Standards catalogue

17.120.10 - Flow in closed conduits

Gas supply systems, see 91.140.40
Water supply systems, see 91.140.60
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO/R 541:1967 [Withdrawn]
Withdrawal of ISO/R 541-1967
95.99 ISO/TC 30
ISO/R 781:1968 [Withdrawn]
Withdrawal of ISO/R 781-1968
95.99 ISO/TC 30
ISO 2186:1973 [Withdrawn]
Fluid flow in closed conduits -- Connections for pressure signal transmissions between primary and secondary elements
95.99 ISO/TC 30/SC 2
ISO 2186:2007
Fluid flow in closed conduits -- Connections for pressure signal transmissions between primary and secondary elements
90.93 ISO/TC 30/SC 2
ISO 2975-1:1974
Measurement of water flow in closed conduits -- Tracer methods -- Part 1: General
90.93 ISO/TC 30/SC 5
ISO 2975-2:1975
Measurement of water flow in closed conduits -- Tracer methods -- Part 2: Constant rate injection method using non-radioactive tracers
90.93 ISO/TC 30/SC 5
ISO 2975-3:1976
Measurement of water flow in closed conduits -- Tracer methods -- Part 3: Constant rate injection method using radioactive tracers
90.93 ISO/TC 30/SC 5
ISO 2975-6:1977
Measurement of water flow in closed conduits -- Tracer methods -- Part 6: Transit time method using non-radioactive tracers
90.93 ISO/TC 30/SC 5
ISO 2975-7:1977
Measurement of water flow in closed conduits -- Tracer methods -- Part 7: Transit time method using radioactive tracers
90.93 ISO/TC 30/SC 5
ISO/DTR 3313 [Under development]
Measurement of fluid flow in closed conduits -- Guidelines on the effects of flow pulsations on flow-measurement instruments
30.20 ISO/TC 30/SC 2
ISO/TR 3313:1974 [Withdrawn]
Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes, in particular in the case of sinusoidal or square wave intermittent periodic-type fluctuations
95.99 ISO/TC 30
ISO/TR 3313:1992 [Withdrawn]
Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes
95.99 ISO/TC 30/SC 2
ISO/TR 3313:1998 [Withdrawn]
Measurement of fluid flow in closed conduits -- Guidelines on the effects of flow pulsations on flow-measurement instruments
95.99 ISO/TC 30/SC 2
ISO 3354:1975 [Withdrawn]
Measurement of clean water flow in closed conduits -- Velocity-area method using current-meters
95.99 ISO/TC 30
ISO 3354:1988 [Withdrawn]
Measurement of clean water flow in closed conduits -- Velocity-area method using current-meters in full conduits and under regular flow conditions
95.99 ISO/TC 30/SC 5
ISO 3354:2008
Measurement of clean water flow in closed conduits -- Velocity-area method using current-meters in full conduits and under regular flow conditions
90.20 ISO/TC 30/SC 5
ISO 3966:1977 [Withdrawn]
Measurement of fluid flow in closed conduits -- Velocity area method using Pitot static tubes
95.99 ISO/TC 30/SC 5
ISO 3966:2008
Measurement of fluid flow in closed conduits -- Velocity area method using Pitot static tubes
90.20 ISO/TC 30/SC 5
ISO 4006:1977 [Withdrawn]
Measurement of fluid flow in closed conduits -- Vocabulary and symbols
95.99 ISO/TC 30
ISO 4006:1991
Measurement of fluid flow in closed conduits -- Vocabulary and symbols
90.93 ISO/TC 30
ISO 4053-1:1977 [Withdrawn]
Measurement of gas flow in conduits -- Tracer methods -- Part 1: General
95.99 ISO/TC 30/SC 5
ISO 4053-4:1978 [Withdrawn]
Measurement of gas flow in conduits -- Tracer methods -- Part 4: Transit time method using radioactive tracers
95.99 ISO/TC 30/SC 5
ISO 4185:1980
Measurement of liquid flow in closed conduits -- Weighing method
90.93 ISO/TC 30
60.60 ISO/TC 30
ISO 5167:1980 [Withdrawn]
Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
95.99 ISO/TC 30
