• Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 6752:1984
Round punches with 60 degrees conical head and straight shank
95.99 ISO/TC 29/SC 8
ISO 6752:2008
Tools for pressing -- Round punches with 60 degrees conical head and straight shank
90.93 ISO/TC 29/SC 8
ISO 6753:1982
Machined plates for press tools, moulds, jigs and fixtures -- Nominal dimensions
95.99 ISO/TC 29/SC 8
ISO 6753-1:1994
Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools, jigs and fixtures
95.99 ISO/TC 29/SC 8
ISO 6753-1:2005
Tools for pressing and moulding -- Machined plates -- Part 1: Machined plates for press tools
90.93 ISO/TC 29/SC 8
ISO 6898:1984
Open front mechanical power presses -- Capacity ratings and dimensions
90.93 ISO/TC 39
ISO 6899:1984
Acceptance conditions of open front mechanical power presses -- Testing of the accuracy
90.93 ISO/TC 39
ISO 8020:1986
Punches with cylindrical head and reduced shank
95.99 ISO/TC 29/SC 8
ISO 8020:1992
Tools for pressing -- Punches with cylindrical head and reduced shank
95.99 ISO/TC 29/SC 8
ISO 8020:2002
Tools for pressing -- Punches with cylindrical head and straight or reduced shank
90.93 ISO/TC 29/SC 8
ISO 8021:1986
Round punches with cylindrical head and straight shank
95.99 ISO/TC 29/SC 8
ISO 8540:1993
Open front mechanical power presses -- Vocabulary
90.93 ISO/TC 39
ISO 8695:1987
Tools for pressing -- Punches -- Nomenclature and terminology
95.99 ISO/TC 29/SC 8
ISO 8695:2010
Tools for pressing -- Punches -- Nomenclature and terminology
90.93 ISO/TC 29/SC 8
ISO 8977:1987
Tools for pressing -- Round matrixes
95.99 ISO/TC 29/SC 8
ISO 8977:2003
Tools for pressing -- Matrixes
90.93 ISO/TC 29/SC 8
ISO 8978:1987
Tools for pressing -- Guides for round punches
95.99 ISO/TC 29/SC 8
ISO 9181:1990
Tools for pressing -- Round punches with 60 degrees conical head and reduced shank
95.99 ISO/TC 29/SC 8
ISO 9181:2007
Tools for pressing -- Round punches with 60 degrees conical head and reduced shank
90.93 ISO/TC 29/SC 8
ISO 9182-1:1992
Tools for pressing -- Guide pillars -- Part 1: Types
95.99 ISO/TC 29/SC 8
ISO 9182-1:2013
Tools for pressing -- Guide pillars -- Part 1: Types
90.93 ISO/TC 29/SC 8
ISO 9182-2:1992
Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
95.99 ISO/TC 29/SC 8
ISO 9182-2:2013
Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars
90.93 ISO/TC 29/SC 8
ISO 9182-3:1992
Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
95.99 ISO/TC 29/SC 8
ISO 9182-3:2013
Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
90.92 ISO/TC 29/SC 8
ISO/CD 9182-3
Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
30.99 ISO/TC 29/SC 8
ISO 9182-4:1992
Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
95.99 ISO/TC 29/SC 8
ISO 9182-4:2013
Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
90.92 ISO/TC 29/SC 8
ISO/CD 9182-4
Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
30.99 ISO/TC 29/SC 8
ISO 9182-5:1992
Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
95.99 ISO/TC 29/SC 8
ISO 9182-5:2013
Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
90.92 ISO/TC 29/SC 8
ISO/CD 9182-5
Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
30.99 ISO/TC 29/SC 8
ISO 9183-1:1990
Tools for pressing -- Wear plates for press dies -- Part 1: Type A
95.99 ISO/TC 29/SC 8
ISO 9183-1:2008
Tools for pressing -- Wear plates for press dies -- Part 1: Type A
90.93 ISO/TC 29/SC 8
ISO 9183-2:1993
Tools for pressing -- Wear plates for press dies -- Part 2: Type B
95.99 ISO/TC 29/SC 8
ISO 9183-2:2011
Tools for pressing -- Wear plates for press dies -- Part 2: Type B
90.93 ISO/TC 29/SC 8
ISO 9188:1993
