Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 1:2002 Geometrical Product Specifications (GPS) -- Standard reference temperature for geometrical product specification and verification | 90.60 | 17.040.01 |
| ISO 286-1:2010 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 1: Basis of tolerances, deviations and fits | 60.60 | 17.040.10 |
| ISO 286-1:2010/Cor 1 | 60.00 | 17.040.10 |
| ISO 286-2:2010 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts | 60.60 | 17.040.10 |
| ISO 286-2:2010/Cor 1 | 60.00 | 17.040.10 |
| ISO 463:2006 Geometrical Product Specifications (GPS) -- Dimensional measuring equipment -- Design and metrological characteristics of mechanical dial gauges | 90.93 | 17.040.30 |
| ISO 463:2006/Cor 1:2007 | 60.60 | 17.040.30 |
| ISO 463:2006/Cor 2:2009 | 60.60 | 17.040.30 |
| ISO 1101:2012 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out | 60.60 | 01.100.20 17.040.10 |
| ISO 1101:2012/Cor 1:2013 | 60.60 | 01.100.20 17.040.10 |
| ISO 1101:2012/DAmd 1 | 40.20 | 17.040.10 01.100.20 |
| ISO 1119:2011 Geometrical product specifications (GPS) -- Series of conical tapers and taper angles | 60.60 | 17.040.01 |
| ISO 1302:2002 Geometrical Product Specifications (GPS) -- Indication of surface texture in technical product documentation | 90.93 | 01.100.20 17.040.20 |
| ISO/CD 1660 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Profile tolerancing | 30.00 | 01.100.20 |
| ISO 1660:1987 Technical drawings -- Dimensioning and tolerancing of profiles | 90.92 | 01.100.20 |
| ISO/R 1938:1971 ISO system of limits and fits -- Part II : Inspection of plain workpieces | 90.92 | 17.040.10 |
| ISO/DIS 1938-1 Geometrical product specifications (GPS) - Dimensional measuring equipment -- Part 1: Plain limit gauges of linear size | 40.99 | 17.040.10 |
| ISO 2538:1998 Geometrical Product Specifications (GPS) -- Series of angles and slopes on prisms | 90.92 | 17.040.01 |
| ISO 2538-1 Geometrical product specifications (GPS) -- Wedges -- Part 1: Series of angles and slopes | 60.00 | 17.040.01 |
| ISO/FDIS 2538-2 Geometrical product specifications (GPS) -- Wedges -- Part 2: Dimensioning and tolerancing | 50.92 | 17.040.01 |
| ISO 2692:2006 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) | 90.92 | 01.100.20 |
| ISO/DIS 2692 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) | 40.60 | 01.100.20 |
| ISO 2768-1:1989 General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications | 90.93 | 17.040.10 |
| ISO 2768-2:1989 General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications | 90.93 | 17.040.10 |
| ISO 3040:2009 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones | 60.60 | 01.100.20 |
| ISO 3040:2009/DAmd 1 | 40.60 | 01.100.20 |
| ISO 3274:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments | 90.93 | 17.040.30 |
| ISO 3274:1996/Cor 1:1998 | 60.60 | 17.040.30 |
| ISO 3611:2010 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Micrometers for external measurements -- Design and metrological characteristics | 60.60 | 17.040.30 |
| ISO 3650:1998 Geometrical Product Specifications (GPS) -- Length standards -- Gauge blocks | 90.93 | 17.040.30 |
| ISO 3650:1998/Cor 1:2008 | 60.60 | 17.040.30 |
| ISO 4287:1997 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Terms, definitions and surface texture parameters | 90.60 | 17.040.20 01.040.17 |
| ISO 4287:1997/Cor 1:1998 | 60.60 | 17.040.20 01.040.17 |
| ISO 4287:1997/Amd 1:2009 Peak count number | 60.60 | 17.040.20 01.040.17 |
| ISO 4287:1997/DAmd 2 Parameters Xsm and Xc | 40.20 | 01.040.17 17.040.20 |
| ISO 4287:1997/Cor 2:2005 | 60.60 | 17.040.20 01.040.17 |
| ISO 4288:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Rules and procedures for the assessment of surface texture | 90.93 | 17.040.20 |
| ISO 4288:1996/Cor 1:1998 | 60.60 | 17.040.20 |
| ISO 4291:1985 Methods for the assessement of departure from roundness -- Measurement of variations in radius | 90.93 | 17.040.20 |
| ISO 5436-1:2000 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures | 90.60 | 17.040.30 |
| ISO 5436-2:2012 Geometrical product specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 2: Software measurement standards | 60.60 | 17.040.30 |
