Standards catalogue

21.200 - Gears

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 53:1974 [Withdrawn]
Cylindrical gears for general and heavy engineering -- Basic rack
95.99 ISO/TC 60
ISO 53:1998
Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
90.93 ISO/TC 60
ISO 54:1977 [Withdrawn]
Cylindrical gears for general engineering and for heavy engineering -- Modules and diametral pitches
95.99 ISO/TC 60
ISO 54:1996
Cylindrical gears for general engineering and for heavy engineering -- Modules
90.93 ISO/TC 60
ISO/R 467:1966 [Withdrawn]
Withdrawal of ISO/R 467-1966
95.99 ISO/TC 60
ISO 677:1976
Straight bevel gears for general engineering and heavy engineering -- Basic rack
90.93 ISO/TC 60
ISO 678:1976
Straight bevel gears for general engineering and heavy engineering -- Modules and diametral pitches
90.93 ISO/TC 60
ISO 701:1976 [Withdrawn]
International gear notation -- Symbols for geometrical data
95.99 ISO/TC 60
ISO 701:1998
International gear notation -- Symbols for geometrical data
90.93 ISO/TC 60/SC 1
ISO/R 1122:1969 [Withdrawn]
Withdrawal of ISO/R 1122-1969
95.99 ISO/TC 60
ISO 1122-1:1983 [Withdrawn]
Glossary of gear terms -- Part 1: Geometrical definitions
95.99 ISO/TC 60
ISO 1122-1:1998
Vocabulary of gear terms -- Part 1: Definitions related to geometry
90.93 ISO/TC 60/SC 1
60.60 ISO/TC 60/SC 1
60.60 ISO/TC 60/SC 1
ISO 1122-2:1999
Vocabulary of gear terms -- Part 2: Definitions related to worm gear geometry
90.93 ISO/TC 60/SC 1
ISO 1328:1975 [Withdrawn]
Parallel involute gears -- ISO system of accuracy
95.99 ISO/TC 60
ISO 1328-1:1995 [Withdrawn]
Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
95.99 ISO/TC 60
ISO 1328-1:2013
Cylindrical gears -- ISO system of flank tolerance classification -- Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
60.60 ISO/TC 60
ISO 1328-2:1997
Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
90.92 ISO/TC 60
ISO/NP 1328-2 [Under development]
Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information
10.99 ISO/TC 60
ISO 1340:1976 [Withdrawn]
Cylindrical gears -- Information to be given to the manufacturer by the purchaser in order to obtain the gear required
95.99 ISO/TC 60
ISO 1341:1976 [Withdrawn]
Straight bevel gears -- Information to be given to the manufacturer by the purchaser in order to obtain the gear required
95.99 ISO/TC 60
ISO 2203:1973
Technical drawings -- Conventional representation of gears
90.93 ISO/TC 10/SC 6
ISO 2490:1975 [Withdrawn]
Single-start solid (monobloc) gear hobs with axial keyway, 1 to 20 module and 1 to 20 diametral pitch -- Nominal dimensions
95.99 ISO/TC 60
ISO 2490:1996 [Withdrawn]
Single-start solid (monobloc) gear hobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions
95.99 ISO/TC 60
ISO 2490:2007
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module -- Nominal dimensions
90.93 ISO/TC 60/SC 1
ISO/TR 4467:1982 [Withdrawn]
Addendum modification of the teeth of cylindrical gears for speed-reducing and speed-increasing gear pairs
95.99 ISO/TC 60
ISO 4468:1982 [Withdrawn]
Gear hobs -- Single start -- Accuracy requirements
95.99 ISO/TC 60
ISO 4468:2009
Gear hobs -- Accuracy requirements
90.92 ISO/TC 60/SC 1
60.60 ISO/TC 60/SC 1
ISO/NP 4468 [Under development]
Gear hobs -- Accuracy requirements
10.99 ISO/TC 60/SC 1
ISO 6336-1:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
95.99 ISO/TC 60/SC 2
95.99 ISO/TC 60/SC 2
95.99 ISO/TC 60/SC 2
ISO 6336-1:2006
Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
90.92 ISO/TC 60/SC 2
60.60 ISO/TC 60/SC 2
ISO/NP 6336-1 [Under development]
Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
10.99 ISO/TC 60/SC 2
ISO 6336-2:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
95.99 ISO/TC 60/SC 2
95.99 ISO/TC 60/SC 2
95.99 ISO/TC 60/SC 2
ISO 6336-2:2006
Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
90.92 ISO/TC 60/SC 2
60.60 ISO/TC 60/SC 2
ISO/NP 6336-2 [Under development]
Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
10.99 ISO/TC 60/SC 2
