005
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer — Technical Corrigendum 1
95.99 ISO/TC 61/SC 5
ISO 14851:2019
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer
60.60 ISO/TC 61/SC 14
ISO 14852:1999
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide
95.99 ISO/TC 61/SC 14
ISO 14852:1999/Cor 1:2005
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide — Technical Corrigendum 1
95.99 ISO/TC 61/SC 14
ISO 14852:2018
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by analysis of evolved carbon dioxide
60.60 ISO/TC 61/SC 14
ISO 14853:2005
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production
95.99 ISO/TC 61/SC 5
ISO 14853:2005/Cor 1:2009
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production — Technical Corrigendum 1
95.99 ISO/TC 61/SC 5
ISO 14853:2016
Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production
60.60 ISO/TC 61/SC 14
ISO 14855-1:2005
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method
95.99 ISO/TC 61/SC 5
ISO 14855-1:2005/Cor 1:2009
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method — Technical Corrigendum 1
95.99 ISO/TC 61/SC 5
ISO 14855-1:2012
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method
90.93 ISO/TC 61/SC 14
ISO 14855-2:2007
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
95.99 ISO/TC 61/SC 14
ISO 14855-2:2007/Cor 1:2009
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test — Technical Corrigendum 1
95.99 ISO/TC 61/SC 14
ISO 14855-2:2018
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
60.60 ISO/TC 61/SC 14
ISO 14855:1999
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide
95.99 ISO/TC 61/SC 5
ISO 14855:1999/Amd 1:2004
Determination of the ultimate aerobic biodegradability and disintegration of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Amendment 1: Use of activated vermiculite instead of mature compost
95.99 ISO/TC 61/SC 5
ISO 15033:2000
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
95.99 ISO/TC 61/SC 5
ISO 15033:2007
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
95.99 ISO/TC 61/SC 5
ISO 15033:2018
Plastics — Determination of caprolactam and its cyclic and linear oligomers by HPLC
60.60 ISO/TC 61/SC 5
ISO 15270:2006
Plastics — Guidelines for the recovery and recycling of plastics waste
95.99 ISO/TC 61
ISO 15270:2008
Plastics — Guidelines for the recovery and recycling of plastics waste
90.93 ISO/TC 61/SC 14
ISO 15314:2004
Plastics — Methods for marine exposure
95.99 ISO/TC 61/SC 6
ISO 15314:2018
Plastics — Methods for marine exposure
60.60 ISO/TC 61/SC 6
ISO 15512:1999
Plastics — Determination of water content
95.99 ISO/TC 61/SC 5
ISO 15512:2008
Plastics — Determination of water content
95.99 ISO/TC 61/SC 5
ISO 15512:2014
Plastics — Determination of water content
95.99 ISO/TC 61/SC 5
ISO 15512:2016
Plastics — Determination of water content
95.99 ISO/TC 61/SC 5
ISO 15512:2019
Plastics — Determination of water content
60.60 ISO/TC 61/SC 5
ISO 15791-1:2002
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
95.99 ISO/TC 61/SC 4
ISO 15791-1:2014
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance
90.60 ISO/TC 61/SC 4
ISO/TS 15791-2:2017
Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products
60.60 ISO/TC 61/SC 4
ISO 15850:2002
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
95.99 ISO/TC 61/SC 2
ISO 15850:2014
Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach
90.60 ISO/TC 61/SC 2
ISO 15985:2004
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas
95.99 ISO/TC 61/SC 5
ISO 15985:2004/Cor 1:2007
Plastics — Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions — Method by analysis of released biogas — Technical Corrigendum 1
95.99 ISO/TC 61/SC 5
ISO 15985:2014
Plastics — Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions — Method by analysis of released biogas
90.60 ISO/TC 61/SC 14
ISO 16012:2004
Plastics — Determination of linear dimensions of test specimens
95.99 ISO/TC 61/SC 2
ISO 16012:2004/Cor 1:2005
Plastics — Determination of linear dimensions of test specimens — Technical Corrigendum 1
