IIW - International Institute of Welding
Items to be displayed:
Standards and projects under the direct responsibility of IIW Secretariat and its SCs
| Standard and/or project | ICS | TC | |
|---|---|---|---|
| ISO 3580:2004 Welding consumables -- Covered electrodes for manual metal arc welding of creep-resisting steels -- Classification | 90.92 | 25.160.20 | IIW |
| ISO 3690:2000 Welding and allied processes -- Determination of hydrogen content in ferritic steel arc weld metal | 90.92 | 25.160.40 | IIW |
| ISO 6847:2000 Welding consumables -- Deposition of a weld metal pad for chemical analysis | 90.93 | 25.160.20 | IIW |
| ISO 8249:2000 Welding -- Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals | 90.93 | 25.160.40 | IIW |
| ISO 10447:2006 Resistance welding -- Peel and chisel testing of resistance spot and projection welds | 90.60 | 25.160.40 | IIW |
| ISO/TR 13393:2009 Welding consumables -- Hardfacing classification -- Microstructures | 60.60 | 25.160.20 | IIW |
| ISO 14270:2000 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds | 90.20 | 25.160.40 | IIW |
| ISO 14271:2000 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) | 90.92 | 25.160.40 | IIW |
| ISO 14272:2000 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds | 90.20 | 25.160.40 | IIW |
| ISO 14273:2000 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds | 90.20 | 25.160.40 | IIW |
| ISO 14323:2006 Resistance spot welding and projection welds -- Destructive testing of welds -- Specimen dimensions and procedure for impact shear test and cross-tension testing | 90.60 | 25.160.40 | IIW |
| ISO 14324:2003 Resistance spot welding -- Destructive tests of welds -- Method for the fatigue testing of spot welded joints | 90.60 | 25.160.40 | IIW |
| ISO 14329:2003 Resistance welding -- Destructive tests of welds -- Failure types and geometric measurements for resistance spot, seam and projection welds | 90.60 | 25.160.40 | IIW |
| ISO 14344:2002 Welding and allied processes -- Flux and gas shielded electrical welding processes -- Procurement guidelines for consumables | 90.92 | 25.160.20 | IIW |
| ISO 14347:2008 Fatigue -- Design procedure for welded hollow-section joints -- Recommendations | 60.60 | 25.160.40 | IIW |
| ISO 14372:2000 Welding consumables -- Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen | 90.92 | 25.160.20 | IIW |
| ISO 14373:2006 Resistance welding -- Procedure for spot welding of uncoated and coated low carbon steels | 90.60 | 25.160.10 | IIW |
| ISO 16432:2006 Resistance welding -- Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) | 90.60 | 25.160.10 | IIW |
| ISO 16433:2006 Resistance welding -- Procedure for seam welding of uncoated and coated low carbon steels | 90.60 | 25.160.10 | IIW |
| ISO/TR 22824:2003 Welding consumables -- Predicted and measured FN in specifications -- A position statement of the experts of IIW Commission IX | 60.60 | 25.160.10 | IIW |
| ISO 24497-1:2007 Non-destructive testing -- Metal magnetic memory -- Part 1: Vocabulary | 90.20 | 25.160.40 01.040.25 | IIW |
| ISO 24497-2:2007 Non-destructive testing -- Metal magnetic memory -- Part 2: General requirements | 90.20 | 25.160.40 | IIW |
| ISO 24497-3:2007 Non-destructive testing -- Metal magnetic memory -- Part 3: Inspection of welded joints | 90.20 | 25.160.40 | IIW |
News feeds
