Главная

Каталог стандартов

Подписаться на обновления

ISO/TC 107  - Металлические и другие неорганические покрытия

Темы (или пункты), которые надо показать:


Подкомитеты

Подкомитет Название подкомитета
ISO/TC 107/SC 3 Электролитические покрытия и соответствующая отделка
ISO/TC 107/SC 4 Горячие покрытия (оцинкованные и т.д.)
ISO/TC 107/SC 7 Испытания на коррозию
ISO/TC 107/SC 8 Конверсионные покрытия

Стандарты и проекты под прямой ответственностью ISO/TC 107 Секретариат

Стандарт и/или проектСтадияМКС
ISO/DIS 2063-1
Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys -- Part 1: Planning of the corrosion protection system -- Component design considerations and quality requirements
40.60 25.220.20
25.220.40
ISO/DIS 2063-2
Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys -- Part 2: Conditions for execution of corrosion protection works by thermal spray processes
40.60 25.220.20
25.220.40
ISO/DIS 2178
Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method
40.00 25.220.40
25.220.50
ISO/DIS 2746
Vitreous and porcelain enamels -- High voltage test
40.60 25.220.50
ISO/NP 3892
Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods
10.99 25.220.20
ISO/FDIS 4528
Vitreous and porcelain enamel finishes -- Guide to selection of test methods for vitreous and porcelain enamelled areas of articles
50.20 25.220.50
ISO/DIS 11177
Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing
40.20 25.220.50
91.140.60
ISO/WD TR 12750
Thermal spraying -- Determination of residual stress of plasma spray ceramic coatings by X-ray diffraction method
20.20 25.220.20
ISO/CD 14232-1
Thermal spraying -- Powders -- Part 1: Characterisation and technical supply conditions
30.00 25.220.20
ISO/WD TR 14232-2
Thermal spraying -- Powders -- Part 2: Comparison of coating performance and spray powder chemistry
20.20 25.220.20
ISO/CD 14916
Thermal spraying -- Determination of tensile adhesive strength
30.20 25.220.20
ISO/CD 14917
Thermal spraying -- Terminology, classification
30.20 01.040.25
25.220.20
ISO 14919
Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions
60.00 25.220.20
ISO 14920
Thermal spraying -- Spraying and fusing of self-fluxing alloys
60.00 25.220.20
ISO/CD 18535
Diamond-like carbon films -- Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
30.60 25.220.01
ISO/DIS 18555
Metallic and other inorganic coatings -- Determination of thermal conductivity of thermal barrier coatings
40.60 25.220.20
ISO/CD 19207
Classification method of adhesive strength by indentation
30.60 25.220.01
ISO/CD 19477
Metallic and other inorganic coatings -- Measurement of Young's modulus of thermal barrier coatings by beam bending
30.60 25.220.40
ISO/AWI 19496-2
Vitreous and porcelain enamels -- Terminology -- Part 2: Visual representations and descriptions
20.00
ISO/DIS 27307
Evaluation of adhesion/cohesion of plasma sprayed ceramic coatings by scratch testing
40.99 25.220.20
ISO/CD 28706-2
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours
30.00 25.220.50
ISO/AWI 28706-3
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel
20.00 25.220.50
ISO/NP 28706-4
Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel
10.99 25.220.50
ISO/NP 28721-2
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 2: Designation and specification of resistance to chemical attack and thermal shock
10.99 25.220.50
ISO/DIS 28721-4
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings
40.99 25.220.50
ISO/DIS 28721-5
Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 5: Presentation and characterisation of defects
40.20 25.220.50
ISO/NP 28722
Vitreous and porcelain enamels -- Characteristics of enamel coatings applied to steel panels intended for architecture
10.99 25.220.50
ISO/NP 28764
Vitreous and porcelain enamels -- Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron
10.99 25.220.50
ISO/NP 28765
Vitreous and porcelain enamels -- Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges
10.99 25.220.50