• Filter:

  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 238:1974
Reduction sleeves and extension sockets for tools with Morse taper shanks
95.99 ISO/TC 29
ISO 238:2016
Reduction sleeves and extension sockets for tools with Morse taper shanks
60.60 ISO/TC 29/SC 9
ISO 296:1974
Machine tools — Self-holding tapers for tool shanks
95.99 ISO/TC 39
ISO 296:1991
Machine tools — Self-holding tapers for tool shanks
90.93 ISO/TC 29/SC 9
ISO 297:1982
7/24 tapers for tool shanks for manual changing
95.99 ISO/TC 39
ISO 297:1988
7/24 tapers for tool shanks for manual changing
90.93 ISO/TC 29/SC 9
ISO 299:1973
Machine tool tables — T-slots and corresponding bolts
95.99 ISO/TC 39
ISO 299:1987
Machine tool tables — T-slots and corresponding bolts
90.93 ISO/TC 39
ISO 702-1:1975
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type A
95.99 ISO/TC 39
ISO 702-1:2001
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection
95.99 ISO/TC 39/SC 8
ISO 702-1:2009
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection
90.20 ISO/TC 39/SC 8
ISO 702-2:1975
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 2: Camlock type
95.99 ISO/TC 39/SC 8
ISO 702-2:2007
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type
90.60 ISO/TC 39/SC 8
ISO 702-2:2007/Cor 1:2009
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type — Technical Corrigendum 1
60.60 ISO/TC 39/SC 8
ISO 702-3:1975
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 3: Bayonet type
95.99 ISO/TC 39/SC 8
ISO 702-3:2007
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 3: Bayonet type
90.60 ISO/TC 39/SC 8
ISO 702-4:2004
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 4: Cylindrical connection
90.60 ISO/TC 39/SC 8
ISO 839-1:1976
Milling machine arbors with 7/24 tapers — Part 1: Dimensions
95.99 ISO/TC 29
ISO 839-1:2006
Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation
90.93 ISO/TC 29/SC 9
ISO 839-2:1977
Milling machine arbors with 7/24 tapers — Part 2: Accessories
90.93 ISO/TC 29/SC 9
ISO 1080:1975
Machine tools — Morse taper shanks — Cotter slots with taper keys
90.93 ISO/TC 29/SC 9
ISO 3089:1974
Self centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests)
95.99 ISO/TC 39/SC 8
ISO 3089:1991
Self-centring manually-operated chucks for machine tools — Acceptance test specifications (geometrical tests)
95.99 ISO/TC 39/SC 8
ISO 3089:2005
Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws
90.93 ISO/TC 39/SC 8
ISO 3442-1:2005
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jaws
90.93 ISO/TC 39/SC 8
ISO 3442-2:2005
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 2: Power-operated chucks with tongue and groove type jaws
90.93 ISO/TC 39/SC 8
ISO 3442-3:2007
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 3: Power-operated chucks with serrated jaws
90.60 ISO/TC 39/SC 8
ISO 3442:1975
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
95.99 ISO/TC 39
ISO 3442:1991
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
95.99 ISO/TC 39/SC 8
ISO 3936:1977
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
95.99 ISO/TC 29
ISO 3936:1993
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
90.93 ISO/TC 29/SC 9
ISO 3937-1:2008
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
90.93 ISO/TC 29/SC 9
ISO 3937-2:2008
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
90.93 ISO/TC 29/SC 9
ISO 3937-3:2008
Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface
90.93 ISO/TC 29/SC 9
ISO 3937:1977
Cutter arbors with tenon drive — Dimensions
95.99 ISO/TC 29
ISO 3937:1985
Cutter arbors with tenon drive — Dimensions
95.99 ISO/TC 29
ISO 4202:1978
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
95.99 ISO/TC 29
ISO 4202:2016
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
60.60 ISO/TC 29/SC 9
ISO 4207:1977
Counterbores with Morse taper shanks and detachable pilots
95.99 ISO/TC 29/SC 9
ISO 4207:2016
Counterbores with Morse taper shanks and detachable pilots
60.60 ISO/TC 29/SC 9
ISO 4247:1977
Jig bushes and accessories for drilling purposes — Dimensions
95.99 ISO/TC 29
ISO 4248:1978
Jig bushes — Definitions and nomenclature
90.93 ISO/TC 29/SC 9
ISO 5413:1976
Machine tools — Positive drive of Morse tapers
95.99 ISO/TC 29
ISO 5413:1993
Machine tools — Positive drive of Morse tapers
90.93 ISO/TC 29/SC 9
ISO 5414-1:1982
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
95.99 ISO/TC 29
ISO 5414-1:1985
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
95.99 ISO/TC 29
ISO 5414-1:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks
90.93 ISO/TC 29/SC 9
ISO 5414-2:1982
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks
95.99 ISO/TC 29
ISO 5414-2:2002
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
90.93 ISO/TC 29/SC 9
ISO 5415:1977
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
95.99 ISO/TC 29
ISO 5415:2007
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
90.93 ISO/TC 29/SC 9
ISO 5734:1978
Test conditions of mechanical dividing heads for machine tools — Testing of the accuracy
95.99 ISO/TC 39
ISO 5734:1986
Acceptance conditions of mechanical dividing heads for machine tools — Testing of accuracy
90.93 ISO/TC 39/SC 2
ISO 7388-1:1983
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions
95.99 ISO/TC 29/SC 9
ISO 7388-1:1983/Add 1:1984
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances
95.99 ISO/TC 29
ISO 7388-1:2007
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
90.92 ISO/TC 29/SC 9
ISO 7388-2:1984
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics
95.99 ISO/TC 29/SC 9
ISO 7388-2:2007
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF
90.93 ISO/TC 29/SC 9
ISO 7388-3:2007
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
95.99 ISO/TC 29/SC 9
ISO 7388-3:2013
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
95.99 ISO/TC 29
ISO 7388-3:2016
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
60.60 ISO/TC 29/SC 9
ISO 7572:1984
Conditions of acceptance and installation for work-holding fixed tables of machine tools
95.99 ISO/TC 39/SC 2
ISO 9270-1:2010
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
90.93 ISO/TC 29/SC 9
ISO 9270-2:2010
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF
90.93 ISO/TC 29/SC 9
ISO 9270:1992
7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses
95.99 ISO/TC 29
ISO 9401:1991
Machine tools — Jaw mountings on power chucks
95.99 ISO/TC 39/SC 8
ISO 10649-1:2010
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
95.99 ISO/TC 29
ISO 10649-1:2013
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
90.93 ISO/TC 29/SC 9
ISO 10649-2:2010
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface
95.99 ISO/TC 29
ISO 10649-2:2013
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
90.93 ISO/TC 29/SC 9
ISO 10649-3:2010
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
95.99 ISO/TC 29
ISO 10649-3:2013
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
90.93 ISO/TC 29/SC 9
ISO 10649-4:2010
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
95.99 ISO/TC 29
ISO 10649-4:2013
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
90.93 ISO/TC 29/SC 9
ISO 10649-5:2012
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
90.93 ISO/TC 29/SC 9
ISO 10649-6:2012
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
90.93 ISO/TC 29/SC 9
ISO 10889-1:1997
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
95.99 ISO/TC 29
ISO 10889-1:2004
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
90.93 ISO/TC 29/SC 9
ISO 10889-2:1997
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
95.99 ISO/TC 29
ISO 10889-2:2004
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
95.99 ISO/TC 29
ISO 10889-2:2016
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
60.60 ISO/TC 29/SC 9
ISO 10889-3:1997
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
95.99 ISO/TC 29
ISO 10889-3:2004
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
95.99 ISO/TC 29
ISO 10889-3:2016
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
60.60 ISO/TC 29/SC 9
ISO 10889-4:1997
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
95.99 ISO/TC 29
ISO 10889-4:2004
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
95.99 ISO/TC 29
ISO 10889-4:2016
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
60.60 ISO/TC 29/SC 9
ISO 10889-5:1997
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
95.99 ISO/TC 29
ISO 10889-5:2016
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
60.60 ISO/TC 29/SC 9
ISO 10889-6:1997
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
95.99 ISO/TC 29
ISO 10889-6:2004
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
95.99 ISO/TC 29
ISO 10889-6:2016
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
60.60 ISO/TC 29/SC 9
ISO 10889-7:1997
Tool holders with cylindrical shank — Part 7: Type F with taper seat
95.99 ISO/TC 29
ISO 10889-7:2004
Tool holders with cylindrical shank — Part 7: Type F with taper seat
95.99 ISO/TC 29
ISO 10889-7:2016
Tool holders with cylindrical shank — Part 7: Type F with taper seat
60.60 ISO/TC 29/SC 9
ISO 10889-8:1997
Tool holders with cylindrical shank — Part 8: Type Z, accessories
90.93 ISO/TC 29/SC 9
ISO 10897:1996
Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts
95.99 ISO/TC 29
ISO 10897:2016
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
60.60 ISO/TC 29/SC 9
ISO 12164-1:2001
Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
90.93 ISO/TC 29/SC 9
ISO 12164-2:2001
Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
90.92 ISO/TC 29/SC 9
ISO 12164-3:2008
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
95.99 ISO/TC 29
ISO 12164-3:2014
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
90.92 ISO/TC 29/SC 9
ISO 12164-4:2008
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
95.99 ISO/TC 29
ISO 12164-4:2014
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
90.92 ISO/TC 29/SC 9
ISO/AWI 12164-1
Hollow taper interface with flange contact surface — Part 1: Shanks of type AB, CB and EB
20.00 ISO/TC 29/SC 9
ISO/AWI 12164-3
Hollow taper interface with flange contact surface — Part 3: Shanks of type T, TA and U
20.00 ISO/TC 29/SC 9
ISO/WD 12164-2
Hollow taper interface with flange contact surface — Part 2: Receivers of type A, C and E for hollow taper shanks of type AB, CB and EB
20.20 ISO/TC 29/SC 9
ISO/WD 12164-4
Hollow taper interface with flange contact surface — Part 4: Receivers of type T and U for hollow taper shanks of type T, TA and U
20.20 ISO/TC 29/SC 9
ISO/TR 13618:1993
Code of practice for the safe operation of work-holding chucks used on lathes
95.99 ISO/TC 39/SC 8
ISO 15488:1996
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
95.99 ISO/TC 29
ISO 15488:2003
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
90.93 ISO/TC 29/SC 9
ISO 19719:2010
Machine tools — Work holding chucks — Vocabulary
90.93 ISO/TC 39/SC 8
ISO 26622-1:2008
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
95.99 ISO/TC 29
ISO 26622-1:2017
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
60.60 ISO/TC 29
ISO 26622-2:2008
Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers
90.93 ISO/TC 29/SC 9
ISO 26623-1:2008
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
95.99 ISO/TC 29
ISO 26623-1:2014
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
90.92 ISO/TC 29/SC 9
ISO 26623-2:2008
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
95.99 ISO/TC 29
ISO 26623-2:2014
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
90.20 ISO/TC 29/SC 9
ISO/DIS 26623-1
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
40.99 ISO/TC 29/SC 9

No matching records found. Please try changing the filter settings.