Standards catalogue

77.040.10 - Mechanical testing of metals

Mechanical testing, see 19.060
Welded joints and welds, see 25.160.40
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO/R 79:1968 [Withdrawn]
Brinell hardness test for steel
95.99 ISO/TC 164/SC 3
ISO/R 80:1968 [Withdrawn]
Rockwell hardness test (B and C scales) for steel
95.99 ISO/TC 164/SC 3
ISO/R 81:1967 [Withdrawn]
Vickers hardness test for steel (Load 5 to 100 kgf)
95.99 ISO/TC 164/SC 3
ISO 82:1974 [Withdrawn]
Steel -- Tensile testing
95.99 ISO/TC 164/SC 1
ISO 83:1976 [Withdrawn]
Steel -- Charpy impact test (U-notch)
95.99 ISO/TC 164/SC 4
ISO/R 84:1959 [Withdrawn]
Izod impact test for steel
95.99 ISO/TC 164/SC 4
ISO/R 85:1959 [Withdrawn]
Bend test for steel
95.99 ISO/TC 164/SC 2
ISO 86:1974 [Withdrawn]
Steel -- Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick
95.99 ISO/TC 164/SC 1
ISO/R 87:1959 [Withdrawn]
Simple bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
ISO/R 88:1959 [Withdrawn]
Reverse bend testing of steel sheet and strip less than 3 mm thick
95.99 ISO/TC 164/SC 2
ISO 89:1974 [Withdrawn]
Steel -- Tensile testing of wire
95.99 ISO/TC 164/SC 1
ISO 136:1972 [Withdrawn]
Steel -- Simple torsion testing of wire
95.99 ISO/TC 164/SC 2
ISO 144:1973 [Withdrawn]
Steel -- Reverse bend testing of wire
95.99 ISO/TC 164/SC 2
ISO/R 145:1960 [Withdrawn]
Wrapping test for steel wire
95.99 ISO/TC 164/SC 2
ISO 146:1984 [Withdrawn]
Metallic materials -- Hardness test -- Verification of Vickers hardness testing machines HV 0,2 to HV 100
95.99 ISO/TC 164/SC 3
ISO/R 146:1968 [Withdrawn]
Verification of Vickers hardness testing machines
95.99 ISO/TC 164
ISO 146-2:1993 [Withdrawn]
Metallic materials -- Verification of Vickers hardness testing machines -- Part 2: Less than HV 0,2
95.99 ISO/TC 164/SC 3
ISO/R 147:1960 [Withdrawn]
Load calibration of testing machines for tensile testing of steel
95.99 ISO/TC 164/SC 1
ISO 148:1983 [Withdrawn]
Steel -- Charpy impact test (V-notch)
95.99 ISO/TC 164/SC 4
ISO 148-1:2006 [Withdrawn]
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method
95.99 ISO/TC 164/SC 4
ISO 148-1:2009 [Withdrawn]
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method
95.99 ISO/TC 164/SC 4
ISO 148-1:2016
Metallic materials -- Charpy pendulum impact test -- Part 1: Test method
60.60 ISO/TC 164/SC 4
ISO 148-2:1998 [Withdrawn]
Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of test machines
95.99 ISO/TC 164/SC 4
ISO 148-2:2008 [Withdrawn]
Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines
95.99 ISO/TC 164/SC 4
ISO 148-2:2016
Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines
60.60 ISO/TC 164/SC 4
ISO 148-3:1998 [Withdrawn]
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines
95.99 ISO/TC 164/SC 4
ISO 148-3:2008 [Withdrawn]
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
95.99 ISO/TC 164/SC 4
ISO 148-3:2016
Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
60.60 ISO/TC 164/SC 4
ISO/R 149:1960 [Withdrawn]
Modified Erichsen cupping test for steel sheet and strip
95.99 ISO/TC 164/SC 2
ISO 156:1982 [Withdrawn]
Metallic materials -- Hardness test -- Verification of Brinell hardness testing machines
95.99 ISO/TC 164/SC 3
ISO/R 165:1960 [Withdrawn]
Flanging test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 166:1960 [Withdrawn]
Drift expanding test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 167:1960 [Withdrawn]
Bend test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 184:1961 [Withdrawn]
Brinell hardness test for grey cast iron
95.99 ISO/TC 25
ISO/R 190:1961 [Withdrawn]
Tensile testing of light metals and their alloys
95.99 ISO/TC 164/SC 1
ISO/R 191:1971 [Withdrawn]
Brinell hardness test for light metals and their alloys
95.99 ISO/TC 164/SC 3
ISO/R 192:1971 [Withdrawn]
Wickers hardness test for light metals and their alloys
95.99 ISO/TC 164/SC 3
ISO/R 195:1961 [Withdrawn]
Drift expanding test on copper and copper alloy tubes
95.99 ISO/TC 164/SC 2
ISO/R 202:1961 [Withdrawn]
Flattening test on steel tubes
95.99 ISO/TC 164/SC 2
ISO/R 203:1961 [Withdrawn]
Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
95.99 ISO/TC 164/SC 1
ISO 204:1997 [Withdrawn]
Metallic materials -- Uninterrupted uniaxial creep testing in tension -- Method of test
95.99 ISO/TC 164/SC 1
ISO 204:2009
Metallic materials -- Uniaxial creep testing in tension -- Method of test
90.92 ISO/TC 164/SC 1
ISO/CD 204 [Under development]
Metallic materials -- Uniaxial creep testing in tension -- Method of test
30.99 ISO/TC 164/SC 1
ISO/R 204:1961 [Withdrawn]
Non-interrupted creep testing of steel at elevated temperatures
95.99 ISO/TC 164/SC 1
ISO/R 205:1961 [Withdrawn]
