<meta-date>

Other Metadata Date

(In metadata) date on which some event in the development of a standard took place.

Remarks

This element is part of the ISOSTS customization of the JATS journal publishing vocabulary; it is not part of the base vocabulary.

Attribute

type Type

Related Elements

The <meta-date> should not be used for the initial publication date of the standard or for the release dates of amendments, revisions, or other later versions; the <pub-date> and <release-date> should be used instead.

Model Description

Text, numbers, or special characters, zero or more

This element may be contained in:

<iso-meta>, <nat-meta>, <reg-meta>

Example

	  
<standard>
  <front>  
    <!-- The comments in this sample reg-meta element identify the 
         relations between the elements in the XML document and
         the relevant columns in the CEN project management systems. 
         CEN is used as an example for a regional standards body. -->
    <reg-meta originator="CEN">
      <!-- Title of the standard  (corrsponds to PROJEXDATA WI_NSB.XML TITLE/lang) -->
      <title-wrap xml:lang='en'>
        <main>Bitumen and bituminous binders</main>
        <compl>Stabilisation of binder from bituminous emulsion or
          cut-back or fluxed bitumen after recovery</compl>
        <full>Bitumen and bituminous binders - Stabilisation of binder
          from bituminous emulsion or cut-back or fluxed bitumen after
          recovery</full>
      </title-wrap>
      <title-wrap xml:lang='fr'>
        <main>Bitumes et liants bitumineux</main>
        <compl>Stabilisation du liant d'une émulsion de bitume ou
          d'un bitume fluidifié ou fluxé après récupération</compl>
        <full>Bitumes et liants bitumineux - Stabilisation du liant
          d'une émulsion de bitume ou d'un bitume fluidifié ou fluxé
          après récupération</full>
      </title-wrap>
      <title-wrap xml:lang='de'>
        <main>Bitumen und bitumenhaltige Bindemittel</main>
        <compl>Stabilisierung von Bindemittel aus Bitumenemulsion
          oder verschnittenem oder gefluxtem Bindemittel nach
          Rückgewinnung</compl>
        <full>Bitumen und bitumenhaltige Bindemittel -
          Stabilisierung von Bindemittel aus Bitumenemulsion oder
          verschnittenem oder gefluxtem Bindemittel nach
          Rückgewinnung</full>
      </title-wrap>
      
      <doc-ident>
        <!-- the organization producing/owning the standard -->
        <sdo>CEN</sdo>
        <!-- the organizations unique project ID through which the 
              standard has been produced; in CEN this corresponds 
              to the Work item id (WIID) -->
        <proj-id>22964</proj-id>

        <!-- the language of the document, this can be an individual
             language or a coding to represent multilingual documents, e.g.
               en = monolingual
               en,fr = bilingual en and fr
               en,ru = bilingual en and ru
               en,fr,ru = trilingual en, fr and ru
        -->
        <language>en</language>
        <!-- identifier of the project development phase this document
             belongs to; in CEN this corresponds to document production
             stage, such as 'Draft for Formal vote', 'Definitive text'
             etc (corresponds to PROJEXDATA SRV_NSB.XML element
             SRVTYPE)
        -->
        <release-version>Definitive text</release-version>
        <!-- URN for this document if available -->
        <urn></urn>
      </doc-ident>

     <std-ident>
        <originator>CEN</originator>
        <!-- Type of deliverable, e.g. EN, TR, TS, CWA - corresponds
             to PROJEXDATA WI_NSB.XML element DEL)-->
        <doc-type>EN</doc-type>
        <doc-number>3951</doc-number>
        <part-number>2</part-number>
        <edition>1</edition>
        <version>1</version>
        <!-- The Category identifies the class of the standard as to
             whether it is a basic standard, a supplement to a
             standard correcting errors or ambiguities or altering or
             supplementing the agreed technical provisions of the
             basic standard, a compiled version of a basic document
             and its corrigenda or amendments.  corresponds to
             PROJEXDATA WI_NSB.XML element:
                   CAT
           1 = Main
           2 = Amendment
           3 = Corrigendum
           4 = Main + Amendment
           5 = Main + Corrigendum
        -->
        <suppl-type>1</suppl-type>
        <!-- Indication if the document is undergoing a 2nd Enquiry,
             3rd Formal vote (iteration). Only present if <> 1 -->
        <suppl-number>1</suppl-number>
        <suppl-version></suppl-version>          
      </std-ident>
    
      <!-- this identifies the languages contained in the document,
           for monolingual documents it will be the same as <language>
           for multilingual documents the element should be repeated
           for every language -->
      <content-language>en</content-language>
      <!-- Short document reference (parent document). In the case of
           an amendment or a corrigenda, the references of the amended
           or corrected standard (SHORT_REF) -->
      <std-ref type="short">EN ISO 9902-6:2001</std-ref>
      <!-- Full document reference (REF) -->
      <std-ref type="dated">EN ISO 9902-6:2001/prA1</std-ref>
      <doc-ref>EN ISO 9902-6:2001(en,fr,de)</doc-ref>
      <!-- publication date of (first version of) this standard -->
      <pub-date>2011-03-12</pub-date>     
      <!-- date of availability (DAV) - only available for Definitive 
           texts-->
      <release-date>2011-03-12</release-date>
      <!-- date of ratification (DOR) -->
      <meta-date type="ratification">2011-09-03</meta-date>     
      <!-- date of withdrawal (DOW) -->
      <meta-date type="withdrawal"></meta-date>

      <!-- responsible body (TC) - corresponds tp PROJEXDATA RESP -->
      <comm-ref>CEN/TC 275</comm-ref>
      <!-- TC secretariat (SECR)-->
      <secretariat>AFNOR</secretariat>

      <!-- ICS classification (multivalued) -->     
      <ics>67.180.10</ics>

     
      <!-- links with other standards
           Release-date is not mandatory.
           The std-ident element is also allowed within std-xref
      -->     
      <std-xref type="amends">
        <!-- MOD_REF - Reference of the amended document. Only present
             in the case of an amendment or corrigenda and equal to
             the short ref -->
        <std-ref type="dated">EN ISO 9902-6:2001</std-ref>
        <!-- MOD_DAV - DAV of the amended document -->
        <release-date>2009-03-12</release-date>
      </std-xref>
      <std-xref type="revises">
        <!-- reference(s) of revised standards - can be multiple -
             corresponds to PROJEXDATA LINKS-->
        <std-ref type="dated">EN 10155:1993</std-ref>
      </std-xref>
    </reg-meta>
  </front>
  <body>
    ...
  </body>
</standard>


	

Module

ISOSTS-iso-metadata.ent