Machine tools -- Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force -- Characteristics and dimensions
90.93 ISO/TC 39
ISO 9189:1993
Machine tools -- Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force -- Characteristics and dimensions
90.93 ISO/TC 39
ISO 9448-1:1991
Tools for pressing -- Guide bushes -- Part 1: Forms
95.99 ISO/TC 29/SC 8
ISO 9448-1:2013
Tools for pressing -- Guide bushes -- Part 1: Forms
90.93 ISO/TC 29/SC 8
ISO 9448-2:1991
Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
95.99 ISO/TC 29/SC 8
ISO 9448-2:2013
Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1
90.93 ISO/TC 29/SC 8
ISO 9448-3:1991
Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1
95.99 ISO/TC 29/SC 8
ISO 9448-3:2013
Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1
90.93 ISO/TC 29/SC 8
ISO 9448-4:1991
Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
95.99 ISO/TC 29/SC 8
ISO 9448-4:2013
Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
90.93 ISO/TC 29/SC 8
ISO 9448-5:1991
Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
95.99 ISO/TC 29/SC 8
ISO 9448-5:2013
Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
90.93 ISO/TC 29/SC 8
ISO 9448-6:1991
Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
95.99 ISO/TC 29/SC 8
ISO 9448-6:2013
Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
90.93 ISO/TC 29/SC 8
ISO 9448-7:1991
Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1
95.99 ISO/TC 29/SC 8
ISO 9448-7:2013
Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1
90.93 ISO/TC 29/SC 8
ISO 9448-8:1991
Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
95.99 ISO/TC 29/SC 8
ISO 9448-8:2013
Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
90.93 ISO/TC 29/SC 8
ISO 9448-9:1992
Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
95.99 ISO/TC 29/SC 8
ISO 9448-9:2013
Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
90.93 ISO/TC 29/SC 8
ISO 9448-10:1992
Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2
95.99 ISO/TC 29/SC 8
ISO 9448-10:2013
Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2
90.93 ISO/TC 29/SC 8
ISO 9448-11:1992
Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2
95.99 ISO/TC 29/SC 8
ISO 9448-11:2013
Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2
90.93 ISO/TC 29/SC 8
ISO 10069-1:1991
Tools for pressing -- Elastomer pressure springs -- Part 1: General specification
95.99 ISO/TC 29/SC 8
ISO 10069-1:2008
Tools for pressing -- Elastomer pressure springs -- Part 1: General specification
90.93 ISO/TC 29/SC 8
ISO 10069-2:1991
Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories
95.99 ISO/TC 29/SC 8
ISO 10069-2:2008
Tools for pressing -- Elastomer pressure springs -- Part 2: Specification of accessories
90.93 ISO/TC 29/SC 8
ISO 10071:1991
Tools for pressing -- Ball-lock punches
95.99 ISO/TC 29/SC 8
ISO 10071-1:2001
Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty
95.99 ISO/TC 29/SC 8
ISO 10071-1:2008
Tools for pressing -- Ball-lock punches -- Part 1: Ball-lock punches for light duty
90.93 ISO/TC 29/SC 8
ISO 10071-2:2005
Tools for pressing -- Ball-lock punches -- Part 2: Ball-lock punches for heavy duty
90.93 ISO/TC 29/SC 8
ISO 10242-1:1991
Tools for pressing -- Punch holder shanks -- Part 1: Types A and B
95.99 ISO/TC 29/SC 8
ISO 10242-1:1998
Tools for pressing -- Punch holder shanks -- Part 1: Type A
95.99 ISO/TC 29/SC 8
ISO 10242-1:2011
Tools for pressing -- Punch holder shanks -- Part 1: Type A
90.93 ISO/TC 29/SC 8
ISO 10242-2:1991
Tools for pressing -- Punch holder shanks -- Part 2: Type C
95.99 ISO/TC 29/SC 8
ISO 10242-2:2008
