Standards catalogue

17.160 - Vibrations, shock and vibration measurements Including measuring instruments and installations

Vibration and shock with respect to human beings, see 13.160
Balancing and balancing machines, see 21.120.40
Seismic and vibration protection, see 91.120.25
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 2017:1982 [Withdrawn]
Vibration and shock -- Isolators -- Procedure for specifying characteristics
95.99 ISO/TC 108
ISO 2017-1:2005
Mechanical vibration and shock -- Resilient mounting systems -- Part 1: Technical information to be exchanged for the application of isolation systems
90.93 ISO/TC 108
ISO 2017-2:2007
Mechanical vibration and shock -- Resilient mounting systems -- Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
90.93 ISO/TC 108
ISO 2017-3:2015
Mechanical vibration and shock -- Resilient mounting systems -- Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
60.60 ISO/TC 108
ISO 2041:1975 [Withdrawn]
Vibration and shock -- Vocabulary
95.99 ISO/TC 108
ISO 2041:1990 [Withdrawn]
Vibration and shock -- Vocabulary
95.99 ISO/TC 108
ISO 2041:2009
Mechanical vibration, shock and condition monitoring -- Vocabulary
90.93 ISO/TC 108
ISO/DIS 2041 [Under development]
Mechanical vibration, shock and condition monitoring -- Vocabulary
40.99 ISO/TC 108
ISO 2372:1974 [Withdrawn]
Mechanical vibration of machines with operating speeds from 10 to 200 rev/s -- Basis for specifying evaluation standards
95.99 ISO/TC 108/SC 2
95.99 ISO/TC 108/SC 2
ISO 2373:1987 [Withdrawn]
Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm -- Measurement and evaluation of the vibration severity
95.99 ISO/TC 108/SC 2
ISO 2954:1975 [Withdrawn]
Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity
95.99 ISO/TC 108/SC 3
ISO 2954:2012
Mechanical vibration of rotating and reciprocating machinery -- Requirements for instruments for measuring vibration severity
90.60 ISO/TC 108
ISO 3046-5:1978 [Withdrawn]
Reciprocating internal combustion engines -- Performance -- Part 5: Torsional vibrations
95.99 ISO/TC 70
ISO 3046-5:2001
Reciprocating internal combustion engines -- Performance -- Part 5: Torsional vibrations
90.93 ISO/TC 70
ISO 3945:1977 [Withdrawn]
Mechanical vibration of large rotating machines with speed range from 10 to 200 rev/s -- Measurement and evaluation of vibration severity in situ
95.99 ISO/TC 108
ISO 3945:1985 [Withdrawn]
Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s -- Measurement and evaluation of vibration severity in situ
95.99 ISO/TC 108/SC 2
ISO 4548-7:1990 [Withdrawn]
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test
95.99 ISO/TC 70/SC 7
ISO 4548-7:2012
Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 7: Vibration fatigue test
60.60 ISO/TC 70/SC 7
ISO 4866:1990 [Withdrawn]
Mechanical vibration and shock -- Vibration of buildings -- Guidelines for the measurement of vibrations and evaluation of their effects on buildings
95.99 ISO/TC 108/SC 2
95.99 ISO/TC 108/SC 2
95.99 ISO/TC 108/SC 2
ISO 4866:2010
Mechanical vibration and shock -- Vibration of fixed structures -- Guidelines for the measurement of vibrations and evaluation of their effects on structures
90.93 ISO/TC 108/SC 2
ISO 4867:1984 [Withdrawn]
Code for the measurement and reporting of shipboard vibration data
95.99 ISO/TC 108/SC 2
ISO 4868:1984 [Withdrawn]
Code for the measurement and reporting of local vibration data of ship structures and equipment
95.99 ISO/TC 108/SC 2
ISO 5344:1980 [Withdrawn]
Electrodynamic test equipment for generating vibration -- Methods of describing equipment characteristics
95.99 ISO/TC 108/SC 6
ISO 5344:2004
Electrodynamic vibration generating systems -- Performance characteristics
90.93 ISO/TC 108/SC 6
60.60 ISO/TC 108/SC 6
ISO 5347-0:1987 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 0: Basic concepts
95.99 ISO/TC 108/SC 3
95.99 ISO/TC 108/SC 3
95.99 ISO/TC 108/SC 3
ISO 5347-1:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 1: Primary vibration calibration by laser interferometry
95.99 ISO/TC 108/SC 3
ISO 5347-2:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 2: Primary shock calibration by light cutting
