Home

Standards catalogue

Subscribe to updates

21.060.10: Bolts, screws, studs

Items to be displayed:

Standard and/or projectStage TC
ISO 225:2010
Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions
60.60 ISO/TC 2/SC 7
ISO 885:2000
General purpose bolts and screws -- Metric series -- Radii under the head
90.93 ISO/TC 2/SC 7
ISO 888:2012
Fasteners -- Bolts, screws and studs -- Nominal lengths and thread lengths
60.60 ISO/TC 2/SC 7
ISO 898-1:2013
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread
60.60 ISO/TC 2/SC 11
ISO 898-1:2013/Cor 1:2013
60.60 ISO/TC 2/SC 11
ISO 898-5:2012
Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners with specified hardness classes -- Coarse thread and fine pitch thread
60.60 ISO/TC 2/SC 11
ISO 898-7:1992
Mechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
90.93 ISO/TC 2/SC 11
ISO 1207:2011
Slotted cheese head screws -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 1479:2011
Hexagon head tapping screws
60.60 ISO/TC 2/SC 13
ISO 1481:2011
Slotted pan head tapping screws
60.60 ISO/TC 2/SC 13
ISO 1482:2011
Slotted countersunk (flat) head tapping screws
60.60 ISO/TC 2/SC 13
ISO 1483:2011
Slotted raised countersunk (oval) head tapping screws
60.60 ISO/TC 2/SC 13
ISO 1580:2011
Slotted pan head screws -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 2009:2011
Slotted countersunk flat head screws -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 2010:2011
Slotted raised countersunk head screws -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 2342:2003
Slotted headless screws with shank
90.93 ISO/TC 2/SC 11
ISO 2702:2011
Heat-treated steel tapping screws -- Mechanical properties
60.60 ISO/TC 2/SC 13
ISO 3506-1:2009
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
90.92 ISO/TC 2
ISO 3506-3:2009
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress
60.60 ISO/TC 2
ISO 3506-4:2009
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 4: Tapping screws
60.60 ISO/TC 2
ISO 4014:2011
Hexagon head bolts -- Product grades A and B
60.60 ISO/TC 2/SC 11
ISO 4015:1979
Hexagon head bolts -- Product grade B -- Reduced shank (shank diameter approximately equal to pitch diameter)
90.93 ISO/TC 2/SC 11
ISO 4016:2011
Hexagon head bolts -- Product grade C
60.60 ISO/TC 2/SC 11
ISO 4017:2014
Fasteners -- Hexagon head screws -- Product grades A and B
60.60 ISO/TC 2/SC 11
ISO 4018:2011
Hexagon head screws -- Product grade C
60.60 ISO/TC 2/SC 11
ISO 4026:2003
Hexagon socket set screws with flat point
90.93 ISO/TC 2/SC 11
ISO 4027:2003
Hexagon socket set screws with cone point
90.93 ISO/TC 2/SC 11
ISO 4028:2003
Hexagon socket set screws with dog point
90.93 ISO/TC 2/SC 11
ISO 4029:2003
Hexagon socket set screws with cup point
90.93 ISO/TC 2/SC 11
ISO 4162:2012
Hexagon bolts with flange -- Small series -- Product grade A with driving feature of product grade B
60.60 ISO/TC 2/SC 11
ISO 4757:1983
Cross recesses for screws
90.93 ISO/TC 2/SC 13
ISO 4759-1:2000
Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
90.93 ISO/TC 2/SC 7
ISO 4762:2004
Hexagon socket head cap screws
90.93 ISO/TC 2/SC 11
ISO 4766:2011
Slotted set screws with flat point
60.60 ISO/TC 2/SC 11
ISO 6157-1:1988
Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements
90.93 ISO/TC 2/SC 7
ISO 6157-3:1988
Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements
90.93 ISO/TC 2/SC 7
ISO 7045:2011
Pan head screws with type H or type Z cross recess -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 7046-1:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess -- Product grade A -- Part 1: Steel screws of property class 4.8
60.60 ISO/TC 2/SC 11
ISO 7046-2:2011
Countersunk flat head screws (common head style) with type H or type Z cross recess -- Product grade A -- Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
60.60 ISO/TC 2/SC 11
ISO 7047:2011
Raised countersunk head screws (common head style) with type H or type Z cross recess -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 7048:2011
Cross-recessed cheese head screws
60.60 ISO/TC 2/SC 11
