Standards catalogue

17.040.30 - Measuring instruments

  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project Stage TC
ISO 463:2006
Geometrical Product Specifications (GPS) -- Dimensional measuring equipment -- Design and metrological characteristics of mechanical dial gauges
90.93 ISO/TC 213
60.60 ISO/TC 213
60.60 ISO/TC 213
ISO/R 463:1965 [Withdrawn]
Dial gauges reading in 0.01 mm, 0.001 in and 0.0001 in
95.99 ISO/TC 213
ISO 1502:1978 [Withdrawn]
ISO general purpose metric screw threads -- Gauging
95.99 ISO/TC 1
ISO 1502:1996
ISO general-purpose metric screw threads -- Gauges and gauging
90.93 ISO/TC 1
ISO 1878:1983 [Withdrawn]
Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
95.99 ISO/TC 213
ISO 1879:1981 [Withdrawn]
Instruments for the measurement of surface roughness by the profile method -- Vocabulary
95.99 ISO/TC 213
ISO 1880:1979 [Withdrawn]
Instruments for the measurement of surface roughness by the profile method -- Contact (stylus) instruments of progressive profile transformation -- Profile recording instruments
95.99 ISO/TC 213
ISO 2632-1:1975 [Withdrawn]
Roughness comparison specimens -- Part 1: Turned, ground, bored, milled, shaped and planed
95.99 ISO/TC 213
ISO 2632-1:1985 [Withdrawn]
Roughness comparison specimens -- Part 1: Turned, ground, bored, milled, shaped and planed
95.99 ISO/TC 213
ISO 2632-2:1977 [Withdrawn]
Roughness comparison specimens -- Part 2: Spark-eroded, shot blasted and grit blasted, and polished
95.99 ISO/TC 213
ISO 2632-2:1985 [Withdrawn]
Roughness comparison specimens -- Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished
95.99 ISO/TC 213
ISO 2632-3:1979 [Withdrawn]
Roughness comparison specimens -- Part 3: Cast surfaces
95.99 ISO/TC 213
ISO 3274:1975 [Withdrawn]
Instruments for the measurement of surface roughness by the profile method -- Contact (stylus) instruments of consecutive profile transformation -- Contact profile meters, system M
95.99 ISO/TC 213
ISO 3274:1996
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments
90.20 ISO/TC 213
60.60 ISO/TC 213
ISO 3599:1976 [Withdrawn]
Vernier callipers reading to 0,1 and 0,05 mm
95.99 ISO/TC 213
ISO 3611:1978 [Withdrawn]
Micrometer callipers for external measurement
95.99 ISO/TC 213
ISO 3611:2010
Geometrical product specifications (GPS) -- Dimensional measuring equipment: Micrometers for external measurements -- Design and metrological characteristics
90.93 ISO/TC 213
ISO 3650:1978 [Withdrawn]
Gauge blocks
95.99 ISO/TC 213
ISO 3650:1998
Geometrical Product Specifications (GPS) -- Length standards -- Gauge blocks
90.93 ISO/TC 213
60.60 ISO/TC 213
ISO 3670:1979 [Withdrawn]
Blanks for plug gauges and handles (taper lock and trilock) and ring gauges -- Design and general dimensions
95.99 ISO/TC 213
ISO 5436-1:2000
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures
90.92 ISO/TC 213
ISO 5436-2:2001 [Withdrawn]
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 2: Software measurement standards
95.99 ISO/TC 213
95.99 ISO/TC 213
95.99 ISO/TC 213
ISO 5436-2:2012
Geometrical product specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 2: Software measurement standards
90.20 ISO/TC 213
ISO 6906:1984 [Withdrawn]
Vernier callipers reading to 0,02 mm
95.99 ISO/TC 213
ISO 7863:1984
Height setting micrometers and riser blocks
90.93 ISO/TC 213
ISO 8322-2:1989 [Withdrawn]
Building construction -- Measuring instruments -- Procedures for determining accuracy in use -- Part 2: Measuring tapes
95.99 ISO/TC 172/SC 6
ISO 8322-7:1991 [Withdrawn]
Building construction -- Measuring instruments -- Procedures for determining accuracy in use -- Part 7: Instruments when used for setting out
95.99 ISO/TC 172/SC 6
ISO 8322-8:1992 [Withdrawn]
Building construction -- Measuring instruments -- Procedures for determining accuracy in use -- Part 8: Electronic distance-measuring instruments up to 150 m
95.99 ISO/TC 172/SC 6
ISO 8322-10:1995 [Withdrawn]
Building construction -- Measuring instruments -- Procedures for determining accuracy in use -- Part 10: Difference between non-glass reflectors and electronic distance-measuring prisms (traditional glass prisms) for distances up to 150 m
95.99 ISO/TC 172/SC 6
ISO 8512-1:1990
Surface plates -- Part 1: Cast iron
90.93 ISO/TC 213
ISO 8512-2:1990
Surface plates -- Part 2: Granite
90.93 ISO/TC 213
ISO 9493:2010