95.99 ISO/TC 108/SC 3
ISO 5347-3:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 3: Secondary vibration calibration
95.99 ISO/TC 108/SC 3
ISO 5347-4:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 4: Secondary shock calibration
95.99 ISO/TC 108/SC 3
ISO 5347-5:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 5: Calibration by Earth's gravitation
95.99 ISO/TC 108/SC 3
ISO 5347-6:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 6: Primary vibration calibration at low frequencies
95.99 ISO/TC 108/SC 3
ISO 5347-7:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 7: Primary calibration by centrifuge
95.99 ISO/TC 108/SC 3
ISO 5347-8:1993
Methods for the calibration of vibration and shock pick-ups -- Part 8: Primary calibration by dual centrifuge
90.93 ISO/TC 108
ISO 5347-9:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 9: Secondary vibration calibration by comparison of phase angles
95.99 ISO/TC 108/SC 3
ISO 5347-10:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 10: Primary calibration by high impact shocks
95.99 ISO/TC 108/SC 3
ISO 5347-11:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 11: Testing of transverse vibration sensitivity
95.99 ISO/TC 108/SC 3
ISO 5347-12:1993
Methods for the calibration of vibration and shock pick-ups -- Part 12: Testing of transverse shock sensitivity
90.93 ISO/TC 108
ISO 5347-13:1993
Methods for the calibration of vibration and shock pick-ups -- Part 13: Testing of base strain sensitivity
90.93 ISO/TC 108
ISO 5347-14:1993 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 14: Resonance frequency testing of undamped accelerometers on a steel block
95.99 ISO/TC 108/SC 3
ISO 5347-15:1993
Methods for the calibration of vibration and shock pick-ups -- Part 15: Testing of acoustic sensitivity
90.93 ISO/TC 108
ISO 5347-16:1993
Methods for the calibration of vibration and shock pick-ups -- Part 16: Testing of mounting torque sensitivity
90.93 ISO/TC 108
ISO 5347-17:1993
Methods for the calibration of vibration and shock pick-ups -- Part 17: Testing of fixed temperature sensitivity
90.92 ISO/TC 108
ISO 5347-18:1993
Methods for the calibration of vibration and shock pick-ups -- Part 18: Testing of transient temperature sensitivity
90.93 ISO/TC 108
ISO 5347-19:1993
Methods for the calibration of vibration and shock pick-ups -- Part 19: Testing of magnetic field sensitivity
90.92 ISO/TC 108
ISO 5347-20:1997 [Withdrawn]
Methods for the calibration of vibration and shock pick-ups -- Part 20: Primary vibration calibration by the reciprocity method
95.99 ISO/TC 108/SC 3
ISO 5347-22:1997
Methods for the calibration of vibration and shock pick-ups -- Part 22: Accelerometer resonance testing -- General methods
90.60 ISO/TC 108
ISO 5348:1987 [Withdrawn]
Mechanical vibration and shock -- Mechanical mounting of accelerometers
95.99 ISO/TC 108/SC 3
ISO 5348:1998
Mechanical vibration and shock -- Mechanical mounting of accelerometers
90.93 ISO/TC 108
ISO 6070:1981
Auxiliary tables for vibration generators -- Methods of describing equipment characteristics
90.92 ISO/TC 108/SC 6
60.60 ISO/TC 108/SC 6
ISO 6954:1984 [Withdrawn]
Mechanical vibration and shock -- Guidelines for the overall evaluation of vibration in merchant ships
95.99 ISO/TC 108/SC 2
ISO 6954:2000 [Withdrawn]
Mechanical vibration -- Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
95.99 ISO/TC 108/SC 2
ISO 7626-1:1986 [Withdrawn]
Vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic definitions and transducers
95.99 ISO/TC 108
ISO 7626-1:2011
Mechanical vibration and shock -- Experimental determination of mechanical mobility -- Part 1: Basic terms and definitions, and transducer specifications
90.93 ISO/TC 108
ISO 7626-2:1990 [Withdrawn]
Vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter
95.99 ISO/TC 108
ISO 7626-2:2015
Mechanical vibration and shock -- Experimental determination of mechanical mobility -- Part 2: Measurements using single-point translation excitation with an attached vibration exciter
60.60 ISO/TC 108
ISO 7626-5:1994
Vibration and shock -- Experimental determination of mechanical mobility -- Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