ISO 7049:2011
Cross-recessed pan head tapping screws
60.60 ISO/TC 2/SC 13
ISO 7050:2011
Cross-recessed countersunk (flat) head tapping screws
60.60 ISO/TC 2/SC 13
ISO 7051:2011
Cross-recessed raised countersunk (oval) head tapping screws
60.60 ISO/TC 2/SC 13
ISO 7053:2011
Hexagon washer head tapping screws
60.60 ISO/TC 2/SC 13
ISO 7378:1983
Fasteners -- Bolts, screws and studs -- Split pin holes and wire holes
90.93 ISO/TC 2/SC 7
ISO 7379:1983
Hexagon socket head shoulder screws
90.93 ISO/TC 2/SC 11
ISO 7380-1:2011
Button head screws -- Part 1: Hexagon socket button head screws
60.60 ISO/TC 2/SC 11
ISO 7380-2:2011
Button head screws -- Part 2: Hexagon socket button head screws with collar
60.60 ISO/TC 2/SC 11
ISO 7434:1983
Slotted set screws with cone point
90.93 ISO/TC 2/SC 11
ISO 7435:1983
Slotted set screws with long dog point
90.93 ISO/TC 2/SC 11
ISO 7436:1983
Slotted set screws with cup point
90.93 ISO/TC 2/SC 11
ISO 7721:1983
Countersunk head screws -- Head configuration and gauging
90.93 ISO/TC 2/SC 11
ISO 7721-2:1990
Countersunk flat head screws -- Part 2: Penetration depth of cross recesses
90.93 ISO/TC 2/SC 11
ISO 8676:2011
Hexagon head screws with metric fine pitch thread -- Product grades A and B
60.60 ISO/TC 2/SC 11
ISO 8678:1988
Cup head square neck bolts with small head and short neck -- Product grade B
90.93 ISO/TC 2/SC 11
ISO 8765:2011
Hexagon head bolts with metric fine pitch thread -- Product grades A and B
60.60 ISO/TC 2/SC 11
ISO 8839:1986
Mechanical properties of fasteners -- Bolts, screws, studs and nuts made of non-ferrous metals
95.20 ISO/TC 2/SC 11
ISO 8992:2005
Fasteners -- General requirements for bolts, screws, studs and nuts
90.93 ISO/TC 2/SC 7
ISO 10509:2012
Hexagon flange head tapping screws
60.60 ISO/TC 2/SC 13
ISO 10510:2011
Tapping screw and washer assemblies with plain washers
60.60 ISO/TC 2/SC 13
ISO/NP 10642
Hexagon socket countersunk head screws
10.99 ISO/TC 2/SC 11
ISO 10642:2004
Hexagon socket countersunk head screws
90.92 ISO/TC 2/SC 11
ISO 10642:2004/Amd 1:2012
60.60 ISO/TC 2/SC 11
ISO 10664:2014
Hexalobular internal driving feature for bolts and screws
60.60 ISO/TC 2/SC 11
ISO 10666:1999
Drilling screws with tapping screw thread -- Mechanical and functional properties
90.93 ISO/TC 2/SC 13
ISO 12474:2010
Hexagon socket head cap screws with metric fine pitch thread
60.60 ISO/TC 2/SC 11
ISO/NP 13918
Welding -- Studs and ceramic ferrules for arc stud welding
10.99 ISO/TC 44/SC 10
ISO 13918:2008
Welding -- Studs and ceramic ferrules for arc stud welding
90.92 ISO/TC 44/SC 10
ISO 14579:2011
Hexalobular socket head cap screws
60.60 ISO/TC 2/SC 11
ISO 14580:2011
Hexalobular socket cheese head screws
60.60 ISO/TC 2/SC 11
ISO 14581:2013
Fasteners -- Hexalobular socket countersunk flat head screws
60.60 ISO/TC 2/SC 11
ISO 14582:2013
Fasteners -- Hexalobular socket countersunk head screws, high head
60.60 ISO/TC 2/SC 11
ISO 14583:2011
Hexalobular socket pan head screws
60.60 ISO/TC 2/SC 11
ISO 14584:2011
Hexalobular socket raised countersunk head screws
60.60 ISO/TC 2/SC 11
ISO 14585:2011
Hexalobular socket pan head tapping screws
60.60 ISO/TC 2/SC 13
ISO 14586:2011
Hexalobular socket countersunk head tapping screws
60.60 ISO/TC 2/SC 13
ISO 14587:2011
Hexalobular socket raised countersunk (oval) head tapping screws
60.60 ISO/TC 2/SC 13
ISO 15065:2005
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
90.93 ISO/TC 2/SC 7
ISO 15071:2011
Hexagon bolts with flange -- Small series -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 15072:2012
Hexagon bolts with flange with metric fine pitch thread -- Small series -- Product grade A
60.60 ISO/TC 2/SC 11
ISO 15480:1999
Hexagon washer head drilling screws with tapping screw thread
90.93 ISO/TC 2/SC 13
ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread
90.93 ISO/TC 2/SC 13
ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread
90.93 ISO/TC 2/SC 13
ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread
90.93 ISO/TC 2/SC 13
ISO 23429:2004
Gauging of hexagon sockets
90.93 ISO/TC 2/SC 11