ISO 5167-1:1991 [Withdrawn]
Measurement of fluid flow by means of pressure differential devices -- Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
95.99 ISO/TC 30/SC 2
95.99 ISO/TC 30/SC 2
ISO 5167-1:1991/Cor 1:1997 [Withdrawn]
(Applies to French version only)
95.99 ISO/TC 30/SC 2
ISO 5167-1:2003
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 1: General principles and requirements
90.93 ISO/TC 30/SC 2
ISO 5167-2:2003
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 2: Orifice plates
90.93 ISO/TC 30/SC 2
ISO 5167-3:2003
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 3: Nozzles and Venturi nozzles
90.93 ISO/TC 30/SC 2
ISO 5167-4:2003
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 4: Venturi tubes
90.93 ISO/TC 30/SC 2
ISO 5167-5:2016
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 5: Cone meters
60.60 ISO/TC 30/SC 2
ISO/CD 5167-6 [Under development]
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 6: Wedge meters
30.20 ISO/TC 30/SC 2
ISO 5168:1978 [Withdrawn]
Measurement of fluid flow -- Estimation of uncertainty of a flow-rate measurement
95.99 ISO/TC 30
ISO 5168:2005
Measurement of fluid flow -- Procedures for the evaluation of uncertainties
90.93 ISO/TC 30
ISO/TR 5168:1998 [Withdrawn]
Measurement of fluid flow -- Evaluation of uncertainties
95.99 ISO/TC 30
ISO 6817:1992
Measurement of conductive liquid flow in closed conduits -- Method using electromagnetic flowmeters
90.92 ISO/TC 30/SC 5
ISO/TR 6817:1980 [Withdrawn]
Measurement of conductive fluid flowrate in closed conduits -- Method using electromagnetic flowmeters
95.99 ISO/TC 30
ISO 7066-1:1989 [Withdrawn]
Assessment of uncertainty in the calibration and use of flow measurement devices -- Part 1: Linear calibration relationships
95.99 ISO/TC 30
ISO 7066-2:1988
Assessment of uncertainty in the calibration and use of flow measurement devices -- Part 2: Non-linear calibration relationships
90.93 ISO/TC 30
ISO 7145:1982 [Withdrawn]
Determination of flowrate of fluids in closed conduits of circular cross-section -- Method of velocity measurement at one point of the cross-section
95.99 ISO/TC 30/SC 5
ISO 7194:1983 [Withdrawn]
Measurement of fluid flow in closed conduits -- Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
95.99 ISO/TC 30/SC 5
ISO 7194:2008
Measurement of fluid flow in closed conduits -- Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
90.20 ISO/TC 30/SC 5
ISO 8316:1987
Measurement of liquid flow in closed conduits -- Method by collection of the liquid in a volumetric tank
90.93 ISO/TC 30
ISO 9104:1991
Measurement of fluid flow in closed conduits -- Methods of evaluating the performance of electromagnetic flow-meters for liquids
90.92 ISO/TC 30/SC 5
ISO 9300:1990 [Withdrawn]
Measurement of gas flow by means of critical flow Venturi nozzles
95.99 ISO/TC 30/SC 2
ISO 9300:2005
Measurement of gas flow by means of critical flow Venturi nozzles
90.93 ISO/TC 30/SC 2
ISO 9368-1:1990
Measurement of liquid flow in closed conduits by the weighing method -- Procedures for checking installations -- Part 1: Static weighing systems
90.93 ISO/TC 30
ISO/TR 9464:1998 [Withdrawn]
Guidelines for the use of ISO 5167-1:1991
95.99 ISO/TC 30/SC 2
ISO/TR 9464:2008
Guidelines for the use of ISO 5167:2003
90.93 ISO/TC 30/SC 2
ISO/TR 9824:2007
Hydrometry -- Measurement of free surface flow in closed conduits
60.60 ISO/TC 113/SC 1
ISO/TR 9824-1:1990 [Withdrawn]
Measurement of free surface flow in closed conduits -- Part 1: Methods
95.99 ISO/TC 113/SC 1
ISO/TR 9824-2:1990 [Withdrawn]
Measurement of free surface flow in closed conduits -- Part 2: Equipment
