Items to be displayed:
| Standard and/or project | Stage | ICS | TC |
|---|---|---|---|
| ISO 60:1977 Plastics -- Determination of apparent density of material that can be poured from a specified funnel | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 61:1976 Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 62:2008 Plastics -- Determination of water absorption | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 75-1:2013 Plastics -- Determination of temperature of deflection under load -- Part 1: General test method | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 75-2:2013 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite | 60.60 | 83.080.10 | ISO/TC 61/SC 2 |
| ISO 75-3:2004 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics | 90.93 | 83.080.10 83.120 | ISO/TC 61/SC 2 |
| ISO 119:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 120:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 171:1980 Plastics -- Determination of bulk factor of moulding materials | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 172:1978 Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 175:2010 Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 176:2005 Plastics -- Determination of loss of plasticizers -- Activated carbon method | 90.20 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 177:1988 Plastics -- Determination of migration of plasticizers | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 178:2010 Plastics -- Determination of flexural properties | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 178:2010/Amd 1:2013 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 179-1:2010 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 179-2:1997 Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 179-2:1997/Cor 1:1998 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 179-2:1997/Amd 1:2011 Precision data | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 180:2000 Plastics -- Determination of Izod impact strength | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 180:2000/Amd 1:2006 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 180:2000/Amd 2:2013 Precision data | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 182-1:1990 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 182-2:1990 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 2: pH method | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 182-3:1993 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 3: Conductometric method | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 182-4:1993 Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 291:2008 Plastics -- Standard atmospheres for conditioning and testing | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 293:2004 Plastics -- Compression moulding of test specimens of thermoplastic materials | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-1:1996 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-1:1996/Amd 1:2001 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-1:1996/Amd 2:2005 Methods of determining the hold pressure and hold time | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-2:1996 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-2:1996/Amd 1:2004 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-3:2002 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-3:2002/Amd 1:2006 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-4:2001 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 294-5:2011 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 295:2004 Plastics -- Compression moulding of test specimens of thermosetting materials | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 305:1990 Plastics -- Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds -- Discoloration method | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 306:2004 Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST) | 90.92 | 83.080.20 | ISO/TC 61/SC 2 |
| ISO 307:2007 Plastics -- Polyamides -- Determination of viscosity number | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 307:2007/Amd 1:2013 Corrections, and update to reference to JIS K 6920-2 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 308:1994 Plastics -- Phenolic moulding materials -- Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 458-1:1985 Plastics -- Determination of stiffness in torsion of flexible materials -- Part 1: General method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 458-2:1985 Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride | 90.93 | 83.080.20 | ISO/TC 61/SC 2 |
| ISO 472:2013 Plastics -- Vocabulary | 60.60 | 83.080.01 01.040.83 | ISO/TC 61/SC 1 |
| ISO 483:2005 Plastics -- Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value | 90.20 | 83.200 | ISO/TC 61/SC 6 |
| ISO 489:1999 Plastics -- Determination of refractive index | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 527-1:2012 Plastics -- Determination of tensile properties -- Part 1: General principles | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 527-2:2012 Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 527-3:1995 Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 527-3:1995/Cor 1:1998 | 60.60 | 83.140.10 | ISO/TC 61/SC 2 |
| ISO 527-3:1995/Cor 2:2001 | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 527-4:1997 Plastics -- Determination of tensile properties -- Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 527-5:2009 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 584:1982 Plastics -- Unsaturated polyester resins -- Determination of reactivity at 80 degrees C (conventional method) | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 585:1990 Plastics -- Unplasticized cellulose acetate -- Determination of moisture content | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 604:2002 Plastics -- Determination of compressive properties | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 844:2007 Rigid cellular plastics -- Determination of compression properties | 90.92 | 83.100 | ISO/TC 61/SC 10 |
| ISO 845:2006 Cellular plastics and rubbers -- Determination of apparent density | 90.92 | 83.100 | ISO/TC 61/SC 10 |
| ISO 846:1997 Plastics -- Evaluation of the action of microorganisms | 90.92 | 83.080.01 07.100.99 | ISO/TC 61/SC 6 |
| ISO 868:2003 Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness) | 90.20 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 871:2006 Plastics -- Determination of ignition temperature using a hot-air furnace | 90.93 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 877-1:2009 Plastics -- Methods of exposure to solar radiation -- Part 1: General guidance | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 877-2:2009 Plastics -- Methods of exposure to solar radiation -- Part 2: Direct weathering and exposure behind window glass | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 877-3:2009 Plastics -- Methods of exposure to solar radiation -- Part 3: Intensified weathering using concentrated solar radiation | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 899-1:2003 Plastics -- Determination of creep behaviour -- Part 1: Tensile creep | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 899-2:2003 Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading | 90.20 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 974:2000 Plastics -- Determination of the brittleness temperature by impact | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 1043-1:2011 Plastics -- Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics | 60.60 | 83.080.01 | ISO/TC 61/SC 1 |
| ISO 1043-2:2011 Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials | 60.60 | 83.040.30 83.080.01 | ISO/TC 61/SC 1 |
| ISO 1043-3:1996 Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers | 90.92 | 83.040.30 83.080.01 | ISO/TC 61/SC 1 |
