Files and rasps — Part 1: Dimensions

Files and rasps — Part 2: Characteristics of cut

Withdrawal of ISO 234-1975

Withdrawal of ISO 235/1-1975

Withdrawal of ISO 235/2-1972

Long fluted machine reamers, Morse taper shanks

Reduction sleeves and extension sockets for tools with Morse taper shanks

Drill chuck tapers

Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels — Metric series and inch series

Milling cutters — Recommended range of outside diameters

Withdrawal of ISO/R 524-1966

Bonded abrasive products — General features — Designation, ranges of dimensions, and profiles

Short machine taps and hand taps

Short machine taps and hand taps — Amendment 1

Short machine taps and hand taps — Amendment 2

Machine tools — Mounting of plain grinding wheels by means of hub flanges

Milling machine arbors with 7/24 tapers — Part 1: Dimensions

Indexable (throwaway) carbide inserts without fixation hole — Dimensions

Combinations of double-ended wrench gaps

Assembly tools for bolts and screws — Hexagon drive ends for power tools

Assembly tools for bolts and screws — Driving squares for power socket wrenches and hand socket wrenches — Amendment 1

Shanks for pneumatic tools and fitting dimensions of chuck bushings

Shanks for pneumatic tools and fitting dimensions of chuck bushings — Addendum 1

Withdrawal of ISO/R 1571-1970

End mills and slot drills — Part 1: Milling cutters with parallel shanks

End mills and slot drills — Part 3: Milling cutters with 7/24 taper shanks

Tube drawing mandrels

Tube drawing mandrels — Amendment 1

Wire, bar and tube drawing dies — Specifications

Wire, bar and tube drawing dies — Specifications — Amendment 2

Hand operated wrenches and sockets — Technical specifications — Amendment 1

Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions

Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in

Long shank machine taps with nominal diameters from 3 to 24 mm and 1/8 to 1 in — Amendment 1

Hand taps for pipe threads for parallel and taper threads — General dimensions and marking

Withdrawal of ISO 2324-1972

Hacksaw blades — Part 1: Dimensions for hand blades

Hacksaw blades — Part 2: Dimensions for machine blades

Hand and machine hacksaw blades — Dimensions for lengths up to 450 mm and pitches up to 6,3 mm

Screwdriver bits, for slotted head screws, with male hexagon drive

Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances

Truncated cone abrasive sleeves — Designation — Dimensions — Tolerances — Addendum 1

Hand- and machine-operated circular screwing dies and hand-operated die stocks

Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 1

Hand- and machine-operated circular screwing dies and hand-operated die stocks — Amendment 2

Tool shanks and equipment with 7/24 tapers — Collar dimensions

Shell end mills with plain bore and tenon drive — Metric series

Assembly tools for screws and nuts — Power and hand operated square drive sockets — Metric series

Woodworking tools — Metal bodied planes

Woodworking tools — Plane irons

Woodworking tools — Chisels and gouges

Woodworking tools — Chisels and gouges

Woodworking tools — Wooden bodied planes

Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series

Milling cutters with tenon drive — Interchangeability dimensions with cutter arbors — Metric series

Wire, bar or tube drawing dies — As sintered pellets of hard metal (carbide) — Dimensions

Wire, bar or tube drawing dies — As-sintered pellets of hardmetal (carbide) — Dimensions

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers

Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1

Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles

Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting

Basic quantities in cutting and grinding — Part 4: Forces, energy, power

Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels

Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws

Extra long Morse taper shank twist drills

Extra long parallel shank twist drills

Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Torque testing

Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Torque testing

Assembly tools for screws and nuts — Open-end double-head engineers' wrenches, double-head box wrenches and combination wrenches — Maximum widths of heads

T-slot cutters with plain or flatted parallel shanks and with Morse taper shanks having tapped hole — Metric series

Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks

Parallel shanks for milling cutters — Part 1: Dimensional characteristics of plain parallel shanks

Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks

Parallel shanks for milling cutters — Part 2: Dimensional characteristics of flatted parallel shanks

Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks

Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks

Cylindrical shanks for milling cutters — Part 2: Dimensional characteristics of flatted cylindrical shanks

Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions

Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts

Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts

Subland twist drills with Morse taper shanks for holes prior to tapping screw threads

Subland twist drills with parallel shanks for holes prior to tapping screw threads

Tool-life testing with single-point turning tools

Inverse dovetail cutters and dovetail cutters with parallel shanks

Inverse dovetail cutters and dovetail cutters with parallel shanks

Coated abrasives — Flap wheels with shafts — Designation and dimensions

Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions

Cutter arbors with tenon drive — Dimensions

Cutter arbors with tenon drive — Dimensions

Reduction sleeves with external 7/24 taper for tools with Morse taper shanks

Countersinks, 90 degrees, with parallel shanks and solid pilot

Counterbores with parallel shanks and solid pilots

Hand- and machine-operated circular screwing dies for taper pipe threads — R series

Hand- and machine-operated circular screwing dies for parallel pipe threads — G series

Jig bushes and accessories for drilling purposes — Dimensions

Metal cutting band saw blades — Part 3: Characteristics relating to each type of blade

Machine tools — Positive drive of Morse tapers

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks

Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks

Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw

Rotary percussive masonry drills with hardmetal tips — Dimensions

Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions

Turning and copying tool holders and cartridges for indexable (throwaway) inserts — Designation

Cartridges, type A, for indexable inserts — Dimensions

Pliers and nippers — Nomenclature — Addendum 1

Pliers and nippers — General technical requirements

Pliers and nippers — Methods of test

Pliers and nippers — Pliers for gripping and manipulating — Dimensions

Pliers and nippers — Engineer's and lineman's pliers — Dimensions

Pliers and nippers — Lever assisted side cutting pliers, end and diagonal cutting nippers — Dimensions

Pliers and nippers — End cutting nippers — Dimensions

Pliers and nippers — End cutting nippers — Dimensions — Addendum 1

Pliers and nippers — Diagonal cutting nippers — Dimensions

Pliers and nippers — Diagonal cutting nippers — Dimensions — Addendum 1

Ejector pins with cylindrical head — Basic dimensions

Dimensions of hexagonal dienuts

Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF

Long shank taps with nominal diameters from M3 to M10 — Taps with reinforced shank and recess

7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses

Cutter arbors with parallel key and tenon drive — Part 1: General dimensions

Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface

Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers

Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers

Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

Tool holders with cylindrical shank — Part 7: Type F with taper seat

Tool holders with cylindrical shank — Part 7: Type F with taper seat

Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts

Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools

Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Amendment 1

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 2

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items

Cutting tool data representation and exchange — Part 6: Assembly of cutting tool components

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems

Cutting tool data representation and exchange — Part 61: Company codes

Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout

Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information

Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange

Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles

Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles

Cutting tool data representation and exchange — Part 90: Package structure with reference file for exchange of product data and documents

Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries

Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries

Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries — Technical Corrigendum 1

Cutting tool data representation and exchange — Part 150: Usage guidelines

Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts

Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts

Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling

Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming

Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies

Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools

Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills

Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole

Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring

Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts

Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts

Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts

Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts

Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips

Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers

Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts

Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs

Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts

Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools

Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items

Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units

Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets

Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface

Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions

Balancing of rotating tools and tool systems

Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks

Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks

Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks

Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers