Standards catalogue

ISO/TC 39

Machine tools

Subcommittee Subcommittee Title Published standards Standards under development
ISO/TC 39/SC 2 Test conditions for metal cutting machine tools 68 13
ISO/TC 39/SC 4 Woodworking machines 23 12
ISO/TC 39/SC 6 Noise of machine tools 3 3
ISO/TC 39/SC 8 Work holding spindles and chucks 11 0
ISO/TC 39/SC 10 Safety 6 6
  • Filter:
  •  
  •  
  •  
  •  
Standard and/or project under the direct responsibility of ISO/TC 39 Secretariat Stage ICS
ISO 213:1982 [Withdrawn]
Machine tools -- Lathe tool posts -- Overall internal height
95.99
ISO 229:1973
Machine tools -- Speeds and feeds
90.60
ISO/R 230:1961 [Withdrawn]
Machine tool test code
95.99
ISO 296:1974 [Withdrawn]
Machine tools -- Self-holding tapers for tool shanks
95.99
ISO 297:1982 [Withdrawn]
7/24 tapers for tool shanks for manual changing
95.99
ISO 298:1973
Machine tools -- Lathe centres -- Sizes for interchangeability
90.60
ISO 299:1973 [Withdrawn]
Machine tool tables -- T-slots and corresponding bolts
95.99
ISO 299:1987
Machine tool tables -- T-slots and corresponding bolts
90.60
ISO 369:2009
Machine tools -- Symbols for indications appearing on machine tools
90.93
ISO/R 369:1964 [Withdrawn]
Symbols for indications appearing on machine tools
95.99
ISO 447:1973 [Withdrawn]
Machine tools -- Direction of operation of controls
95.99
ISO 447:1984
Machine tools -- Direction of operation of controls
90.93
ISO 702-1:1975 [Withdrawn]
Machine tools -- Spindle noses and face plates -- Sizes for interchangeability -- Part 1: Type A
95.99
ISO/R 867:1968 [Withdrawn]
Withdrawal of ISO/R 867-1968
95.99
ISO 1701:1974/Add 1:1978 [Withdrawn]
Annex -- Universal milling machines with a swivelling table
95.99
95.99
ISO 1985:1974 [Withdrawn]
Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table -- Testing of accuracy
95.99
ISO 1986:1974 [Withdrawn]
Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table -- Testing of accuracy
95.99
ISO 2407:1973 [Withdrawn]
Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of accuracy
95.99
95.99
ISO 2433:1973 [Withdrawn]
Test conditions for external cylindrical grinding machines with a movable table -- Testing of accuracy
95.99
ISO 2562:1973
Modular units for machine tool construction -- Slide units
90.93
60.60
ISO 2727:1973
Modular units for machine tool construction -- Headstocks
90.60
ISO 2769:1973
Modular units for machine tool construction -- Wing bases for slide units
90.60
ISO 2891:1977
Modular units for machine tool construction -- Centre bases and columns
90.60
ISO 2905:1974 [Withdrawn]
Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi-spindle heads
95.99
ISO 2905:1985
Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi-spindle heads
90.60
ISO 2912:1973
Modular units for machine tool construction -- Multi-spindle heads -- Casing and input drive shaft dimensions
90.93
60.60
ISO 2934:1973
Modular units for machine tool construction -- Wing base for columns
90.60
ISO 3070-1:1975 [Withdrawn]
Test conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 1: Table type machines
95.99
95.99
ISO 3070-2:1978 [Withdrawn]
Test conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 2: Floor type machines
95.99
ISO 3371:1975
Modular units for machine tool construction -- Rotary tables and multi-sided centre bases for rotary tables
90.93
ISO 3408:1975 [Withdrawn]
Ball screws -- Nominal diameters and basic leads -- Metric and inch series
95.99
ISO 3408-1:1991 [Withdrawn]
Ball screws -- Part 1: Vocabulary and designation
95.99
ISO 3408-1:2006
Ball screws -- Part 1: Vocabulary and designation
90.93
ISO 3408-2:1991
Ball screws -- Part 2: Nominal diameters and nominal leads -- Metric series
90.93
ISO 3408-3:1992 [Withdrawn]
Ball screws -- Part 3: Acceptance conditions and acceptance tests
95.99
ISO 3408-3:2006
Ball screws -- Part 3: Acceptance conditions and acceptance tests
90.93
ISO 3408-4:2006
Ball screws -- Part 4: Static axial rigidity
90.93
ISO 3408-5:2006
Ball screws -- Part 5: Static and dynamic axial load ratings and operational life
90.93
ISO 3442:1975 [Withdrawn]
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) -- Sizes for interchangeability and acceptance test specifications
95.99
ISO 3476:1975
Modular units for machine tool construction -- Tenon drive and flanges for mounting multi- spindle heads
90.60
ISO 3589:1975
Modular units for machine tool construction -- Integral way columns
90.60
60.60
ISO 3590:1976
Modular units for machine tool construction -- Spindle units
90.93
ISO 3610:1976
Modular units for machine tool construction -- Support brackets
90.93
ISO 3655-0:1976 [Withdrawn]
Test conditions for vertical turning and boring lathes with one or two columns -- Testing of the accuracy -- Part 0: General introduction
95.99
ISO 3655-1:1976 [Withdrawn]
Test conditions for vertical turning and boring lathes with one or two columns -- Testing of the accuracy -- Part 1: Lathes with a single fixed or movable table
95.99
ISO 3875:1980 [Withdrawn]
Conditions of acceptance for external cylindrical centreless grinding machines -- Testing of the accuracy
95.99
ISO 3970:1977
Modular units for machine tool construction -- Integral way columns -- Floor-mounted type
90.60
60.60
ISO 4703:1977 [Withdrawn]
Test conditions for surface grinding machines with two columns -- Machines for grinding slideways -- Testing of accuracy
95.99
ISO 5169:1977
Machine tools -- Presentation of lubrication instructions
90.93
ISO 5170:1977
Machine tools -- Lubrication systems
90.93
ISO 5734:1978 [Withdrawn]
Test conditions of mechanical dividing heads for machine tools -- Testing of the accuracy
95.99
ISO 6898:1984
Open front mechanical power presses -- Capacity ratings and dimensions
90.93
ISO 6899:1984
Acceptance conditions of open front mechanical power presses -- Testing of the accuracy
90.93
ISO 8526-1:1990
Modular units for machine tools -- Workholding pallets -- Part 1: Workholding pallets up to 800 mm nominal size
90.93
ISO 8526-2:1990
Modular units for machine tools -- Workholding pallets -- Part 2: Workholding pallets of nominal size greater than 800 mm
90.93
60.60
ISO 8540:1993
Open front mechanical power presses -- Vocabulary
90.60
ISO 9188:1993
Machine tools -- Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force -- Characteristics and dimensions
90.60
ISO 9189:1993
Machine tools -- Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force -- Characteristics and dimensions
90.60
ISO 14955-1:2014
Machine tools -- Environmental evaluation of machine tools -- Part 1: Design methodology for energy-efficient machine tools
90.92
ISO/DIS 14955-1 [Under development]
Machine tools -- Environmental evaluation of machine tools -- Part 1: Design methodology for energy-efficient machine tools
40.99
ISO/DIS 14955-2 [Under development]
Machine tools - Environmental evaluation of machine tools -- Part 2: Methods for measuring energy supplied to machine tools and machine tool components
40.99
ISO/NP 14955-3 [Under development]
Machine tools -- Environmental evaluation of machine tools -- Part 3: Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency
10.99
ISO/DIS 14955-4 [Under development]
Machine tools -- Environmental evaluation of machine tools -- Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency
40.60
ISO/WD 14955-5 [Under development]
Machine tools -- Environmental evaluation of machine tools -- Part 5: Principles for testing woodworking machine tools with respect to energy efficiency
20.20
ISO 23848-1:2009
Machine tools -- Ball splines -- Part 1: General characteristics and requirements
90.93
ISO 23848-2:2009
Machine tools -- Ball splines -- Part 2: Dynamic and static load ratings and rating life
90.93
ISO 29262:2011
Production equipment for microsystems -- Interface between end effector and handling system
90.93

No matching records found