Steel strips for springs, see 77.140.25
  • Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 86:1974
Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
95.99 ISO/TC 164/SC 1
ISO/R 87:1959
Simple bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
ISO/R 88:1959
Reverse bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
ISO/R 149:1960
Modified Erichsen cupping test for steel sheet and strip
95.99 ISO/TC 164/SC 2
ISO/R 388:1964
ISO metric series for basic thicknesses of sheet and diameters of wire
95.99 ISO/TC 62
ISO 630:1980
Structural steels
95.99 ISO/TC 17/SC 3
ISO 1111-1:1983
Single cold-reduced tinplate and single cold-reduced blackplate — Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet
95.99 ISO/TC 17
ISO 1111-2:1983
Single cold-reduced tinplate and single cold-reduced blackplate — Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form
95.99 ISO/TC 17
ISO 3573:1976
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3573:1986
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3573:1999
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3573:2008
Hot-rolled carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3573:2012
Hot-rolled carbon steel sheet of commercial and drawing qualities
90.60 ISO/TC 17/SC 12
ISO 3574:1976
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3574:1986
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3574:1999
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3574:2008
Cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3574:2012
Cold-reduced carbon steel sheet of commercial and drawing qualities
90.60 ISO/TC 17/SC 12
ISO 3575:1976
Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3575:1996
Continuous hot-dip zinc-coated carbon steel sheet of commercial, lock-forming and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3575:2005
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3575:2011
Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 3575:2016
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
60.60 ISO/TC 17/SC 12
ISO 3576:1976
Hot-rolled carbon steel sheet coils for the production of cold-reduced products
95.99 ISO/TC 17/SC 12
ISO 3798:1976
Tinplate and blackplate — Minimum packaging requirements
95.99 ISO/TC 17
ISO 4950-1:1981
High yield strength flat steel products — Part 1: General requirements
95.99 ISO/TC 17/SC 3
ISO 4950-1:1995
High yield strength flat steel products — Part 1: General requirements
90.93 ISO/TC 17/SC 3
ISO 4950-1:1995/Amd 1:2003
High yield strength flat steel products — Part 1: General requirements — Amendment 1
60.60 ISO/TC 17/SC 3
ISO 4950-2:1981
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
95.99 ISO/TC 17/SC 3
ISO 4950-2:1995
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition
90.93 ISO/TC 17/SC 3
ISO 4950-2:1995/Amd 1:2003
High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition — Amendment 1
60.60 ISO/TC 17/SC 3
ISO 4950-3:1981
High yield strength flat steel products — Part 3: Products supplied in the heat- treated (quenched + tempered) condition
95.99 ISO/TC 17/SC 3
ISO 4950-3:1995
High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition
90.93 ISO/TC 17/SC 3
ISO 4950-3:1995/Amd 1:2003
High yield strength flat steel products — Part 3: Products supplied in the heat-treated (quenched + tempered) condition — Amendment 1
60.60 ISO/TC 17/SC 3
ISO 4960:1986
Cold-reduced carbon steel strip with a carbon content over 0,25 %
95.99 ISO/TC 17/SC 12
ISO 4960:1999
Cold-reduced carbon steel strip with a carbon content over 0,25 %
95.99 ISO/TC 17/SC 12
ISO 4960:2007
Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 %
95.99 ISO/TC 17/SC 12
ISO 4960:2019
Steel strip, cold-reduced with a mass fraction of carbon over 0,25 %
60.60 ISO/TC 17/SC 12
ISO 4977-1:1984
Double cold-reduced electrolytic tinplate — Part 1: Sheet
95.99 ISO/TC 17
ISO 4977-2:1988
Double cold-reduced electrolytic tinplate — Part 2: Coil for subsequent cutting into sheets
95.99 ISO/TC 17
ISO 4995:1978
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4995:1991
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4995:1993
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4995:2001
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4995:2008
Hot-rolled steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4995:2014
Hot-rolled steel sheet of structural quality
90.20 ISO/TC 17/SC 12
ISO 4996:1978
Hot rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
ISO 4996:1991
Hot-rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
ISO 4996:1999
Hot-rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
ISO 4996:2007
Hot-rolled steel sheet of high yield stress structural quality
95.99 ISO/TC 17/SC 12
ISO 4996:2014
Hot-rolled steel sheet of high yield stress structural quality
60.60 ISO/TC 17/SC 12
ISO 4997:1978
Cold-reduced steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4997:1991
Cold-reduced steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4997:1999
Cold-reduced steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4997:2007
Cold-reduced carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4997:2015
Cold-reduced carbon steel sheet of structural quality
60.60 ISO/TC 17/SC 12
ISO 4998:1977
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4998:1991