95.99 ISO/TC 113/SC 5
ISO 9951:1993
Measurement of gas flow in closed conduits -- Turbine meters
90.93 ISO/TC 30
60.60 ISO/TC 30
ISO 10790:1994 [Withdrawn]
Measurement of fluid flow in closed conduits -- Coriolis mass flowmeters
95.99 ISO/TC 30/SC 5
ISO 10790:1999 [Withdrawn]
Measurement of fluid flow in closed conduits -- Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
95.99 ISO/TC 30/SC 5
ISO 10790:1999/Amd 1:2003 [Withdrawn]
Guidelines for gas measurement
95.99 ISO/TC 30/SC 5
ISO 10790:2015
Measurement of fluid flow in closed conduits -- Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
60.60 ISO/TC 30/SC 5
ISO/TR 11583:2012
Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
60.60 ISO/TC 30/SC 2
ISO 11631:1998
Measurement of fluid flow -- Methods of specifying flowmeter performance
90.93 ISO/TC 30
ISO/NP 11631 [Under development]
Measurement of fluid flow -- Methods of specifying flowmeter performance
10.99 ISO/TC 30
ISO 12242:2012
Measurement of fluid flow in closed conduits -- Ultrasonic transit-time meters for liquid
60.60 ISO/TC 30/SC 5
ISO/DIS 12764 [Under development]
Measurement of fluid flow in closed conduits -- Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
40.60 ISO/TC 30/SC 5
ISO/TR 12764:1997 [Withdrawn]
Measurement of fluid flow in closed conduits -- Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
95.99 ISO/TC 30/SC 5
ISO/TR 12765:1998 [Withdrawn]
Measurement of fluid flow in closed conduits -- Methods using transit-time ultrasonic flowmeters
95.99 ISO/TC 30/SC 5
ISO/TR 12767:1998 [Withdrawn]
Measurement of fluid flow by means of pressure-differential devices -- Guidelines to the effect of departure from the specifications and operating conditions given in ISO 5167-1
95.99 ISO/TC 30/SC 2
ISO/TR 12767:2007
Measurement of fluid flow by means of pressure differential devices -- Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
90.93 ISO/TC 30/SC 2
ISO 13359:1998
Measurement of conductive liquid flow in closed conduits -- Flanged electromagnetic flowmeters -- Overall length
90.92 ISO/TC 30/SC 5
ISO 14164:1999
Stationary source emissions -- Determination of the volume flowrate of gas streams in ducts -- Automated method
90.93 ISO/TC 146/SC 1
ISO 14511:2001
Measurement of fluid flow in closed conduits -- Thermal mass flowmeters
90.93 ISO/TC 30/SC 5
ISO/DTR 15377 [Under development]
Measurement of fluid flow by means of pressure-differential devices -- Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
30.20 ISO/TC 30/SC 2
ISO/TR 15377:1998 [Withdrawn]
Measurement of fluid flow by means of pressure-differential devices -- Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1
95.99 ISO/TC 30/SC 2
95.99 ISO/TC 30/SC 2
ISO/TR 15377:2007
Measurement of fluid flow by means of pressure-differential devices -- Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
90.92 ISO/TC 30/SC 2
ISO 17089-1:2010
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas -- Part 1: Meters for custody transfer and allocation measurement
90.92 ISO/TC 30/SC 5
ISO/WD 17089-1 [Under development]
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas -- Part 1: Meters for custody transfer and allocation measurement
20.20 ISO/TC 30/SC 5
ISO 17089-2:2012
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas -- Part 2: Meters for industrial applications
60.60 ISO/TC 30/SC 5
ISO/DIS 20456 [Under development]
Measurement of fluid flow in closed conduits -- Guidance for the use of electromagnetic flowmeters for conductive liquids
40.60 ISO/TC 30/SC 5

No matching records found