| ISO 5458:1998 Geometrical Product Specifications (GPS) -- Geometrical tolerancing -- Positional tolerancing | 90.93 | 17.040.10 |
| ISO 5459:2011 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum systems | 60.60 | 17.040.10 01.100.20 |
| ISO/TR 5460:1985 Technical drawings -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out -- Verification principles and methods -- Guidelines | 90.20 | 01.100.20 |
| ISO 7863:1984 Height setting micrometers and riser blocks | 90.93 | 17.040.30 |
| ISO 8015:2011 Geometrical product specifications (GPS) -- Fundamentals -- Concepts, principles and rules | 60.60 | 01.100.20 |
| ISO 8062:1994 Castings -- System of dimensional tolerances and machining allowances | 90.92 | 17.040.10 |
| ISO 8062-1:2007 Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 1: Vocabulary | 90.93 | 17.040.10 01.040.17 |
| ISO/TS 8062-2 Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 2: Rules | 60.00 | 17.040.10 |
| ISO 8062-3:2007 Geometrical product specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 3: General dimensional and geometrical tolerances and machining allowances for castings | 90.93 | 17.040.10 |
| ISO 8062-3:2007/Cor 1:2009 | 60.60 | 17.040.10 |
| ISO/WD 8062-4 Geometrical Product Specifications (GPS) -- Dimensional and geometrical tolerances for moulded parts -- Part 4: General tolerances for castings (according to the GPS rules) | 20.20 | 17.040.10 |
| ISO 8512-1:1990 Surface plates -- Part 1: Cast iron | 90.93 | 17.040.30 |
| ISO 8512-2:1990 Surface plates -- Part 2: Granite | 90.93 | 17.040.30 |
| ISO 8785:1998 Geometrical Product Specification (GPS) -- Surface imperfections -- Terms, definitions and parameters | 90.93 | 01.040.17 17.040.20 |
| ISO 9493:2010 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Dial test indicators (lever type) -- Design and metrological characteristics | 60.60 | 17.040.30 |
| ISO 10135:2007 Geometrical product specifications (GPS) -- Drawing indications for moulded parts in technical product documentation (TPD) | 90.93 | 01.100.20 |
| ISO 10360-1:2000 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 1: Vocabulary | 90.60 | 01.040.17 17.040.30 |
| ISO 10360-1:2000/Cor 1:2002 | 60.60 | 01.040.17 17.040.30 |
| ISO 10360-2:2009 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 2: CMMs used for measuring linear dimensions | 60.60 | 17.040.30 |
| ISO 10360-3:2000 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 3: CMMs with the axis of a rotary table as the fourth axis | 90.93 | 17.040.30 |
| ISO 10360-4:2000 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 4: CMMs used in scanning measuring mode | 90.60 | 17.040.30 |
| ISO 10360-4:2000/Cor 1:2002 | 60.60 | 17.040.30 |
| ISO 10360-5:2010 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 5: CMMs using single and multiple stylus contacting probing systems | 60.60 | 17.040.30 |
| ISO 10360-6:2001 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features | 90.93 | 17.040.30 |
| ISO 10360-6:2001/Cor 1:2007 | 60.60 | 17.040.30 |
| ISO 10360-7:2011 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 7: CMMs equipped with imaging probing systems | 60.60 | 17.040.30 |
| ISO/DIS 10360-8.2 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMM) -- Part 8: CMMs with optical distance sensors | 40.99 | 17.040.30 |
| ISO 10360-9 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 9: CMMs with multiple probing systems | 60.00 | 17.040.30 |
| ISO/DIS 10360-10 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 10: Laser trackers for measuring point-to-point distances | 40.60 | 17.040.30 |
| ISO 10579:2010 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Non-rigid parts | 60.60 | 01.100.20 |
| ISO 10579:2010/Cor 1:2011 | 60.60 | 01.100.20 |
| ISO 12085:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Motif parameters | 90.93 | 17.040.20 |
| ISO 12085:1996/Cor 1:1998 | 60.60 | 17.040.20 |
| ISO 12179:2000 Geometrical Product Specifications (GPS) -- Surface texture: Profile method -- Calibration of contact (stylus) instruments | 90.60 | 17.040.30 |
| ISO 12179:2000/Cor 1:2003 | 60.60 | 17.040.30 |
| ISO 12180-1:2011 Geometrical product specifications (GPS) -- Cylindricity -- Part 1: Vocabulary and parameters of cylindrical form | 60.60 | 17.040.20 01.040.17 |