ISO 6336-3:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
95.99 ISO/TC 60/SC 2
95.99 ISO/TC 60/SC 2
ISO 6336-3:2006
Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
90.92 ISO/TC 60/SC 2
60.60 ISO/TC 60/SC 2
ISO/NP 6336-3 [Under development]
Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
10.99 ISO/TC 60/SC 2
ISO 6336-5:1996 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
95.99 ISO/TC 60/SC 2
ISO 6336-5:2003 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
95.99 ISO/TC 60/SC 2
ISO 6336-5:2016
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
60.60 ISO/TC 60/SC 2
ISO 6336-6:2006
Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
90.92 ISO/TC 60/SC 2
60.60 ISO/TC 60/SC 2
ISO/NP 6336-6 [Under development]
Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
10.99 ISO/TC 60/SC 2
ISO/TS 6336-20:2017
Calculation of load capacity of spur and helical gears -- Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Flash temperature method
60.60 ISO/TC 60/SC 2
ISO/TS 6336-21 [Under development]
Calculation of load capacity of spur and helical gears -- Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) -- Integral temperature method
60.00 ISO/TC 60/SC 2
ISO/TR 6336-30 [Under development]
Calculation of load capacity of spur and helical gears -- Part 30: Calculation examples for the application of ISO 6336 parts 1,2,3,5
60.00 ISO/TC 60/SC 2
ISO 8579-1:1993 [Withdrawn]
Acceptance code for gears -- Part 1: Determination of airborne sound power levels emitted by gear units
95.99 ISO/TC 60
ISO 8579-1:2002
Acceptance code for gear units -- Part 1: Test code for airborne sound
90.93 ISO/TC 60
ISO 8579-2:1993 [Withdrawn]
Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing
95.99 ISO/TC 60
ISO 9083:2001
Calculation of load capacity of spur and helical gears -- Application to marine gears
90.93 ISO/TC 60/SC 2
ISO 9084:2000 [Withdrawn]
Calculation of load capacity of spur and helical gears -- Application to high speed gears and gears of similar requirements
95.99 ISO/TC 60/SC 2
ISO 9085:2002
Calculation of load capacity of spur and helical gears -- Application for industrial gears
90.93 ISO/TC 60/SC 2
ISO/TR 10064-1:1992 [Withdrawn]
Code of inspection practice -- Part 1: Inspection of corresponding flanks of gear teeth
95.99 ISO/TC 60
95.99 ISO/TC 60
ISO/TR 10064-1:2017
Code of inspection practice -- Part 1: Measurement of cylindrical gear tooth flanks
60.60 ISO/TC 60
ISO/NP TR 10064-2 [Under development]
Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
10.99 ISO/TC 60
ISO/TR 10064-2:1996
Code of inspection practice -- Part 2: Inspection related to radial composite deviations, runout, tooth thickness and backlash
90.92 ISO/TC 60
60.60 ISO/TC 60
60.60 ISO/TC 60
ISO/TR 10064-3:1996
Code of inspection practice -- Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
90.93 ISO/TC 60
60.60 ISO/TC 60
ISO/TR 10064-4:1998
Code of inspection practice -- Part 4: Recommendations relative to surface texture and tooth contact pattern checking
90.93 ISO/TC 60
60.60 ISO/TC 60
ISO/TR 10064-5:2005
Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments
90.93 ISO/TC 60
60.60 ISO/TC 60
ISO/TR 10064-6:2009
Code of inspection practice -- Part 6: Bevel gear measurement methods
90.93 ISO/TC 60
ISO 10300-1:2001 [Withdrawn]
Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors
95.99 ISO/TC 60/SC 2
ISO 10300-1:2014
Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors
60.60 ISO/TC 60/SC 2
ISO 10300-2:2001 [Withdrawn]
Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting)
95.99 ISO/TC 60/SC 2
ISO 10300-2:2014
Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting)
60.60 ISO/TC 60/SC 2
ISO 10300-3:2001 [Withdrawn]
Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength
95.99 ISO/TC 60/SC 2
ISO 10300-3:2014
Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength
60.60 ISO/TC 60/SC 2
ISO/TR 10300-30 [Under development]
Calculation of load capacity of bevel gears -- Part 30: ISO rating system for bevel and hypoid gears -- Sample calculations
