Home

Standards catalogue

Subscribe to updates

ISO/TC 108/SC 2  - Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 108/SC 2 Secretariat

Standard and/or projectStageICS
ISO 1925:2001
Mechanical vibration -- Balancing -- Vocabulary
90.93 01.040.21
21.120.40
ISO 1940-1:2003
Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances
90.92 21.120.40
ISO 1940-1:2003/Cor 1:2005
60.60 21.120.40
ISO 4863:1984
Resilient shaft couplings -- Information to be supplied by users and manufacturers
90.93 21.120.20
ISO 4866:2010
Mechanical vibration and shock -- Vibration of fixed structures -- Guidelines for the measurement of vibrations and evaluation of their effects on structures
60.60 91.120.25
17.160
ISO 6954:2000
Mechanical vibration -- Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
90.93 17.160
47.020.80
ISO 7919-1:1996
Mechanical vibration of non-reciprocating machines -- Measurements on rotating shafts and evaluation criteria -- Part 1: General guidelines
90.93 17.160
ISO 7919-2:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
90.20 27.040
17.160
29.160.40
ISO 7919-3:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 3: Coupled industrial machines
90.93 17.160
ISO 7919-4:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 4: Gas turbine sets with fluid-film bearings
90.20 27.040
17.160
ISO 7919-5:2005
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 5: Machine sets in hydraulic power generating and pumping plants
90.92 17.160
29.160.40
ISO 8002:1986
Mechanical vibrations -- Land vehicles -- Method for reporting measured data
90.93 65.060.10
43.020
17.160
ISO 8608:1995
Mechanical vibration -- Road surface profiles -- Reporting of measured data
90.93 93.080.10
17.160
ISO 10055:1996
Mechanical vibration -- Vibration testing requirements for shipboard equipment and machinery components
90.93 17.160
47.020.01
ISO/TS 10811-1:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 1: Measurement and evaluation
90.93 17.160
91.120.25
ISO/TS 10811-2:2000
Mechanical vibration and shock -- Vibration and shock in buildings with sensitive equipment -- Part 2: Classification
90.93 17.160
91.120.25
ISO 10816-1:1995
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 1: General guidelines
90.93 17.160
ISO 10816-1:1995/Amd 1:2009
60.60 17.160
ISO 10816-2:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
90.20 17.160
27.040
29.160.40
ISO 10816-3:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
90.93 17.160
21.020
ISO 10816-4:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine sets with fluid-film bearings
90.20 27.040
17.160
ISO 10816-5:2000
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 5: Machine sets in hydraulic power generating and pumping plants
90.92 17.160
27.140
ISO 10816-6:1995
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 6: Reciprocating machines with power ratings above 100 kW
90.93 21.240
17.160
ISO 10816-6:1995/DAmd 1
40.20 17.160
21.240
ISO 10816-7:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
90.93 17.160
ISO 10816-8:2014
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 8: Reciprocating compressor systems
60.60 17.160
ISO/FDIS 10816-21
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 21: Horizontal axis wind turbines with gearbox
50.00 17.160
ISO 11342:1998
Mechanical vibration -- Methods and criteria for the mechanical balancing of flexible rotors
90.92 21.120.40
ISO 11342:1998/Cor 1:2000
60.60 21.120.40
ISO 13373-1:2002
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 1: General procedures
90.93 17.160
ISO 13373-2:2005
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 2: Processing, analysis and presentation of vibration data
90.93 17.160
ISO/DIS 13373-3
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 3: Guidelines for vibration diagnosis
40.20 17.160
ISO/CD 13373-9
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 9: Diagnostic techniques for electric motors
30.60 17.160
ISO 14837-1:2005
Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 1: General guidance
90.93 17.160
93.060
45.080
ISO/CD TS 14837-31
Mechanical vibration -- Groundborne noise and vibration arising from rail systems -- Part 31: Measurement for the evaluation of complaints at residential buildings
30.00 17.160
45.080
ISO/CD TS 14837-32
Mechanical vibration -- Ground-borne noise and vibration arising from rail systems -- Part 32: Measurement of dynamic properties of the ground
30.00 45.080
17.160
ISO 14839-1:2002
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 1: Vocabulary
90.93 17.160
01.040.17
ISO 14839-1:2002/Amd 1:2010
60.60 01.040.17
17.160
ISO 14839-2:2004
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 2: Evaluation of vibration
90.93 17.160
ISO 14839-3:2006
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 3: Evaluation of stability margin
90.93 17.160
ISO 14839-4:2012
Mechanical vibration -- Vibration of rotating machinery equipped with active magnetic bearings -- Part 4: Technical guidelines
60.60 17.160
ISO 14963:2003
Mechanical vibration and shock -- Guidelines for dynamic tests and investigations on bridges and viaducts
90.93 17.160
93.040
ISO 18649:2004
Mechanical vibration -- Evaluation of measurement results from dynamic tests and investigations on bridges
90.93 93.040
17.160
ISO/TR 19201:2013
Mechanical vibration -- Methodology for selecting appropriate machinery vibration standards
60.60 17.160
ISO 19499:2007
Mechanical vibration -- Balancing -- Guidance on the use and application of balancing standards
90.93 21.120.40
ISO 20283-2:2008
Mechanical vibration -- Measurement of vibration on ships -- Part 2: Measurement of structural vibration
90.93 47.020.01
17.140.30
ISO 20283-3:2006
Mechanical vibration -- Measurement of vibration on ships -- Part 3: Pre-installation vibration measurement of shipboard equipment
90.93 17.140.30
47.020.01
ISO 20283-4:2012
Mechanical vibration -- Measurement of vibration on ships -- Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
60.60 47.020.01
17.140.30
ISO 20283-4:2012/Amd 1:2014
60.60 17.140.30
47.020.01
ISO/NP 20816-1
Mechanical vibration - Measurement and evaluation of machine vibration -- Part 1: General Guidelines
10.99
ISO/CD 21940-11
Mechanical vibration -- Rotor balancing -- Part 11: Procedures and tolerances for rotors with rigid behaviour
30.20 21.120.40
ISO/CD 21940-12
Mechanical vibration -- Rotor balancing -- Part 12: Procedures and tolerances for rotors with flexible behaviour
30.00 21.120.40
ISO 21940-13:2012
Mechanical vibration -- Rotor balancing -- Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
60.60 21.120.40
ISO 21940-14:2012
Mechanical vibration -- Rotor balancing -- Part 14: Procedures for assessing balance errors
60.60 21.120.40
ISO 21940-21:2012
Mechanical vibration -- Rotor balancing -- Part 21: Description and evaluation of balancing machines
60.60 21.120.40
ISO 21940-23:2012
Mechanical vibration -- Rotor balancing -- Part 23: Enclosures and other protective measures for the measuring station of balancing machines
60.60 21.120.40
ISO 21940-31:2013
Mechanical vibration -- Rotor balancing -- Part 31: Susceptibility and sensitivity of machines to unbalance
60.60 21.120.40
ISO 21940-32:2012
Mechanical vibration -- Rotor balancing -- Part 32: Shaft and fitment key convention
60.60 21.120.40
ISO 22266-1:2009
Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
90.93 29.160.40
17.160