Home

Standards catalogue

Subscribe to updates

25.100.01: Cutting tools in general

Items to be displayed:

Standard and/or projectStage TC
ISO 237:1975
Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares
90.93 ISO/TC 29/SC 2
ISO 513:2012
Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application
60.60 ISO/TC 29/SC 9
ISO 883:2013
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions
60.60 ISO/TC 29/SC 9
ISO 1832:2012
Indexable inserts for cutting tools -- Designation
60.60 ISO/TC 29/SC 9
ISO 3002-1:1982
Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms, reference systems, tool and working angles, chip breakers
90.93 ISO/TC 29
ISO 3002-1:1982/Amd 1:1992
60.60 ISO/TC 29
ISO 3002-2:1982
Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles
90.60 ISO/TC 29
ISO 3002-3:1984
Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in cutting
90.60 ISO/TC 29
ISO 3002-4:1984
Basic quantities in cutting and grinding -- Part 4: Forces, energy, power
90.93 ISO/TC 29
ISO 3002-5:1989
Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes using grinding wheels
90.93 ISO/TC 29
ISO 3286:1976
Single point cutting tools -- Corner radii
90.60 ISO/TC 29/SC 9
ISO 3364:2011
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions
60.60 ISO/TC 29/SC 9
ISO 3365:1985
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions
90.60 ISO/TC 29/SC 9
ISO 4203:1978
Parallel shank tools -- Driving tenons and sockets -- Dimensions
90.93 ISO/TC 29/SC 2
ISO 5610-1:2014
Tool holders with rectangular shank for indexable inserts -- Part 1: General survey, correlation and determination of dimensions
60.60 ISO/TC 29/SC 9
ISO 5610-2:2014
Tool holders with rectangular shank for indexable inserts -- Part 2: Style A
60.60 ISO/TC 29/SC 9
ISO 5610-3:2014
Tool holders with rectangular shank for indexable inserts -- Part 3: Style B
60.60 ISO/TC 29/SC 9
ISO 5610-4:2014
Tool holders with rectangular shank for indexable inserts -- Part 4: Style D
60.60 ISO/TC 29/SC 9
ISO 5610-5:2014
Tool holders with rectangular shank for indexable inserts -- Part 5: Style F
60.60 ISO/TC 29/SC 9
ISO 5610-6:2014
Tool holders with rectangular shank for indexable inserts -- Part 6: Style G
60.60 ISO/TC 29/SC 9
ISO 5610-7:2014
Tool holders with rectangular shank for indexable inserts -- Part 7: Style J
60.60 ISO/TC 29/SC 9
ISO 5610-8:2014
Tool holders with rectangular shank for indexable inserts -- Part 8: Style K
60.60 ISO/TC 29/SC 9
ISO 5610-9:2014
Tool holders with rectangular shank for indexable inserts -- Part 9: Style L
60.60 ISO/TC 29/SC 9
ISO 5610-10:2014
Tool holders with rectangular shank for indexable inserts -- Part 10: Style N
60.60 ISO/TC 29/SC 9
ISO 5610-11:2014
Tool holders with rectangular shank for indexable inserts -- Part 11: Style R
60.60 ISO/TC 29/SC 9
ISO 5610-12:2014
Tool holders with rectangular shank for indexable inserts -- Part 12: Style S
60.60 ISO/TC 29/SC 9
ISO 5610-13:2014
Tool holders with rectangular shank for indexable inserts -- Part 13: Style T
60.60 ISO/TC 29/SC 9
ISO 5610-14:2014
Tool holders with rectangular shank for indexable inserts -- Part 14: Style H
60.60 ISO/TC 29/SC 9
ISO 5610-15:2014
Tool holders with rectangular shank for indexable inserts -- Part 15: Style V
60.60 ISO/TC 29/SC 9
ISO 5611:1995
Cartridges, type A, for indexable inserts -- Dimensions
90.92 ISO/TC 29/SC 9
ISO/DIS 5611-1
Cartridges, type A, for indexable inserts -- Dimensions -- Part 1: General survey; correlation of dimensions
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-2
Cartridges, type A, for indexable inserts -- Dimensions -- Part 2: Style F
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-3
Cartridges, type A, for indexable inserts -- Dimensions -- Part 3: Style G
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-4
Cartridges, type A, for indexable inserts -- Dimensions -- Part 4: Style J
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-5
Cartridges, type A, for indexable inserts -- Dimensions -- Part 5: Style K
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-6
Cartridges, type A, for indexable inserts -- Dimensions -- Part 6: Style L
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-7
Cartridges, type A, for indexable inserts -- Dimensions -- Part 7: Style R
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-8
Cartridges, type A, for indexable inserts -- Dimensions -- Part 8: Style S
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-9
Cartridges, type A, for indexable inserts -- Dimensions -- Part 9: Style T
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-10
Cartridges, type A, for indexable inserts -- Dimensions -- Part 10: Style U
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-11
Cartridges, type A, for indexable inserts -- Dimensions -- Part 11: Style W
40.00 ISO/TC 29/SC 9
ISO/DIS 5611-12
Cartridges, type A, for indexable inserts -- Dimensions -- Part 12: Style Y