90.93 ISO/TC 108
ISO/CD 7626-5 [Under development]
Vibration and shock -- Experimental determination of mechanical mobility -- Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
30.99 ISO/TC 108
ISO 7919-1:1986 [Withdrawn]
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation -- Part 1: General guidelines
95.99 ISO/TC 108/SC 2
ISO 7919-1:1996 [Withdrawn]
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 1: General guidelines
95.99 ISO/TC 108/SC 2
ISO 7919-2:1996 [Withdrawn]
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 2: Large land-based steam turbine generator sets
95.99 ISO/TC 108/SC 2
ISO 7919-2:2001 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
95.99 ISO/TC 108/SC 2
ISO 7919-2:2009 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
95.99 ISO/TC 108/SC 2
ISO 7919-3:1996 [Withdrawn]
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 3: Coupled industrial machines
95.99 ISO/TC 108/SC 2
95.99 ISO/TC 108/SC 2
ISO 7919-3:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 3: Coupled industrial machines
90.93 ISO/TC 108/SC 2
60.60 ISO/TC 108/SC 2
ISO 7919-4:1996 [Withdrawn]
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 4: Gas turbine sets
95.99 ISO/TC 108/SC 2
ISO 7919-4:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 4: Gas turbine sets with fluid-film bearings
90.92 ISO/TC 108/SC 2
60.60 ISO/TC 108/SC 2
ISO 7919-5:1997 [Withdrawn]
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 5: Machine sets in hydraulic power generating and pumping plants
95.99 ISO/TC 108/SC 2
ISO 7919-5:2005
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 5: Machine sets in hydraulic power generating and pumping plants
90.92 ISO/TC 108/SC 2
ISO 8002:1986
Mechanical vibrations -- Land vehicles -- Method for reporting measured data
90.93 ISO/TC 108/SC 2
ISO 8042:1988
Shock and vibration measurements -- Characteristics to be specified for seismic pick-ups
90.93 ISO/TC 108
ISO 8528-9:1995 [Withdrawn]
Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations
95.99 ISO/TC 70
ISO 8528-9:2017
Reciprocating internal combustion engine driven alternating current generating sets -- Part 9: Measurement and evaluation of mechanical vibrations
60.60 ISO/TC 70
ISO 8568:1989 [Withdrawn]
Mechanical shock -- Testing machines -- Characteristics and performance
95.99 ISO/TC 108
ISO 8568:2007
Mechanical shock -- Testing machines -- Characteristics and performance
90.93 ISO/TC 108/SC 6
ISO 8569:1989 [Withdrawn]
Mechanical vibration -- Shock-and-vibration-sensitive electronic equipment -- Methods of measurement and reporting data of shock and vibration effects in buildings
95.99 ISO/TC 108/SC 2
ISO 8569:1996 [Withdrawn]
Mechanical vibration and shock -- Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
95.99 ISO/TC 108/SC 2
ISO 8579-2:1993 [Withdrawn]
Acceptance code for gears -- Part 2: Determination of mechanical vibrations of gear units during acceptance testing
95.99 ISO/TC 60
ISO 8608:1995 [Withdrawn]
Mechanical vibration -- Road surface profiles -- Reporting of measured data
95.99 ISO/TC 108/SC 2
ISO 8608:2016
Mechanical vibration -- Road surface profiles -- Reporting of measured data
60.60 ISO/TC 108/SC 2
ISO 8626:1989
Servo-hydraulic test equipment for generating vibration -- Method of describing characteristics
90.93 ISO/TC 108/SC 6
60.60 ISO/TC 108/SC 6
ISO 9688:1990
Mechanical vibration and shock -- Analytical methods of assessing shock resistance of mechanical systems -- Information exchange between suppliers and users of analyses
90.93 ISO/TC 108
ISO 10055:1996
Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components
90.93 ISO/TC 108/SC 2
ISO 10112:1991
Damping materials -- Graphical presentation of the complex modulus
90.60 ISO/TC 108
ISO/TS 10811-1:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 1: Measurement and evaluation
90.93 ISO/TC 108/SC 2
ISO/TS 10811-2:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 2: Classification
90.93 ISO/TC 108/SC 2
ISO 10813-1:2004
Vibration generating machines -- Guidance for selection -- Part 1: Equipment for environmental testing
90.93 ISO/TC 108/SC 6
