ISO/DIS 3651-3

No disponible en español

En desarrollo

Este borrador de Norma Internacional se encuentra en la fase de consultas con los miembros de ISO.

Reemplazará ISO 3651-3:2017

ISO/DIS 3651-3

CHF 67

Convertir Franco suizo (CHF) a tu moneda

Resumen

ISO 3651-3:2017 specifies the determination of the intergranular corrosion susceptibility of low-Cr [less than 16 % Cr, less than 0,3 % Ni, less than 0,3 % Ti and less than 0,3 % Nb, less than 0,3 % (Ti + Atomic weight ratio Nb)] ferritic stainless steels in the 0,5 % sulfuric acid/copper sulfate test. It also specifies the purposes which may be assigned to the test.

The method is applicable to stainless steels supplied in the form of rolled sheets and welded tubes and intended for use in a mildly oxidizing acid medium.

It is important to note that the result of the corrosion test is only strictly valid for the corrosive medium used in the test. It constitutes a basis for estimating the resistance to intergranular corrosion but cannot be used to check resistance to other forms of corrosion (general corrosion, pitting, stress corrosion, etc.). It is important for the user to adapt the specified corrosion test where steels are used. This test is, in no case, considered as an absolute criterion of the quality of the metal.

Informaciones generales

Estado
: En desarrollo

Etapa
: Informe completo distribuido: DIS aprobado para su registro como FDIS [40.99]
Edición
: 2

Número de páginas
: 8
Comité Técnico :
ISO/TC 156

ICS :
77.060
RSS actualizaciones