Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO/DIS 834-10 Fire resistance tests -- Elements of building construction -- Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural elements | 40.60 | 13.220.50 | ISO/TC 92/SC 2 |
| ISO/DIS 834-11 Fire resistance tests -- Elements of building construction -- Part 11: Specific requirements for the assessment of fire protection to structural steel elements | 40.60 | 13.220.50 | ISO/TC 92/SC 2 |
| ISO/DIS 3008-2 Fire-resistance tests -- Part 2: Lift landing door assemblies | 40.60 | 13.220.50 91.060.50 | ISO/TC 92/SC 2 |
| ISO/DTS 3814 Tests for measuring "reaction-to-fire" of building materials -- Their development and application | 30.20 | 13.220.50 | ISO/TC 92/SC 1 |
| ISO/DIS 5660-1 Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) | 40.20 | 13.220.50 | ISO/TC 92/SC 1 |
| ISO/CD 5660-4 Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 4: Measurement of heat release for determination of low levels of combustibility | 30.60 | 13.220.50 | ISO/TC 92/SC 1 |
| ISO/CD 9705-1 Fire tests -- Full-scale room test for surface products | 30.60 | 13.220.50 | ISO/TC 92/SC 1 |
| ISO/WD TS 11925-1 Reaction to fire tests -- Ignitability of building products subjected to direct impingement of flame -- Part 1: Guidance on ignitability | 20.99 | 13.220.50 | ISO/TC 92/SC 1 |
| ISO/DIS 12468-1 External exposure of roofs to fire -- Part 1: Test method | 40.99 | 13.220.50 91.060.20 | ISO/TC 92/SC 2 |
| ISO/DIS 12468-2 External fire exposure to roofs -- Part 2: Classification of roofs | 40.99 | 13.220.50 91.060.20 | ISO/TC 92/SC 2 |
| ISO/DTR 12468-3 External exposure of roofs to fire -- Part 3: Commentary | 30.60 | 13.220.50 91.060.20 | ISO/TC 92/SC 2 |
| ISO/DIS 13784-1 Reaction to fire test for sandwich panel building systems -- Part 1: Small room test | 40.99 | 13.220.50 | ISO/TC 92/SC 1 |
| ISO/NP 13943 Fire safety -- Vocabulary | 10.99 | 01.040.13 13.220.01 | ISO/TC 92 |
| ISO/CD 14934-4 Fire tests -- Calibration and use of heat flux meters -- Part 4: Guidance on the use of heat flux meters in fire tests | 30.60 | 13.220.40 13.220.50 | ISO/TC 92/SC 1 |
| ISO/NP TR 15655 Fire resistance -- Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design | 10.99 | 13.220.40 | ISO/TC 92/SC 2 |
| ISO/PRF TR 15657 Fire resistance tests -- Guidelines for computational structural fire design | 50.20 | 13.220.01 | ISO/TC 92/SC 2 |
| ISO/DIS 16405 Measurement of toxic gas production using FTIR technique for room corner test and open calorimetry | 40.93 | 13.220.01 | ISO/TC 92/SC 1 |
| ISO/NP 16730-1 Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 1: General | 10.99 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/PRF TR 16730-2 Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 2: Example of a fire zone model | 50.20 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/DTR 16730-3 Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 3: Example of a CFD model | 30.60 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/DTR 16730-4 Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 4: Example of a structural model | 30.60 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/DTR 16730-5 Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 5: Example of an Egress model | 30.60 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/NP 16733-1 Fire safety engineering -- Selection of design fire scenarios and design fires -- Part 1: General | 10.99 | ISO/TC 92/SC 4 | |
| ISO/DIS 17554 Reaction to fire tests -- Mass loss measurement | 40.00 | 13.220.50 13.220.40 | ISO/TC 92/SC 1 |
| ISO/NP TR 17755 Fire Safety -- Statistical data | 10.99 | 13.220.20 | ISO/TC 92 |
| ISO/DIS 19700 Controlled equivalence ratio method for the determination of hazardous components of fire effluents -- The steady state tube furnace | 40.00 | 13.220.01 | ISO/TC 92/SC 3 |
| ISO/WD 19702 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared spectroscopy (FTIR) | 20.99 | ISO/TC 92/SC 3 | |
| ISO/PRF TR 22899-2 Determination of the resistance to jet fires of passive fire protection -- Part 2: Guidance on classification and implementation methods | 50.20 | 13.220.50 | ISO/TC 92/SC 2 |
| ISO/NP TR 24679-2 Fire safety Engineering -- Performance of structure in fire -- Part 2: Example of an airport terminal | 10.99 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/WD TR 24679-3 Fire safety Engineering -- Performance of structure in fire -- Part 3: Example of an open car park | 20.99 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/WD 26367-2 Guidelines for assessing the adverse environmental impact of fire effluents -- Part 2: Compilation of environmentally significant emissions from fires | 20.99 | ISO/TC 92/SC 3 | |
| ISO/NP 29761 Fire Safety Engineering -- Selection of design occupant behavioural scenarios | 10.99 | 13.220.01 | ISO/TC 92/SC 4 |
| ISO/FDIS 29904 Fire chemistry -- Generation and measurement of aerosols | 50.20 | 13.220.01 | ISO/TC 92/SC 3 |
