Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 148-1:2009 Metallic materials -- Charpy pendulum impact test -- Part 1: Test method | 90.92 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 148-2:2008 Metallic materials -- Charpy pendulum impact test -- Part 2: Verification of testing machines | 90.92 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 148-3:2008 Metallic materials -- Charpy pendulum impact test -- Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines | 90.92 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 204:2009 Metallic materials -- Uniaxial creep testing in tension -- Method of test | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 376:2011 Metallic materials -- Calibration of force-proving instruments used for the verification of uniaxial testing machines | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 1099:2006 Metallic materials -- Fatigue testing -- Axial force-controlled method | 90.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 1143:2010 Metallic materials -- Rotating bar bending fatigue testing | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 1352:2011 Metallic materials -- Torque-controlled fatigue testing | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 3785:2006 Metallic materials -- Designation of test specimen axes in relation to product texture | 90.93 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 4545-1:2005 Metallic materials -- Knoop hardness test -- Part 1: Test method | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 4545-2:2005 Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machines | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 4545-3:2005 Metallic materials -- Knoop hardness test -- Part 3: Calibration of reference blocks | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 4545-4:2005 Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 4965-1:2012 Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 1: Testing systems | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 4965-2:2012 Metallic materials -- Dynamic force calibration for uniaxial fatigue testing -- Part 2: Dynamic calibration device (DCD) instrumentation | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 6506-1:2005 Metallic materials -- Brinell hardness test -- Part 1: Test method | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6506-2:2005 Metallic materials -- Brinell hardness test -- Part 2: Verification and calibration of testing machines | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6506-3:2005 Metallic materials -- Brinell hardness test -- Part 3: Calibration of reference blocks | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6506-4:2005 Metallic materials -- Brinell hardness test -- Part 4: Table of hardness values | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6507-1:2005 Metallic materials -- Vickers hardness test -- Part 1: Test method | 90.93 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6507-2:2005 Metallic materials -- Vickers hardness test -- Part 2: Verification and calibration of testing machines | 90.93 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6507-3:2005 Metallic materials -- Vickers hardness test -- Part 3: Calibration of reference blocks | 90.93 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6507-4:2005 Metallic materials -- Vickers hardness test -- Part 4: Tables of hardness values | 90.93 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6508-1:2005 Metallic materials -- Rockwell hardness test -- Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6508-2:2005 Metallic materials -- Rockwell hardness test -- Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6508-3:2005 Metallic materials -- Rockwell hardness test -- Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 6892-1:2009 Metallic materials -- Tensile testing -- Part 1: Method of test at room temperature | 90.92 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 6892-2:2011 Metallic materials -- Tensile testing -- Part 2: Method of test at elevated temperature | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 7438:2005 Metallic materials -- Bend test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7500-1:2004 Metallic materials -- Verification of static uniaxial testing machines -- Part 1: Tension/compression testing machines -- Verification and calibration of the force-measuring system | 90.92 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 7500-1:2004/Cor 1:2008 | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 7500-2:2006 Metallic materials -- Verification of static uniaxial testing machines -- Part 2: Tension creep testing machines -- Verification of the applied force | 90.93 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 7799:1985 Metallic materials -- Sheet and strip 3 mm thick or less -- Reverse bend test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7800:2012 Metallic materials -- Wire -- Simple torsion test | 60.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7801:1984 Metallic materials -- Wire -- Reverse bend test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 7802:1983 Metallic materials -- Wire -- Wrapping test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8491:1998 Metallic materials -- Tube (in full section) -- Bend test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8492:1998 Metallic materials -- Tube -- Flattening test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8493:1998 Metallic materials -- Tube -- Drift-expanding test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8494:1998 Metallic materials -- Tube -- Flanging test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8495:1998 Metallic materials -- Tube -- Ring-expanding test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 8496:1998 Metallic materials -- Tube -- Ring tensile test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 9513:2012 Metallic materials -- Calibration of extensometer systems used in uniaxial testing | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 9513:2012/Cor 1:2013 | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 9649:1990 Metallic materials -- Wire -- Reverse torsion test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 10113:2006 Metallic materials -- Sheet and strip -- Determination of plastic strain ratio | 90.