Items to be displayed:
| Subcommittee | Subcommittee Title |
|---|---|
| ISO/TC 107/SC 3 | Electrodeposited coatings and related finishes |
| ISO/TC 107/SC 4 | Hot dip coatings (galvanized, etc.) |
| ISO/TC 107/SC 7 | Corrosion tests |
| ISO/TC 107/SC 8 | Chemical conversion coatings |
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method | 90.20 | 25.220.40 25.220.20 |
| ISO 2063:2005 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys | 90.93 | 25.220.20 25.220.40 |
| ISO/WD 2063-1 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys -- Part 1: Planning of the corrosion protection system and component design considerations | 20.20 | 25.220.20 25.220.40 |
| ISO/WD 2063-2 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys -- Part 2: Conditions for execution of corrosion protection works by thermal spray processes | 20.20 | 25.220.20 25.220.40 |
| ISO 2064:1996 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness | 90.20 | 25.220.40 25.220.20 |
| ISO 2080:2008 Metallic and other inorganic coatings -- Surface treatment, metallic and other inorganic coatings -- Vocabulary | 90.93 | 25.220.40 01.040.25 |
| ISO 2177:2003 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution | 90.20 | 25.220.40 |
| ISO 2178:1982 Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method | 90.92 | 25.220.50 25.220.40 |
| ISO/AWI 2178 Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method | 20.00 | |
| ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials -- Measurement of coating thickness -- Amplitude-sensitive eddy-current method | 90.93 | 25.220.20 |
| ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method | 90.20 | 25.220.40 |
| ISO/NP 2746 Vitreous and porcelain enamels -- Enamelled articles for service under highly corrosive conditions -- High voltage test | 10.99 | 25.220.50 |
| ISO 2746:1998 Vitreous and porcelain enamels -- Enamelled articles for service under highly corrosive conditions -- High voltage test | 90.92 | 25.220.50 |
| ISO 2747:1998 Vitreous and porcelain enamels -- Enamelled cooking utensils -- Determination of resistance to thermal shock | 90.93 | 25.220.50 97.040.60 |
| ISO 2819:1980 Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion | 90.93 | 25.220.40 |
| ISO 3497:2000 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods | 90.93 | 25.220.40 |
| ISO 3543:2000 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method | 90.93 | 25.220.40 25.220.20 |
| ISO 3543:2000/Cor 1:2003 | 60.60 | 25.220.40 25.220.20 |
| ISO 3613:2010 Metallic and other inorganic coatings -- Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods | 90.93 | 25.220.20 |
| ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method | 90.20 | 25.220.20 25.220.40 |
| ISO 3882:2003 Metallic and other inorganic coatings -- Review of methods of measurement of thickness | 90.93 | 25.220.40 25.220.20 |
| ISO 3892:2000 Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods | 90.92 | 25.220.20 |
| ISO/NP 3892 Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods | 10.99 | 25.220.20 |
| ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests | 90.20 | 25.220.40 |
| ISO 4518:1980 Metallic coatings -- Measurement of coating thickness -- Profilometric method | 90.20 | 25.220.40 |
| ISO 4519:1980 Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes | 90.20 | 25.220.40 |
| ISO/CD 4528 Vitreous and porcelain enamel finishes -- Selection of test methods for vitreous and porcelain enamelled areas of articles | 30.99 | 25.220.50 |
| ISO 4528:2000 Vitreous and porcelain enamel finishes -- Selection of test methods for vitreous and porcelain enamelled areas of articles | 90.92 | 25.220.50 |
| ISO 4530:1983 Vitreous and porcelain enamelled manufactured articles -- Determination of resistance to heat | 90.93 | 25.220.50 |
| ISO 4531-1:1998 Vitreous and porcelain enamels -- Release of lead and cadmium from enamelled ware in contact with food -- Part 1: Method of test | 90.93 | 97.040.60 67.250 25.220.50 |
| ISO 4531-2:1998 Vitreous and porcelain enamels -- Release of lead and cadmium from enamelled ware in contact with food -- Part 2: Permissible limits | 90.93 | 97.040.60 67.250 25.220.50 |