| ISO 1043-4:1998 Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants | 90.20 | 83.080.01 83.040.30 | ISO/TC 61/SC 1 |
| ISO 1060-1:1998 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1060-2:1998 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1061:1990 Plastics -- Unplasticized cellulose acetate -- Determination of free acidity | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1068:1975 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of compacted apparent bulk density | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1110:1995 Plastics -- Polyamides -- Accelerated conditioning of test specimens | 90.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1133-1:2011 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method | 60.60 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 1133-2:2011 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture | 60.60 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 1147:1995 Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test | 90.93 | 83.080.01 83.040.10 | ISO/TC 61/SC 9 |
| ISO 1158:1998 Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1163-1:1995 Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1163-2:1995 Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1172:1996 Textile-glass-reinforced plastics -- Prepregs, moulding compounds and laminates -- Determination of the textile-glass and mineral-filler content -- Calcination methods | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1183-1:2012 Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 1183-2:2004 Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 1183-3:1999 Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pyknometer method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 1209-1:2007 Rigid cellular plastics -- Determination of flexural properties -- Part 1: Basic bending test | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 1209-2:2007 Rigid cellular plastics -- Determination of flexural properties -- Part 2: Determination of flexural strength and apparent flexural modulus of elasticity | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 1264:1980 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1265:2007 Plastics -- Poly(vinyl chloride) resins -- Determination of number of impurities and foreign particles | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1268-1:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 1: General conditions | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-2:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 2: Contact and spray-up moulding | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-3:2000 Fibre-reinforced plastics -- Methods of producing test plates -- Part 3: Wet compression moulding | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-4:2005 Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-4:2005/Amd 1:2010 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-5:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 5: Filament winding | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-6:2002 Fibre-reinforced plastics -- Methods of producing test plates -- Part 6: Pultrusion moulding | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-7:2001 Fibre-reinforced plastics -- Methods of producing test plates -- Part 7: Resin transfer moulding | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-8:2004 Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-9:2003 Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-10:2005 Fibre-reinforced plastics -- Methods of producing test plates -- Part 10: Injection moulding of BMC and other long-fibre moulding compounds -- General principles and moulding of multipurpose test specimens | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1268-11:2005 Fibre-reinforced plastics -- Methods of producing test plates -- Part 11: Injection moulding of BMC and other long-fibre moulding compounds -- Small plates | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 1269:2006 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water) | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1598:1990 Plastics - Cellulose acetate -- Determination of insoluble particles | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1599:1990 Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1600:1990 Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1622-1:2012 Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1622-2:1995 Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1624:2001 Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water | 90.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1628-1:2009 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 1628-1:2009/Amd 1:2012 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 1628-2:1998 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1628-3:2010 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1628-4:1999 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1628-5:1998 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers | 90.20 | 83.080.10 | ISO/TC 61/SC 9 |
| ISO 1628-6:1990 Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers | 90.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1663:2007 Rigid cellular plastics -- Determination of water vapour transmission properties | 90.92 | 83.100 | ISO/TC 61/SC 10 |
| ISO 1675:1985 Plastics -- Liquid resins -- Determination of density by the pyknometer method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 1872-1:1993 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1872-2:2007 Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1873-1:1995 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1873-2:2007 Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1874-1:2010 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system and basis for specification | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1874-2:2012 Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1875:1982 Plastics -- Plasticized cellulose acetate -- Determination of matter extractable by diethyl ether | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 1887:1995 Textile glass -- Determination of combustible-matter content | 90.92 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 1888:2006 Textile glass -- Staple fibres or filaments -- Determination of average diameter | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 1889:2009 Reinforcement yarns -- Determination of linear density | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 1890:2009 Reinforcement yarns -- Determination of twist | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 1922:2012 Rigid cellular plastics -- Determination of shear strength | 60.60 | 83.100 | ISO/TC 61/SC 10 |
| ISO 1923:1981 Cellular plastics and rubbers -- Determination of linear dimensions | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 1926:2009 Rigid cellular plastics -- Determination of tensile properties | 60.60 | 83.100 | ISO/TC 61/SC 10 |
| ISO 2039-1:2001 Plastics -- Determination of hardness -- Part 1: Ball indentation method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 2039-2:1987 Plastics -- Determination of hardness -- Part 2: Rockwell hardness | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 2078:1993 Textile glass -- Yarns -- Designation | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 2113:1996 Reinforcement fibres -- Woven fabrics -- Basis for a specification | 90.93 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 2113:1996/Cor 1:2003 | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value | 90.93 | 83.080.10 87.060.20 | ISO/TC 61/SC 12 |
| ISO 2115:1996 Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature | 90.93 | 83.080.01 83.040.10 | ISO/TC 61/SC 9 |