Determination of proof stress and proving test for steel at elevated temperature
95.99 ISO/TC 17/SC 20
ISO/R 206:1961 [Withdrawn]
Creep stress rupture testing of steel at elevated temperatures
95.99 ISO/TC 164/SC 1
ISO/R 373:1964 [Withdrawn]
General principles for fatigue testing of metals
95.99 ISO/TC 164/SC 5
ISO/R 374:1964 [Withdrawn]
Ring expanding test on steel tubes
95.99 ISO/TC 164/SC 2
ISO 375:1974 [Withdrawn]
Steel -- Tensile testing of tubes
95.99 ISO/TC 164/SC 1
ISO 376:1987 [Withdrawn]
Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
ISO 376:1999 [Withdrawn]
Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
ISO 376:2004 [Withdrawn]
Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
95.99 ISO/TC 164/SC 1
ISO 376:2011
Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines
90.60 ISO/TC 164/SC 1
ISO/R 376:1964 [Withdrawn]
Calibration of elastic proving devices
95.99 ISO/TC 164/SC 1
ISO 377:1985 [Withdrawn]
Wrought steel -- Selection and preparation of samples and test pieces
95.99 ISO/TC 17/SC 20
ISO 377:1997 [Withdrawn]
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
95.99 ISO/TC 17/SC 20
95.99 ISO/TC 17/SC 20
ISO 377:2013
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
90.92 ISO/TC 17/SC 20
ISO/FDIS 377 [Under development]
Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing
50.20 ISO/TC 17/SC 20
ISO 377-1:1989 [Withdrawn]
Selection and preparation of samples and test pieces of wrought steels -- Part 1: Samples and test pieces for mechanical test
95.99 ISO/TC 17/SC 20
ISO/R 397:1964 [Withdrawn]
Wrapping test for copper and copper alloy wire
95.99 ISO/TC 164/SC 2
ISO/R 398:1964 [Withdrawn]
Bend test for copper and copper alloys
95.99 ISO/TC 164/SC 2
ISO/R 399:1964 [Withdrawn]
Vickers hardness test for copper and copper alloys (Test loads from 2.5 to 50 kgf)
95.99 ISO/TC 164/SC 3
ISO/R 400:1964 [Withdrawn]
Tensile testing of copper and copper alloys
95.99 ISO/TC 164/SC 1
ISO/R 401:1964 [Withdrawn]
Tensile testing of copper and copper alloy tubes of circular section
95.99 ISO/TC 164/SC 1
ISO/R 402:1964 [Withdrawn]
Tensile testing of copper and copper alloy wire
95.99 ISO/TC 164/SC 1
ISO/R 403:1964 [Withdrawn]
Brinell hardness test for copper and copper alloys
95.99 ISO/TC 164/SC 3
ISO/R 409:1964 [Withdrawn]
Tables of Vickers hardness values (HV) for metallic materials
95.99 ISO/TC 164/SC 3
ISO 409-1:1982 [Withdrawn]
Metallic materials -- Hardness test -- Tables of Vickers hardness values for use in tests made on flat surfaces -- Part 1: HV 5 to HV 100
95.99 ISO/TC 164/SC 3
ISO 409-2:1983 [Withdrawn]
Metallic materials -- Hardness test -- Tables of Vickers hardness values for use in tests made on flat surfaces -- Part 2: HV 0,2 to less than HV 5
95.99 ISO/TC 164/SC 3
ISO 410:1982 [Withdrawn]
Metallic materials -- Hardness test -- Tables of Brinell hardness values for use in tests made on flat surfaces
95.99 ISO/TC 164/SC 3
ISO/R 442:1965 [Withdrawn]
Verification of pendulum impact testing machines for testing steels
95.99 ISO/TC 164/SC 4
ISO 640:1984 [Withdrawn]
Metallic materials -- Hardness test -- Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100
95.99 ISO/TC 164/SC 3
ISO/R 640:1967 [Withdrawn]
Calibration of standardized blocks to be used for Vickers hardness testing machines
95.99 ISO/TC 164
ISO 640-2:1993 [Withdrawn]
Metallic materials -- Calibration of standardized blocks to be used for Vickers hardness testing machines -- Part 2: Less than HV 0,2
95.99 ISO/TC 164/SC 3
ISO 674:1988 [Withdrawn]
Metallic materials -- Hardness test -- Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
ISO/R 674:1968 [Withdrawn]
Calibration of standardized blocks to be used for Rockwell B and C scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 716:1986 [Withdrawn]
Metallic materials -- Hardness test -- Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
ISO/R 716:1968 [Withdrawn]
Verification of Rockwell B and C scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 726:1982 [Withdrawn]
Metallic materials -- Hardness test -- Calibration of standardized blocks to be used for Brinell hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 783:1989 [Withdrawn]
Metallic materials -- Tensile testing at elevated temperature
95.99 ISO/TC 164/SC 1
ISO 783:1999 [Withdrawn]
Metallic materials -- Tensile testing at elevated temperature
95.99 ISO/TC 164/SC 1
ISO/R 783:1968 [Withdrawn]
Mechanical testing of steel at elevated temperatures -- Determination of lower yield stress and proof stress and proving test
95.99 ISO/TC 164/SC 1
ISO 946:1975 [Withdrawn]
Grey cast iron -- Beam unnotched impact test
95.99 ISO/TC 25
ISO/R 952:1969 [Withdrawn]
Tensile testing of light metal and light metal alloy tubes