| ISO 4532:1991 Vitreous and porcelain enamels -- Determination of the resistance of enamelled articles to impact -- Pistol test | 90.93 | 25.220.50 |
| ISO 4534:2010 Vitreous and porcelain enamels -- Determination of fluidity behaviour -- Fusion flow test | 60.60 | 25.220.50 |
| ISO 6370-1:1991 Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 1: Abrasion testing apparatus | 90.93 | 25.220.50 |
| ISO 6370-2:2011 Vitreous and porcelain enamels -- Determination of the resistance to abrasion -- Part 2: Loss in mass after sub-surface abrasion | 60.60 | 25.220.50 |
| ISO 8289:2000 Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects | 90.60 | 25.220.50 |
| ISO 8291:1986 Vitreous and porcelain enamels -- Method of test of self-cleaning properties | 90.93 | 25.220.50 |
| ISO 8401:1986 Metallic coatings -- Review of methods of measurement of ductility | 90.93 | 25.220.40 |
| ISO 9220:1988 Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method | 90.93 | 25.220.40 |
| ISO 10111:2000 Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods | 90.93 | 25.220.20 25.220.40 |
| ISO 10587:2000 Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method | 90.93 | 25.220.40 |
| ISO/AWI 11176-1 Vitreous and porcelain enamels -- Presentation and characterisation of defects -- Part 1: Enamels for chemical service and vessels | 20.00 | |
| ISO/CD 11177 Vitreous and porcelain enamels -- Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply -- Quality requirements and testing | 30.00 | 25.220.50 91.140.60 |
| ISO 12670:2011 Thermal spraying -- Components with thermally sprayed coatings -- Technical supply conditions | 60.60 | 25.220.20 |
| ISO 12671:2012 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings | 60.60 | 01.080.30 25.220.20 |
| ISO 12679:2011 Thermal spraying -- Recommendations for thermal spraying | 60.60 | 25.220.20 |
| ISO 12690:2010 Metallic and other inorganic coatings -- Thermal spray coordination -- Tasks and responsibilities | 60.60 | 25.220.20 |
| ISO/WD TR 12750 Thermal spraying -- Determination of residual stress of plasma spray ceramic coatings by X-ray diffraction method | 20.20 | 25.220.20 |
| ISO 13123:2011 Metallic and other inorganic coatings -- Test method of cyclic heating for thermal-barrier coatings under temperature gradient | 60.60 | 25.220.20 |
| ISO 13805:1999 Vitreous and porcelain enamels for aluminium -- Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) | 90.93 | 25.220.50 |
| ISO 13807:1999 Vitreous and porcelain enamels -- Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry | 90.93 | 25.220.50 |
| ISO 13807:1999/Cor 1:2000 | 60.60 | 25.220.50 |
| ISO 13826:2013 Metallic and other inorganic coatings -- Determination of thermal diffusivity of thermally sprayed ceramic coatings by laser flash method | 60.60 | 25.220.20 |
| ISO 14188:2012 Metallic and other inorganic coatings -- Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings | 60.60 | 25.220.20 |
| ISO 14231:2000 Thermal spraying -- Acceptance inspection of thermal spraying equipment | 90.93 | 25.220.20 |
| ISO 14232:2000 Thermal spraying -- Powders -- Composition and technical supply conditions | 90.92 | 25.220.20 |
| ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength | 90.92 | 25.220.20 |
| ISO/NP 14916 Thermal spraying -- Determination of tensile adhesive strength | 10.99 | 25.220.20 |
| ISO/NP 14917 Thermal spraying -- Terminology, classification | 10.99 | 01.040.25 25.220.20 |
| ISO 14917:1999 Thermal spraying -- Terminology, classification | 90.92 | 25.220.20 01.040.25 |
| ISO 14918:1998 Thermal spraying -- Approval testing of thermal sprayers | 90.92 | 25.220.20 |
| ISO 14919:2001 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions | 90.92 | 25.220.20 |
| ISO/DIS 14919 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions | 40.60 | 25.220.20 |
| ISO/DIS 14920 Thermal spraying -- Spraying and fusing of self-fluxing alloys | 40.60 | 25.220.20 |
| ISO 14920:1999 Thermal spraying -- Spraying and fusing of self-fluxing alloys | 90.92 | 25.220.20 |
| ISO 14921:2010 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components | 60.60 | 25.220.20 |