Geometrical product specifications (GPS) -- Dimensional measuring equipment: Dial test indicators (lever type) -- Design and metrological characteristics
90.93 ISO/TC 213
ISO 10360-1:2000
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary
90.93 ISO/TC 213
60.60 ISO/TC 213
ISO 10360-2:1994 [Withdrawn]
Coordinate metrology -- Part 2: Performance assessment of coordinate measuring machines
95.99 ISO/TC 213
ISO 10360-2:2001 [Withdrawn]
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring size
95.99 ISO/TC 213
ISO 10360-2:2009
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions
90.93 ISO/TC 213
ISO 10360-3:2000
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMMs with the axis of a rotary table as the fourth axis
90.93 ISO/TC 213
ISO 10360-4:2000
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 4: CMMs used in scanning measuring mode
90.93 ISO/TC 213
60.60 ISO/TC 213
ISO 10360-5:2000 [Withdrawn]
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using multiple-stylus probing systems
95.99 ISO/TC 213
ISO 10360-5:2010
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using single and multiple stylus contacting probing systems
90.92 ISO/TC 213
ISO/CD 10360-5 [Under development]
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using single and multiple stylus contacting probing systems
30.60 ISO/TC 213
ISO 10360-6:2001
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features
90.93 ISO/TC 213
60.60 ISO/TC 213
ISO 10360-7:2011
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 7: CMMs equipped with imaging probing systems
90.93 ISO/TC 213
ISO 10360-8:2013
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 8: CMMs with optical distance sensors
60.60 ISO/TC 213
ISO 10360-9:2013
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 9: CMMs with multiple probing systems
60.60 ISO/TC 213
ISO 10360-10:2016
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 10: Laser trackers for measuring point-to-point distances
60.60 ISO/TC 213
ISO 10360-12:2016
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 12: Articulated arm coordinate measurement machines (CMM)
60.60 ISO/TC 213
ISO 12179:2000
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
90.92 ISO/TC 213
60.60 ISO/TC 213
ISO/NP 12179 [Under development]
Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments
10.99 ISO/TC 213
ISO/PAS 12868:2009 [Withdrawn]
Geometrical product specification (GPS) -- Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
95.99 ISO/TC 213
ISO 13102:2012
Geometrical product specifications (GPS) -- Dimensional measuring equipment: Electronic digital-indicator gauge -- Design and metrological characteristics
90.20 ISO/TC 213
ISO 13225:2012
Geometrical product specifications (GPS) -- Dimensional measuring equipment; Height gauges -- Design and metrological characteristics
90.60 ISO/TC 213
ISO 13385-1:2011
Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Callipers; Design and metrological characteristics
90.92 ISO/TC 213
ISO/DIS 13385-1 [Under development]
Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Desiign and metrological characteristics of callipers
40.20 ISO/TC 213
ISO 13385-2:2011
Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Calliper depth gauges; Design and metrological characteristics
90.93 ISO/TC 213
ISO 14978:2006
Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment
90.92 ISO/TC 213
60.60 ISO/TC 213
ISO/DIS 14978 [Under development]
Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment
40.60 ISO/TC 213
ISO/TS 15530-1:2013
Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 1: Overview and metrological characteristics
90.93 ISO/TC 213
ISO 15530-3:2011
Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards
90.93 ISO/TC 213
ISO/TS 15530-3:2004 [Withdrawn]
Geometrical Product Specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or standards
95.99 ISO/TC 213
ISO/CD 15530-4 [Under development]
Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 4: Evaluating task-specific measurement uncertainty using simulation
30.99 ISO/TC 213
ISO/TS 15530-4:2008
Geometrical Product Specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 4: Evaluating task-specific measurement uncertainty using simulation
90.92 ISO/TC 213
ISO 16239:2013
Metric series wires for measuring screw threads
60.60 ISO/TC 1

No matching records found