Filter :
Standard and/or project under the direct responsibility of ISO/TC 67/SC 2 Secretariat Stage ICS
ISO 3183:2007 [Withdrawn]
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
95.99
ISO 3183:2012 [Withdrawn]
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
95.99
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems — Amendment 1
95.99
Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
90.93
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Vocabulary
60.60
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Pipeline geohazard monitoring processes, systems and technologies
60.60
Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
90.92
ISO/FDIS 12490 [Under development]
Oil and gas industries including lower carbon energy — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
50.00
Oil and gas industries including lower carbon energy — Wet thermal insulation systems for pipelines and subsea equipment — Part 1: Validation of materials and insulation systems
60.60
Oil and gas industries including lower carbon energy — Wet thermal insulation systems for pipelines and subsea equipment — Part 2: Qualification processes for production and application procedures
60.60
Oil and gas industries including lower carbon energy — Wet thermal insulation systems for pipelines and subsea equipment — Part 3: Interfaces between systems, field joint systems, field repairs and pre-fabricated insulation
60.60
ISO 12736:2014 [Withdrawn]
Petroleum and natural gas industries — Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures
95.99
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Requirements and guidance for pipeline life extension assessment
60.60
ISO/TS 12747:2011 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems — Recommended practice for pipeline life extension
95.99
ISO 13623:2000 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems
95.99
ISO 13623:2009 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems
95.99
Petroleum and natural gas industries — Pipeline transportation systems
90.92
Petroleum and natural gas industries — Pipeline transportation systems — Amendment 1: Complementary requirements for the transportation of fluids containing carbon dioxide or hydrogen
60.60
ISO/AWI 13623 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems
20.00
ISO 13847:2000 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
95.99
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines — Technical Corrigendum 1
95.99
Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines
90.92
ISO/AWI 13847 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Welding of pipelines
20.00
ISO 14313:1999 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
95.99
ISO 14313:2007 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves
95.99
Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves — Technical Corrigendum 1
95.99
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Pipeline valves
60.60
ISO 14723:2001 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
95.99
ISO 14723:2009 [Withdrawn]
Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
95.99
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Subsea pipeline valves
60.60
ISO 15589-1:2003 [Withdrawn]
Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines
95.99
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
90.92
ISO 15589-1 [Under development]
Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 1: On-land pipelines
60.00
ISO 15589-2:2004 [Withdrawn]
Petroleum and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
95.99
ISO 15589-2:2012 [Withdrawn]
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
95.99
Oil and gas industries including lower carbon energy — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines
60.60
ISO 15590-1:2001 [Withdrawn]
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
95.99
ISO 15590-1:2009 [Withdrawn]
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
95.99
ISO 15590-1:2018 [Withdrawn]
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
95.99
Oil and gas industries including lower carbon energy — Factory bends, fittings and flanges for pipeline transportation systems — Part 1: Induction bends
60.60
ISO 15590-2:2003 [Withdrawn]
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings
95.99
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 2: Fittings
60.60
ISO 15590-3:2004 [Withdrawn]
Petroleum and natural gas industries — Induction bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges
95.99
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 3: Flanges
60.60
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 4: Factory cold bends
90.92
ISO/AWI 15590-4 [Under development]
Petroleum and natural gas industries — Factory bends, fittings and flanges for pipeline transportation systems — Part 4: Factory cold bends
20.00
Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines
90.92
ISO/DIS 16440 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines
40.60
Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods
90.92
ISO/DIS 16708 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Reliability-based limit state methods
40.00
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 1: Full-life cycle integrity management for onshore pipeline
90.93
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity management specification — Part 2: Full-life cycle integrity management for offshore pipeline
90.93
Petroleum and natural gas industry — Pipeline transportation systems — Geological hazard risk management for onshore pipeline
90.93
Petroleum and natural gas industries — Pipeline transportation systems — Test procedures for mechanical connectors
90.93
ISO 21809-1:2011 [Withdrawn]
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
95.99
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
90.92
ISO/AWI 21809-1 [Under development]
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
20.00
ISO 21809-2:2007 [Withdrawn]
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings
95.99
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings — Technical Corrigendum 1
95.99
ISO 21809-2:2014 [Withdrawn]
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
95.99
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single-layer fusion-bonded epoxy coatings
60.60
ISO 21809-3:2008 [Withdrawn]
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
95.99
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1
95.99
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
90.92
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings — Amendment 1: Introduction of mesh-backed coating systems
60.60
ISO/FDIS 21809-3 [Under development]
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
50.00
ISO 21809-4:2009 [Withdrawn]
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)
95.99
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene coatings (2-layer PE)
60.60
ISO 21809-5:2010 [Withdrawn]
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
95.99
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
90.92
ISO/DIS 21809-5 [Under development]
Oil and gas industries including lower carbon energy — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
40.99
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 11: Coatings for in-field application, coating repairs and rehabilitation
90.93
Petroleum, petrochemical and natural gas industries — Prevention of corrosion on pipeline systems influenced by stray currents
90.60
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Onshore and offshore pipelines pig traps design requirements
60.60
Petroleum and natural gas industry — Pipeline transportation systems — Pipeline integrity assessment specification
60.60
ISO/CD TR 23154 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Procedures of stress detecting for pipeline in service
30.60
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 1: Clad bends
60.60
Petroleum and natural gas industries — Corrosion resistant alloy clad bends and fittings for pipeline transportation system — Part 2: Clad fittings
60.60
ISO/DIS 24695 [Under development]
Oil and gas industries including lower carbon energy — The effects of High Voltage DC interference to buried pipelines — Measures to be implemented
40.60
ISO/CD 24947 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Pipeline Inspection Data Alignment Specification
30.60
ISO/CD 24948 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — On-land pipeline repair
30.60
ISO/CD TS 25170 [Under development]
Oil and gas industries including lower carbon energy – Pipeline transportation systems – Type B sleeves for pipeline defects repair
30.60
ISO/CD TR 25208 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Strength match of girth welds in high grade steel oil and gas transmission pipelines
30.60
ISO/CD TR 25209 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Assessment techniques for determining fitness for service of pipeline steel for transportation of natural gas-hydrogen mixture
30.60
ISO/AWI 25631 [Under development]
Oil and gas industries including lower carbon energy — Thermoplastic lined glass fiber reinforced plastic pipes for pipeline transportation systems
20.00
ISO/CD TR 25744 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — System imbalance evaluation of natural gas pipeline
30.60
ISO/AWI TR 25946 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Method of assessing brittle fracture in pipeline girth weld subjected to plastic strain
20.00
ISO/AWI TR 25948 [Under development]
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Negative effects of lightning strikes on pipelines damage mechanics, assessment, monitoring and mitigation
20.00

No matching records found. Please try changing the filter settings.