95.99 ISO/TC 164/SC 1
ISO/R 953:1969 [Withdrawn]
Drift expanding test on light metal and light metal alloy tubes
95.99 ISO/TC 164/SC 2
ISO/R 954:1969 [Withdrawn]
Simple bend test for light metal and light metal alloy sheet and strip of thickness between 0,2 mm (0.008 in) and 7 mm (0.25 in)
95.99 ISO/TC 164/SC 2
ISO/R 955:1969 [Withdrawn]
Flattening test on aluminium and aluminium alloy tubes
95.99 ISO/TC 164/SC 2
ISO/R 956:1969 [Withdrawn]
Tensile test for light metal and light metal alloy wires
95.99 ISO/TC 164/SC 1
ISO/R 957:1969 [Withdrawn]
Simple torsion test for aluminium and aluminium alloy wire
95.99 ISO/TC 164/SC 2
ISO/R 958:1969 [Withdrawn]
Wrapping test for aluminium and aluminium alloy wire
95.99 ISO/TC 164/SC 2
ISO 1024:1989 [Withdrawn]
Metallic materials -- Hardness test -- Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99 ISO/TC 164/SC 3
ISO/R 1024:1969 [Withdrawn]
Rockwell superficial hardness test (N and T scales) for steel
95.99 ISO/TC 164/SC 3
ISO 1079:1989 [Withdrawn]
Metallic materials -- Hardness test -- Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T)
95.99 ISO/TC 164/SC 3
ISO/R 1079:1969 [Withdrawn]
Verification of Rockwell superficial N and T scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 1099:1975 [Withdrawn]
Metals -- Axial load fatigue testing
95.99 ISO/TC 164/SC 5
ISO 1099:2006
Metallic materials -- Fatigue testing -- Axial force-controlled method
90.92 ISO/TC 164/SC 5
ISO/FDIS 1099 [Under development]
Metallic materials -- Fatigue testing -- Axial force-controlled method
50.20 ISO/TC 164/SC 5
ISO 1143:1975 [Withdrawn]
Metals -- Rotating bar bending fatigue testing
95.99 ISO/TC 164/SC 5
ISO 1143:2010
Metallic materials -- Rotating bar bending fatigue testing
90.92 ISO/TC 164/SC 5
ISO/NP 1143 [Under development]
Metallic materials -- Rotating bar bending fatigue testing
10.99 ISO/TC 164/SC 5
ISO 1352:1977 [Withdrawn]
Steel -- Torsional stress fatigue testing
95.99 ISO/TC 164/SC 5
ISO 1352:2011
Metallic materials -- Torque-controlled fatigue testing
90.60 ISO/TC 164/SC 5
ISO/R 1355:1970 [Withdrawn]
Calibration of standardized blocks to be used for Rockwell superficial N and T scale hardness testing machines
95.99 ISO/TC 164/SC 3
ISO/R 1555:1971 [Withdrawn]
Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) -- Tensile test
95.99 ISO/TC 164/SC 1
ISO/R 1556:1971 [Withdrawn]
Copper and copper alloy tubes of circular section -- Flattening test
95.99 ISO/TC 164/SC 2
ISO/R 2101:1971 [Withdrawn]
Aluminium and aluminium alloys -- Shear test for rivet wire and rivets
95.99 ISO/TC 164/SC 2
ISO 2142:1981 [Withdrawn]
Wrought aluminium, magnesium and their alloys -- Selection of specimens and test pieces for mechanical testing
95.99 ISO/TC 79/SC 6
ISO 2566-1:1973 [Withdrawn]
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels
95.99 ISO/TC 17
ISO 2566-1:1984
Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels
90.93 ISO/TC 17/SC 20
ISO 2566-2:1984
Steel -- Conversion of elongation values -- Part 2: Austenitic steels
90.93 ISO/TC 17/SC 20
ISO 2573:1977 [Withdrawn]
Tensile testing systems -- Determination of K-value
95.99 ISO/TC 164/SC 1
ISO 2625:1973 [Withdrawn]
Copper and copper alloys -- Reverse bend testing of wire
95.99 ISO/TC 164/SC 2
ISO 2627:1973 [Withdrawn]
Copper and copper alloys -- Simple torsion testing of wire
95.99 ISO/TC 164/SC 2
ISO 2712:1973 [Withdrawn]
Copper and copper alloys -- Rockwell superficial hardness test (N and T scales)
95.99 ISO/TC 164/SC 3
ISO 2713:1973 [Withdrawn]
Copper and copper alloys -- Rockwell hardness test (B, F and G scales)
95.99 ISO/TC 164/SC 3
ISO 2739:1973 [Withdrawn]
Sintered metal bushes -- Determination of radial crushing strength
95.99 ISO/TC 119/SC 3
ISO 2739:2006 [Withdrawn]
Sintered metal bushes -- Determination of radial crushing strength
95.99 ISO/TC 119/SC 3
ISO 2739:2012
Sintered metal bushings -- Determination of radial crushing strength
60.60 ISO/TC 119/SC 3
ISO 2740:1973 [Withdrawn]
Sintered metal materials (excluding hardmetal) -- Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:1986 [Withdrawn]
Sintered metal materials (excluding hardmetal) -- Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:1999 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:2007 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Tensile test pieces
95.99 ISO/TC 119/SC 3
ISO 2740:2009
Sintered metal materials, excluding hardmetals -- Tensile test pieces
90.93 ISO/TC 119/SC 3
ISO 3312:1975 [Withdrawn]
Sintered metal materials and hardmetals -- Determination of Young's modulus
95.99 ISO/TC 119
ISO 3312:1987
Sintered metal materials and hardmetals -- Determination of Young modulus
90.93 ISO/TC 119/SC 3