60.60 ISO/TC 108/SC 6
ISO 10815:1996 [Withdrawn]
Mechanical vibration -- Measurement of vibration generated internally in railway tunnels by the passage of trains
95.99 ISO/TC 108/SC 2
ISO 10815:2016
Mechanical vibration -- Measurement of vibration generated internally in railway tunnels by the passage of trains
60.60 ISO/TC 108/SC 2
ISO 10816-1:1995 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 1: General guidelines
95.99 ISO/TC 108/SC 2
95.99 ISO/TC 108/SC 2
ISO 10816-2:1996 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Large land-based steam turbine generator sets in excess of 50 MW
95.99 ISO/TC 108/SC 2
ISO 10816-2:2001 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
95.99 ISO/TC 108/SC 2
95.99 ISO/TC 108/SC 2
ISO 10816-2:2009 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
95.99 ISO/TC 108/SC 2
ISO 10816-3:1998 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
95.99 ISO/TC 108/SC 2
ISO 10816-3:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
90.93 ISO/TC 108/SC 2
60.60 ISO/TC 108/SC 2
ISO 10816-4:1998 [Withdrawn]
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine driven sets excluding aircraft derivatives
95.99 ISO/TC 108/SC 2
ISO 10816-4:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine sets with fluid-film bearings
90.92 ISO/TC 108/SC 2
60.60 ISO/TC 108/SC 2
ISO 10816-5:2000
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 5: Machine sets in hydraulic power generating and pumping plants
90.92 ISO/TC 108/SC 2
ISO 10816-6:1995
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 6: Reciprocating machines with power ratings above 100 kW
90.93 ISO/TC 108/SC 2
60.60 ISO/TC 108/SC 2
ISO 10816-7:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
90.93 ISO/TC 108/SC 2
ISO 10816-8:2014
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 8: Reciprocating compressor systems
60.60 ISO/TC 108/SC 2
ISO 10816-8:2014/DAmd 1 [Under development]
40.60 ISO/TC 108/SC 2
ISO 10816-21:2015
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 21: Horizontal axis wind turbines with gearbox
60.60 ISO/TC 108/SC 2
ISO 10817-1:1998
Rotating shaft vibration measuring systems -- Part 1: Relative and absolute sensing of radial vibration
90.93 ISO/TC 108
ISO 13372:2004 [Withdrawn]
Condition monitoring and diagnostics of machines -- Vocabulary
95.99 ISO/TC 108/SC 5
ISO 13372:2012
Condition monitoring and diagnostics of machines -- Vocabulary
90.20 ISO/TC 108/SC 5
ISO 13373-1:2002
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 1: General procedures
90.93 ISO/TC 108/SC 2
ISO 13373-2:2005 [Withdrawn]
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data
95.99 ISO/TC 108/SC 2
ISO 13373-2:2016
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data
60.60 ISO/TC 108/SC 2
ISO 13373-3:2015
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 3: Guidelines for vibration diagnosis
60.60 ISO/TC 108/SC 2
ISO/CD 13373-5 [Under development]
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 5: Diagnostic techniques for fans and blowers
30.60 ISO/TC 108/SC 2
ISO 13373-7:2017
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
60.60 ISO/TC 108/SC 2
ISO 13373-9 [Under development]
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 9: Diagnostic techniques for electric motors
60.00 ISO/TC 108/SC 2
ISO 13374-1:2003
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 1: General guidelines
90.93 ISO/TC 108/SC 5
ISO 13374-2:2007
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 2: Data processing
90.93 ISO/TC 108/SC 5
ISO 13374-3:2012
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 3: Communication
90.93 ISO/TC 108/SC 5
ISO 13374-4:2015
Condition monitoring and diagnostics of machine systems -- Data processing, communication and presentation -- Part 4: Presentation
60.60 ISO/TC 108/SC 5
ISO 13379:2003 [Withdrawn]
Condition monitoring and diagnostics of machines -- General guidelines on data interpretation and diagnostics techniques
95.99 ISO/TC 108/SC 5
ISO 13379-1:2012
Condition monitoring and diagnostics of machines -- Data interpretation and diagnostics techniques -- Part 1: General guidelines
90.60 ISO/TC 108/SC 5