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4998:1996
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4998:2005
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4998:2011
Continuous hot-dip zinc-coated carbon steel sheet of structural quality
95.99 ISO/TC 17/SC 12
ISO 4998:2014
Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality
90.60 ISO/TC 17/SC 12
ISO 4999:1978
Continuous hot-dip terne (lead alloy) coated cold reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 4999:1991
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 4999:1999
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial drawing and structural qualities
95.99 ISO/TC 17/SC 12
ISO 4999:2005
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
ISO 4999:2011
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
ISO 4999:2014
Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
ISO 5000:1980
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5000:1993
Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5000:2005
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5000:2011
Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5000:2019
Steel sheet, aluminium-silicon alloy-coated by the continuous hot-dip process, of commercial and drawing qualities
60.60 ISO/TC 17/SC 12
ISO 5001:1980
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
ISO 5001:1993
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
ISO 5001:1999
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
ISO 5001:2007
Cold-reduced carbon steel sheet for vitreous enamelling
95.99 ISO/TC 17/SC 12
ISO 5001:2012
Cold-reduced carbon steel sheet for vitreous enamelling
90.60 ISO/TC 17/SC 12
ISO 5002:1982
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5002:1999
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5002:2008
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5002:2013
Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities
90.60 ISO/TC 17/SC 12
ISO 5950:1979
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5950:1991
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5950:2000
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5950:2008
Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 5950:2012
Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities
90.60 ISO/TC 17/SC 12
ISO 5951:1980
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
ISO 5951:1993
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
ISO 5951:2001
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
ISO 5951:2008
Hot-rolled steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
ISO 5951:2013
Hot-rolled steel sheet of higher yield strength with improved formability
90.60 ISO/TC 17/SC 12
ISO 5952:1983
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
ISO 5952:1998
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
ISO 5952:2005
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
ISO 5952:2011
Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
95.99 ISO/TC 17/SC 12
ISO 5952:2019
Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance
60.60 ISO/TC 17/SC 12
ISO 5954:1984
Cold-reduced carbon steel sheet to hardness requirements
95.99 ISO/TC 17/SC 12
ISO 5954:1998
Cold-reduced carbon steel sheet according to hardness requirements
95.99 ISO/TC 17/SC 12
ISO 5954:2007
Cold-reduced carbon steel sheet according to hardness requirements
95.99 ISO/TC 17/SC 12
ISO 5954:2014
Cold-reduced carbon steel sheet according to hardness requirements
90.60 ISO/TC 17/SC 12
ISO 6316:1982
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
ISO 6316:1993
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
ISO 6316:2000
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
ISO 6316:2008
Hot-rolled steel strip of structural quality
95.99 ISO/TC 17/SC 12
ISO 6316:2012
Hot-rolled steel strip of structural quality
90.60 ISO/TC 17/SC 12
ISO 6317:1982
Hot-rolled carbon steel strip of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 6317:2000
Hot-rolled carbon steel strip of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 6317:2008
Hot-rolled carbon steel strip of commercial and drawing qualities
95.99 ISO/TC 17/SC 12
ISO 6930-1:2001
High yield strength steel plates and wide flats for cold forming — Part 1: Delivery conditions for thermomechanically-rolled steels
95.99 ISO/TC 17/SC 3
ISO 6930-2:2004
High yield strength steel plates and wide flats for cold forming — Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels
95.99 ISO/TC 17/SC 3
ISO 6930:1983
High yield strength flat steel products for cold forming
95.99 ISO/TC 17/SC 3
ISO 6930:2019
High yield strength steel plates and wide flats for cold forming — Delivery conditions
60.60 ISO/TC 17/SC 3
ISO 6932:1986
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
95.99 ISO/TC 17/SC 12
ISO 6932:2001
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
95.99 ISO/TC 17/SC 12
ISO 6932:2008
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
95.99 ISO/TC 17/SC 12
ISO 6932:2014
Cold-reduced carbon steel strip with a maximum carbon content of 0,25 %
90.60 ISO/TC 17/SC 12
ISO 7452:1984
Hot-rolled structural steel plates — Tolerances on dimensions and shape
95.99 ISO/TC 17/SC 3
ISO 7452:2002
Hot-rolled structural steel plates — Tolerances on dimensions and shape
