Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO 182-1:1990 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method | 90.93 | ISO/TC 61/SC 9 |
| ISO 182-2:1990 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 2: pH method | 90.93 | ISO/TC 61/SC 9 |
| ISO 182-3:1993 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 3: Conductometric method | 90.93 | ISO/TC 61/SC 9 |
| ISO 182-4:1993 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method | 90.93 | ISO/TC 61/SC 9 |
| ISO 293:2004 Plastics -- Compression moulding of test specimens of thermoplastic materials | 90.93 | ISO/TC 61/SC 9 |
| ISO 294-1:1996 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens | 90.93 | ISO/TC 61/SC 9 |
| ISO 294-1:1996/Amd 1:2001 | 60.60 | ISO/TC 61/SC 9 |
| ISO 294-1:1996/Amd 2:2005 Methods of determining the hold pressure and hold time | 60.60 | ISO/TC 61/SC 9 |
| ISO 294-2:1996 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars | 90.93 | ISO/TC 61/SC 9 |
| ISO 294-2:1996/Amd 1:2004 | 60.60 | ISO/TC 61/SC 9 |
| ISO 294-3:2002 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates | 90.93 | ISO/TC 61/SC 9 |
| ISO 294-3:2002/Amd 1:2006 | 60.60 | ISO/TC 61/SC 9 |
| ISO 294-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage | 90.93 | ISO/TC 61/SC 9 |
| ISO 294-5:2011 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy | 60.60 | ISO/TC 61/SC 9 |
| ISO 305:1990 Plastics -- Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds -- Discoloration method | 90.93 | ISO/TC 61/SC 9 |
| ISO 306:2004 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST) | 90.92 | ISO/TC 61/SC 2 |
| ISO/FDIS 306 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST) | 50.00 | ISO/TC 61/SC 2 |
| ISO 307:2007 Plastics -- Polyamides -- Determination of viscosity number | 90.93 | ISO/TC 61/SC 9 |
| ISO 307:2007/Amd 1:2013 Corrections, and update to reference to JIS K 6920-2 | 60.60 | ISO/TC 61/SC 9 |
| ISO 458-2:1985 Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride | 90.93 | ISO/TC 61/SC 2 |
| ISO 585:1990 Plastics -- Unplasticized cellulose acetate -- Determination of moisture content | 90.93 | ISO/TC 61/SC 9 |
| ISO 1060-1:1998 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications | 90.20 | ISO/TC 61/SC 9 |
| ISO 1060-2:1998 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 1061:1990 Plastics -- Unplasticized cellulose acetate -- Determination of free acidity | 90.93 | ISO/TC 61/SC 9 |
| ISO 1068:1975 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of compacted apparent bulk density | 90.20 | ISO/TC 61/SC 9 |
| ISO 1110:1995 Plastics -- Polyamides -- Accelerated conditioning of test specimens | 90.60 | ISO/TC 61/SC 9 |
| ISO 1133-1:2011 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method | 60.60 | ISO/TC 61/SC 5 |
| ISO 1133-2:2011 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture | 60.60 | ISO/TC 61/SC 5 |
| ISO 1158:1998 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content | 90.20 | ISO/TC 61/SC 9 |
| ISO 1163-1:1995 Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
| ISO 1163-2:1995 Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 1264:1980 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract | 90.93 | ISO/TC 61/SC 9 |
| ISO 1265:2007 Plastics -- Poly(vinyl chloride) resins -- Determination of number of impurities and foreign particles | 90.93 | ISO/TC 61/SC 9 |
| ISO 1269:2006 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water) | 90.93 | ISO/TC 61/SC 9 |
| ISO 1598:1990 Plastics - Cellulose acetate -- Determination of insoluble particles | 90.93 | ISO/TC 61/SC 9 |
| ISO 1599:1990 Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding | 90.93 | ISO/TC 61/SC 9 |
| ISO 1600:1990 Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating | 90.93 | ISO/TC 61/SC 9 |
| ISO 1622-1:2012 Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | ISO/TC 61/SC 9 |
| ISO 1622-2:1995 Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 1624:2001 Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water | 90.60 | ISO/TC 61/SC 9 |
| ISO 1628-2:1998 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins | 90.20 | ISO/TC 61/SC 9 |
| ISO 1628-3:2010 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes | 60.60 | ISO/TC 61/SC 9 |
| ISO 1628-4:1999 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials | 90.93 | ISO/TC 61/SC 9 |
| ISO 1628-6:1990 Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers | 90.60 | ISO/TC 61/SC 9 |
| ISO 1872-1:1993 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
| ISO 1872-2:2007 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 1873-1:1995 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | ISO/TC 61/SC 9 |