ISO 13379-2:2015
Condition monitoring and diagnostics of machines -- Data interpretation and diagnostics techniques -- Part 2: Data-driven applications
60.60 ISO/TC 108/SC 5
ISO 13380:2002 [Withdrawn]
Condition monitoring and diagnostics of machines -- General guidelines on using performance parameters
95.99 ISO/TC 108/SC 5
ISO 13381-1:2004 [Withdrawn]
Condition monitoring and diagnostics of machines -- Prognostics -- Part 1: General guidelines
95.99 ISO/TC 108/SC 5
ISO 13381-1:2015
Condition monitoring and diagnostics of machines -- Prognostics -- Part 1: General guidelines
60.60 ISO/TC 108/SC 5
ISO 14695:2003
Industrial fans -- Method of measurement of fan vibration
90.93 ISO/TC 117
60.60 ISO/TC 117
ISO/CD 14830-1 [Under development]
Condition monitoring and diagnostics of machines systems -- Tribology-based monitoring and diagnostics -- Part 1: General guidelines
30.20 ISO/TC 108/SC 5
ISO 14837-1:2005
Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 1: General guidance
90.93 ISO/TC 108/SC 2
ISO/PRF TS 14837-31 [Under development]
Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
50.20 ISO/TC 108/SC 2
ISO/TS 14837-32:2015
Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 32: Measurement of dynamic properties of the ground
60.60 ISO/TC 108/SC 2
ISO 14839-1:2002
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 1: Vocabulary
90.92 ISO/TC 108/SC 2
60.60 ISO/TC 108/SC 2
ISO/CD 14839-1 [Under development]
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 1: Vocabulary
30.60 ISO/TC 108/SC 2
ISO 14839-2:2004
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 2: Evaluation of vibration
90.93 ISO/TC 108/SC 2
ISO 14839-3:2006
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 3: Evaluation of stability margin
90.93 ISO/TC 108/SC 2
ISO 14839-4:2012
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 4: Technical guidelines
90.93 ISO/TC 108/SC 2
ISO 14963:2003
Mechanical vibration and shock -- Guidelines for dynamic tests and investigations on bridges and viaducts
90.93 ISO/TC 108/SC 2
ISO 14964:2000 [Withdrawn]
Mechanical vibration and shock -- Vibration of stationary structures -- Specific requirements for quality management in measurement and evaluation of vibration
95.99 ISO/TC 108/SC 2
ISO 15230:2007
Mechanical vibration and shock -- Coupling forces at the man--machine interface for hand-transmitted vibration
90.92 ISO/TC 108/SC 4
ISO/CD 15230 [Under development]
Mechanical vibration and shock -- Coupling forces at the man--machine interface for hand-transmitted vibration
30.60 ISO/TC 108/SC 4
ISO 15261:2004
Vibration and shock generating systems -- Vocabulary
90.93 ISO/TC 108/SC 6
60.60 ISO/TC 108/SC 6
ISO 16063-1:1998
Methods for the calibration of vibration and shock transducers -- Part 1: Basic concepts
90.93 ISO/TC 108
60.60 ISO/TC 108
ISO 16063-11:1999
Methods for the calibration of vibration and shock transducers -- Part 11: Primary vibration calibration by laser interferometry
90.93 ISO/TC 108
ISO 16063-12:2002
Methods for the calibration of vibration and shock transducers -- Part 12: Primary vibration calibration by the reciprocity method
90.60 ISO/TC 108
60.60 ISO/TC 108
ISO 16063-13:2001
Methods for the calibration of vibration and shock transducers -- Part 13: Primary shock calibration using laser interferometry
90.60 ISO/TC 108
ISO 16063-15:2006
Methods for the calibration of vibration and shock transducers -- Part 15: Primary angular vibration calibration by laser interferometry
90.93 ISO/TC 108
ISO 16063-16:2014
Methods for the calibration of vibration and shock transducers -- Part 16: Calibration by Earth's gravitation
60.60 ISO/TC 108
ISO 16063-17:2016
Methods for the calibration of vibration and shock transducers -- Part 17: Primary calibration by centrifuge
60.60 ISO/TC 108
ISO 16063-21:2003
Methods for the calibration of vibration and shock transducers -- Part 21: Vibration calibration by comparison to a reference transducer
90.93 ISO/TC 108
60.60 ISO/TC 108
60.60 ISO/TC 108
ISO 16063-22:2005
Methods for the calibration of vibration and shock transducers -- Part 22: Shock calibration by comparison to a reference transducer