ISO 3325:1975 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength
95.99 ISO/TC 119/SC 3
ISO 3325:1996
Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength
90.20 ISO/TC 119/SC 3
ISO 3325:1996/Amd 1:2001
Precision statement
60.60 ISO/TC 119/SC 3
ISO 3327:1982 [Withdrawn]
Hardmetals -- Determination of transverse rupture strength
95.99 ISO/TC 119/SC 4
ISO 3327:2009
Hardmetals -- Determination of transverse rupture strength
90.93 ISO/TC 119/SC 4
ISO 3738:1976 [Withdrawn]
Hardmetals -- Rockwell hardness test (Scale A)
95.99 ISO/TC 119/SC 4
ISO 3738-1:1982
Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method
90.93 ISO/TC 119/SC 4
ISO 3738-2:1988
Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks
90.93 ISO/TC 119/SC 4
ISO 3785:1976 [Withdrawn]
Steel -- Designation of test piece axes
95.99 ISO/TC 164/SC 4
ISO 3785:2006
Metallic materials -- Designation of test specimen axes in relation to product texture
90.93 ISO/TC 164/SC 4
ISO 3878:1983
Hardmetals -- Vickers hardness test
90.93 ISO/TC 119/SC 4
ISO 3928:1977 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Fatigue test pieces
95.99 ISO/TC 119/SC 3
ISO 3928:1999 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Fatigue test pieces
95.99 ISO/TC 119/SC 3
ISO 3928:2016
Sintered metal materials, excluding hardmetals -- Fatigue test pieces
60.60 ISO/TC 119/SC 3
ISO 3995:1977 [Withdrawn]
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts
95.99 ISO/TC 119
ISO 3995:1985
Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts
90.93 ISO/TC 119/SC 2
ISO 4498:2005 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness
95.99 ISO/TC 119/SC 3
ISO 4498:2010
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness
90.93 ISO/TC 119/SC 3
ISO 4498-1:1978 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 1: Materials of essentially uniform section hardness
95.99 ISO/TC 119/SC 3
ISO 4498-1:1990 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 1: Materials of essentially uniform section hardness
95.99 ISO/TC 119/SC 3
ISO 4498-2:1981 [Withdrawn]
Sintered metal materials, excluding hardmetals -- Determination of apparent hardness -- Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
95.99 ISO/TC 119/SC 3
ISO 4506:1979
Hardmetals -- Compression test
90.92 ISO/TC 119/SC 4
ISO/CD 4506 [Under development]
Hardmetals -- Compression test
30.99 ISO/TC 119/SC 4
ISO 4507:1978 [Withdrawn]
Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of effective case depth by the Vickers microhardness testing method
95.99 ISO/TC 119/SC 3
ISO 4507:2000
Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth by a micro-hardness test
90.20 ISO/TC 119/SC 3
ISO 4545:1993 [Withdrawn]
Metallic materials -- Hardness test -- Knoop test
95.99 ISO/TC 164/SC 3
ISO 4545-1:2005
Metallic materials -- Knoop hardness test -- Part 1: Test method
90.92 ISO/TC 164/SC 3
ISO/DIS 4545-1 [Under development]
Metallic materials -- Knoop hardness test -- Part 1: Test method
40.60 ISO/TC 164/SC 3
ISO 4545-2:2005
Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
ISO/DIS 4545-2 [Under development]
Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines
40.60 ISO/TC 164/SC 3
ISO 4545-3:2005
Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
ISO/DIS 4545-3 [Under development]
Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks
40.60 ISO/TC 164/SC 3
ISO 4545-4:2005
Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values
90.92 ISO/TC 164/SC 3
ISO/DIS 4545-4 [Under development]
Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values
40.60 ISO/TC 164/SC 3
ISO 4546:1993 [Withdrawn]
Metallic materials -- Hardness test -- Verification of Knoop hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 4547:1993 [Withdrawn]
Metallic materials -- Hardness test -- Calibration of standardized blocks to be used for Knoop hardness testing machines
95.99 ISO/TC 164/SC 3
ISO 4739:1985
Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing
90.93 ISO/TC 26
ISO 4964:1984 [Withdrawn]
Steel -- Hardness conversions
95.99 ISO/TC 17/SC 20
ISO 4965:1979 [Withdrawn]
Axial load fatigue testing machines -- Dynamic force calibration -- Strain gauge technique
95.99 ISO/TC 164/SC 5
ISO 4965-1:2012
Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 1: Testing systems
60.60 ISO/TC 164/SC 5
ISO 4965-2:2012
Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 2: Dynamic calibration device (DCD) instrumentation
60.60 ISO/TC 164/SC 5
ISO 5754:1978
Sintered metal materials, excluding hardmetals -- Unnotched impact test piece
90.92 ISO/TC 119/SC 3
ISO/DIS 5754 [Under development]
Sintered metal materials, excluding hardmetals -- Unnotched impact test piece
40.99 ISO/TC 119/SC 3
ISO 6506:1981 [Withdrawn]
