Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 186:2002 Paper and board -- Sampling to determine average quality | 90.93 | ISO/TC 6/SC 2 |
| ISO 187:1990 Paper, board and pulps -- Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples | 90.20 | ISO/TC 6/SC 2 |
| ISO/FDIS 217 Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges, and indication of machine direction | 50.60 | ISO/TC 6 |
| ISO 217:2008 Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges, and indication of machine direction | 90.92 | ISO/TC 6 |
| ISO 287:2009 Paper and board -- Determination of moisture content of a lot -- Oven-drying method | 60.60 | ISO/TC 6/SC 2 |
| ISO 534:2011 Paper and board -- Determination of thickness, density and specific volume | 60.60 | ISO/TC 6/SC 2 |
| ISO 535:1991 Paper and board -- Determination of water absorptiveness -- Cobb method | 90.92 | ISO/TC 6/SC 2 |
| ISO/DIS 535 Paper and board -- Determination of water absorptiveness -- Cobb method | 40.99 | ISO/TC 6/SC 2 |
| ISO 536:2012 Paper and board -- Determination of grammage | 60.60 | ISO/TC 6/SC 2 |
| ISO 638:2008 Paper, board and pulps -- Determination of dry matter content -- Oven-drying method | 90.93 | ISO/TC 6 |
| ISO 1924-2:2008 Paper and board -- Determination of tensile properties -- Part 2: Constant rate of elongation method (20 mm/min) | 90.93 | ISO/TC 6/SC 2 |
| ISO 1924-3:2005 Paper and board -- Determination of tensile properties -- Part 3: Constant rate of elongation method (100 mm/min) | 90.93 | ISO/TC 6/SC 2 |
| ISO 1974:2012 Paper -- Determination of tearing resistance -- Elmendorf method | 60.60 | ISO/TC 6/SC 2 |
| ISO 2144:1997 Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C | 90.20 | ISO/TC 6 |
| ISO/DIS 2469 Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor) | 40.00 | ISO/TC 6 |
| ISO 2469:2007 Paper, board and pulps -- Measurement of diffuse radiance factor | 90.92 | ISO/TC 6 |
| ISO 2470-1:2009 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness) | 60.60 | ISO/TC 6 |
| ISO 2470-2:2008 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness) | 90.93 | ISO/TC 6 |
| ISO 2471:2008 Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method | 90.93 | ISO/TC 6 |
| ISO 2493-1:2010 Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection | 60.60 | ISO/TC 6/SC 2 |
| ISO 2493-2:2011 Paper and board -- Determination of bending resistance -- Part 2: Taber-type tester | 60.60 | ISO/TC 6/SC 2 |
| ISO 2528:1995 Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (dish) method | 90.93 | ISO/TC 6/SC 2 |
| ISO/DIS 2758 Paper -- Determination of bursting strength | 40.99 | ISO/TC 6/SC 2 |
| ISO 2758:2001 Paper -- Determination of bursting strength | 90.92 | ISO/TC 6/SC 2 |
| ISO 2759:2001 Board -- Determination of bursting strength | 90.92 | ISO/TC 6/SC 2 |
| ISO/DIS 2759 Board -- Determination of bursting strength | 40.99 | ISO/TC 6/SC 2 |
| ISO 3034:2011 Corrugated fibreboard -- Determination of single sheet thickness | 60.60 | ISO/TC 6/SC 2 |
| ISO 3035:2011 Corrugated fibreboard -- Determination of flat crush resistance | 60.60 | ISO/TC 6/SC 2 |
| ISO 3036:1975 Board -- Determination of puncture resistance | 90.93 | ISO/TC 6/SC 2 |
| ISO/FDIS 3037 Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method) | 50.20 | ISO/TC 6/SC 2 |
| ISO 3037:2007 Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method) | 90.92 | ISO/TC 6/SC 2 |
| ISO 3038:1975 Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion | 90.93 | ISO/TC 6/SC 2 |
