Mechanical testing in general, see 19.060
Mechanical testing of welded joints, see 25.160.40
Items to be displayed:
| Standard and/or project | Stage | TC |
|---|---|---|
| ISO/CD Guide 82 Guide for addressing sustainability in standards | 30.60 | ISO/TMB/WG SGDG |
| ISO 148-1:2009 Metallic materials -- Charpy pendulum impact test -- Part 1: Test method | 90.92 | ISO/TC 164/SC 4 |
| ISO 148-2:2008 Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines | 90.92 | ISO/TC 164/SC 4 |
| ISO 148-3:2008 Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines | 90.92 | ISO/TC 164/SC 4 |
| ISO 204:2009 Metallic materials -- Uniaxial creep testing in tension -- Method of test | 60.60 | ISO/TC 164/SC 1 |
| ISO 376:2011 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines | 60.60 | ISO/TC 164/SC 1 |
| ISO/FDIS 377 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing | 50.20 | ISO/TC 17/SC 20 |
| ISO 377:1997 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing | 90.92 | ISO/TC 17/SC 20 |
| ISO 377:1997/Cor 1:1997 | 60.60 | ISO/TC 17/SC 20 |
| ISO 946:1975 Grey cast iron -- Beam unnotched impact test | 90.93 | ISO/TC 25 |
| ISO 1099:2006 Metallic materials -- Fatigue testing -- Axial force-controlled method | 90.60 | ISO/TC 164/SC 5 |
| ISO 1143:2010 Metallic materials -- Rotating bar bending fatigue testing | 60.60 | ISO/TC 164/SC 5 |
| ISO 1352:2011 Metallic materials -- Torque-controlled fatigue testing | 60.60 | ISO/TC 164/SC 5 |
| ISO 2566-1:1984 Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels | 90.93 | ISO/TC 17/SC 20 |
| ISO 2566-2:1984 Steel -- Conversion of elongation values -- Part 2: Austenitic steels | 90.93 | ISO/TC 17/SC 20 |
| ISO 2739:2012 Sintered metal bushings -- Determination of radial crushing strength | 60.60 | ISO/TC 119/SC 3 |
| ISO 2740:2009 Sintered metal materials, excluding hardmetals -- Tensile test pieces | 60.60 | ISO/TC 119/SC 3 |
| ISO 3312:1987 Sintered metal materials and hardmetals -- Determination of Young modulus | 90.93 | ISO/TC 119/SC 3 |
| ISO 3325:1996 Sintered metal materials, excluding hardmetals -- Determination of transverse rupture strength | 90.93 | ISO/TC 119/SC 3 |
| ISO 3325:1996/Amd 1:2001 Precision statement | 60.60 | ISO/TC 119/SC 3 |
| ISO 3327:2009 Hardmetals -- Determination of transverse rupture strength | 60.60 | ISO/TC 119/SC 4 |
| ISO 3738-1:1982 Hardmetals -- Rockwell hardness test (scale A) -- Part 1: Test method | 90.60 | ISO/TC 119/SC 4 |
| ISO 3738-2:1988 Hardmetals -- Rockwell hardness test (scale A) -- Part 2: Preparation and calibration of standard test blocks | 90.20 | ISO/TC 119/SC 4 |
| ISO 3785:2006 Metallic materials -- Designation of test specimen axes in relation to product texture | 90.93 | ISO/TC 164/SC 4 |
| ISO 3878:1983 Hardmetals -- Vickers hardness test | 90.92 | ISO/TC 119/SC 4 |
| ISO/NP 3878 Hardmetals -- Vickers hardness test | 10.99 | ISO/TC 119/SC 4 |
| ISO 3928:1999 Sintered metal materials, excluding hardmetals -- Fatigue test pieces | 90.93 | ISO/TC 119/SC 3 |
| ISO 3995:1985 Metallic powders -- Determination of green strength by transverse rupture of rectangular compacts | 90.93 | ISO/TC 119/SC 2 |
| ISO 4498:2010 Sintered metal materials, excluding hardmetals -- Determination of apparent hardness and microhardness | 60.60 | ISO/TC 119/SC 3 |
| ISO 4506:1979 Hardmetals -- Compression test | 90.93 | ISO/TC 119/SC 4 |
| ISO 4507:2000 Sintered ferrous materials, carburized or carbonitrided -- Determination and verification of case-hardening depth by a micro-hardness test | 90.93 | ISO/TC 119/SC 3 |
| ISO 4545-1:2005 Metallic materials -- Knoop hardness test -- Part 1: Test method | 90.92 | ISO/TC 164/SC 3 |
| ISO 4545-2:2005 Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines | 90.92 | ISO/TC 164/SC 3 |
| ISO 4545-3:2005 Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks | 90.92 | ISO/TC 164/SC 3 |
| ISO 4545-4:2005 Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values | 90.92 | ISO/TC 164/SC 3 |