Metallic materials -- Hardness test -- Brinell test
95.99 ISO/TC 164/SC 3
ISO 6506-1:1999 [Withdrawn]
Metallic materials -- Brinell hardness test -- Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6506-1:2005 [Withdrawn]
Metallic materials -- Brinell hardness test -- Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6506-1:2014
Metallic materials -- Brinell hardness test -- Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 6506-2:1999 [Withdrawn]
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 6506-2:2005 [Withdrawn]
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 6506-2:2014
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
ISO/DIS 6506-2 [Under development]
Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines
40.60 ISO/TC 164/SC 3
ISO 6506-3:1999 [Withdrawn]
Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 6506-3:2005 [Withdrawn]
Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 6506-3:2014
Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
ISO 6506-4:2005 [Withdrawn]
Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values
95.99 ISO/TC 164/SC 3
ISO 6506-4:2014
Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values
60.60 ISO/TC 164/SC 3
ISO 6507-1:1982 [Withdrawn]
Metallic materials -- Hardness test -- Vickers test -- Part 1: HV 5 to HV 100
95.99 ISO/TC 164/SC 3
ISO 6507-1:1997 [Withdrawn]
Metallic materials -- Vickers hardness test -- Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6507-1:2005
Metallic materials -- Vickers hardness test -- Part 1: Test method
90.92 ISO/TC 164/SC 3
ISO/DIS 6507-1 [Under development]
Metallic materials -- Vickers hardness test -- Part 1: Test method
40.99 ISO/TC 164/SC 3
ISO 6507-2:1983 [Withdrawn]
Metallic materials -- Hardness test -- Vickers test -- Part 2: HV 0,2 to less than HV 5
95.99 ISO/TC 164/SC 3
ISO 6507-2:1997 [Withdrawn]
Metallic materials -- Vickers hardness test -- Part 2: Verification of testing machines
95.99 ISO/TC 164/SC 3
ISO 6507-2:2005
Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines
90.92 ISO/TC 164/SC 3
ISO/DIS 6507-2 [Under development]
Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines
40.99 ISO/TC 164/SC 3
ISO 6507-3:1989 [Withdrawn]
Metallic materials -- Hardness test -- Vickers test -- Part 3: Less than HV 0,2
95.99 ISO/TC 164/SC 3
ISO 6507-3:1997 [Withdrawn]
Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 6507-3:2005
Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks
90.92 ISO/TC 164/SC 3
ISO/DIS 6507-3 [Under development]
Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks
40.99 ISO/TC 164/SC 3
ISO 6507-4:2005
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values
90.92 ISO/TC 164/SC 3
ISO/DIS 6507-4 [Under development]
Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values
40.99 ISO/TC 164/SC 3
ISO 6508:1986 [Withdrawn]
Metallic materials -- Hardness test -- Rockwell test (scales A - B - C - D - E - F - G - H - K)
95.99 ISO/TC 164/SC 3
ISO 6508-1:1999 [Withdrawn]
Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-1:2005 [Withdrawn]
Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-1:2015 [Withdrawn]
Metallic materials -- Rockwell hardness test -- Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 6508-1:2016
Metallic materials -- Rockwell hardness test -- Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 6508-2:1999 [Withdrawn]
Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-2:2005 [Withdrawn]
Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-2:2015
Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines and indenters
60.60 ISO/TC 164/SC 3
ISO 6508-3:1999 [Withdrawn]
Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-3:2005 [Withdrawn]
Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
95.99 ISO/TC 164/SC 3
ISO 6508-3:2015
Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
ISO 6892:1984 [Withdrawn]
Metallic materials -- Tensile testing
95.99 ISO/TC 164/SC 1
ISO 6892:1998 [Withdrawn]
Metallic materials -- Tensile testing at ambient temperature
95.99 ISO/TC 164/SC 1
ISO 6892-1:2009 [Withdrawn]
Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature
95.99 ISO/TC 164/SC 1
ISO 6892-1:2016
Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature
60.60 ISO/TC 164/SC 1
ISO 6892-2:2011
Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature
90.92 ISO/TC 164/SC 1
ISO/DIS 6892-2 [Under development]
Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature
40.99 ISO/TC 164/SC 1
ISO 6892-3:2015
Metallic materials -- Tensile testing -- Part 3: Method of test at low temperature
60.60 ISO/TC 164/SC 1
ISO 6892-4:2015
Metallic materials -- Tensile testing -- Part 4: Method of test in liquid helium
