Standards catalogue

23.100.40 - Piping and couplings

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 1179:1981 [Withdrawn]
Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes in industrial applications
95.99 ISO/TC 131/SC 4
ISO 1179-1:2007 [Withdrawn]
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
95.99 ISO/TC 131/SC 4
ISO 1179-1:2013
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
60.60 ISO/TC 131/SC 4
ISO 1179-2:2007 [Withdrawn]
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
95.99 ISO/TC 131/SC 4
ISO 1179-2:2013
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
60.60 ISO/TC 131/SC 4
ISO 1179-3:2007
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
90.93 ISO/TC 131/SC 4
ISO 1179-4:2007
Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
90.93 ISO/TC 131/SC 4
ISO 1436:1978 [Withdrawn]
Rubber products -- Hoses and hose assemblies -- Wire reinforced hydraulic type
95.99 ISO/TC 45
ISO 1436:1991 [Withdrawn]
Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification
95.99 ISO/TC 45/SC 1
ISO 1436:2009
Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification
90.92 ISO/TC 45/SC 1
60.60 ISO/TC 45/SC 1
ISO/DIS 1436 [Under development]
Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification
40.60 ISO/TC 45/SC 1
ISO 1436-1:2001 [Withdrawn]
Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types -- Specification -- Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
ISO 1436-2:2005 [Withdrawn]
Rubber hoses and hose assemblies -- Wire-braid-reinforced hydraulic types -- Specification -- Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
ISO/R 1943:1970 [Withdrawn]
Withdrawal of ISO/R 1943-1970
95.99 ISO/TC 131
ISO 3862:1980 [Withdrawn]
Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type
95.99 ISO/TC 45
ISO 3862:2009
Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids -- Specification
90.92 ISO/TC 45/SC 1
ISO/DIS 3862 [Under development]
Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids -- Specification
40.60 ISO/TC 45/SC 1
ISO 3862-1:2001 [Withdrawn]
Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types -- Specification -- Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
ISO 3862-2:2005 [Withdrawn]
Rubber hoses and hose assemblies -- Rubber-covered spiral-wire-reinforced hydraulic types -- Specification -- Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
ISO 3949:1980 [Withdrawn]
Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type
95.99 ISO/TC 45
ISO 3949:1991 [Withdrawn]
Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification
95.99 ISO/TC 45/SC 1
ISO 3949:2004 [Withdrawn]
Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications -- Specification
95.99 ISO/TC 45/SC 1
ISO 3949:2009
Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications -- Specification
90.92 ISO/TC 45/SC 1
ISO/DIS 3949 [Under development]
Plastics hoses and hose assemblies -- Textile-reinforced types for hydraulic applications -- Specification
40.60 ISO/TC 45/SC 1
ISO 4079:1978 [Withdrawn]
Rubber products -- Hoses and hose assemblies, textile reinforced, for hydraulic purposes
95.99 ISO/TC 45
ISO 4079:1991 [Withdrawn]
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification
95.99 ISO/TC 45/SC 1
ISO 4079:2009 [Withdrawn]
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids -- Specification
95.99 ISO/TC 45/SC 1
ISO 4079:2015
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids -- Specification
90.92 ISO/TC 45/SC 1
ISO/DIS 4079 [Under development]
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids -- Specification
40.60 ISO/TC 45/SC 1
ISO 4079-1:2001 [Withdrawn]
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types -- Specification -- Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
ISO 4079-2:2005 [Withdrawn]
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types -- Specification -- Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
ISO 4397:1978 [Withdrawn]
Fluid power systems and components -- Connectors and associated components -- Outside diameters of tubes and inside diameters of hoses