| ISO 12180-2:2011 Geometrical product specifications (GPS) -- Cylindricity -- Part 2: Specification operators | 60.60 | 17.040.20 |
| ISO 12181-1:2011 Geometrical product specifications (GPS) -- Roundness -- Part 1: Vocabulary and parameters of roundness | 60.60 | 17.040.20 01.040.17 |
| ISO 12181-2:2011 Geometrical product specifications (GPS) -- Roundness -- Part 2: Specification operators | 60.60 | 17.040.20 |
| ISO 12780-1:2011 Geometrical product specifications (GPS) -- Straightness -- Part 1: Vocabulary and parameters of straightness | 60.60 | 01.040.17 17.040.20 |
| ISO 12780-2:2011 Geometrical product specifications (GPS) -- Straightness -- Part 2: Specification operators | 60.60 | 17.040.20 |
| ISO 12781-1:2011 Geometrical product specifications (GPS) -- Flatness -- Part 1: Vocabulary and parameters of flatness | 60.60 | 01.040.17 17.040.20 |
| ISO 12781-2:2011 Geometrical product specifications (GPS) -- Flatness -- Part 2: Specification operators | 60.60 | 17.040.20 |
| ISO 13102:2012 Geometrical product specifications (GPS) -- Dimensional measuring equipment: Electronic digital-indicator gauge -- Design and metrological characteristics | 60.60 | 17.040.30 |
| ISO 13225:2012 Geometrical product specifications (GPS) -- Dimensional measuring equipment; Height gauges -- Design and metrological characteristics | 60.60 | 17.040.30 |
| ISO 13385-1:2011 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 1: Callipers; Design and metrological characteristics | 60.60 | 17.040.30 |
| ISO 13385-2:2011 Geometrical product specifications (GPS) -- Dimensional measuring equipment -- Part 2: Calliper depth gauges; Design and metrological characteristics | 60.60 | 17.040.30 |
| ISO 13565-1:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 1: Filtering and general measurement conditions | 90.93 | 17.040.20 |
| ISO 13565-1:1996/Cor 1:1998 | 60.60 | 17.040.20 |
| ISO 13565-2:1996 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 2: Height characterization using the linear material ratio curve | 90.93 | 17.040.20 |
| ISO 13565-2:1996/Cor 1:1998 | 60.60 | 17.040.20 |
| ISO 13565-3:1998 Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Surfaces having stratified functional properties -- Part 3: Height characterization using the material probability curve | 90.93 | 17.040.20 |
| ISO 14253-1:1998 Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformance or non-conformance with specifications | 90.92 | 17.040.01 |
| ISO/FDIS 14253-1 Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 1: Decision rules for proving conformity or nonconformity with specifications | 50.60 | 17.040.01 |
| ISO 14253-2:2011 Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification | 60.60 | 17.040.01 |
| ISO 14253-2:2011/Cor 1 | 60.00 | 17.040.01 |
| ISO 14253-3:2011 Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 3: Guidelines for achieving agreements on measurement uncertainty statements | 60.60 | 17.040.01 |
| ISO/TS 14253-4:2010 Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 4: Background on functional limits and specification limits in decision rules | 90.20 | 17.040.01 |
| ISO/DIS 14253-5 Geometrical Product Specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 5: Uncertainty in testing indicating measuring instruments | 40.00 | 17.040.01 |
| ISO/TR 14253-6:2012 Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces | 60.60 | 17.040.01 |
| ISO 14405-1:2010 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes | 60.60 | 17.040.10 |
| ISO 14405-1:2010/DAmd 1 | 40.60 | 17.040.10 |
| ISO 14405-2:2011 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes | 60.60 | 17.040.10 |
| ISO/DIS 14405-3 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 3: Angular sizes | 40.00 | 17.040.10 |
| ISO 14406:2010 Geometrical product specifications (GPS) -- Extraction | 60.60 | 17.040.01 |
| ISO/TR 14638:1995 Geometrical product specification (GPS) -- Masterplan | 90.92 | 17.040.01 |
| ISO/DIS 14638 Geometrical product specifications (GPS) -- Masterplan | 40.60 | 17.040.01 |
| ISO 14660-2:1999 Geometrical Product Specifications (GPS) -- Geometrical features -- Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature | 90.93 | 01.100.20 17.040.01 |
