ISO/TC 149 - Cycles

Subcommittee	Subcommittee Title	Published standards	Standards under development
ISO/TC 149/SC 1	Cycles and major sub-assemblies	19	6

Filter :

Published

Under development

Withdrawn

Deleted

Standard and/or project under the direct responsibility of ISO/TC 149 Secretariat	Stage	ICS
ISO 6692:1981 Cycles — Marking of cycle components	90.93	43.150
ISO 6693:1981 [Withdrawn] Cycles — Cotter pin and assembly of the axle/cotter pin/crank	95.99	43.150
ISO 6695:1991 [Withdrawn] Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions	95.99	43.150
ISO 6695:2015 Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions	90.93	43.150
ISO 6696:1989 Cycles — Screw threads used in bottom bracket assemblies	90.93	43.150
ISO 6697:1994 Cycles — Hubs and freewheels — Assembly dimensions	90.93	43.150
ISO 6698:1981 [Withdrawn] Cycles — Screw threads used to assemble freewheels on bicycle hubs	95.99	43.150
ISO 6698:1989 Cycles — Screw threads used to assemble freewheels on bicycle hubs	90.93	43.150
ISO 6699:1990 [Withdrawn] Cycles — Stem and handlebar bend — Assembly dimensions	95.99	43.150
ISO 6699:2016 Cycles — Handlebar centre and stem dimensions	90.93	43.150
ISO 6701:1991 Cycles — External dimensions of spoke nipples	90.93	43.150
ISO 8488:1986 Cycles — Screw threads used to assemble head fittings on bicycle forks	90.60	43.150
ISO 8562:1990 [Withdrawn] Cycles — Stem wedge angle	95.99	43.150
ISO 8562:2022 Cycles — Stem wedge angle	60.60	43.150
ISO 10230:1990 Cycles — Splined hub and sprocket — Mating dimensions	90.93	43.150

No matching records found. Please try changing the filter settings.