95.99 ISO/TC 131/SC 4
ISO 4397:1993 [Withdrawn]
Fluid power systems and components -- Connectors and associated components -- Nominal outside diameters of tubes and nominal inside diameters of hoses
95.99 ISO/TC 131/SC 4
ISO 4397:2011
Fluid power connectors and associated components -- Nominal outside diameters of tubes and nominal hose sizes
90.20 ISO/TC 131/SC 4
ISO 4399:1977 [Withdrawn]
Fluid power systems and components -- Connectors and associated components -- Nominal pressures
95.99 ISO/TC 131/SC 4
ISO 4399:1995
Fluid power systems and components -- Connectors and associated components -- Nominal pressures
90.60 ISO/TC 131/SC 4
ISO 6149:1980 [Withdrawn]
Fluid power systems and components -- Metric ports -- Dimensions and design
95.99 ISO/TC 131/SC 4
ISO 6149-1:1993 [Withdrawn]
Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing
95.99 ISO/TC 131/SC 4
ISO 6149-1:2006
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 1: Ports with truncated housing for O-ring seal
90.92 ISO/TC 131/SC 4
ISO/NP 6149-1 [Under development]
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 1: Ports with truncated housing for O-ring seal
10.99 ISO/TC 131/SC 4
ISO 6149-2:1993 [Withdrawn]
Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 2: Heavy-duty (S series) stud ends -- Dimensions, design, test methods and requirements
95.99 ISO/TC 131/SC 4
ISO 6149-2:2006
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends
90.93 ISO/TC 131/SC 4
ISO 6149-3:1993 [Withdrawn]
Connections for fluid power and general use -- Ports and stud ends with ISO 261 threads and O-ring sealing -- Part 3: Light-duty (L series) stud ends -- Dimensions, design, test methods and requirements
95.99 ISO/TC 131/SC 4
ISO 6149-3:2006
Connections for hydraulic fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
90.93 ISO/TC 131/SC 4
ISO 6149-4:2006
Connections for fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
90.92 ISO/TC 131/SC 4
ISO/DIS 6149-4 [Under development]
Connections for fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
40.99 ISO/TC 131/SC 4
ISO 6150:1988
Pneumatic fluid power -- Cylindrical quick-action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 MPa, 1,6 Mpa, and 2,5 MPa) -- Plug connecting dimensions, specifications, application guidelines and testing
90.20 ISO/TC 131/SC 4
ISO 6162:1994 [Withdrawn]
Hydraulic fluid power -- Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) -- Type I metric series and type II inch series
95.99 ISO/TC 131/SC 4
ISO 6162-1:2002 [Withdrawn]
Hydraulic fluid power -- Flange connectors with split or one-piece flange clamps and metric or inch screws -- Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
95.99 ISO/TC 131/SC 4
95.99 ISO/TC 131/SC 4
ISO 6162-1:2012
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
60.60 ISO/TC 131/SC 4
ISO 6162-2:2002 [Withdrawn]
Hydraulic fluid power -- Flange connectors with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51
95.99 ISO/TC 131/SC 4
ISO 6162-2:2012
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
90.92 ISO/TC 131/SC 4
ISO/DIS 6162-2 [Under development]
Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
40.60 ISO/TC 131/SC 4
ISO 6164:1994
Hydraulic fluid power -- Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
90.92 ISO/TC 131/SC 4
ISO/DIS 6164 [Under development]
Hydraulic fluid power -- Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 10 to 80
40.60 ISO/TC 131/SC 4
ISO 6605:1986 [Withdrawn]
Hydraulic fluid power -- Hose assemblies -- Method of test
95.99 ISO/TC 131/SC 4
ISO 6605:2002
Hydraulic fluid power -- Hoses and hose assemblies -- Test methods
90.92 ISO/TC 131/SC 4
ISO/FDIS 6605 [Under development]
Hydraulic fluid power -- Test methods for hoses and hose assemblies
50.00 ISO/TC 131/SC 4
ISO 7241:2014
Hydraulic fluid power -- Dimensions and requirements of quick-action couplings
60.60 ISO/TC 131/SC 4
ISO 7241-1:1987 [Withdrawn]
Hydraulic fluid power -- Quick-action couplings -- Part 1: Dimensions and requirements
95.99 ISO/TC 131/SC 4
ISO 7241-2:1986 [Withdrawn]
Hydraulic fluid power -- Quick-action couplings -- Part 2: Test methods