| ISO 14978:2006 Geometrical product specifications (GPS) -- General concepts and requirements for GPS measuring equipment | 90.93 | 17.040.30 |
| ISO 14978:2006/Cor 1:2008 | 60.60 | 17.040.30 |
| ISO/TS 15530-1 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 1: Overview and metrological characteristics | 60.00 | 17.040.30 |
| ISO 15530-3:2011 Geometrical product specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 3: Use of calibrated workpieces or measurement standards | 60.60 | 17.040.30 |
| ISO/TS 15530-4:2008 Geometrical Product Specifications (GPS) -- Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement -- Part 4: Evaluating task-specific measurement uncertainty using simulation | 90.93 | 17.040.30 |
| ISO/TR 16015:2003 Geometrical product specifications (GPS) -- Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences | 90.93 | 17.040.01 |
| ISO/TS 16610-1:2006 Geometrical product specifications (GPS) -- Filtration -- Part 1: Overview and basic concepts | 90.92 | 17.040.20 |
| ISO/DIS 16610-1 Geometrical product specifications (GPS) -- Filtration -- Part 1: Overview and basic concepts | 40.99 | 17.040.20 |
| ISO/TS 16610-20:2006 Geometrical product specifications (GPS) -- Filtration -- Part 20: Linear profile filters: Basic concepts | 90.92 | 17.040.20 |
| ISO/DIS 16610-20 Geometrical product specifications (GPS) -- Filtration -- Part 20: Linear profile filters: Basic concepts | 40.99 | 17.040.20 |
| ISO 16610-21:2011 Geometrical product specifications (GPS) -- Filtration -- Part 21: Linear profile filters: Gaussian filters | 60.60 | 17.040.20 |
| ISO/TS 16610-22:2006 Geometrical product specifications (GPS) -- Filtration -- Part 22: Linear profile filters: Spline filters | 90.92 | 17.040.20 |
| ISO/DIS 16610-22 Geometrical product specifications (GPS) -- Filtration -- Part 22: Linear profile filters: Spline filters | 40.99 | 17.040.20 |
| ISO/TS 16610-28:2010 Geometrical product specifications (GPS) -- Filtration -- Part 28: Profile filters: End effects | 60.60 | 17.040.20 |
| ISO/TS 16610-29:2006 Geometrical product specifications (GPS) -- Filtration -- Part 29: Linear profile filters: Spline wavelets | 90.92 | 17.040.20 |
| ISO/DIS 16610-29 Geometrical product specifications (GPS) -- Filtration -- Part 29: Linear profile filters: Spline wavelets | 40.99 | 17.040.20 |
| ISO/DIS 16610-30 Geometrical product specifications (GPS) -- Filtration -- Part 30: Robust profile filters: Basic concepts | 40.60 | 17.040.20 |
| ISO/TS 16610-30:2009 Geometrical product specifications (GPS) -- Filtration -- Part 30: Robust profile filters: Basic concepts | 90.92 | 17.040.20 |
| ISO/TS 16610-31:2010 Geometrical product specifications (GPS) -- Filtration -- Part 31: Robust profile filters: Gaussian regression filters | 60.60 | 17.040.20 |
| ISO/DIS 16610-32 Geometrical product specifications (GPS) -- Filtration -- Part 32: Robust profile filters: Spline filters | 40.60 | 17.040.20 |
| ISO/TS 16610-32:2009 Geometrical product specifications (GPS) -- Filtration -- Part 32: Robust profile filters: Spline filters | 90.92 | 17.040.20 |
| ISO/TS 16610-40:2006 Geometrical product specifications (GPS) -- Filtration -- Part 40: Morphological profile filters: Basic concepts | 90.92 | 17.040.20 |
| ISO/DIS 16610-40 Geometrical product specifications (GPS) -- Filtration -- Part 40: Morphological profile filters: Basic concepts | 40.99 | 17.040.20 |
| ISO/DIS 16610-41 Geometrical product specifications (GPS) -- Filtration -- Part 41: Morphological profile filters: Disk and horizontal line-segment filters | 40.99 | 17.040.20 |
| ISO/TS 16610-41:2006 Geometrical product specifications (GPS) -- Filtration -- Part 41: Morphological profile filters: Disk and horizontal line-segment filters | 90.92 | 17.040.20 |
| ISO/DIS 16610-49 Geometrical product specifications (GPS) -- Filtration -- Part 49: Morphological profile filters: Scale space techniques | 40.99 | 17.040.20 |
| ISO/TS 16610-49:2006 Geometrical product specifications (GPS) -- Filtration -- Part 49: Morphological profile filters: Scale space techniques | 90.92 | 17.040.20 |
| ISO/DIS 16610-60 Geometrical Product Specification (GPS) -- Filtration -- Part 60: Linear areal filters -- Basic concepts | 40.60 | 17.040.20 |