95.99 ISO/TC 17/SC 3
ISO 7452:2013
Hot-rolled steel plates — Tolerances on dimensions and shape
90.93 ISO/TC 17/SC 3
ISO 7778:1983
Steel plate with specified through-thickness characteristics
95.99 ISO/TC 17/SC 3
ISO 7778:2014
Through-thickness characteristics for steel products
90.60 ISO/TC 17/SC 3
ISO 7788:1985
Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
90.92 ISO/TC 17/SC 3
ISO/WD 7788
Steel — Surface finish of hot-rolled plates and wide flats — Delivery requirements
20.20 ISO/TC 17/SC 3
ISO 8110-1:1988
Single cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
95.99 ISO/TC 17
ISO 8111-1:1988
Double cold-reduced electrolytic chromium/ chromium oxide-coated steel — Part 1: Sheets
95.99 ISO/TC 17
ISO 9034:1987
Hot-rolled structural steel wide flats — Tolerances on dimensions and shape
90.93 ISO/TC 17/SC 3
ISO 9328-1:1991
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 1: General requirements
95.99 ISO/TC 17/SC 10
ISO 9328-1:2003
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
95.99 ISO/TC 17/SC 10
ISO 9328-1:2011
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
95.99 ISO/TC 17/SC 10
ISO 9328-1:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
60.60 ISO/TC 17/SC 10
ISO 9328-2:1991
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and low-alloyed steels with specified room temperature and elevated temperature properties
95.99 ISO/TC 17/SC 10
ISO 9328-2:2004
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
95.99 ISO/TC 17/SC 10
ISO 9328-2:2011
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
95.99 ISO/TC 17/SC 10
ISO 9328-2:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
60.60 ISO/TC 17/SC 10
ISO 9328-3:1991
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 3: Nickel-alloyed steels with specified low temperature properties
95.99 ISO/TC 17/SC 10
ISO 9328-3:2004
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
95.99 ISO/TC 17/SC 10
ISO 9328-3:2011
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
95.99 ISO/TC 17/SC 10
ISO 9328-3:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
60.60 ISO/TC 17/SC 10
ISO 9328-4:1991
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition
95.99 ISO/TC 17/SC 10
ISO 9328-4:2004
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
95.99 ISO/TC 17/SC 10
ISO 9328-4:2011
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
95.99 ISO/TC 17/SC 10
ISO 9328-4:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
60.60 ISO/TC 17/SC 10
ISO 9328-5:1991
Steel plates and strips for pressure purposes — Technical delivery conditions — Part 5: Austenitic steels
95.99 ISO/TC 17/SC 10
ISO 9328-5:2004
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
95.99 ISO/TC 17/SC 10
ISO 9328-5:2011
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
95.99 ISO/TC 17/SC 10
ISO 9328-5:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechanically rolled
60.60 ISO/TC 17/SC 10
ISO 9328-6:2004
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
95.99 ISO/TC 17/SC 10
ISO 9328-6:2011
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
95.99 ISO/TC 17/SC 10
ISO 9328-6:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
60.60 ISO/TC 17/SC 10
ISO 9328-7:2004
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
95.99 ISO/TC 17/SC 10
ISO 9328-7:2011
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
95.99 ISO/TC 17/SC 10
ISO 9328-7:2018
Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
60.60 ISO/TC 17/SC 10
ISO 9364:1991
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, lock-forming and structural qualities
95.99 ISO/TC 17/SC 12
ISO 9364:2001
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
ISO 9364:2006
Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
ISO 9364:2011
Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities
95.99 ISO/TC 17/SC 12
ISO 9364:2017
Steel sheet, 55 % aluminium-zinc alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
60.60 ISO/TC 17/SC 12
ISO 9444-1:2009
Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths
90.93 ISO/TC 17/SC 4
ISO 9444-2:2009
Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate
90.93 ISO/TC 17/SC 4
ISO 9444:1990
Hot-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
ISO 9444:2002
Continuously hot-rolled stainless steel strip, plate/sheet and cut lengths — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
ISO 9445-1:2009
Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths
90.20 ISO/TC 17/SC 4
ISO 9445-2:2009
Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet
90.20 ISO/TC 17/SC 4
ISO 9445:1990
Cold-rolled stainless steel wide strip and sheet — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
ISO 9445:2002
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
ISO 9446:1990
Hot-rolled stainless steel narrow strip — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
ISO 9447:1990
Cold-rolled stainless steel narrow strip — Tolerances on dimensions and form
95.99 ISO/TC 17/SC 4
ISO 9473-1:2006
Textile machinery and accessories — Strip steel for dents of reeds — Part 1: Cold rolled strip steel
90.93 ISO/TC 72/SC 3
ISO 9473-2:2006
Textile machinery and accessories — Strip steel for dents of reeds — Part 2: Hardened strip steel
90.93 ISO/TC 72/SC 3
ISO 9473:1988
Textile machinery and accessories — Strip steel for dents of reeds
