Standards catalogue

ISO/TC 59

Buildings and civil engineering works

Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 59/SC 2 Terminology and harmonization of languages 7 0
ISO/TC 59/SC 8 Sealants 29 5
ISO/TC 59/SC 13 Organization of information about construction works 9 6
ISO/TC 59/SC 14 Design life 10 0
ISO/TC 59/SC 15 Framework for the description of housing performance 8 0
ISO/TC 59/SC 16 Accessibility and usability of the built environment 1 1
ISO/TC 59/SC 17 Sustainability in buildings and civil engineering works 9 6
ISO/TC 59/SC 18 Construction procurement 8 2
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 59 Secretariat Stage ICS
ISO 1006:1983
Building construction -- Modular coordination -- Basic module
90.92
ISO 1040:1983
Building construction -- Modular coordination -- Multimodules for horizontal coordinating dimensions
90.92
ISO 1789:1973 [Withdrawn]
Withdrawal of ISO 1789-1973
95.99
ISO/R 1790:1970 [Withdrawn]
Modular co-ordination -- Reference lines of horizontal controlling co-ordinating dimensions
95.99
ISO 1803:1973 [Withdrawn]
Tolerances for building -- Vocabulary
95.99
ISO 1803-1:1985 [Withdrawn]
Building construction -- Tolerances -- Vocabulary -- Part 1: General terms
95.99
ISO 1803-2:1986 [Withdrawn]
Building construction -- Tolerances -- Vocabulary -- Part 2: Derived terms
95.99
ISO 2444:1974 [Withdrawn]
Joints in building -- Vocabulary
95.99
ISO 2445:1972
Joints in building -- Fundamental principles for design
90.93
ISO 2776:1974 [Withdrawn]
Modular co-ordination -- Co-ordinating sizes for doorsets -- External and internal
95.99
ISO 2777:1974 [Withdrawn]
Modular co-ordination -- Co-ordinating sizes for rigid flat sheet boards used in building
95.99
ISO 2848:1974 [Withdrawn]
Modular co-ordination -- Principles and rules
95.99
ISO 2848:1984
Building construction -- Modular coordination -- Principles and rules
90.93
ISO 3055:1974 [Withdrawn]
Kitchen equipment -- Co-ordinating sizes
95.99
ISO 3443-1:1979
Tolerances for building -- Part 1: Basic principles for evaluation and specification
90.93
ISO 3443-2:1979
Tolerances for building -- Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes
90.93
ISO 3443-3:1987
Tolerances for building -- Part 3: Procedures for selecting target size and predicting fit
90.93
ISO 3443-4:1986
Tolerances for building -- Part 4: Method for predicting deviations of assemblies and for allocation of tolerances
90.93
ISO 3443-5:1982
Building construction -- Tolerances for building -- Part 5: Series of values to be used for specification of tolerances
90.93
ISO 3443-6:1986
Tolerances for building -- Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 1
90.93
ISO 3443-7:1988
Tolerances for building -- Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 2 (Statistical control method)
90.93
ISO 3443-8:1989
Tolerances for building -- Part 8: Dimensional inspection and control of construction work
90.93
ISO 3447:1975
Joints in building -- General check-list of joint functions
90.93
ISO 3881:1977
Building construction -- Modular co-ordination -- Stairs and stair openings -- Co-ordinating dimensions
90.93
ISO 4463:1979 [Withdrawn]
Measurement methods for building -- Setting out and measurement -- Permissible measuring deviations
95.99
ISO 4463-1:1989
Measurement methods for building -- Setting-out and measurement -- Part 1: Planning and organization, measuring procedures, acceptance criteria
90.93
ISO 4463-2:1995
Measurement methods for building -- Setting-out and measurement -- Part 2: Measuring stations and targets
90.93
ISO 4463-3:1995
Measurement methods for building -- Setting-out and measurement -- Part 3: Check-lists for the procurement of surveys and measurement services
90.93
ISO 4464:1980 [Withdrawn]
Tolerances for building -- Relationship between the different types of deviations and tolerances used for specification
95.99
ISO 6240:1980 [Withdrawn]
Performance standards in building -- Contents and presentation
95.99