95.99 ISO/TC 131/SC 4
ISO 7241-2:2000
Hydraulic fluid power -- Quick-action couplings -- Part 2: Test methods
90.92 ISO/TC 131/SC 4
ISO 8434:1986 [Withdrawn]
Hydraulic fluid power -- Connection for tubes and hoses -- Dimensions and designs for 37 degrees flare and 24 degrees flareless fittings
95.99 ISO/TC 131/SC 4
ISO 8434-1:1994 [Withdrawn]
Metallic tube connections for fluid power and general use -- Part 1: 24 degree compression fittings
95.99 ISO/TC 131/SC 4
ISO 8434-1:2007
Metallic tube connections for fluid power and general use -- Part 1: 24 degree cone connectors
90.92 ISO/TC 131/SC 4
ISO/DIS 8434-1 [Under development]
Metallic tube connections for fluid power and general use -- Part 1: 24° cone connectors [revision of ISO 8434-1:2007]
40.60 ISO/TC 131/SC 4
ISO 8434-2:1994 [Withdrawn]
Metallic tube connections for fluid power and general use -- Part 2: 37 degree flared fittings
95.99 ISO/TC 131/SC 4
ISO 8434-2:2007
Metallic tube connections for fluid power and general use -- Part 2: 37 degree flared connectors
90.93 ISO/TC 131/SC 4
ISO 8434-3:1995 [Withdrawn]
Metallic tube connections for fluid power and general use -- Part 3: O-ring face seal fittings
95.99 ISO/TC 131/SC 4
ISO 8434-3:2005
Metallic tube connections for fluid power and general use -- Part 3: O-ring face seal connectors
90.93 ISO/TC 131/SC 4
ISO 8434-4:1995 [Withdrawn]
Metallic tube connections for fluid power and general use -- Part 4: 24 degree cone connectors with O-ring weld-on nipples
95.99 ISO/TC 131/SC 4
ISO 8434-5:1995 [Withdrawn]
Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections
95.99 ISO/TC 131/SC 4
ISO 8434-6:2009
Metallic tube connections for fluid power and general use -- Part 6: 60 degree cone connectors with or without O-ring
90.93 ISO/TC 131/SC 4
ISO 9974-1:1996
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports
90.93 ISO/TC 131/SC 4
ISO 9974-2:1996
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 2: Stud ends with elastomeric sealing (type E)
90.93 ISO/TC 131/SC 4
ISO 9974-3:1996
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 3: Stud ends with metal-to-metal sealing (type B)
90.93 ISO/TC 131/SC 4
ISO 9974-4:2006 [Withdrawn]
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
95.99 ISO/TC 131/SC 4
ISO 9974-4:2016
Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
60.60 ISO/TC 131/SC 4
ISO 10763:1994
Hydraulic fluid power -- Plain-end, seamless and welded precision steel tubes -- Dimensions and nominal working pressures
90.92 ISO/TC 131/SC 4
ISO/CD 10763 [Under development]
Hydraulic fluid power -- Plain-end, seamless and welded precision steel tubes -- Dimensions and nominal working pressures
30.20 ISO/TC 131/SC 4
ISO 11237:2010
Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification
90.92 ISO/TC 45/SC 1
ISO/DIS 11237 [Under development]
Rubber hoses and hose assemblies -- Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -- Specification
40.60 ISO/TC 45/SC 1
ISO 11237-1:2004 [Withdrawn]
Rubber hoses and hose assemblies -- Wire-braid-reinforced compact types for hydraulic applications -- Specification -- Part 1: Oil-based fluid applications
95.99 ISO/TC 45/SC 1
ISO 11237-2:2006 [Withdrawn]
Rubber hoses and hose assemblies -- Wire-braid-reinforced compact types for hydraulic applications -- Specification -- Part 2: Water-based fluid applications
95.99 ISO/TC 45/SC 1
ISO/TR 11340:1994
Rubber and rubber products -- Hydraulic hose assemblies -- External leakage classification for hydraulic systems
90.93 ISO/TC 45/SC 1
ISO/TS 11672:2016
Connectors for fluid power and general use -- Designation and nomenclature
60.60 ISO/TC 131/SC 4
ISO/PRF TS 11686 [Under development]
Connectors for fluid power and general use -- Assembly instructions for connectors with adjustable stud ends and O-ring sealing
50.00 ISO/TC 131/SC 4
ISO 11926-1:1995
Connections for general use and fluid power -- Ports and stud ends with ISO 725 threads and O-ring sealing -- Part 1: Ports with O-ring seal in truncated housing
90.93 ISO/TC 131/SC 4
ISO 11926-2:1995