95.99 ISO/TC 72/SC 3
ISO 10384:1992
Hot-rolled carbon steel sheet for machinery
95.99 ISO/TC 17/SC 12
ISO 10384:2001
Hot-rolled carbon steel sheet as defined by chemical composition
95.99 ISO/TC 17/SC 12
ISO 10384:2008
Hot-rolled carbon steel sheet as defined by chemical composition
95.99 ISO/TC 17/SC 12
ISO 10384:2012
Hot-rolled carbon steel sheet as defined by chemical composition
90.60 ISO/TC 17/SC 12
ISO 11949:1995
Cold-reduced electrolytic tinplate
95.99 ISO/TC 17/SC 9
ISO 11949:2016
Cold-reduced tinmill products — Electrolytic tinplate
60.60 ISO/TC 17/SC 9
ISO 11950:1995
Cold-reduced electrolytic chromium/chromium oxide-coated steel
95.99 ISO/TC 17/SC 9
ISO 11950:2016
Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel
60.60 ISO/TC 17/SC 9
ISO 11951:1995
Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel
95.99 ISO/TC 17/SC 9
ISO 11951:2016
Cold-reduced tinmill products — Blackplate
60.60 ISO/TC 17/SC 9
ISO 13887:1995
Cold-reduced steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
ISO 13887:2004
Cold-reduced steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
ISO 13887:2011
Cold-reduced steel sheet of higher yield strength with improved formability
95.99 ISO/TC 17/SC 12
ISO 13887:2017
Steel sheet, cold-reduced, of higher yield strength with improved formability
60.60 ISO/TC 17/SC 12
ISO 13976:1998
Hot-rolled steel sheet in coils of structural quality and heavy thickness
95.99 ISO/TC 17/SC 12
ISO 13976:2005
Hot-rolled steel sheet in coils of structural quality and heavy thickness
95.99 ISO/TC 17/SC 12
ISO 13976:2016
Hot-rolled steel sheet in coils of structural quality and heavy thickness
60.60 ISO/TC 17/SC 12
ISO 14590:1999
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
95.99 ISO/TC 17/SC 12
ISO 14590:2005
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
95.99 ISO/TC 17/SC 12
ISO 14590:2016
Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
60.60 ISO/TC 17/SC 12
ISO 14788:1998
Continuous hot-dip zinc-5 %/aluminium alloy coated steel sheets and coils
95.99 ISO/TC 17/SC 12
ISO 14788:2005
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
95.99 ISO/TC 17/SC 12
ISO 14788:2011
Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet
95.99 ISO/TC 17/SC 12
ISO 14788:2017
Steel sheet, zinc-5 % aluminium alloy-coated by the continuous hot-dip process, of commercial, drawing and structural qualities
60.60 ISO/TC 17/SC 12
ISO 15177:2012
Hot-rolled twin-roll cast carbon steel sheet of commercial quality
90.92 ISO/TC 17/SC 12
ISO/CD 15177
Hot-rolled twin-roll cast carbon steel sheet of commercial quality
30.60 ISO/TC 17/SC 12
ISO 15179:2012
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
90.92 ISO/TC 17/SC 12
ISO/CD 15179
Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
30.60 ISO/TC 17/SC 12
ISO 15208:2012
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
90.92 ISO/TC 17/SC 12
ISO/CD 15208
Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
30.60 ISO/TC 17/SC 12
ISO 15211:2012
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
90.92 ISO/TC 17/SC 12
ISO/CD 15211
Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
30.60 ISO/TC 17/SC 12
ISO 15812:2001
Continuous mill flat rolled products — Guidelines for improved ordering communication
95.99 ISO/TC 17/SC 12
ISO 16160:2000
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16160:2005
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16160:2011
Continuously hot-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16160:2012
Hot-rolled steel sheet products — Dimensional and shape tolerances
90.60 ISO/TC 17/SC 12
ISO 16162:2000
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16162:2005
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16162:2010
Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16162:2012
Cold-rolled steel sheet products — Dimensional and shape tolerances
90.60 ISO/TC 17/SC 12
ISO 16163:2000
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16163:2005
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16163:2010
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
95.99 ISO/TC 17/SC 12
ISO 16163:2012
Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
90.60 ISO/TC 17/SC 12
ISO 16172:2006
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
95.99 ISO/TC 17/SC 12
ISO 16172:2011
Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe
95.99 ISO/TC 17/SC 12
ISO 16172:2018
Steel sheet, metallic-coated by the continuous hot-dip process for corrugated steel pipe
60.60 ISO/TC 17/SC 12
ISO 17577:2006
Steel — Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm
95.99 ISO/TC 17/SC 7
ISO 17577:2016
Steel — Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm
60.60 ISO/TC 17/SC 7
ISO 18286:2004
Hot-rolled stainless steel plates — Tolerances on dimensions and shape
95.99 ISO/TC 17/SC 4
ISO 18286:2008
Hot-rolled stainless steel plates — Tolerances on dimensions and shape
90.93 ISO/TC 17/SC 4
ISO 20805:2005
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
95.99 ISO/TC 17/SC 12
ISO 20805:2011
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
95.99 ISO/TC 17/SC 12
ISO 20805:2017
Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming
60.60 ISO/TC 17/SC 12

No matching records found. Please try changing the filter settings.