Tools for pressing -- Punch holder shanks -- Part 2: Type C
90.93 ISO/TC 29/SC 8
ISO 10242-3:1991
Tools for pressing -- Punch holder shanks -- Part 3: Type D
95.99 ISO/TC 29/SC 8
ISO 10242-3:2008
Tools for pressing -- Punch holder shanks -- Part 3: Type D
90.93 ISO/TC 29/SC 8
ISO 10243:1991
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
95.99 ISO/TC 29/SC 8
ISO 10243:2010
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
95.99 ISO/TC 29/SC 8
95.99 ISO/TC 29/SC 8
ISO 10243:2019
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
60.60 ISO/TC 29/SC 8
ISO 11415:1997
Tools for pressing -- Die sets
90.93 ISO/TC 29/SC 8
ISO 11900-1:1994
Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B, rectangular and square for light duty
95.99 ISO/TC 29/SC 8
ISO 11900-1:2007
Tools for pressing -- Ball-lock punch retainers -- Part 1: Types A and B, rectangular and square for light duty
90.93 ISO/TC 29/SC 8
ISO 11900-2:2001
Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D, reduced for light duty
95.99 ISO/TC 29/SC 8
ISO 11900-2:2008
Tools for pressing -- Ball-lock punch retainers -- Part 2: Types C and D, reduced for light duty
90.93 ISO/TC 29/SC 8
ISO 11900-3:2004
Tools for pressing -- Ball-lock punch retainers -- Part 3: Type E, reduced for heavy duty
90.93 ISO/TC 29/SC 8
ISO 11901-1:1995
Tools for pressing -- Gas springs -- Part 1: General specifications
95.99 ISO/TC 29/SC 8
ISO 11901-1:2003
Tools for pressing -- Gas springs -- Part 1: General specifications
90.93 ISO/TC 29/SC 8
ISO 11901-2:1995
Tools for pressing -- Gas springs -- Part 2: Specification of accessories
95.99 ISO/TC 29/SC 8
ISO 11901-2:2004
Tools for pressing -- Gas springs -- Part 2: Specification of accessories
95.99 ISO/TC 29/SC 8
ISO 11901-2:2018
Tools for pressing -- Gas springs -- Part 2: Specification of accessories
60.60 ISO/TC 29/SC 8
ISO 11901-3:2014
Tools for pressing -- Gas springs -- Part 3: Gas spring with increased spring force and compact built height
90.93 ISO/TC 29/SC 8
ISO 11901-4:2014
Tools for pressing -- Gas springs -- Part 4: Gas springs with increased spring force and same built height
90.93 ISO/TC 29/SC 8
ISO/CD 11901-5
Tools for pressing -- Gas springs -- Part 5: Safety instructions for usage
30.00 ISO/TC 29/SC 8
ISO 11903:1996
Tools for pressing -- Guide pillar mountings
95.99 ISO/TC 29/SC 8
ISO 11903:2008
Tools for pressing -- Guide pillar mountings
90.93 ISO/TC 29/SC 8
ISO 16366:2001
Tools for pressing -- L-shaped guides
95.99 ISO/TC 29/SC 8
ISO 16366:2008
Tools for pressing -- L-shaped guides
90.93 ISO/TC 29/SC 8
ISO 16367:2001
Tools for pressing -- Guide plates -- U- and V-blocks
95.99 ISO/TC 29/SC 8
ISO 16367:2008
Tools for pressing -- Guide plates -- U- and V-blocks
90.93 ISO/TC 29/SC 8
ISO 18084:2005
Press tools for tablets -- Punches and dies
95.99 ISO/TC 29/SC 8
ISO 18084:2011
Press tools for tablets -- Punches and dies
90.93 ISO/TC 29/SC 8
ISO 20928:2018
Tools for pressing -- Spring plungers with helicoidal compression steel spring or gas spring
60.60 ISO/TC 29/SC 8
ISO 20929:2018
Tools for pressing -- Heel guidings in large stamping and forming dies
60.60 ISO/TC 29/SC 8
ISO/FDIS 21223
Tools for pressing -- Vocabulary
50.00 ISO/TC 29/SC 8
ISO 23480:2008
Tools for pressing -- Sliding plates
95.99 ISO/TC 29/SC 8
ISO 23480:2013
Tools for pressing -- Sliding plates
90.93 ISO/TC 29/SC 8
ISO 23481:2008
Tools for pressing -- Cam driver plates
95.99 ISO/TC 29/SC 8
ISO 23481:2013
Tools for pressing -- Cam driver plates
90.92 ISO/TC 29/SC 8
ISO/CD 23481
Tools for pressing -- Came driver plates
30.99 ISO/TC 29/SC 8

No matching records found