60.60 ISO/TC 164/SC 1
ISO 7438:1985 [Withdrawn]
Metallic materials -- Bend test
95.99 ISO/TC 164/SC 2
ISO 7438:2005 [Withdrawn]
Metallic materials -- Bend test
95.99 ISO/TC 164/SC 2
ISO 7438:2016
Metallic materials -- Bend test
90.92 ISO/TC 164/SC 2
ISO/NP 7438 [Under development]
Metallic materials -- Bend test
10.99 ISO/TC 164/SC 2
ISO 7500-1:1986 [Withdrawn]
Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tensile testing machines
95.99 ISO/TC 164/SC 1
ISO 7500-1:1999 [Withdrawn]
Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system
95.99 ISO/TC 164/SC 1
ISO 7500-1:2004 [Withdrawn]
Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system
95.99 ISO/TC 164/SC 1
95.99 ISO/TC 164/SC 1
ISO 7500-1:2015
Metallic materials -- Calibration and verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Calibration and verification of the force-measuring system
90.92 ISO/TC 164/SC 1
ISO/DIS 7500-1 [Under development]
Metallic materials -- Calibration and verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Calibration and verification of the force-measuring system
40.99 ISO/TC 164/SC 1
ISO 7500-2:1996 [Withdrawn]
Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied load
95.99 ISO/TC 164/SC 1
ISO 7500-2:2006
Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force
90.93 ISO/TC 164/SC 1
ISO 7799:1985
Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test
90.93 ISO/TC 164/SC 2
ISO 7800:1984 [Withdrawn]
Metallic materials -- Wire -- Simple torsion test
95.99 ISO/TC 164/SC 2
ISO 7800:2003 [Withdrawn]
Metallic materials -- Wire -- Simple torsion test
95.99 ISO/TC 164/SC 2
ISO 7800:2012
Metallic materials -- Wire -- Simple torsion test
90.20 ISO/TC 164/SC 2
ISO 7801:1984
Metallic materials -- Wire -- Reverse bend test
90.93 ISO/TC 164/SC 2
ISO 7802:1983 [Withdrawn]
Metallic materials -- Wire -- Wrapping test
95.99 ISO/TC 164/SC 2
ISO 7802:2013
Metallic materials -- Wire -- Wrapping test
60.60 ISO/TC 164/SC 2
ISO 8490:1986 [Withdrawn]
Metallic materials -- Sheet and strip -- Modified Erichsen cupping test
95.99 ISO/TC 164/SC 2
ISO 8491:1986 [Withdrawn]
Metallic materials -- Tube (in full section) -- Bend test
95.99 ISO/TC 164/SC 2
ISO 8491:1998
Metallic materials -- Tube (in full section) -- Bend test
90.93 ISO/TC 164/SC 2
ISO 8492:1986 [Withdrawn]
Metallic materials -- Tube -- Flattening test
95.99 ISO/TC 164/SC 2
ISO 8492:1998 [Withdrawn]
Metallic materials -- Tube -- Flattening test
95.99 ISO/TC 164/SC 2
ISO 8492:2013
Metallic materials -- Tube -- Flattening test
60.60 ISO/TC 164/SC 2
ISO 8493:1986 [Withdrawn]
Metallic materials -- Tube -- Drift-expanding test
95.99 ISO/TC 164/SC 2
ISO 8493:1998
Metallic materials -- Tube -- Drift-expanding test
90.93 ISO/TC 164/SC 2
ISO 8494:1986 [Withdrawn]
Metallic materials -- Tube -- Flanging test
95.99 ISO/TC 164/SC 2
ISO 8494:1998 [Withdrawn]
Metallic materials -- Tube -- Flanging test
95.99 ISO/TC 164/SC 2
ISO 8494:2013
Metallic materials -- Tube -- Flanging test
60.60 ISO/TC 164/SC 2
ISO 8495:1986 [Withdrawn]
Metallic materials -- Tube -- Ring-expanding test
95.99 ISO/TC 164/SC 2
ISO 8495:1998 [Withdrawn]
Metallic materials -- Tube -- Ring-expanding test
95.99 ISO/TC 164/SC 2
ISO 8495:2013
Metallic materials -- Tube -- Ring-expanding test
60.60 ISO/TC 164/SC 2
ISO 8496:1986 [Withdrawn]
Metallic materials -- Tube -- Ring tensile test
95.99 ISO/TC 164/SC 2
ISO 8496:1998 [Withdrawn]
Metallic materials -- Tube -- Ring tensile test
95.99 ISO/TC 164/SC 2
ISO 8496:2013
Metallic materials -- Tube -- Ring tensile test
60.60 ISO/TC 164/SC 2
ISO 9513:1989 [Withdrawn]
Metallic materials -- Verification of extensometers used in uniaxial testing
95.99 ISO/TC 164/SC 1
ISO 9513:1999 [Withdrawn]
Metallic materials -- Calibration of extensometers used in uniaxial testing
95.99 ISO/TC 164/SC 1
95.99 ISO/TC 164/SC 1
ISO 9513:2012
Metallic materials -- Calibration of extensometer systems used in uniaxial testing
90.20 ISO/TC 164/SC 1
60.60 ISO/TC 164/SC 1
ISO 9649:1990 [Withdrawn]
Metallic materials -- Wire -- Reverse torsion test
95.99 ISO/TC 164/SC 2
ISO 9649:2016
Metallic materials -- Wire -- Reverse torsion test
60.60 ISO/TC 164/SC 2
ISO/TR 10108:1989 [Withdrawn]
Steel -- Conversion of hardness values to tensile strength values
95.99 ISO/TC 17/SC 20
ISO/WD TS 10108 [Deleted]
Steel -- Conversion of hardness values to tensile strength values
20.98 ISO/TC 17/SC 20
ISO 10113:1991 [Withdrawn]
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio
95.99 ISO/TC 164/SC 2
ISO 10113:2006
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio
90.92 ISO/TC 164/SC 2
ISO/DIS 10113 [Under development]
Metallic materials -- Sheet and strip -- Determination of plastic strain ratio