95.99 ISO/TC 61/SC 2
ISO 16012:2015
Plastics — Determination of linear dimensions of test specimens
60.60 ISO/TC 61/SC 2
ISO 16014-1:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 16014-1:2003/Cor 1:2005
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles — Technical Corrigendum 1
95.99 ISO/TC 61/SC 5
ISO 16014-1:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 16014-1:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
60.60 ISO/TC 61/SC 5
ISO 16014-2:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
95.99 ISO/TC 61/SC 5
ISO 16014-2:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
95.99 ISO/TC 61/SC 5
ISO 16014-2:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
60.60 ISO/TC 61/SC 5
ISO 16014-3:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
95.99 ISO/TC 61/SC 5
ISO 16014-3:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
95.99 ISO/TC 61/SC 5
ISO 16014-3:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
60.60 ISO/TC 61/SC 5
ISO 16014-4:2003
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
95.99 ISO/TC 61/SC 5
ISO 16014-4:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
95.99 ISO/TC 61/SC 5
ISO 16014-4:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
60.60 ISO/TC 61/SC 5
ISO 16014-5:2012
Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 5: Method using light-scattering detection
95.99 ISO/TC 61/SC 5
ISO 16014-5:2019
Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
60.60 ISO/TC 61/SC 5
ISO 16152:2005
Plastics — Determination of xylene-soluble matter in polypropylene
90.60 ISO/TC 61/SC 9
ISO 16620-1:2015
Plastics — Biobased content — Part 1: General principles
60.60 ISO/TC 61/SC 14
ISO 16620-2:2015
Plastics — Biobased content — Part 2: Determination of biobased carbon content
90.92 ISO/TC 61/SC 14
ISO 16620-3:2015
Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content
60.60 ISO/TC 61/SC 14
ISO 16620-4:2016
Plastics — Biobased content — Part 4: Determination of biobased mass content
60.60 ISO/TC 61/SC 14
ISO 16620-5:2017
Plastics — Biobased content — Part 5: Declaration of biobased carbon content, biobased synthetic polymer content and biobased mass content
60.60 ISO/TC 61/SC 14
ISO/PRF 16620-2
Plastics — Biobased content — Part 2: Determination of biobased carbon content
50.20 ISO/TC 61/SC 14
ISO 16869:2001
Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
95.99 ISO/TC 61/SC 6
ISO 16869:2008
Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations
90.93 ISO/TC 61/SC 6
ISO 16929:2002
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
95.99 ISO/TC 61/SC 5
ISO 16929:2013
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
90.92 ISO/TC 61/SC 14
ISO/PRF 16929
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
50.20 ISO/TC 61/SC 14
ISO 17088:2008
Specifications for compostable plastics
95.99 ISO/TC 61/SC 5
ISO 17088:2012
Specifications for compostable plastics
90.92 ISO/TC 61/SC 14
ISO/CD 17088
Specifications for compostable plastics
30.99 ISO/TC 61/SC 14
ISO 17221:2014
Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)
90.93 ISO/TC 61/SC 5
ISO 17223:2014
Plastics — Determination of yellowness index and change in yellowness index
90.93 ISO/TC 61/SC 5
ISO 17281:2002
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
95.99 ISO/TC 61/SC 2
ISO 17281:2018
Plastics — Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
60.60 ISO/TC 61/SC 2
ISO 17282:2004
Plastics — Guide to the acquisition and presentation of design data
90.93 ISO/TC 61/SC 2
ISO 17422:2002
Plastics — Environmental aspects — General guidelines for their inclusion in standards
95.99 ISO/TC 61/SC 14
ISO 17422:2018
Plastics — Environmental aspects — General guidelines for their inclusion in standards
60.60 ISO/TC 61/SC 14
ISO 17541:2014
Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility
90.20 ISO/TC 61/SC 2
ISO 17556:2003
Plastics — Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
95.99 ISO/TC 61/SC 5
ISO 17556:2012
Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
95.99 ISO/TC 61/SC 14
ISO 17556:2019
Plastics — Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
60.60 ISO/TC 61/SC 14
ISO 17744:2004
Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method
90.93 ISO/TC 61/SC 5
ISO/TR 17801:2014
Plastics — Standard table for reference global solar spectral irradiance at sea level — Horizontal, relative air mass 1
60.60 ISO/TC 61/SC 6
ISO/DIS 18485
Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
40.98 ISO/TC 61/SC 2
ISO/TR 18486:2016
Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
95.99 ISO/TC 61/SC 6
ISO/TR 18486:2018
Plastics — Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
60.60 ISO/TC 61/SC 6
ISO 18830:2016
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sandy sediment interface — Method by measuring the oxygen demand in closed respirometer
60.60 ISO/TC 61/SC 14
ISO/TS 19022:2016
Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
90.93 ISO/TC 61/SC 6
ISO/TR 19032
Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
60.00 ISO/TC 61/SC 6
ISO/TR 19032:2006
Plastics — Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
90.92 ISO/TC 61/SC 6
ISO 19252:2008
Plastics — Determination of scratch properties
90.93 ISO/TC 61/SC 2
ISO/TS 19278:2019
Plastics — Instrumented micro-indentation test for hardness measurement
60.60 ISO/TC 61/SC 2
ISO 19679:2016
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
90.92 ISO/TC 61/SC 14
ISO/DIS 19679
Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide
40.00 ISO/TC 61/SC 14
ISO/CD 19721
Plastics — Abrasion test method for artificial turfs using combining UV exposure and mechanical wear
30.60 ISO/TC 61/SC 6
ISO 19929:2017
Plastics — Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
60.60 ISO/TC 61/SC 5
ISO 19935-1:2018
Plastics — Temperature modulated DSC — Part 1: General principles
60.60 ISO/TC 61/SC 5
ISO/CD 19935-3
Plastics — Temperature modulated DSC — Part 3: Separation of overlapping thermal transitions
30.60 ISO/TC 61/SC 5
ISO/DIS 19935-2
Plastics — Temperature modulated DSC — Part 2: Measurement of accurate specific heat Cp
40.60 ISO/TC 61/SC 5
ISO/TR 20118:2019
Plastics — Guidance on fire characteristics and fire performance of PVC materials used in building applications
60.60 ISO/TC 61/SC 4
ISO 20200:2004
Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
95.99 ISO/TC 61/SC 5
ISO 20200:2015
Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
60.60 ISO/TC 61/SC 14
ISO/DIS 20329
Plastics - Determination of abrasive wear resistance by sliding friction
40.60 ISO/TC 61/SC 2
ISO 20753:2008
Plastics — Test specimens
95.99 ISO/TC 61/SC 2
ISO 20753:2018
Plastics — Test specimens
60.60 ISO/TC 61/SC 2
ISO 20965:2005
Plastics — Determination of the transient extensional viscosity of polymer melts
90.60 ISO/TC 61/SC 5
ISO 21367:2007
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
90.93 ISO/TC 61/SC 4
ISO 21475:2019
Plastics — Methods of exposure to determine the wavelength dependent degradation using spectrally dispersed radiation
60.60 ISO/TC 61/SC 6
ISO/CD 21488
Plastics - Method for exposing polyolefins outdoors combining natural and artificial irradiation
30.60 ISO/TC 61/SC 6
ISO 21509:2006
Plastics and ebonite — Verification of Shore durometers
90.93 ISO/TC 61/SC 2
ISO 21702:2019
Measurement of antiviral activity on plastics and other non-porous surfaces
60.60 ISO/TC 61/SC 6
ISO/PRF TR 21960
Plastics in the Environment — Current state of knowledge and methodologies
50.00 ISO/TC 61/SC 14
ISO 22007-1:2009
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
95.99 ISO/TC 61/SC 5
ISO 22007-1:2017
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
60.60 ISO/TC 61/SC 5
ISO 22007-2:2008
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
95.99 ISO/TC 61/SC 5
ISO 22007-2:2015
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
60.60 ISO/TC 61/SC 5
ISO 22007-3:2008
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
90.93 ISO/TC 61/SC 5
ISO 22007-4:2008
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