90.93 ISO/TC 108
60.60 ISO/TC 108
ISO 16063-31:2009
Methods for the calibration of vibration and shock transducers -- Part 31: Testing of transverse vibration sensitivity
90.93 ISO/TC 108
ISO 16063-32:2016
Methods for the calibration of vibration and shock transducers -- Part 32: Resonance testing -- Testing the frequency and the phase response of accelerometers by means of shock excitation
60.60 ISO/TC 108
ISO 16063-33 [Under development]
Methods for the calibration of vibration and shock transducers -- Part 33: Testing of magnetic field sensitivity
60.00 ISO/TC 108
ISO/CD 16063-34 [Under development]
Methods for the calibration of vibration and shock pick-ups -- Part 34: Testing of fixed temperature sensitivity
30.92 ISO/TC 108
ISO 16063-41:2011
Methods for the calibration of vibration and shock transducers -- Part 41: Calibration of laser vibrometers
90.93 ISO/TC 108
ISO 16063-42:2014
Methods for the calibration of vibration and shock transducers -- Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
60.60 ISO/TC 108
ISO 16063-43:2015
Methods for the calibration of vibration and shock transducers -- Part 43: Calibration of accelerometers by model-based parameter identification
60.60 ISO/TC 108
ISO/DIS 16063-44 [Under development]
Methods for the calibration of vibration and shock transducers -- Part 44: Calibration of field vibration calibrators
40.99 ISO/TC 108
ISO 16063-45:2017
Methods for the calibration of vibration and shock transducers -- Part 45: In-situ calibration of transducers with built in calibration coil
60.60 ISO/TC 108
ISO 16587:2004
Mechanical vibration and shock -- Performance parameters for condition monitoring of structures
90.93 ISO/TC 108
ISO 17359:2003 [Withdrawn]
Condition monitoring and diagnostics of machines -- General guidelines
95.99 ISO/TC 108/SC 5
ISO 17359:2011
Condition monitoring and diagnostics of machines -- General guidelines
90.92 ISO/TC 108/SC 5
ISO/PRF 17359 [Under development]
Condition monitoring and diagnostics of machines -- General guidelines
50.00 ISO/TC 108/SC 5
ISO 18129:2015
Condition monitoring and diagnostics of machines -- Approaches for performance diagnosis
60.60 ISO/TC 108/SC 5
ISO 18312-1:2012
Mechanical vibration and shock -- Measurement of vibration power flow from machines into connected support structures -- Part 1: Direct method
90.93 ISO/TC 108
ISO 18312-2:2012
Mechanical vibration and shock -- Measurement of vibration power flow from machines into connected support structures -- Part 2: Indirect method
90.93 ISO/TC 108
ISO 18431-1:2005
Mechanical vibration and shock -- Signal processing -- Part 1: General introduction
90.93 ISO/TC 108
60.60 ISO/TC 108
ISO 18431-2:2004
Mechanical vibration and shock -- Signal processing -- Part 2: Time domain windows for Fourier Transform analysis
90.93 ISO/TC 108
60.60 ISO/TC 108
ISO 18431-3:2014
Mechanical vibration and shock -- Signal processing -- Part 3: Methods of time-frequency analysis
60.60 ISO/TC 108
ISO 18431-4:2007
Mechanical vibration and shock -- Signal processing -- Part 4: Shock-response spectrum analysis
90.93 ISO/TC 108
ISO 18434-1:2008
Condition monitoring and diagnostics of machines -- Thermography -- Part 1: General procedures
90.93 ISO/TC 108/SC 5
ISO 18434-1:2008/NP Amd 1 [Under development]
10.99 ISO/TC 108/SC 5
ISO 18436-1:2004 [Withdrawn]
Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 1: Requirements for certifying bodies and the certification process
95.99 ISO/TC 108/SC 5
95.99 ISO/TC 108/SC 5
ISO 18436-1:2012
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 1: Requirements for assessment bodies and the assessment process
90.93 ISO/TC 108/SC 5
ISO 18436-2:2003 [Withdrawn]
Condition monitoring and diagnostics of machines -- Requirements for training and certification of personnel -- Part 2: Vibration condition monitoring and diagnostics
95.99 ISO/TC 108/SC 5
ISO 18436-2:2014
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 2: Vibration condition monitoring and diagnostics
60.60 ISO/TC 108/SC 5
ISO 18436-3:2008 [Withdrawn]
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 3: Requirements for training bodies and the training process