| ISO 1873-2:2007 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 1874-1:2010 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system and basis for specification | 90.92 | ISO/TC 61/SC 9 |
| ISO 1874-2:2012 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | ISO/TC 61/SC 9 |
| ISO 1875:1982 Plastics -- Plasticized cellulose acetate -- Determination of matter extractable by diethyl ether | 90.20 | ISO/TC 61/SC 9 |
| ISO 2561:2012 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography | 60.60 | ISO/TC 61/SC 9 |
| ISO 2580-1:2002 Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | ISO/TC 61/SC 9 |
| ISO 2580-2:2003 Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 2897-1:1997 Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | ISO/TC 61/SC 9 |
| ISO 2897-2:2003 Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.20 | ISO/TC 61/SC 9 |
| ISO 2898-1:1996 Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.60 | ISO/TC 61/SC 9 |
| ISO 2898-2:2008 Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 3451-2:1998 Plastics -- Determination of ash -- Part 2: Poly(alkylene terephthalate) materials | 90.93 | ISO/TC 61/SC 5 |
| ISO 3451-3:1984 Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate | 90.93 | ISO/TC 61/SC 5 |
| ISO 3451-4:1998 Plastics -- Determination of ash -- Part 4: Polyamides | 90.93 | ISO/TC 61/SC 5 |
| ISO 3451-5:2002 Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride) | 90.93 | ISO/TC 61/SC 5 |
| ISO 4574:1978 Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption | 90.93 | ISO/TC 61/SC 9 |
| ISO 4575:2007 Plastics -- Poly(vinyl chloride) pastes -- Determination of apparent viscosity using the Severs rheometer | 90.93 | ISO/TC 61/SC 9 |
| ISO 4577:1983 Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method | 90.93 | ISO/TC 61/SC 9 |
| ISO 4581:1994 Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method | 90.93 | ISO/TC 61/SC 5 |
| ISO 4608:1998 Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature | 90.93 | ISO/TC 61/SC 9 |
| ISO 4610:2001 Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus | 90.93 | ISO/TC 61/SC 9 |
| ISO 4612:1999 Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method | 90.93 | ISO/TC 61/SC 9 |
| ISO 4613-1:1993 Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 1: Designation and specification | 90.93 | ISO/TC 61/SC 9 |
| ISO 4613-2:1995 Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 4613-2:1995/Amd 1:2004 | 60.60 | ISO/TC 61/SC 9 |
| ISO 4894-1:1997 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | ISO/TC 61/SC 9 |
| ISO 4894-2:1995 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 6186:1998 Plastics -- Determination of pourability | 90.20 | ISO/TC 61/SC 9 |
| ISO 6401:2008 Plastics -- Poly(vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method | 90.93 | ISO/TC 61/SC 5 |
| ISO 6402-1:2002 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | ISO/TC 61/SC 9 |
| ISO 6402-2:2003 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 6691:2000 Thermoplastic polymers for plain bearings -- Classification and designation | 90.93 | ISO/TC 123/SC 2 |
| ISO 7391-1:2006 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
| ISO 7391-2:2006 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 7792-1:2012 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | ISO/TC 61/SC 9 |
| ISO 7792-2:2012 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | ISO/TC 61/SC 9 |
| ISO 8257-1:1998 Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.20 | ISO/TC 61/SC 9 |
| ISO 8257-2:2001 Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 8985:1998 Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content | 90.20 | ISO/TC 61/SC 9 |
| ISO 8986-1:2009 Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | ISO/TC 61/SC 9 |
| ISO 8986-2:2009 Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | ISO/TC 61/SC 9 |
| ISO 9113:1986 Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index | 90.93 | ISO/TC 61/SC 9 |
| ISO 9988-1:2004 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.60 | ISO/TC 61/SC 9 |
| ISO 9988-2:2006 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 10350-1:2007 Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials | 90.93 | ISO/TC 61/SC 2 |
| ISO 10350-1:2007/DAmd 1.2 | 40.60 | ISO/TC 61/SC 2 |
| ISO 10366-1:2002 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | ISO/TC 61/SC 9 |
| ISO 10366-2:2003 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.20 | ISO/TC 61/SC 9 |
| ISO 11337:2010 Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography | 60.60 | ISO/TC 61/SC 5 |
| ISO 11468:1997 Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method | 90.60 | ISO/TC 61/SC 9 |
| ISO 11542-1:2001 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