60.00 ISO/TC 60/SC 2
ISO 10347:1999 [Withdrawn]
Worm gears -- Geometry of worms -- Name plates for worm gear units centre distances, information to be supplied to gear manufacturer by the purchaser
95.99 ISO/TC 60/SC 1
ISO/TR 10495:1997 [Withdrawn]
Cylindrical gears -- Calculation of service life under variable loads -- Conditions for cylindrical gears according to ISO 6336
95.99 ISO/TC 60/SC 2
ISO 10825:1995
Gears -- Wear and damage to gear teeth -- Terminology
90.92 ISO/TC 60/SC 1
ISO/NP 10825 [Under development]
Gears -- Wear and damage to gear teeth -- Terminology
10.99 ISO/TC 60/SC 1
ISO/TR 10828:1997 [Withdrawn]
Worm gears -- Geometry of worm profiles
95.99 ISO/TC 60/SC 1
ISO/TR 10828:2015
Worm gears -- Worm profiles and gear mesh geometry
60.60 ISO/TC 60/SC 1
95.99 ISO/TC 60/SC 1
ISO/TR 13593:1999 [Withdrawn]
Enclosed gear drives for industrial applications
95.99 ISO/TC 60
95.99 ISO/TC 60
ISO 13691:2001
Petroleum and natural gas industries -- High-speed special-purpose gear units
90.93 ISO/TC 60/SC 2
ISO/DTS 13989-1 [Deleted]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 1: Flash temperature method
30.98 ISO/TC 60/SC 2
ISO/TR 13989-1:2000 [Withdrawn]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 1: Flash temperature method
95.99 ISO/TC 60/SC 2
ISO/DTS 13989-2 [Deleted]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method
30.98 ISO/TC 60/SC 2
ISO/TR 13989-2:2000 [Withdrawn]
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method
95.99 ISO/TC 60/SC 2
ISO 14104:1995 [Withdrawn]
Gears -- Surface temper etch inspection after grinding
95.99 ISO/TC 60/SC 2
ISO 14104:2014 [Withdrawn]
Gears -- Surface temper etch inspection after grinding, chemical method
95.99 ISO/TC 60/SC 2
ISO 14104:2017
Gears -- Surface temper etch inspection after grinding, chemical method
60.60 ISO/TC 60/SC 2
ISO/TR 14179-1:2001
Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature
90.93 ISO/TC 60/SC 2
ISO/TR 14179-2:2001
Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity
90.93 ISO/TC 60/SC 2
ISO/NP TR 14521 [Under development]
Gears -- Calculation of load capacity of wormgears
10.99 ISO/TC 60/SC 1
ISO/TR 14521:2010
Gears -- Calculation of load capacity of wormgears
90.92 ISO/TC 60/SC 1
ISO 14635-1:2000
Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
90.93 ISO/TC 60/SC 2
ISO 14635-2:2004
Gears -- FZG test procedures -- Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
90.93 ISO/TC 60/SC 2
ISO 14635-3:2005
Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
90.93 ISO/TC 60/SC 2
ISO/TR 15144-1:2010 [Withdrawn]
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
95.99 ISO/TC 60/SC 2
ISO/TR 15144-1:2014
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
90.92 ISO/TC 60/SC 2
ISO/TR 15144-2:2014
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 2: Examples of calculation for micropitting
90.92 ISO/TC 60/SC 2
ISO 17485:2006
Bevel gears -- ISO system of accuracy
90.93 ISO/TC 60
ISO 18653:2003
Gears -- Evaluation of instruments for the measurement of individual gears
90.93 ISO/TC 60
ISO/TR 18792:2008
Lubrication of industrial gear drives
90.93 ISO/TC 60/SC 2
ISO/DTR 19041 [Deleted]
ISO rating system for bevel and hypoid gears -- Sample calculations
30.98 ISO/TC 60/SC 2
ISO 21771:2007
Gears -- Cylindrical involute gears and gear pairs -- Concepts and geometry
90.93 ISO/TC 60/SC 1
ISO/TR 22849:2011
Design recommendations for bevel gears
60.60 ISO/TC 60/SC 2
ISO/DTR 23425 [Deleted]
Calculation examples for the application of ISO 6336 -- Calculation of load capacity of spur and helical gears
30.98 ISO/TC 60/SC 2
ISO 23509:2006 [Withdrawn]
Bevel and hypoid gear geometry
95.99 ISO/TC 60/SC 2
ISO 23509:2016
Bevel and hypoid gear geometry
60.60 ISO/TC 60/SC 2
IEC 61400-4:2012
Wind turbines -- Part 4: Design requirements for wind turbine gearboxes
90.93 ISO/TC 60
ISO 81400-4:2005 [Withdrawn]
Wind turbines -- Part 4: Design and specification of gearboxes
95.99 ISO/TC 60
95.99 ISO/TC 60

No matching records found