Home

Standards catalogue

Subscribe to updates

ISO/TC 112  - Vacuum technology

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 112 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO 1608-1:1993
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
90.93 23.160ISO/TC 112
ISO 1608-2:1989
Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure
90.93 23.160ISO/TC 112
ISO 1609:1986
Vacuum technology -- Flange dimensions
90.93 23.160ISO/TC 112
ISO 2861:2013
Vacuum technology -- Dimensions of clamped-type quick-release couplings
60.60 23.160ISO/TC 112
ISO 3529-1:1981
Vacuum technology -- Vocabulary -- Part 1: General terms
90.93 01.040.23
23.160
ISO/TC 112
ISO 3529-2:1981
Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms
90.93 01.040.23
23.160
ISO/TC 112
ISO 3529-3:2014
Vacuum technology -- Vocabulary -- Part 3: Total and partial pressure vacuum gauges
60.60 23.160
01.040.23
ISO/TC 112
ISO 3567:2011
Vacuum gauges -- Calibration by direct comparison with a reference gauge
60.60 23.160ISO/TC 112
ISO/TS 3669-2:2007
Vacuum technology -- Bakable flanges -- Part 2: Dimensions of knife-edge flanges
90.92 23.160ISO/TC 112
ISO 5302:2003
Vacuum technology -- Turbomolecular pumps -- Measurement of performance characteristics
90.60 23.160ISO/TC 112
ISO 9803-1:2007
Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 1: Non knife-edge flange type
90.93 23.160ISO/TC 112
ISO 9803-2:2007
Vacuum technology -- Mounting dimensions of pipeline fittings -- Part 2: Knife-edge flange type
90.93 23.160ISO/TC 112
ISO 14291:2012
Vacuum gauges -- Definitions and specifications for quadrupole mass spectrometers
60.60 23.160ISO/TC 112
ISO 21358:2007
Vacuum technology -- Right-angle valve -- Dimensions and interfaces for pneumatic actuator
90.93 23.160ISO/TC 112
ISO 21360-1:2012
Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 1: General description
60.60 23.160ISO/TC 112
ISO 21360-2:2012
Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 2: Positive displacement vacuum pumps
60.60 23.160ISO/TC 112
ISO 27892:2010
Vacuum technology -- Turbomolecular pumps -- Measurement of rapid shutdown torque
60.60 23.160ISO/TC 112
ISO 27893:2011
Vacuum technology -- Vacuum gauges -- Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge
60.60 23.160ISO/TC 112
ISO 27894:2009
Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges
90.20 23.160ISO/TC 112
ISO 27895:2009
Vacuum technology -- Valves -- Leak test
90.20 23.160ISO/TC 112