| ISO 4739:1985 Wrought copper and copper alloy products -- Selection and preparation of specimens and test pieces for mechanical testing | 90.60 | ISO/TC 26 |
| ISO 4965-1:2012 Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 1: Testing systems | 60.60 | ISO/TC 164/SC 5 |
| ISO 4965-2:2012 Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 2: Dynamic calibration device (DCD) instrumentation | 60.60 | ISO/TC 164/SC 5 |
| ISO 5754:1978 Sintered metal materials, excluding hardmetals -- Unnotched impact test piece | 90.93 | ISO/TC 119/SC 3 |
| ISO 6506-1:2005 Metallic materials -- Brinell hardness test -- Part 1: Test method | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 6506-1 Metallic materials -- Brinell hardness test -- Part 1: Test method | 40.20 | ISO/TC 164/SC 3 |
| ISO 6506-2:2005 Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 6506-2 Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines | 40.20 | ISO/TC 164/SC 3 |
| ISO 6506-3:2005 Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 6506-3 Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks | 40.20 | ISO/TC 164/SC 3 |
| ISO 6506-4:2005 Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 6506-4 Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values | 40.20 | ISO/TC 164/SC 3 |
| ISO 6507-1:2005 Metallic materials -- Vickers hardness test -- Part 1: Test method | 90.93 | ISO/TC 164/SC 3 |
| ISO 6507-2:2005 Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines | 90.93 | ISO/TC 164/SC 3 |
| ISO 6507-3:2005 Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks | 90.93 | ISO/TC 164/SC 3 |
| ISO 6507-4:2005 Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values | 90.93 | ISO/TC 164/SC 3 |
| ISO/DIS 6508-1 Metallic materials -- Rockwell hardness test -- Part 1: Test method | 40.20 | ISO/TC 164/SC 3 |
| ISO 6508-1:2005 Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 6508-2 Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines and indenters | 40.20 | ISO/TC 164/SC 3 |
| ISO 6508-2:2005 Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 6508-3 Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks | 40.20 | ISO/TC 164/SC 3 |
| ISO 6508-3:2005 Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) | 90.92 | ISO/TC 164/SC 3 |
| ISO 6892-1:2009 Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature | 90.92 | ISO/TC 164/SC 1 |
| ISO/CD 6892-1 Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature | 30.20 | ISO/TC 164/SC 1 |
| ISO 6892-2:2011 Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature | 60.60 | ISO/TC 164/SC 1 |
| ISO/DIS 6892-3 Metallic materials -- Tensile testing -- Part 3: Method of test at low temperature | 40.20 | ISO/TC 164/SC 1 |
| ISO 7438:2005 Metallic materials -- Bend test | 90.93 | ISO/TC 164/SC 2 |
| ISO 7500-1:2004 Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system | 90.92 | ISO/TC 164/SC 1 |
| ISO/DIS 7500-1 Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system | 40.20 | ISO/TC 164/SC 1 |
| ISO 7500-1:2004/Cor 1:2008 | 60.60 | ISO/TC 164/SC 1 |
| ISO 7500-2:2006 Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force | 90.93 | ISO/TC 164/SC 1 |
| ISO 7799:1985 Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test | 90.92 | ISO/TC 164/SC 2 |
| ISO 7800:2012 Metallic materials -- Wire -- Simple torsion test | 60.60 | ISO/TC 164/SC 2 |
| ISO 7801:1984 Metallic materials -- Wire -- Reverse bend test | 90.93 | ISO/TC 164/SC 2 |
| ISO 7802:1983 Metallic materials -- Wire -- Wrapping test | 90.92 | ISO/TC 164/SC 2 |
| ISO/FDIS 7802 Metallic materials -- Wire -- Wrapping test | 50.00 | ISO/TC 164/SC 2 |
| ISO 8491:1998 Metallic materials -- Tube (in full section) -- Bend test | 90.93 | ISO/TC 164/SC 2 |
| ISO/FDIS 8492 Metallic materials -- Tube -- Flattening test | 50.00 | ISO/TC 164/SC 2 |
| ISO 8492:1998 Metallic materials -- Tube -- Flattening test | 90.92 | ISO/TC 164/SC 2 |
| ISO 8493:1998 Metallic materials -- Tube -- Drift-expanding test | 90.93 | ISO/TC 164/SC 2 |