| ISO 3039:2010 Corrugated fibreboard -- Determination of grammage of the component papers after separation | 60.60 | ISO/TC 6/SC 2 |
| ISO 3689:1983 Paper and board -- Determination of bursting strength after immersion in water | 90.93 | ISO/TC 6/SC 2 |
| ISO 3781:2011 Paper and board -- Determination of tensile strength after immersion in water | 60.60 | ISO/TC 6/SC 2 |
| ISO 3783:2006 Paper and board -- Determination of resistance to picking -- Accelerated speed method using the IGT-type tester (electric model) | 90.93 | ISO/TC 6/SC 2 |
| ISO 4046-1:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index | 90.20 | ISO/TC 6 |
| ISO 4046-4:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products | 90.20 | ISO/TC 6 |
| ISO 4046-5:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board | 90.20 | ISO/TC 6 |
| ISO 4094:2005 Paper, board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories | 90.93 | ISO/TC 6 |
| ISO 5626:1993 Paper -- Determination of folding endurance | 90.93 | ISO/TC 6/SC 2 |
| ISO 5627:1995 Paper and board -- Determination of smoothness (Bekk method) | 90.93 | ISO/TC 6/SC 2 |
| ISO 5627:1995/Cor 1:2002 | 60.60 | ISO/TC 6/SC 2 |
| ISO 5628:2012 Paper and board -- Determination of bending stiffness -- General principles for two-point, three-point and four-point methods | 60.60 | ISO/TC 6/SC 2 |
| ISO 5629:1983 Paper and board -- Determination of bending stiffness -- Resonance method | 90.93 | ISO/TC 6/SC 2 |
| ISO 5630-1:1991 Paper and board -- Accelerated ageing -- Part 1: Dry heat treatment at 105 degrees C | 90.93 | ISO/TC 6/SC 2 |
| ISO 5630-3:1996 Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity | 90.93 | ISO/TC 6/SC 2 |
| ISO 5630-4:1986 Paper and board -- Accelerated ageing -- Part 4: Dry heat treatment at 120 or 150 degrees C | 90.93 | ISO/TC 6/SC 2 |
| ISO 5630-5:2008 Paper and board -- Accelerated ageing -- Part 5: Exposure to elevated temperature at 100 degrees C | 90.93 | ISO/TC 6/SC 2 |
| ISO 5630-6:2009 Paper and board -- Accelerated ageing -- Part 6: Exposure to atmospheric pollution (nitrogen dioxide) | 60.60 | ISO/TC 6/SC 2 |
| ISO/CD 5630-7 Paper and board -- Accelerated ageing -- Part 7: Exposure to light | 30.60 | ISO/TC 6/SC 2 |
| ISO 5631-1:2009 Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees) | 60.60 | ISO/TC 6 |
| ISO 5631-2:2008 Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees) | 90.92 | ISO/TC 6 |
| ISO/DIS 5631-2 Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees) | 40.99 | ISO/TC 6 |
| ISO 5631-3:2008 Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees) | 90.92 | ISO/TC 6 |
| ISO/DIS 5631-3 Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees) | 40.99 | ISO/TC 6 |
| ISO 5633:1983 Paper and board -- Determination of resistance to water penetration | 90.93 | ISO/TC 6/SC 2 |
| ISO 5635:1978 Paper -- Measurement of dimensional change after immersion in water | 90.93 | ISO/TC 6/SC 2 |
| ISO 5636-1:1984 Paper and board -- Determination of air permeance (medium range) -- Part 1: General method | 90.20 | ISO/TC 6/SC 2 |
| ISO/DIS 5636-3 Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method | 40.99 | ISO/TC 6/SC 2 |
| ISO 5636-3:1992 Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method | 90.92 | ISO/TC 6/SC 2 |
| ISO 5636-4:2005 Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method | 90.92 | ISO/TC 6/SC 2 |
| ISO/DIS 5636-4 Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method | 40.99 | ISO/TC 6/SC 2 |