| ISO/DIS 16610-61 Geometrical Product Specification (GPS) -- Filtration -- Part 61: Linear areal filters -- Gaussian filters | 40.60 | 17.040.20 |
| ISO/DIS 16610-71 Geometrical product specifications (GPS) -- Filtration -- Part 71: Robust areal filters: Gaussian regression filters | 40.99 | 17.040.20 |
| ISO 16610-85:2013 Geometrical product specifications (GPS) -- Filtration -- Part 85: Morphological areal filters: Segmentation | 60.60 | 17.040.20 |
| ISO 17450-1:2011 Geometrical product specifications (GPS) -- General concepts -- Part 1: Model for geometrical specification and verification | 60.60 | 17.040.01 |
| ISO 17450-2:2012 Geometrical product specifications (GPS) -- General concepts -- Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities | 60.60 | 17.040.01 |
| ISO/CD 17450-3 Geometrical product specifications (GPS) -- General concepts -- Part 3: Toleranced features | 30.99 | 17.040.01 |
| ISO/CD 17450-4 Geometrical product specification (GPS) -- Basic concepts -- Part 4: Geometrical characteristics | 30.00 | 17.040.01 |
| ISO/TS 17863:2013 Geometrical product specification (GPS) -- Geometrical tolerancing of moveable assemblies | 60.60 | 17.040.01 |
| ISO/CD 17865 Geometrical Product Specifications (GPS) -- Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems | 30.99 | 17.040.01 |
| ISO/CD 18183-1 Geometrical product specifications (GPS) -- Partioning -- Part 1: Basic concepts | 30.99 | 17.040.01 |
| ISO/CD 18183-2 Geometrical product specifications (GPS) -- Partioning -- Part 2: Nominal model | 30.99 | 17.040.01 |
| ISO/CD 18183-3 Geometrical product specifications (GPS) -- Partioning -- Part 3: Methods used for specification and verification | 30.99 | 17.040.01 |
| ISO/CD 18391 Geometrical product specification (GPS) -- Population specification | 30.99 | 17.040.01 |
| ISO 22432:2011 Geometrical product specifications (GPS) -- Features utilized in specification and verification | 60.60 | 17.040.01 |
| ISO/TS 23165:2006 Geometrical product specifications (GPS) -- Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty | 90.60 | 17.020 |
| ISO/TR 23605:2009 Technical product specification (TPS) -- Application guidance -- International model for national implementation | 60.60 | 01.100.01 |
| ISO/DIS 25178-1 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 1: Indication of surface texture | 40.20 | 17.040.20 |
| ISO 25178-2:2012 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 2: Terms, definitions and surface texture parameters | 60.60 | 17.040.20 |
| ISO 25178-3:2012 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 3: Specification operators | 60.60 | 17.040.20 |
| ISO 25178-6:2010 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 6: Classification of methods for measuring surface texture | 60.60 | 17.040.20 |
| ISO/DIS 25178-70 Geometrical product specification (GPS) -- Surface texture: Areal -- Part 70: Physical measurement standards | 40.99 | 17.040.20 |
| ISO 25178-71:2012 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 71: Software measurement standards | 60.60 | 17.040.20 |
| ISO/CD 25178-72 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 72: XML file format x3p | 30.99 | 17.040.20 |
| ISO 25178-601:2010 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 601: Nominal characteristics of contact (stylus) instruments | 60.60 | 17.040.20 |
| ISO 25178-602:2010 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments | 60.60 | 17.040.20 |
| ISO/FDIS 25178-603 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments | 50.20 | 17.040.20 |
| ISO 25178-604 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments | 60.00 | 17.040.20 |
| ISO/DIS 25178-605 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments | 40.99 | 17.040.20 |
| ISO/DIS 25178-606 Geometrical product specification (GPS) -- Surface texture: Areal -- Part 606: Nominal characteristics of non-contact (focus variation) instruments | 40.60 | 17.040.20 |
| ISO 25178-701:2010 Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 701: Calibration and measurement standards for contact (stylus) instruments | 60.60 | 17.040.20 |
| ISO 25378:2011 Geometrical product specifications (GPS) -- Characteristics and conditions -- Definitions | 60.60 | 17.040.01 |