40.00 ISO/TC 164/SC 2
ISO 10250:1994 [Withdrawn]
Metallic materials -- Hardness testing -- Tables of Knoop hardness values for use in tests made on flat surfaces
95.99 ISO/TC 164/SC 3
ISO 10275:1993 [Withdrawn]
Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent
95.99 ISO/TC 164/SC 2
ISO 10275:2007
Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent
90.93 ISO/TC 164/SC 2
ISO 11531:1994 [Withdrawn]
Metallic materials -- Earing test
95.99 ISO/TC 164/SC 2
ISO 11531:2015
Metallic materials -- Sheet and strip -- Earing test
60.60 ISO/TC 164/SC 2
ISO 12004:1997 [Withdrawn]
Metallic materials -- Guidelines for the determination of forming-limit diagrams
95.99 ISO/TC 164/SC 2
ISO 12004-1:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop
90.93 ISO/TC 164/SC 2
ISO 12004-2:2008
Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory
90.93 ISO/TC 164/SC 2
ISO 12106 [Under development]
Metallic materials -- Fatigue testing -- Axial-strain-controlled method
60.00 ISO/TC 164/SC 5
ISO 12106:2003
Metallic materials -- Fatigue testing -- Axial-strain-controlled method
90.92 ISO/TC 164/SC 5
ISO 12107:2003 [Withdrawn]
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data
95.99 ISO/TC 164/SC 5
ISO 12107:2012
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data
60.60 ISO/TC 164/SC 5
ISO/DIS 12107 [Under development]
Metallic materials -- Fatigue testing -- Statistical planning and analysis of data
40.00 ISO/TC 164/SC 5
ISO 12108:2002 [Withdrawn]
Metallic materials -- Fatigue testing -- Fatigue crack growth method
95.99 ISO/TC 164/SC 5
ISO 12108:2012
Metallic materials -- Fatigue testing -- Fatigue crack growth method
60.60 ISO/TC 164/SC 5
ISO 12110-1:2013
Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 1: General principles, test method and reporting requirements
60.60 ISO/TC 164/SC 5
ISO 12110-2:2013
Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 2: Cycle counting and related data reduction methods
60.60 ISO/TC 164/SC 5
ISO 12111:2011
Metallic materials -- Fatigue testing -- Strain-controlled thermomechanical fatigue testing method
90.60 ISO/TC 164/SC 5
ISO/DTR 12112 [Under development]
Metallic materials -- Fatigue testing -- Multi-axis fatigue testing method
30.20 ISO/TC 164/SC 5
ISO 12135:2002 [Withdrawn]
Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness
95.99 ISO/TC 164/SC 4
95.99 ISO/TC 164/SC 4
ISO 12135:2016
Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness
60.60 ISO/TC 164/SC 4
ISO/TR 12735-1:1996 [Withdrawn]
Mechanical testing of metals -- Symbols used with their definitions -- Part 1: Symbols and definitions in published standards
95.99 ISO/TC 164
ISO/TR 12735-2:1996 [Withdrawn]
Mechanical testing of metals -- Symbols used with their definitions -- Part 2: Recommendations for the development of symbols and definitions
95.99 ISO/TC 164
ISO 12737:1996 [Withdrawn]
Metallic materials -- Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
ISO 12737:2005 [Withdrawn]
Metallic materials -- Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
ISO 12737:2010 [Withdrawn]
Metallic materials -- Determination of plane-strain fracture toughness
95.99 ISO/TC 164/SC 4
ISO 13314:2011
Mechanical testing of metals -- Ductility testing -- Compression test for porous and cellular metals
90.93 ISO/TC 164/SC 2
ISO 14317:2006 [Withdrawn]
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength
95.99 ISO/TC 119/SC 3
ISO 14317:2015
Sintered metal materials excluding hardmetals -- Determination of compressive yield strength
60.60 ISO/TC 119/SC 3
ISO 14556:2000 [Withdrawn]
Steel -- Charpy V-notch pendulum impact test -- Instrumented test method
95.99 ISO/TC 164/SC 4
ISO 14556:2000/Amd 1:2006 [Withdrawn]
Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
95.99 ISO/TC 164/SC 4
ISO 14556:2015
Metallic materials -- Charpy V-notch pendulum impact test -- Instrumented test method
60.60 ISO/TC 164/SC 4
ISO/TR 14577:1995 [Withdrawn]
Metallic materials -- Hardness test -- Universal test
95.99 ISO/TC 164/SC 3
ISO 14577-1:2002 [Withdrawn]
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method
95.99 ISO/TC 164/SC 3
ISO 14577-1:2015
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 14577-2:2002 [Withdrawn]
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines
95.99 ISO/TC 164/SC 3
ISO 14577-2:2015
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines
60.60 ISO/TC 164/SC 3
ISO 14577-3:2002 [Withdrawn]
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
95.99 ISO/TC 164/SC 3
ISO 14577-3:2015
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks
60.60 ISO/TC 164/SC 3
ISO 14577-4:2007 [Withdrawn]
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