| ISO 5636-5:2003 Paper and board -- Determination of air permeance and air resistance (medium range) -- Part 5: Gurley method | 90.92 | ISO/TC 6/SC 2 |
| ISO/DIS 5636-5 Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method | 40.99 | ISO/TC 6/SC 2 |
| ISO/CD 5636-6 Paper and board -- Determination of air permeance and air resistance (medium range) -- Part 6: Oken method | 30.99 | ISO/TC 6/SC 2 |
| ISO 5637:1989 Paper and board -- Determination of water absorption after immersion in water | 90.93 | ISO/TC 6/SC 2 |
| ISO 5638:1978 Solid fibreboard -- Determination of grammage of single layers | 90.93 | ISO/TC 6/SC 2 |
| ISO 5647:1990 Paper and board -- Determination of titanium dioxide content | 90.93 | ISO/TC 6 |
| ISO 6587:1992 Paper, board and pulps -- Determination of conductivity of aqueous extracts | 90.20 | ISO/TC 6 |
| ISO 6588-1:2012 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction | 60.60 | ISO/TC 6 |
| ISO 6588-2:2012 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction | 60.60 | ISO/TC 6 |
| ISO 7263:2011 Corrugating medium -- Determination of the flat crush resistance after laboratory fluting | 60.60 | ISO/TC 6/SC 2 |
| ISO 8226-1:1994 Paper and board -- Measurement of hygroexpansivity -- Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % | 90.93 | ISO/TC 6/SC 2 |
| ISO 8226-2:1990 Paper and board -- Measurement of hygroexpansivity -- Part 2: Hygroexpansivity up to a maximum relative humidity of 86 % | 90.20 | ISO/TC 6/SC 2 |
| ISO 8254-1:2009 Paper and board -- Measurement of specular gloss -- Part 1: 75 degree gloss with a converging beam, TAPPI method | 60.60 | ISO/TC 6 |
| ISO 8254-2:2003 Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method | 90.93 | ISO/TC 6 |
| ISO 8254-3:2004 Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method | 90.93 | ISO/TC 6 |
| ISO 8784-1:2005 Pulp, paper and board -- Microbiological examination -- Part 1: Total count of bacteria, yeast and mould based on disintegration | 90.92 | ISO/TC 6/SC 2 |
| ISO/DIS 8784-1 Pulp, paper and board -- Microbiological examination -- Part 1: Enumeration of bacteria and bacterial spores based on disintegration | 40.99 | ISO/TC 6/SC 2 |
| ISO 8787:1986 Paper and board -- Determination of capillary rise -- Klemm method | 90.93 | ISO/TC 6/SC 2 |
| ISO 8791-1:1986 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method | 90.93 | ISO/TC 6/SC 2 |
| ISO 8791-2:1990 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method | 90.92 | ISO/TC 6/SC 2 |
| ISO/FDIS 8791-2 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method | 50.00 | ISO/TC 6/SC 2 |
| ISO 8791-3:2005 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method | 90.92 | ISO/TC 6/SC 2 |
| ISO 8791-4:2007 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method | 90.93 | ISO/TC 6/SC 2 |
| ISO 9184-1:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 1: General method | 90.93 | ISO/TC 6 |
| ISO 9184-2:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 2: Staining guide | 90.93 | ISO/TC 6 |
| ISO 9184-3:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test | 90.93 | ISO/TC 6 |
| ISO 9184-4:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test | 90.93 | ISO/TC 6 |
| ISO 9184-5:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar) | 90.93 | ISO/TC 6 |
| ISO 9184-6:1994 Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness | 90.93 | ISO/TC 6 |
| ISO 9184-7:1994 Paper, board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor | 90.93 | ISO/TC 6 |
| ISO 9197:2006 Paper, board and pulps -- Determination of water-soluble chlorides | 90.93 | ISO/TC 6 |