95.99 ISO/TC 61/SC 5
ISO 22007-4:2017
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
60.60 ISO/TC 61/SC 5
ISO 22007-6:2014
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
90.93 ISO/TC 61/SC 5
ISO/TR 22007-5:2011
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
60.60 ISO/TC 61/SC 5
ISO 22088-1:2006
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 1: General guidance
90.93 ISO/TC 61/SC 6
ISO 22088-2:2006
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method
90.93 ISO/TC 61/SC 6
ISO 22088-3:2006
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 3: Bent strip method
90.93 ISO/TC 61/SC 6
ISO 22088-4:2006
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 4: Ball or pin impression method
90.93 ISO/TC 61/SC 6
ISO 22088-5:2006
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 5: Constant tensile deformation method
90.93 ISO/TC 61/SC 6
ISO 22088-6:2006
Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 6: Slow strain rate method
90.93 ISO/TC 61/SC 6
ISO 22196:2007
Plastics — Measurement of antibacterial activity on plastics surfaces
95.99 ISO/TC 61/SC 6
ISO 22196:2011
Measurement of antibacterial activity on plastics and other non-porous surfaces
90.93 ISO/TC 61/SC 6
ISO/DIS 22403
Plastics — Assessment of the inherent aerobic biodegradability and environmental safety of non-floating materials exposed to marine inocula under laboratory and mesophilic conditions — Test methods and requirements
40.20 ISO/TC 61/SC 14
ISO 22404:2019
Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide
60.60 ISO/TC 61/SC 14
ISO/DIS 22526-2
Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
40.99 ISO/TC 61/SC 14
ISO/DIS 22526-3
Plastics — Carbon and environmental footprint of biobased plastics — Part 3: Process carbon footprint, requirements and guidelines for quantification
40.60 ISO/TC 61/SC 14
ISO/FDIS 22526-1
Plastics — Carbon and environmental footprint of biobased plastics — Part 1: General principles
50.00 ISO/TC 61/SC 14
ISO/DIS 22766
Plastics — Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions
40.99 ISO/TC 61/SC 14
ISO/CD 23673
Plastics — Elasticity index — Determination of elastic property of melts
30.60 ISO/TC 61/SC 5
ISO/DIS 23706
Plastics — Determination of apparent activation energies of property changes in standard weathering test methods
40.00 ISO/TC 61/SC 6
ISO/CD 23741
Determination of spray water delivery during spray cycles in weathering tests
30.60 ISO/TC 61/SC 6
ISO/CD 23976
Plastics — Fast differential scanning calorimetry — Chip calorimetry
30.60 ISO/TC 61/SC 5
ISO/CD 23977-1
Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 1: Method by analysis of evolved carbon dioxide
30.60 ISO/TC 61/SC 14
ISO/CD 23977-2
Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 2: Method by measuring the oxygen demand in closed respirometer
30.60 ISO/TC 61/SC 14
ISO 25337:2010
Plastics — Production quality control — Statistical method for using single measurements
90.93 ISO/TC 61/SC 5
ISO 25762:2009
Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
90.93 ISO/TC 61/SC 4
ISO/DIS 26723
Plastics — Determination of total luminous transmittance and reflectance
40.60 ISO/TC 61/SC 5
ISO/CD TS 28660
Plastics — Determination of J-R curves
30.60 ISO/TC 61/SC 2
ISO 29221:2014
Plastics — Determination of mode I plane-strain crack-arrest toughness
90.60 ISO/TC 61/SC 2
ISO 29664:2010
Plastics — Artificial weathering including acidic deposition
90.93 ISO/TC 61/SC 6
ISO 30021:2013
Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
90.93 ISO/TC 61/SC 4
IEC 60695-11-10:1999
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods
95.99 ISO/TC 61/SC 4
IEC 60695-11-10:1999/Amd 1:2003
Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1
95.99 ISO/TC 61/SC 4
IEC 60695-11-20:1999
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
95.99 ISO/TC 61/SC 4
IEC 60695-11-20:1999/Amd 1:2003
Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1
95.99 ISO/TC 61/SC 4

No matching records found