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 10275:2007 Metallic materials -- Sheet and strip -- Determination of tensile strain hardening exponent | 90.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 11531:1994 Metallic materials -- Earing test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 12004-1:2008 Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 12004-2:2008 Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 12106:2003 Metallic materials -- Fatigue testing -- Axial-strain-controlled method | 90.20 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 12107:2012 Metallic materials -- Fatigue testing -- Statistical planning and analysis of data | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 12108:2012 Metallic materials -- Fatigue testing -- Fatigue crack growth method | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 12111:2011 Metallic materials -- Fatigue testing -- Strain-controlled thermomechanical fatigue testing method | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 12135:2002 Metallic materials -- Unified method of test for the determination of quasistatic fracture toughness | 90.92 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 12135:2002/Cor 1:2008 | 60.60 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO/TR 12735-2:1996 Mechanical testing of metals -- Symbols used with their definitions -- Part 2: Recommendations for the development of symbols and definitions | 60.60 | 77.040.10 01.040.77 | ISO/TC 164 |
| ISO 13314:2011 Mechanical testing of metals -- Ductility testing -- Compression test for porous and cellular metals | 60.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 14556:2000 Steel -- Charpy V-notch pendulum impact test -- Instrumented test method | 90.92 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 14556:2000/Amd 1:2006 Annex D -- Instrumented Charpy V-notch pendulum impact test of sub-size test pieces | 60.60 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 14577-1:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 1: Test method | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 14577-2:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 2: Verification and calibration of testing machines | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 14577-3:2002 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 3: Calibration of reference blocks | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 14577-4:2007 Metallic materials -- Instrumented indentation test for hardness and materials parameters -- Part 4: Test method for metallic and non-metallic coatings | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO/TR 14936:1998 Metallic materials -- Strain analysis report | 90.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 15363:2000 Metallic materials -- Tube ring hydraulic pressure test | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 15579:2000 Metallic materials -- Tensile testing at low temperature | 90.92 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 15653:2010 Metallic materials -- Method of test for the determination of quasistatic fracture toughness of welds | 60.60 | 25.160.40 | ISO/TC 164/SC 4 |
| ISO 16630:2009 Metallic materials -- Sheet and strip -- Hole expanding test | 60.60 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 18265:2003 Metallic materials -- Conversion of hardness values | 90.92 | 77.040.10 | ISO/TC 164/SC 3 |
| ISO 19819:2004 Metallic materials -- Tensile testing in liquid helium | 90.92 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 20032:2007 Method for evaluation of tensile properties of metallic superplastic materials | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 20482:2003 Metallic materials -- Sheet and strip -- Erichsen cupping test | 90.92 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO 22889:2007 Metallic materials -- Method of test for the determination of resistance to stable crack extension using specimens of low constraint | 90.92 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO 23718:2007 Metallic materials -- Mechanical testing -- Vocabulary | 90.93 | 77.040.10 01.040.77 | ISO/TC 164 |
| ISO 23788:2012 Metallic materials -- Verification of the alignment of fatigue testing machines | 60.60 | 77.040.10 | ISO/TC 164/SC 5 |
| ISO 24213:2008 Metallic materials -- Sheet and strip -- Method for springback evaluation in stretch bending | 90.93 | 77.040.10 | ISO/TC 164/SC 2 |
| ISO/TR 25679:2005 Mechanical testing of metals -- Symbols and definitions in published standards | 90.60 | 01.040.77 77.040.10 | ISO/TC 164 |
| ISO 26203-1:2010 Metallic materials -- Tensile testing at high strain rates -- Part 1: Elastic-bar-type systems | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 26203-2:2011 Metallic materials -- Tensile testing at high strain rates -- Part 2: Servo-hydraulic and other test systems | 60.60 | 77.040.10 | ISO/TC 164/SC 1 |
| ISO 27306:2009 Metallic materials -- Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components | 60.60 | 77.040.10 | ISO/TC 164/SC 4 |
| ISO/TR 29381:2008 Metallic materials -- Measurement of mechanical properties by an instrumented indentation test -- Indentation tensile properties | 90.93 | 77.040.10 | ISO/TC 164/SC 3 |