95.99 ISO/TC 108/SC 5
95.99 ISO/TC 108/SC 5
ISO 18436-3:2012
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 3: Requirements for training bodies and the training process
60.60 ISO/TC 108/SC 5
ISO 18436-4:2008 [Withdrawn]
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis
95.99 ISO/TC 108/SC 5
ISO 18436-4:2014
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis
60.60 ISO/TC 108/SC 5
ISO 18436-5:2012
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 5: Lubricant laboratory technician/analyst
60.60 ISO/TC 108/SC 5
ISO 18436-6:2008 [Withdrawn]
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission
95.99 ISO/TC 108/SC 5
ISO 18436-6:2014
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission
60.60 ISO/TC 108/SC 5
ISO 18436-7:2008 [Withdrawn]
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 7: Thermography
95.99 ISO/TC 108/SC 5
ISO 18436-7:2014
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 7: Thermography
60.60 ISO/TC 108/SC 5
ISO 18436-8:2013
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 8: Ultrasound
60.60 ISO/TC 108/SC 5
ISO 18437-1:2012
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 1: Principles and guidelines
90.20 ISO/TC 108
ISO 18437-2:2005
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 2: Resonance method
90.93 ISO/TC 108
60.60 ISO/TC 108
ISO 18437-3:2005
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 3: Cantilever shear beam method
90.93 ISO/TC 108
60.60 ISO/TC 108
ISO 18437-4:2008
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 4: Dynamic stiffness method
90.93 ISO/TC 108
ISO 18437-5:2011
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 5: Poisson ratio based on comparison between measurements and finite element analysis
90.93 ISO/TC 108
ISO/PRF 18437-6 [Under development]
Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 6: Time-temperature superposition
50.00 ISO/TC 108
ISO 18649:2004
Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges
90.93 ISO/TC 108/SC 2
ISO/TR 19201:2013
Mechanical vibration -- Methodology for selecting appropriate machinery vibration standards
60.60 ISO/TC 108/SC 2
ISO/TR 19664:2017
Human response to vibration -- Guidance and terminology for instrumentation and equipment for the assessment of daily vibration exposure at the workplace according to the requirements of health and safety
60.60 ISO/TC 108
ISO 20283-5:2016
Mechanical vibration -- Measurement of vibration on ships -- Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
60.60 ISO/TC 108/SC 2
ISO 20816-1:2016
Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 1: General guidelines
60.60 ISO/TC 108/SC 2
ISO 20816-2:2017
Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
60.60 ISO/TC 108/SC 2
ISO/DIS 20816-5 [Under development]
Mechanical vibration -- Measurement and evaluation of machine vibration -- Part 5: Machine sets in hydraulic power generating and pump-storage plants
40.99 ISO/TC 108/SC 2
ISO 20958:2013
Condition monitoring and diagnostics of machine systems -- Electrical signature analysis of three-phase induction motors
60.60 ISO/TC 108/SC 5
ISO 21289:2008
Mechanical vibration and shock -- Parameters to be specified for the acquisition of vibration data
90.93 ISO/TC 108
ISO/DIS 21984 [Under development]
Ships and marine technology -- Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
40.60 ISO/TC 8/SC 8
ISO 22096:2007
Condition monitoring and diagnostics of machines -- Acoustic emission
90.93 ISO/TC 108/SC 5
ISO 22266-1:2009
Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
90.93 ISO/TC 108/SC 2
ISO/FDIS 22266-1 [Deleted]
Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
50.98 ISO/TC 108/SC 2
ISO/FDIS 29821 [Under development]
Condition monitoring and diagnostics of machines -- Ultrasound -- General guidelines, procedures and validation
50.00 ISO/TC 108/SC 5
ISO 29821-1:2011
Condition monitoring and diagnostics of machines -- Ultrasound -- Part 1: General guidelines
90.92 ISO/TC 108/SC 5
ISO 29821-2:2016
Condition monitoring and diagnostics of machines -- Ultrasound -- Part 2: Procedures and validation
90.92 ISO/TC 108/SC 5

No matching records found