| ISO 14922-1:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use | 90.93 | 25.220.20 |
| ISO 14922-2:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements | 90.93 | 25.220.20 |
| ISO 14922-3:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements | 90.93 | 25.220.20 |
| ISO 14922-4:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements | 90.93 | 25.220.20 |
| ISO 14923:2003 Thermal spraying -- Characterization and testing of thermally sprayed coatings | 90.93 | 25.220.20 |
| ISO 14924:2005 Thermal spraying -- Post-treatment and finishing of thermally sprayed coatings | 90.93 | 25.220.20 |
| ISO 15695:2000 Vitreous and porcelain enamels -- Determination of scratch resistance of enamel finishes | 90.60 | 25.220.50 |
| ISO 15695:2000/Cor 1:2000 | 60.60 | 25.220.50 |
| ISO 15724:2001 Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method | 90.93 | 25.220.40 |
| ISO 16348:2003 Metallic and other inorganic coatings -- Definitions and conventions concerning appearance | 90.93 | 25.220.20 25.220.40 |
| ISO 17834:2003 Thermal spraying -- Coatings for protection against corrosion and oxidation at elevated temperatures | 90.93 | 25.220.20 |
| ISO 17836:2004 Thermal spraying -- Determination of the deposition efficiency for thermal spraying | 90.93 | 25.220.20 |
| ISO/AWI 18535 Diamond-like carbon films -- Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method | 20.00 | |
| ISO/CD 18555 Determination of thermal conductivity of thermal barrier coatings | 30.20 | |
| ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials -- Measurement of coating thickness -- Phase-sensitive eddy-current method | 90.93 | 25.220.40 |
| ISO 26945:2011 Metallic and other inorganic coatings -- Electrodeposited coatings of tin-cobalt alloy | 60.60 | 25.220.40 |
| ISO/TR 26946:2011 Standard method for porosity measurement of thermally sprayed coatings | 60.60 | 25.220.20 |
| ISO/CD 27307 Evaluation of adhesion/cohesion of plasma sprayed ceramic coatings by scratch testing | 30.99 | 25.220.20 |
| ISO 28706-1:2008 Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 1: Determination of resistance to chemical corrosion by acids at room temperature | 90.93 | 25.220.50 |
| ISO 28706-2:2008 Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours | 90.92 | 25.220.50 |
| ISO 28706-3:2008 Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel | 90.93 | 25.220.50 |
| ISO 28706-4:2008 Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel | 90.93 | 25.220.50 |
| ISO 28706-5:2010 Vitreous and porcelain enamels -- Determination of resistance to chemical corrosion -- Part 5: Determination of resistance to chemical corrosion in closed systems | 60.60 | 25.220.50 |
| ISO 28721-1:2008 Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 1: Quality requirements for apparatus, components, appliances and accessories | 90.93 | 25.220.50 |
| ISO 28721-2:2008 Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 2: Designation and specification of resistance to chemical attack and thermal shock | 90.93 | 25.220.50 |
| ISO 28721-3:2008 Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 3: Thermal shock resistance | 90.93 | 25.220.50 |
| ISO 28721-4:2010 Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings | 60.60 | 25.220.50 |
| ISO 28722:2008 Vitreous and porcelain enamels -- Characteristics of enamel coatings applied to steel panels intended for architecture | 90.93 | 25.220.50 |
| ISO 28723:2008 Vitreous and porcelain enamels -- Determination of the edge covering on enamelled steel plate to be used in heat exchangers | 90.93 | 25.220.50 |
| ISO 28762:2010 Vitreous and porcelain enamels -- Enamel coatings applied to steel for writing surfaces -- Specification | 60.60 | 25.220.50 |
| ISO 28763:2008 Vitreous and porcelain enamels -- Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers -- Specifications | 90.93 | 25.220.50 |
| ISO 28764:2008 Vitreous and porcelain enamels -- Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron | 90.93 | 25.220.50 |
| ISO 28765:2008 Vitreous and porcelain enamels -- Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges | 90.93 | 25.220.50 |