Connections for general use and fluid power -- Ports and stud ends with ISO 725 threads and O-ring sealing -- Part 2: Heavy-duty (S series) stud ends
90.93 ISO/TC 131/SC 4
ISO 11926-3:1995
Connections for general use and fluid power -- Ports and stud ends with ISO 725 threads and O-ring sealing -- Part 3: Light-duty (L series) stud ends
90.93 ISO/TC 131/SC 4
ISO 12151-1:1999 [Withdrawn]
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
95.99 ISO/TC 131/SC 4
ISO 12151-1:2010
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends
90.93 ISO/TC 131/SC 4
60.60 ISO/TC 131/SC 4
ISO 12151-2:2003
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
90.93 ISO/TC 131/SC 4
ISO 12151-3:1999 [Withdrawn]
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162 flange ends
95.99 ISO/TC 131/SC 4
ISO 12151-3:2010
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
90.93 ISO/TC 131/SC 4
ISO 12151-4:2007
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 4: Hose fittings with ISO 6149 metric stud ends
90.93 ISO/TC 131/SC 4
ISO 12151-5:2007
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 5: Hose fittings with ISO 8434-2 37 degree flared ends
90.93 ISO/TC 131/SC 4
ISO 12151-6:2009
Connections for hydraulic fluid power and general use -- Hose fittings -- Part 6: Hose fittings with ISO 8434-6 60 degree cone ends
90.93 ISO/TC 131/SC 4
ISO 14540:2013
Hydraulic fluid power -- Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar)
60.60 ISO/TC 131/SC 4
ISO 14541:2013
Hydraulic fluid power -- Dimensions and requirements for screw-to-connect quick-action couplings for general purpose
60.60 ISO/TC 131/SC 4
ISO 14743:2004
Pneumatic fluid power -- Push-in connectors for thermoplastic tubes
90.92 ISO/TC 131/SC 4
ISO/CD 14743 [Deleted]
Pneumatic fluid power -- Push-in connectors for thermoplastic tubes
30.98 ISO/TC 131/SC 4
ISO/NP 14743 [Under development]
Pneumatic fluid power -- Push-in connectors for thermoplastic tubes
10.99 ISO/TC 131/SC 4
ISO 15171-1:1999
Connections for fluid power and general use -- Hydraulic couplings for diagnostic purposes -- Part 1: Coupling not for connection under pressure
90.93 ISO/TC 131/SC 4
ISO 15171-2:2000 [Withdrawn]
Connections for fluid power and general use -- Hydraulic couplings for diagnostic purposes -- Part 2: Coupling with M16 x 2 end for connection under pressure
95.99 ISO/TC 131/SC 4
ISO 15171-2:2016
Connections for fluid power and general use -- Hydraulic couplings for diagnostic purposes -- Part 2: Coupling with M16 x 2 end for connection under pressure
60.60 ISO/TC 131/SC 4
ISO 16028:1999
Hydraulic fluid power -- Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) -- Specifications
90.92 ISO/TC 131/SC 4
60.60 ISO/TC 131/SC 4
ISO/CD 16028 [Under development]
Hydraulic fluid power -- Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) -- Specifications
30.99 ISO/TC 131/SC 4
ISO 16030:2001
Pneumatic fluid power -- Connections -- Ports and stud ends
90.93 ISO/TC 131
60.60 ISO/TC 131
ISO/DTS 18409 [Under development]
Hydraulic fluid power -- Hose and hose assemblies -- Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly
30.92 ISO/TC 131/SC 4
ISO 19879:2005 [Withdrawn]
Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections
95.99 ISO/TC 131/SC 4
95.99 ISO/TC 131/SC 4
ISO 19879:2010
Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections
90.92 ISO/TC 131/SC 4
ISO/NP 19879 [Under development]
Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections
10.99 ISO/TC 131/SC 4
ISO 23297:2008
Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications -- Specification
90.92 ISO/TC 45/SC 1
ISO/DIS 23297 [Under development]
Thermoplastics hoses and hose assemblies -- Wire or synthetic yarn reinforced single-pressure types for hydraulic applications -- Specification
40.99 ISO/TC 45/SC 1
ISO 23309:2007
Hydraulic fluid power systems -- Assembled systems -- Methods of cleaning lines by flushing
90.92 ISO/TC 131/SC 6
ISO/DIS 23309 [Under development]
Hydraulic fluid power systems -- Assembled systems -- Methods of cleaning lines by flushing
40.60 ISO/TC 131/SC 6

No matching records found