Главная

Каталог стандартов

Подписаться на обновления

ISO/TC 213  - Технические требования в отношении размерностей и геометрических размеров продукции и их проверки

Темы (или пункты), которые надо показать:


Стандарты и проекты под прямой ответственностью ISO/TC 213 Секретариат

Стандарт и/или проектСтадияМКС
ISO/DIS 1101
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out
40.20 01.100.20
17.040.10
ISO/DIS 1660
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Profile tolerancing
40.60 01.100.20
ISO 1938-1
Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Plain limit gauges of linear size
60.00 17.040.10
ISO/DIS 1938-2
Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Reference disk gauges
40.20 17.040.10
ISO 2538-1
Geometrical product specifications (GPS) -- Wedges -- Part 1: Series of angles and slopes
60.00 17.040.01
ISO 2538-2
Geometrical product specifications (GPS) -- Wedges -- Part 2: Dimensioning and tolerancing
60.00 17.040.01
ISO/FDIS 2692
Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
50.60 01.100.20
ISO 3040:2009/DAmd 1.2
40.60 01.100.20
ISO 4287:1997/DAmd 2
Parameters Xsm and Xc
50.00 01.040.17
17.040.20
ISO/CD 5458
Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional tolerancing
30.60 17.040.10
ISO 8062-3:2007/CD Amd 1
30.99 17.040.10
ISO/DIS 8062-4
Geometrical Product Specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 4: General tolerances for castings using profile tolerancing in a general datum system
40.60 17.040.10
ISO/DIS 10360-10.2
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 10: Laser trackers for measuring point-to-point distances
40.20 17.040.30
ISO/DIS 10360-12
Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 12: Articulated arm coordinate measurement machines (CMM)
40.00 17.040.30
ISO/NP 14253-4
Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 4: Background on functional limits and specification limits in decision rules
10.99 17.040.01
ISO/DIS 14253-5
Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 5: Uncertainty in testing indicating measuring instruments
40.60 17.040.01
ISO/DIS 14405-1.2
Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
40.60 17.040.10
ISO/DIS 14405-3
Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 3: Angular sizes
40.60 17.040.10
ISO/FDIS 14638
Geometrical product specifications (GPS) -- Matrix model
50.00 17.040.01
ISO/DIS 16610-1
Geometrical product specifications (GPS) -- Filtration -- Part 1: Overview and basic concepts
40.99 17.040.20
ISO/DIS 16610-20
Geometrical product specifications (GPS) -- Filtration -- Part 20: Linear profile filters: Basic concepts
40.99 17.040.20
ISO/DIS 16610-22
Geometrical product specifications (GPS) -- Filtration -- Part 22: Linear profile filters: Spline filters
40.99 17.040.20
ISO/CD 16610-28
Geometrical product specifications (GPS) -- Filtration -- Part 28: Profile filters: End effects
30.99 17.040.20
ISO/DIS 16610-29
Geometrical product specifications (GPS) -- Filtration -- Part 29: Linear profile filters: Spline wavelets
40.99 17.040.20
ISO/DIS 16610-30
Geometrical product specifications (GPS) -- Filtration -- Part 30: Robust profile filters: Basic concepts
40.60 17.040.20
ISO/CD 16610-31
Geometrical product specifications (GPS) -- Filtration -- Part 31: Robust profile filters: Gaussian regression filters
30.99 17.040.20
ISO/DIS 16610-32
Geometrical product specifications (GPS) -- Filtration -- Part 32: Robust profile filters: Spline filters
40.60 17.040.20
ISO/DIS 16610-40
Geometrical product specifications (GPS) -- Filtration -- Part 40: Morphological profile filters: Basic concepts
40.99 17.040.20
ISO/DIS 16610-41
Geometrical product specifications (GPS) -- Filtration -- Part 41: Morphological profile filters: Disk and horizontal line-segment filters
40.99 17.040.20
ISO/DIS 16610-49
Geometrical product specifications (GPS) -- Filtration -- Part 49: Morphological profile filters: Scale space techniques
40.99 17.040.20
ISO/DIS 16610-60
Geometrical Product Specification (GPS) -- Filtration -- Part 60: Linear areal filters -- Basic concepts
40.99 17.040.20
ISO/DIS 16610-61
Geometrical Product Specification (GPS) -- Filtration -- Part 61: Linear areal filters -- Gaussian filters
40.99 17.040.20
ISO/FDIS 16610-71
Geometrical product specifications (GPS) -- Filtration -- Part 71: Robust areal filters: Gaussian regression filters
50.60 17.040.20
ISO/DIS 17450-3
Geometrical product specifications (GPS) -- General concepts -- Part 3: Toleranced features
40.20 17.040.01
ISO/CD 17450-4
Geometrical product specification (GPS) -- Basic concepts -- Part 4: Geometrical characteristics
30.20 17.040.01
ISO/DTS 17865
Geometrical Product Specifications (GPS) -- Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
30.99 17.040.01
ISO/DIS 18391
Geometrical product specification (GPS) -- Population specification
40.20 17.040.01
ISO/DIS 25178-1
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 1: Indication of surface texture
50.00 17.040.20
ISO/CD 25178-71
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 71: Software measurement standards
30.99 17.040.20
ISO/CD 25178-72
Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 72: XML file format x3p
30.99 17.040.20
ISO/DIS 25178-606
Geometrical product specification (GPS) -- Surface texture: Areal -- Part 606: Nominal characteristics of non-contact (focus variation) instruments
50.00 17.040.20