ISO 6241:1984 [Withdrawn]
Performance standards in building -- Principles for their preparation and factors to be considered
95.99
ISO 6511:1982
Building construction -- Modular coordination -- Modular floor plane for vertical dimensions
90.93
ISO 6512:1982
Building construction -- Modular coordination -- Storey heights and room heights
90.92
ISO 6513:1982
Building construction -- Modular coordination -- Series of preferred multimodular sizes for horizontal dimensions
90.92
ISO 6514:1982
Building construction -- Modular coordination -- Sub-modular increments
90.92
ISO 6589:1983
Joints in building -- Laboratory method of test for air permeability of joints
90.93
ISO 7077:1981
Measuring methods for building -- General principles and procedures for the verification of dimensional compliance
90.93
ISO 7162:1992 [Withdrawn]
Performance standards in building -- Contents and format of standards for evaluation of performance
95.99
ISO 7361:1986
Performance standards in building -- Presentation of performance levels of facades made of same-source components
90.93
ISO 7390:1982 [Withdrawn]
Building construction -- Jointing products -- Determination of resistance to flow
95.99
ISO 7727:1984
Joints in building -- Principles for jointing of building components -- Accommodation of dimensional deviations during construction
90.93
ISO 7728:1985
Typical horizontal joints between an external wall of prefabricated ordinary concrete components and a concrete floor -- Properties. characteristics and classification criteria
90.93
ISO 7729:1985
Typical vertical joints between two prefabricated ordinary concrete external wall components -- Properties, characteristics and classification criteria
90.93
ISO 7737:1986
Tolerances for building -- Presentation of dimensional accuracy data
90.93
ISO 7844:1985
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete panels -- Laboratory mechanical tests -- Effect of tangential loading
90.93
ISO 7845:1985
Horizontal joints between load-bearing walls and concrete floors -- Laboratory mechanical tests -- Effect of vertical loading and of moments transmitted by the floors
90.93
ISO 7892:1988
Vertical building elements -- Impact resistance tests -- Impact bodies and general test procedures
90.20
ISO 7894:1987 [Withdrawn]
Partitions made of components -- Test for resistance to wind (static pressure and slamming doors)
95.99
ISO 7895:1987 [Withdrawn]
Facades made of components -- Tests for resistance to positive and negative static pressure generated by wind
95.99
ISO 7976-1:1989
Tolerances for building -- Methods of measurement of buildings and building products -- Part 1: Methods and instruments
90.93
ISO 7976-2:1989
Tolerances for building -- Methods of measurement of buildings and building products -- Part 2: Position of measuring points
90.93
ISO/TR 8389:1984 [Withdrawn]
Building construction -- Modular coordination -- System of preferred numbers defining multimodular sizes
95.99
ISO/TR 8390:1984 [Withdrawn]
Building construction -- Modular coordination -- Application of horizontal multimodules
95.99
ISO/TR 9527:1994 [Withdrawn]
Building construction -- Needs of disabled people in buildings -- Design guidelines
95.99
ISO 9699:1994 [Withdrawn]
Performance standards in building -- Checklist for briefing -- Contents of brief for building design
95.99
ISO 9836:1992 [Withdrawn]
Performance standards in building -- Definition and calculation of area and space indicators
95.99
ISO 9882:1993
Performance standards in building -- Performance test for precast concrete floors -- Behaviour under non-concentrated load
90.93
ISO 9883:1993
Performance standards in building -- Performance test for precast concrete floors -- Behaviour under concentrated load
90.93
ISO/WD 21723 [Under development]
Buildings and civil engineering works -- Modular coordination -- Module
20.20
ISO/WD TR 22845 [Under development]
Resilience of buildings and civil engineering works
20.20

No matching records found