Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO/DIS 7509 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of time to failure under sustained internal pressure | 40.20 | 23.040.20 |
| ISO/DIS 8513 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Test methods for the determination of the apparent initial longitudinal tensile strength | 40.60 | 23.040.20 |
| ISO 10928:2009/Amd 1 | 60.00 | 23.040.20 23.040.45 |
| ISO/DIS 10952 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Determination of the resistance to chemical attack for the inside of a section in a deflected condition | 40.00 | 23.040.45 23.040.20 |
| ISO/DTR 10986 Plasitcs piping systems for pressure and non-pressure applications -- Installation of pipes above ground -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin | 30.99 | 23.040.45 23.040.20 |
| ISO/DIS 12512 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe | 40.00 | 23.040.20 |
| ISO/WD 16611 Plastics piping systems for drainage and sewerage without pressure -- Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) -- Dimensions, requirements and tests | 20.99 | 23.040.20 91.140.80 93.030 23.040.45 |
| ISO/CD 18851 Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test method to prove the structural design of fittings | 30.20 | 23.040.20 |