| ISO 9198:2001 Paper, board and pulp -- Determination of water-soluble sulfates | 90.93 | ISO/TC 6 |
| ISO 9416:2009 Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) | 60.60 | ISO/TC 6 |
| ISO 9706:1994 Information and documentation -- Paper for documents -- Requirements for permanence | 90.93 | ISO/TC 46 |
| ISO 9895:2008 Paper and board -- Compressive strength -- Short-span test | 90.93 | ISO/TC 6/SC 2 |
| ISO 9932:1990 Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods | 90.20 | ISO/TC 6/SC 2 |
| ISO/NP TR 10688 Paper, board and pulps -- Basic equations for optical properties | 10.99 | ISO/TC 6 |
| ISO 10716:1994 Paper and board -- Determination of alkali reserve | 90.93 | ISO/TC 6 |
| ISO 10775:1995 Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method | 90.92 | ISO/TC 6 |
| ISO/FDIS 10775 Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method | 50.20 | ISO/TC 6 |
| ISO 11093-1:1994 Paper and board -- Testing of cores -- Part 1: Sampling | 90.93 | ISO/TC 6 |
| ISO 11093-2:1994 Paper and board -- Testing of cores -- Part 2: Conditioning of test samples | 90.93 | ISO/TC 6 |
| ISO 11093-3:1994 Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method | 90.93 | ISO/TC 6 |
| ISO 11093-4:1997 Paper and board -- Testing of cores -- Part 4: Measurement of dimensions | 90.93 | ISO/TC 6 |
| ISO 11093-5:2009 Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation | 60.60 | ISO/TC 6 |
| ISO 11093-5:2009/Cor 1:2010 | 60.60 | ISO/TC 6 |
| ISO 11093-6:2005 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method | 90.93 | ISO/TC 6 |
| ISO 11093-7:2011 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method | 60.60 | ISO/TC 6 |
| ISO 11093-8:2012 Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis | 60.60 | ISO/TC 6 |
| ISO 11093-8:2012/Cor 1:2013 | 60.60 | ISO/TC 6 |
| ISO 11093-9:2006 Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance | 90.93 | ISO/TC 6 |
| ISO 11108:1996 Information and documentation -- Archival paper -- Requirements for permanence and durability | 90.93 | ISO/TC 46 |
| ISO 11475:2004 Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight) | 90.92 | ISO/TC 6 |
| ISO 11476:2010 Paper and board -- Determination of CIE whiteness, C/2 degrees (indoor illumination conditions) | 90.92 | ISO/TC 6 |
| ISO 11480:1997 Pulp, paper and board -- Determination of total chlorine and organically bound chlorine | 90.93 | ISO/TC 6 |
| ISO 11556:2005 Paper and board -- Determination of curl using a single vertically suspended test piece | 90.93 | ISO/TC 6/SC 2 |
| ISO 12192:2011 Paper and board -- Determination of compressive strength -- Ring crush method | 60.60 | ISO/TC 6/SC 2 |
| ISO 12625-1:2011 Tissue paper and tissue products -- Part 1: General guidance on terms | 60.60 | ISO/TC 6/SC 2 |
| ISO/DIS 12625-3 Tissue paper and tissue products -- Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk | 40.20 | ISO/TC 6/SC 2 |
| ISO 12625-3:2005 Tissue paper and tissue products -- Part 3: Determination of thickness, bulking thickness and apparent bulk density | 90.92 | ISO/TC 6/SC 2 |
| ISO 12625-4:2005 Tissue paper and tissue products -- Part 4: Determination of tensile strength, stretch at break and tensile energy absorption | 90.93 | ISO/TC 6/SC 2 |
| ISO 12625-5:2005 Tissue paper and tissue products -- Part 5: Determination of wet tensile strength | 90.93 | ISO/TC 6/SC 2 |
| ISO 12625-6:2005 Tissue paper and tissue products -- Part 6: Determination of grammage | 90.93 | ISO/TC 6/SC 2 |