| ISO 8494:1998 Metallic materials -- Tube -- Flanging test | 90.92 | ISO/TC 164/SC 2 |
| ISO/FDIS 8494 Metallic materials -- Tube -- Flanging test | 50.00 | ISO/TC 164/SC 2 |
| ISO/FDIS 8495 Metallic materials -- Tube -- Ring-expanding test | 50.00 | ISO/TC 164/SC 2 |
| ISO 8495:1998 Metallic materials -- Tube -- Ring-expanding test | 90.92 | ISO/TC 164/SC 2 |
| ISO 8496:1998 Metallic materials -- Tube -- Ring tensile test | 90.92 | ISO/TC 164/SC 2 |
| ISO/FDIS 8496 Metallic materials -- Tube -- Ring tensile test | 50.00 | ISO/TC 164/SC 2 |
| ISO 9513:2012 Metallic materials -- Calibration of extensometer systems used in uniaxial testing | 60.60 | ISO/TC 164/SC 1 |
| ISO 9513:2012/Cor 1:2013 | 60.60 | ISO/TC 164/SC 1 |
| ISO 9649:1990 Metallic materials -- Wire -- Reverse torsion test | 90.92 | ISO/TC 164/SC 2 |
| ISO/TR 10108:1989 Steel -- Conversion of hardness values to tensile strength values | 60.60 | ISO/TC 17/SC 20 |
| ISO 10113:2006 Metallic materials -- Sheet and strip -- Determination of plastic strain ratio | 90.60 | ISO/TC 164/SC 2 |
| ISO 10275:2007 Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent | 90.60 | ISO/TC 164/SC 2 |
| ISO/DIS 11531 Metallic materials -- Earing test | 40.99 | ISO/TC 164/SC 2 |
| ISO 11531:1994 Metallic materials -- Earing test | 90.92 | ISO/TC 164/SC 2 |
| ISO 12004-1:2008 Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop | 90.93 | ISO/TC 164/SC 2 |
| ISO 12004-2:2008 Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory | 90.93 | ISO/TC 164/SC 2 |
| ISO/NP TR 12105 Metallic materials -- Fatigue testing -- General principles | 10.99 | ISO/TC 164/SC 5 |
| ISO 12106:2003 Metallic materials -- Fatigue testing -- Axial-strain-controlled method | 90.20 | ISO/TC 164/SC 5 |
| ISO 12107:2012 Metallic materials -- Fatigue testing -- Statistical planning and analysis of data | 60.60 | ISO/TC 164/SC 5 |
| ISO 12108:2012 Metallic materials -- Fatigue testing -- Fatigue crack growth method | 60.60 | ISO/TC 164/SC 5 |
| ISO/FDIS 12110-1 Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 1: General principles, test method and reporting requirements | 50.20 | ISO/TC 164/SC 5 |
| ISO/FDIS 12110-2 Metallic materials -- Fatigue testing -- Variable amplitude fatigue testing -- Part 2: Cycle counting and related data reduction methods | 50.20 | ISO/TC 164/SC 5 |
| ISO 12111:2011 Metallic materials -- Fatigue testing -- Strain-controlled thermomechanical fatigue testing method | 60.60 | ISO/TC 164/SC 5 |
| ISO/NP 12135 Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness | 10.99 | ISO/TC 164/SC 4 |
| ISO 12135:2002 Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness | 90.92 | ISO/TC 164/SC 4 |
| ISO 12135:2002/Cor 1:2008 | 60.60 | ISO/TC 164/SC 4 |
| ISO 12135:2002/NP Amd 1 | 10.99 | ISO/TC 164/SC 4 |
| ISO/TR 12735-2:1996 Mechanical testing of metals -- Symbols used with their definitions -- Part 2: Recommendations for the development of symbols and definitions | 60.60 | ISO/TC 164 |
| ISO 13314:2011 Mechanical testing of metals -- Ductility testing -- Compression test for porous and cellular metals | 60.60 | ISO/TC 164/SC 2 |
| ISO/DIS 14317 Sintered metal materials excluding hardmetals -- Determination of compressive yield strength | 40.20 | ISO/TC 119/SC 3 |
| ISO 14317:2006 Sintered metal materials excluding hardmetals -- Determination of compressive yield strength | 90.92 | ISO/TC 119/SC 3 |
| ISO 14556:2000 Steel -- Charpy V-notch pendulum impact test -- Instrumented test method | 90.92 | ISO/TC 164/SC 4 |
| ISO 14556:2000/Amd 1:2006 Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces | 60.60 | ISO/TC 164/SC 4 |
| ISO 14577-1:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 14577-1 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method | 40.99 | ISO/TC 164/SC 3 |
| ISO 14577-2:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines | 90.92 | ISO/TC 164/SC 3 |
| ISO/DIS 14577-2 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines | 40.99 | ISO/TC 164/SC 3 |