| ISO 11542-2:1998 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.20 | ISO/TC 61/SC 9 |
| ISO 11542-2:1998/Cor 1:2007 | 60.60 | ISO/TC 61/SC 9 |
| ISO/DIS 12000 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods | 40.60 | ISO/TC 61/SC 9 |
| ISO 12000:2000 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods | 90.92 | ISO/TC 61/SC 9 |
| ISO 12086-1:2006 Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
| ISO 12086-1:2006/Cor 1:2006 | 60.60 | ISO/TC 61/SC 9 |
| ISO 12086-2:2006 Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 12086-2:2006/Cor 1:2006 | 60.60 | ISO/TC 61/SC 9 |
| ISO 12418-1:2012 Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications | 60.60 | ISO/TC 61/SC 9 |
| ISO 12418-2:2012 Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 2: Preparation of test specimens and determination of properties | 60.60 | ISO/TC 61/SC 9 |
| ISO 14446:1999 Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions | 90.93 | ISO/TC 35/SC 10 |
| ISO 14663-1:1999 Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
| ISO 14663-2:1999 Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 14910-1:2013 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specification | 60.60 | ISO/TC 61/SC 9 |
| ISO 14910-2:2013 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties | 60.60 | ISO/TC 61/SC 9 |
| ISO 15023-1:2001 Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
| ISO 15023-2:2003 Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties | 90.20 | ISO/TC 61/SC 9 |
| ISO 15103-2:2007 Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | ISO/TC 61/SC 9 |
| ISO 15373:2001 Plastics -- Polymer dispersions -- Determination of free formaldehyde | 90.93 | ISO/TC 61/SC 9 |
| ISO 15853:1999 Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding | 90.93 | ISO/TC 138/SC 5 |
| ISO/DIS 16365-1 Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 1: Designation system and basis for specifications | 40.60 | ISO/TC 61/SC 9 |
| ISO/DIS 16365-2 Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties | 40.60 | ISO/TC 61/SC 9 |
| ISO/DIS 16365-3 Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content | 40.60 | ISO/TC 61/SC 9 |
| ISO/DIS 16396-1 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system, marking of products and basis for specifications | 40.60 | ISO/TC 61/SC 9 |
| ISO 16770:2004 Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT) | 90.92 | ISO/TC 61/SC 9 |
| ISO 16790:2005 Plastics -- Determination of drawing characteristics of thermoplastics in the molten state | 90.20 | ISO/TC 61/SC 5 |
| ISO/DIS 17855-1 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 40.60 | ISO/TC 61/SC 9 |
| ISO 18064:2003 Thermoplastic elastomers -- Nomenclature and abbreviated terms | 90.20 | ISO/TC 45 |
| ISO/CD 18263-1 Plastics -- Mixed polypropylene (PP) and polyethylene (PE) recyclate -- Part 1: Designation system and basis for specifications | 30.20 | ISO/TC 61/SC 9 |
| ISO/CD 18263-2 Plastics -- Mixed polypropylene (PP) and polyethylene (PE) recyclate -- Part 2: Preparation of test specimens and determination of properties | 30.20 | ISO/TC 61/SC 9 |
| ISO/NP 19062-1 Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 10.99 | ISO/TC 61/SC 9 |
| ISO/NP 19063-1 Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 10.99 | ISO/TC 61/SC 9 |
| ISO/NP 19064-1 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 10.99 | ISO/TC 61/SC 9 |
| ISO/DIS 19065-1 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 40.00 | ISO/TC 61/SC 9 |
| ISO/DIS 19066-1 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 40.00 | ISO/TC 61/SC 9 |
| ISO/DIS 19069-1 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 40.00 | ISO/TC 61/SC 9 |
| ISO 19892:2011 Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of joints to pressure cycling | 60.60 | ISO/TC 138/SC 5 |
| ISO 22498:2005 Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving | 90.20 | ISO/TC 61/SC 9 |
| ISO 24538:2008 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder | 90.93 | ISO/TC 61/SC 5 |
| ISO 25137-1:2009 Plastics -- Sulfone polymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | ISO/TC 61/SC 9 |
| ISO 25137-2:2009 Plastics -- Sulfone polymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | ISO/TC 61/SC 9 |
| ISO 27547-1:2010 Plastics -- Preparation of test specimens of thermoplastic materials using mouldless technologies -- Part 1: General principles, and laser sintering of test specimens | 60.60 | ISO/TC 61/SC 9 |
| ISO 28078-1:2009 Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | ISO/TC 61/SC 9 |
| ISO 28078-2:2009 Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | ISO/TC 61/SC 9 |
| ISO 28941-1:2008 Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | ISO/TC 61/SC 9 |