| ISO 12625-7:2007 Tissue paper and tissue products -- Part 7: Determination of optical properties | 90.92 | ISO/TC 6/SC 2 |
| ISO/DIS 12625-7.2 Tissue paper and tissue products -- Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) | 40.60 | ISO/TC 6/SC 2 |
| ISO 12625-8:2010 Tissue paper and tissue products -- Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method | 60.60 | ISO/TC 6/SC 2 |
| ISO 12625-9:2005 Tissue paper and tissue products -- Part 9: Determination of ball burst strength | 90.92 | ISO/TC 6/SC 2 |
| ISO 12625-11:2012 Tissue paper and tissue products -- Part 11: Determination of wet ball burst strength | 60.60 | ISO/TC 6/SC 2 |
| ISO 12625-12:2010 Tissue paper and tissue products -- Part 12: Determination of tensile strength of perforated lines -- Calculation of perforation efficiency | 60.60 | ISO/TC 6/SC 2 |
| ISO 12830:2011 Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium | 60.60 | ISO/TC 6 |
| ISO 13542:2006 Paper and board -- Specification for internal diameters of cores for reels | 90.93 | ISO/TC 6 |
| ISO 13821:2002 Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method | 90.20 | ISO/TC 6/SC 2 |
| ISO/CD 14778 Paper and board -- Determination of contact angle | 30.60 | ISO/TC 6/SC 2 |
| ISO 14968:1999 Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets | 90.93 | ISO/TC 6/SC 2 |
| ISO 15318:1999 Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB) | 90.93 | ISO/TC 6 |
| ISO 15320:2011 Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract | 60.60 | ISO/TC 6 |
| ISO 15359:1999 Paper and board -- Determination of the static and kinetic coefficients of friction -- Horizontal plane method | 90.93 | ISO/TC 6/SC 2 |
| ISO 15754:2009 Paper and board -- Determination of z-directional tensile strength | 60.60 | ISO/TC 6/SC 2 |
| ISO 15755:1999 Paper and board -- Estimation of contraries | 90.93 | ISO/TC 6/SC 2 |
| ISO/CD 16260 Paper and board - Determination of internal bond strength | 30.60 | ISO/TC 6/SC 2 |
| ISO 16532-1:2008 Paper and board -- Determination of grease resistance -- Part 1: Permeability test | 90.93 | ISO/TC 6/SC 2 |
| ISO 16532-2:2007 Paper and board -- Determination of grease resistance -- Part 2: Surface repellency test | 90.93 | ISO/TC 6/SC 2 |
| ISO 16532-3:2010 Paper and board -- Determination of grease resistance -- Part 3: Turpentine test for voids in glassine and greaseproof papers | 60.60 | ISO/TC 6/SC 2 |
| ISO/DIS 16945 Corrugating medium -- Determination of the edge crush resistance after laboratory fluting | 40.20 | ISO/TC 6/SC 2 |
| ISO 17812:2007 Paper, board and pulps -- Determination of total magnesium, total calcium, total manganese, total iron and total copper | 90.93 | ISO/TC 6 |
| ISO/TS 17958:2013 Paper and board -- Determination of fracture toughness -- Constant rate of elongation method (1,7 mm/s) | 60.60 | ISO/TC 6/SC 2 |
| ISO/WD 18522 Paper and Board -- Automated off-line testing of physical properties for CD (Cross Direction) profiles | 20.20 | ISO/TC 6 |
| ISO 22414:2004 Paper -- Cut-size office paper -- Measurement of edge quality | 90.20 | ISO/TC 6/SC 2 |
| ISO 22754:2008 Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement | 90.93 | ISO/TC 6 |
| ISO 22891:2013 Paper -- Determination of transmittance by diffuse reflectance measurement | 60.60 | ISO/TC 6 |
| ISO/TR 24498:2006 Paper, board and pulps -- Estimation of uncertainty for test methods | 90.60 | ISO/TC 6 |
| ISO/TR 25477:2008 Paper, board and pulps - Basic guidelines for image analysis measurements | 60.60 | ISO/TC 6 |