| ISO/DIS 14577-3 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks | 40.99 | ISO/TC 164/SC 3 |
| ISO 14577-3:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks | 90.92 | ISO/TC 164/SC 3 |
| ISO/CD 14577-4 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings | 30.00 | ISO/TC 164/SC 3 |
| ISO 14577-4:2007 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings | 90.92 | ISO/TC 164/SC 3 |
| ISO/TR 14936:1998 Metallic materials -- Strain analysis report | 90.60 | ISO/TC 164/SC 2 |
| ISO 15363:2000 Metallic materials -- Tube ring hydraulic pressure test | 90.93 | ISO/TC 164/SC 2 |
| ISO/TR 15461:1997 Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests | 60.60 | ISO/TC 17/SC 10 |
| ISO 15579:2000 Metallic materials -- Tensile testing at low temperature | 90.92 | ISO/TC 164/SC 1 |
| ISO 16630:2009 Metallic materials -- Sheet and strip -- Hole expanding test | 60.60 | ISO/TC 164/SC 2 |
| ISO/DIS 16808 Metallic materials -- Sheet and strip -- Determination of biaxial stress-strain curve ny means of bulge test with optical measuring systems | 40.20 | ISO/TC 164/SC 2 |
| ISO/DIS 16842 Metallic materials -- Sheet and strip -- Biaxial tensile testing method using cruciform specimen | 40.60 | ISO/TC 164/SC 2 |
| ISO/DIS 16859-1 Metallic materials -- Leeb hardness test -- Part 1: Test method | 40.20 | ISO/TC 164/SC 3 |
| ISO/DIS 16859-2 Metallic materials -- Leeb hardness test -- Part 2: Verification and calibration of the testing devices | 40.20 | ISO/TC 164/SC 3 |
| ISO/DIS 16859-3 Metallic materials -- Leeb hardness test -- Part 3: Calibration of reference test blocks | 40.20 | ISO/TC 164/SC 3 |
| ISO/DIS 17340 Metallic materials -- Ductility testing -- High speed compression test for porous and cellular metals | 40.99 | ISO/TC 164/SC 2 |
| ISO 18265:2003 Metallic materials -- Conversion of hardness values | 90.92 | ISO/TC 164/SC 3 |
| ISO/FDIS 18265 Metallic materials -- Conversion of hardness values | 50.20 | ISO/TC 164/SC 3 |
| ISO/CD 18338 Metallic materials -- Torsion test at ambient temperature | 30.20 | ISO/TC 164/SC 2 |
| ISO 19819:2004 Metallic materials -- Tensile testing in liquid helium | 90.92 | ISO/TC 164/SC 1 |
| ISO 20032:2007 Method for evaluation of tensile properties of metallic superplastic materials | 90.92 | ISO/TC 164/SC 2 |
| ISO/FDIS 20032 Method for evaluation of tensile properties of metallic superplastic materials | 50.60 | ISO/TC 164/SC 2 |
| ISO/FDIS 20482 Metallic materials -- Sheet and strip -- Erichsen cupping test | 50.00 | ISO/TC 164/SC 2 |
| ISO 20482:2003 Metallic materials -- Sheet and strip -- Erichsen cupping test | 90.92 | ISO/TC 164/SC 2 |
| ISO 22394:2010 Hardmetals -- Knoop hardness test | 60.60 | ISO/TC 119/SC 4 |
| ISO 22889:2007 Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint | 90.92 | ISO/TC 164/SC 4 |
| ISO/FDIS 22889 Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint | 50.00 | ISO/TC 164/SC 4 |
| ISO 23718:2007 Metallic materials -- Mechanical testing -- Vocabulary | 90.93 | ISO/TC 164 |
| ISO 23788:2012 Metallic materials -- Verification of the alignment of fatigue testing machines | 60.60 | ISO/TC 164/SC 5 |
| ISO 24213:2008 Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending | 90.93 | ISO/TC 164/SC 2 |
| ISO/TR 25679:2005 Mechanical testing of metals -- Symbols and definitions in published standards | 90.60 | ISO/TC 164 |
| ISO 26203-1:2010 Metallic materials -- Tensile testing at high strain rates -- Part 1: Elastic-bar-type systems | 60.60 | ISO/TC 164/SC 1 |
| ISO 26203-2:2011 Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems | 60.60 | ISO/TC 164/SC 1 |
| ISO 27306:2009 Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components | 60.60 | ISO/TC 164/SC 4 |
| ISO 28079:2009 Hardmetals -- Palmqvist toughness test | 60.60 | ISO/TC 119/SC 4 |
| ISO 28080:2011 Hardmetals -- Abrasion tests for hardmetals | 60.60 | ISO/TC 119/SC 4 |
| ISO/TR 29381:2008 Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties | 90.93 | ISO/TC 164/SC 3 |