95.99 ISO/TC 164/SC 3
ISO 14577-4:2016
Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings
60.60 ISO/TC 164/SC 3
ISO/TR 14936:1998 [Withdrawn]
Metallic materials -- Strain analysis report
95.99 ISO/TC 164/SC 2
ISO 15363:2000
Metallic materials -- Tube ring hydraulic pressure test
90.92 ISO/TC 164/SC 2
ISO/FDIS 15363 [Under development]
Metallic materials -- Tube ring hydraulic pressure test
50.00 ISO/TC 164/SC 2
ISO/DIS 15461 [Under development]
Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests
40.20 ISO/TC 17/SC 10
ISO/TR 15461:1997 [Withdrawn]
Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests
95.99 ISO/TC 17/SC 10
ISO 15579:2000 [Withdrawn]
Metallic materials -- Tensile testing at low temperature
95.99 ISO/TC 164/SC 1
ISO 16630:2009
Metallic materials -- Sheet and strip -- Hole expanding test
90.92 ISO/TC 164/SC 2
ISO/FDIS 16630 [Under development]
Metallic materials -- Sheet and strip -- Hole expanding test
50.00 ISO/TC 164/SC 2
ISO/TS 16630:2003 [Withdrawn]
Metallic materials -- Method of hole expanding test
95.99 ISO/TC 164/SC 2
ISO 16808:2014
Metallic materials -- Sheet and strip -- Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
60.60 ISO/TC 164/SC 2
ISO 16842:2014
Metallic materials -- Sheet and strip -- Biaxial tensile testing method using a cruciform test piece
60.60 ISO/TC 164/SC 2
ISO 16859-1:2015
Metallic materials -- Leeb hardness test -- Part 1: Test method
60.60 ISO/TC 164/SC 3
ISO 16859-2:2015
Metallic materials -- Leeb hardness test -- Part 2: Verification and calibration of the testing devices
60.60 ISO/TC 164/SC 3
ISO 16859-3:2015
Metallic materials -- Leeb hardness test -- Part 3: Calibration of reference test blocks
60.60 ISO/TC 164/SC 3
ISO 17340:2014
Metallic materials -- Ductility testing -- High speed compression test for porous and cellular metals
60.60 ISO/TC 164/SC 2
ISO 18265:2003 [Withdrawn]
Metallic materials -- Conversion of hardness values
95.99 ISO/TC 164/SC 3
ISO 18265:2013
Metallic materials -- Conversion of hardness values
60.60 ISO/TC 164/SC 3
ISO 18338:2015
Metallic materials -- Torsion test at ambient temperature
60.60 ISO/TC 164/SC 2
ISO 19819:2004 [Withdrawn]
Metallic materials -- Tensile testing in liquid helium
95.99 ISO/TC 164/SC 1
ISO 20032:2007 [Withdrawn]
Method for evaluation of tensile properties of metallic superplastic materials
95.99 ISO/TC 164/SC 2
ISO 20032:2013
Method for evaluation of tensile properties of metallic superplastic materials
60.60 ISO/TC 164/SC 2
ISO/CD 20064 [Under development]
Test method for brittle crack arrst toughness, Kca
30.99 ISO/TC 164/SC 4
ISO 20482:2003 [Withdrawn]
Metallic materials -- Sheet and strip -- Erichsen cupping test
95.99 ISO/TC 164/SC 2
ISO 20482:2013
Metallic materials -- Sheet and strip -- Erichsen cupping test
60.60 ISO/TC 164/SC 2
ISO 22394:2010 [Withdrawn]
Hardmetals -- Knoop hardness test
95.99 ISO/TC 119/SC 4
ISO 22889:2007 [Withdrawn]
Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint
95.99 ISO/TC 164/SC 4
ISO 22889:2013
Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint
60.60 ISO/TC 164/SC 4
ISO 23718:2007
Metallic materials -- Mechanical testing -- Vocabulary
90.60 ISO/TC 164
ISO 23788:2012
Metallic materials -- Verification of the alignment of fatigue testing machines
60.60 ISO/TC 164/SC 5
ISO 24213:2008
Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending
90.92 ISO/TC 164/SC 2
ISO/FDIS 24213 [Under development]
Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending
50.00 ISO/TC 164/SC 2
ISO/TR 25679:2005
Mechanical testing of metals -- Symbols and definitions in published standards
90.93 ISO/TC 164
ISO 26203-1:2010
Metallic materials -- Tensile testing at high strain rates -- Part 1: Elastic-bar-type systems
90.92 ISO/TC 164/SC 1
ISO/DIS 26203-1 [Under development]
Metallic materials -- Tensile testing at high strain rates -- Part 1: Elastic-bar-type systems
40.99 ISO/TC 164/SC 1
ISO 26203-2:2011
Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems
90.60 ISO/TC 164/SC 1
ISO 26843:2015
Metallic materials -- Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
60.60 ISO/TC 164/SC 4
ISO 27306:2009 [Withdrawn]
Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
95.99 ISO/TC 164/SC 4
ISO 27306:2016
Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
60.60 ISO/TC 164/SC 4
ISO 28079:2009
Hardmetals -- Palmqvist toughness test
90.93 ISO/TC 119/SC 4
ISO 28080:2011
Hardmetals -- Abrasion tests for hardmetals
90.92 ISO/TC 119/SC 4
ISO/NP 28080 [Under development]
Hardmetals -- Abrasion tests for hardmetals
10.99 ISO/TC 119/SC 4
ISO/TR 29381:2008
Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties
90.93 ISO/TC 164/SC 3

No matching records found