Home

Standards catalogue

Subscribe to updates

ISO/TC 138/SC 5  - General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 138/SC 5 Secretariat

Standard and/or projectStageICS
ISO 580:2005
Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating
90.93 23.040.45
ISO 1167-1:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 1: General method
90.20 23.040.20
23.040.45
ISO 1167-2:2006
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 2: Preparation of pipe test pieces
90.93 23.040.45
23.040.20
ISO 1167-3:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 3: Preparation of components
90.93 23.040.45
23.040.20
ISO 1167-4:2007
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids -- Determination of the resistance to internal pressure -- Part 4: Preparation of assemblies
90.93 23.040.20
23.040.45
ISO 2505:2005
Thermoplastics pipes -- Longitudinal reversion -- Test method and parameters
90.93 23.040.20
ISO 2507-1:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 1: General test method
90.93 23.040.20
23.040.45
ISO 2507-2:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
90.93 23.040.20
23.040.45
ISO 2507-3:1995
Thermoplastics pipes and fittings -- Vicat softening temperature -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings
90.93 23.040.20
23.040.45
ISO 3114:1977
Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -- Test method
90.93 23.040.20
91.140.60
93.025
ISO 3126:2005
Plastics piping systems -- Plastics components -- Determination of dimensions
90.93 23.040.20
ISO 3127:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Round-the-clock method
90.93 23.040.20
ISO 3213:2009
Polypropylene (PP) pipes -- Effect of time and temperature on the expected strength
90.60 23.040.20
ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings -- Specification and determination of density
90.93 23.040.20
23.040.45
ISO 4059:1978
Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements
90.93 23.040.20
ISO 4439:1979
Unplasticized polyvinyl chloride (PVC) pipes and fittings -- Determination and specification of density
90.93 23.040.20
23.040.45
ISO 6259-1:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 1: General test method
90.92 23.040.20
ISO 6259-2:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
90.93 23.040.20
ISO 6259-3:1997
Thermoplastics pipes -- Determination of tensile properties -- Part 3: Polyolefin pipes
90.92 23.040.20
ISO 6964:1986
Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method and basic specification
90.92 23.040.20
ISO 7245:1984
Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) -- General specification for moulding and extrusion materials
90.93 23.040.20
23.040.45
ISO 7246:1984
Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) -- General specification for moulding and extrusion materials
90.93 23.040.20
23.040.45
ISO 7387-1:1983
Adhesives with solvents for assembly of PVC-U pipe elements -- Characterization -- Part 1: Basic test methods
90.20 83.180
ISO 7686:2005
Plastics pipes and fittings -- Determination of opacity
90.93 23.040.20
23.040.45
ISO 8361-1:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 1: General test method
90.93 23.040.20
23.040.45
ISO 8361-2:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings
90.93 23.040.20
23.040.45
ISO 8361-3:1991
Thermoplastics pipes and fittings -- Water absorption -- Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings
90.93 23.040.20
23.040.45
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints
90.93 23.040.20
91.140.60
93.025
ISO 9080:2012
Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
60.60 23.040.20
ISO 9311-1:2005
Adhesives for thermoplastic piping systems -- Part 1: Determination of film properties
90.93 83.180
23.040.01
ISO 9311-2:2011
Adhesives for thermoplastic piping systems -- Part 2: Determination of shear strength
60.60 83.180
23.040.01
ISO 9311-3:2005
Adhesives for thermoplastic piping systems -- Part 3: Test method for the determination of resistance to internal pressure
90.93 23.040.01
83.180
ISO 9852:2007
Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method
90.93 23.040.20
ISO 9853:1991
Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test
90.93 23.040.45
ISO 9854-1:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 1: General test method
90.93 23.040.20
ISO 9854-2:1994
Thermoplastics pipes for the transport of fluids -- Determination of pendulum impact strength by the Charpy method -- Part 2: Test conditions for pipes of various materials
90.93 23.040.20
ISO 9967:2007
Thermoplastics pipes -- Determination of creep ratio
90.92 23.040.20
ISO 9969:2007
Thermoplastics pipes -- Determination of ring stiffness
90.92 23.040.20
ISO 10146:1997
Crosslinked polyethylene (PE-X) pipes -- Effect of time and temperature on the expected strength
90.93 23.040.20
ISO 10147:2011
Pipes and fittings made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
60.60 23.040.45
23.040.20
ISO 11173:1994
Thermoplastics pipes -- Determination of resistance to external blows -- Staircase method
90.93 23.040.20
ISO 11413:2008
Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
90.93 23.040.60
ISO 11414:2009
Plastics pipes and fittings -- Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
90.60 23.040.60
ISO 11673:2005
Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes -- Determination of the fracture toughness properties
90.93 23.040.20
ISO 12091:1995
Structured-wall thermoplastics pipes -- Oven test
90.93 23.040.20
ISO 12162:2009
Thermoplastics materials for pipes and fittings for pressure applications -- Classification, designation and design coefficient
90.20 23.040.20
23.040.45
ISO 12230:2012
Polybutene-1 (PB-1) pipes -- Effect of time and temperature on the expected strength
60.60 23.040.20
ISO 13056:2011
Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum
60.60 91.140.60
23.040.01
ISO 13477:2008
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Small-scale steady-state test (S4 test)
90.93 23.040.20
ISO 13478:2007
Thermoplastics pipes for the conveyance of fluids -- Determination of resistance to rapid crack propagation (RCP) -- Full-scale test (FST)
90.93 23.040.20
ISO 13479:2009
Polyolefin pipes for the conveyance of fluids -- Determination of resistance to crack propagation -- Test method for slow crack growth on notched pipes
90.60 23.040.20
ISO 13480:1997
Polyethylene pipes -- Resistance to slow crack growth -- Cone test method
90.60 23.040.20
ISO 13760:1998
Plastics pipes for the conveyance of fluids under pressure -- Miner's rule -- Calculation method for cumulative damage
90.93 23.040.20
ISO 13761:1996
Plastics pipes and fittings -- Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C
90.92 23.040.20
23.040.45
ISO 13924:2000
Plastics pipes and fittings -- Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles
90.93 23.040.45
ISO 13951:2001
Plastics piping systems -- Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading
90.92 23.040.01
ISO 13953:2001
Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
90.93 23.040.60
ISO 13954:1997
Plastics pipes and fittings -- Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
90.60 23.040.60
ISO 13955:1997
Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies
90.93 23.040.60
ISO 13956:2010
Plastics pipes and fittings -- Decohesion test of polyethylene (PE) saddle fusion joints -- Evaluation of ductility of fusion joint interface by tear test
60.60 23.040.60
ISO 13957:1997
Plastics pipes and fittings -- Polyethylene (PE) tapping tees -- Test method for impact resistance
90.93 23.040.45
ISO 13967:2009
Thermoplastics fittings -- Determination of ring stiffness
90.20 23.040.45
ISO 13968:2008
Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility
90.93 23.040.20
ISO 15853:1999
Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
90.93 23.040.01
83.080.20
ISO 15908:2002
Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives
90.93 83.180
ISO 16241:2005
Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)
90.93 23.040.20
23.040.45
ISO/TS 16479:2012
Thermoplastics pipes for the conveyance of fluids -- Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)
60.60 23.040.20
ISO 16871:2003
Plastics piping and ducting systems -- Plastics pipes and fittings -- Method for exposure to direct (natural) weathering
90.93 23.040.20
23.040.45
ISO/TR 16913:1999
Plastics pipes and fittings -- Definitions of types of test
90.93 23.040.20
23.040.45
ISO 17454:2006
Plastics piping systems -- Multilayer pipes -- Test method for the adhesion of the different layers using a pulling rig
90.20 23.040.20
ISO 17455:2005
Plastics piping systems -- Multilayer pipes -- Determination of the oxygen permeability of the barrier pipe
90.20 23.040.20
ISO 17455:2005/Cor 1:2007
60.60 23.040.20
ISO 17456:2006
Plastics piping systems -- Multilayer pipes -- Determination of long-term strength
90.93 23.040.20
ISO/TR 18124:2006
Plastics piping systems -- Multilayer M (metal) pipes -- Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone
90.93 23.040.20
ISO 18373-1:2007
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 1: Measurement of the processing temperature
90.93 23.040.20
ISO 18373-2:2008
Rigid PVC pipes -- Differential scanning calorimetry (DSC) method -- Part 2: Measurement of the enthalpy of fusion of crystallites
90.93 23.040.20
ISO 18553:2002
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
90.93 23.040.20
23.040.45
ISO 18553:2002/Amd 1:2007
60.60 23.040.45
23.040.20
ISO 19892:2011
Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of joints to pressure cycling
60.60 23.040.60
83.080.20
ISO 19893:2011
Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of mounted assemblies to temperature cycling
60.60 23.040.45
23.040.20
ISO 19899:2010
Plastics piping systems -- Polyolefin pipes and mechanical fitting assemblies -- Test method for the resistance to end load (AREL test)
60.60 23.040.20
ISO/TS 19911:2010
Plastics pipes and fittings -- Format of a technical file for characterizing PE spigot end fittings
90.93 23.040.60
23.040.45
ISO 21751:2011
Plastics pipes and fittings -- Decohesion test of electrofusion assemblies -- Strip-bend test
60.60 23.040.45
23.040.20
ISO 23228:2011
Thermoplastics pipes for the conveyance of fluids -- Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens
60.60 23.040.20
ISO 24033:2009
Polyethylene of raised temperature resistance (PE-RT) pipes -- Effect of time and temperature on the expected strength
90.93 23.040.20
ISO/TS 26873:2010
Plastics pipes and fittings -- Definition and construction procedures for reference lines
90.93 23.040.45
23.040.20