40.00 ISO/TC 29/SC 9
ISO 6987:2012
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions
60.60 ISO/TC 29/SC 9
ISO 9361-1:2014
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 1: Dimensions of inserts without fixing hole
60.60 ISO/TC 29/SC 9
ISO 9361-2:2011
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners -- Part 2: Dimensions of inserts with cylindrical fixing hole
60.60 ISO/TC 29/SC 9
ISO 10643:2009
Dimensions of accessories for cutter arbors with parallel key and tenon drive
90.20 ISO/TC 29/SC 2
ISO 10910:1995
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers
90.93 ISO/TC 29/SC 9
ISO 11054:2006
Cutting tools -- Designation of high-speed steel groups
90.93 ISO/TC 29
ISO 13399-1:2006
Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and general information model
90.93 ISO/TC 29
ISO 13399-1:2006/Amd 1:2010
60.60 ISO/TC 29
ISO 13399-1:2006/Cor 1:2008
60.60 ISO/TC 29
ISO 13399-1:2006/Cor 2:2011
60.60 ISO/TC 29
ISO/TS 13399-2:2014
Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items
60.60 ISO/TC 29
ISO/TS 13399-2:2005/Cor 1:2011
60.60 ISO/TC 29
ISO/TS 13399-3:2014
Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items
60.60 ISO/TC 29
ISO/TS 13399-3:2007/Cor 1:2011
60.60 ISO/TC 29
ISO/TS 13399-4:2014
Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items
60.60 ISO/TC 29
ISO/TS 13399-4:2007/Cor 1:2011
60.60 ISO/TC 29
ISO/TS 13399-5:2014
Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items
60.60 ISO/TC 29
ISO/TS 13399-5:2007/Cor 1:2011
60.60 ISO/TC 29
ISO/TS 13399-50:2013
Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts
60.60 ISO/TC 29
ISO/TS 13399-50:2007/Cor 1:2011
60.60 ISO/TC 29
ISO/TS 13399-60:2014
Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems
60.60 ISO/TC 29
ISO/TS 13399-80:2014
Cutting tool data representation and exchange -- Part 80: Creation and exchange of 3D models -- Overview and principles
60.60 ISO/TC 29
ISO/NP TS 13399-100
Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries
10.99 ISO/TC 29
ISO/TS 13399-100:2008
Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries
90.92 ISO/TC 29
ISO/TS 13399-100:2008/Cor 1:2011
60.60 ISO/TC 29
ISO/TS 13399-150:2008
Cutting tool data representation and exchange -- Part 150: Usage guidelines
90.93 ISO/TC 29
ISO/TS 13399-201:2014
Cutting tool data representation and exchange -- Part 201: Creation and exchange of 3D models -- Regular inserts
60.60 ISO/TC 29
ISO/CD TS 13399-202
Cutting tool data representation and exchange -- Part 202: Creation and exchange of 3D models -- Irregular inserts
30.00 ISO/TC 29
ISO/CD TS 13399-203
Cutting tool data representation and exchange -- Part 203: Creation and exchange of 3D models -- Replaceable inserts for drilling
30.00 ISO/TC 29
ISO/CD TS 13399-204
Cutting tool data representation and exchange -- Part 204: Creation and exchange of 3D models -- Inserts for reaming
30.00 ISO/TC 29
ISO/TS 13399-301:2013
Cutting tool data representation and exchange -- Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
60.60 ISO/TC 29
ISO/TS 13399-302:2013
Cutting tool data representation and exchange -- Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
60.60 ISO/TC 29
ISO/NP TS 13399-303
Cutting tool data representation and exchange -- Part 303: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of end mills with solid cutting edges
10.99 ISO/TC 29
ISO/NP TS 13399-304
Cutting tool data representation and exchange -- Part 304: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of milling cutters with arbor hole and solid cutting edges
10.99 ISO/TC 29
ISO/NP TS 13399-307
Cutting tool data representation and exchange -- Part 307: Creation and exchange of 3D models - End mills for indexable inserts
10.99 ISO/TC 29
ISO/NP TS 13399-308
Cutting tool data representation and exchange -- Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
10.99 ISO/TC 29
ISO/CD TS 13399-309
Cutting tool data representation and exchange -- Part 309: Creation and exchange of 3D models -- Tool holders for indexable inserts
30.00 ISO/TC 29
ISO/NP TS 13399-311
Cutting tool data representation and exchange -- Part 311: Cretation and exchange of 3D models - Solid reamers
10.99 ISO/TC 29
ISO/NP TS 13399-312
Cutting tool data representation and exchange -- Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
10.99 ISO/TC 29
ISO/CD TS 13399-401
Cutting tool data representation and exchange -- Part 401: Creation and exchange of 3D models -- Converting, extending and reducing adaptive items
30.00 ISO/TC 29
ISO/CD TS 13399-405
Cutting tool data representation and exchange -- Part 405: Creation and exchange of 3D models -- Collets
30.00 ISO/TC 29
ISO 16462:2014
Cubic boron nitride inserts, tipped or solid -- Dimensions, types
60.60 ISO/TC 29/SC 9
ISO 16463:2014
Polycristalline diamond inserts, tipped -- Dimensions, types
60.60 ISO/TC 29/SC 9