| ISO 2535:2001 Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 2554:1997 Plastics -- Unsaturated polyester resins -- Determination of hydroxyl value | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 2555:1989 Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity by the Brookfield Test method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 2556:1974 Plastics -- Determination of the gas transmission rate of films and thin sheets under atmospheric pressure -- Manometric method | 90.93 | 83.140.10 | ISO/TC 61/SC 5 |
| ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics -- Determination of time of dissolution of the binder in styrene | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 2559:2011 Textile glass -- Mats (made from chopped or continuous strands) -- Designation and basis for specifications | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 2561:2012 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 2577:2007 Plastics -- Thermosetting moulding materials -- Determination of shrinkage | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 2578:1993 Plastics -- Determination of time-temperature limits after prolonged exposure to heat | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 2580-1:2002 Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 2580-2:2003 Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 2796:1986 Cellular plastics, rigid -- Test for dimensional stability | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 2797:1986 Textile glass -- Rovings -- Basis for a specification | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 2818:1994 Plastics -- Preparation of test specimens by machining | 90.93 | 83.080.01 | ISO/TC 61/SC 9 |
| ISO 2818:1994/Cor 1:2007 | 60.60 | 83.080.01 | ISO/TC 61/SC 9 |
| ISO 2896:2001 Rigid cellular plastics -- Determination of water absorption | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 2897-1:1997 Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 2897-2:2003 Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 2898-1:1996 Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 2898-2:2008 Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 3001:1999 Plastics -- Epoxy compounds -- Determination of epoxy equivalent | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3146:2000 Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 3146:2000/Cor 1:2002 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 3219:1993 Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 3341:2000 Textile glass -- Yarns -- Determination of breaking force and breaking elongation | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3342:2011 Textile glass -- Mats -- Determination of tensile breaking force | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3343:2010 Reinforcement yarns -- Determination of twist balance index | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3344:1997 Reinforcement products -- Determination of moisture content | 90.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 3374:2000 Reinforcement products -- Mats and fabrics -- Determination of mass per unit area | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3375:2009 Textile glass -- Determination of stiffness of rovings | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3451-1:2008 Plastics -- Determination of ash -- Part 1: General methods | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 3451-2:1998 Plastics -- Determination of ash -- Part 2: Poly(alkylene terephthalate) materials | 90.93 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 3451-3:1984 Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate | 90.93 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 3451-4:1998 Plastics -- Determination of ash -- Part 4: Polyamides | 90.93 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 3451-5:2002 Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride) | 90.93 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 3521:1997 Plastics -- Unsaturated polyester and epoxy resins -- Determination of overall volume shrinkage | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3521:1997/Cor 1:2003 | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3597-1:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 1: General considerations and preparation of rods | 90.20 | 59.100.10 83.120 | ISO/TC 61/SC 13 |
| ISO 3597-2:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 2: Determination of flexural strength | 90.20 | 83.120 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3597-3:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 3: Determination of compressive strength | 90.20 | 59.100.10 83.120 | ISO/TC 61/SC 13 |
| ISO 3597-4:2003 Textile-glass-reinforced plastics -- Determination of mechanical properties on rods made of roving-reinforced resin -- Part 4: Determination of apparent interlaminar shear strength | 90.20 | 59.100.10 83.120 | ISO/TC 61/SC 13 |
| ISO 3598:2011 Textile glass -- Yarns -- Basis for a specification | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3616:2001 Textile glass -- Chopped-strand and continuous-filament mats -- Determination of average thickness, thickness under load and recovery after compression | 90.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 3671:1976 Plastics -- Aminoplastic moulding materials -- Determination of volatile matter | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3672-1:2000 Plastics -- Unsaturated-polyester resins (UP-R) -- Part 1: Designation system | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3672-2:2000 Plastics -- Unsaturated-polyester resins (UP-R) -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3673-1:1996 Plastics -- Epoxy resins -- Part 1: Designation | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3673-2:2012 Plastics -- Epoxy resins -- Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 3915:1981 Plastics -- Measurement of resistivity of conductive plastics | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO/TR 4137:1978 Plastics -- Determination of modulus of elasticity by alternating flexure | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 4574:1978 Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4575:2007 Plastics -- Poly(vinyl chloride) pastes -- Determination of apparent viscosity using the Severs rheometer | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4576:1996 Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content) | 90.93 | 83.080.01 | ISO/TC 61/SC 9 |
| ISO 4577:1983 Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4578:1997 Adhesives -- Determination of peel resistance of high-strength adhesive bonds -- Floating-roller method | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 4581:1994 Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method | 90.93 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 4582:2007 Plastics -- Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 4586-1:2004 High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 1: Classification and specifications | 90.20 | 83.140.20 | ISO/TC 61/SC 11 |
| ISO 4586-2:2004 High-pressure decorative laminates -- Sheets made from thermosetting resins -- Part 2: Determination of properties | 90.20 | 83.140.20 | ISO/TC 61/SC 11 |
| ISO 4587:2003 Adhesives -- Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 4589-1:1996 Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance | 90.92 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 4589-2:1996 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test | 90.92 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 4589-2:1996/Amd 1:2005 | 60.60 | 13.220.40 83.080.01 | ISO/TC 61/SC 4 |
| ISO 4589-3:1996 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test | 90.92 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 4590:2002 Rigid cellular plastics -- Determination of the volume percentage of open cells and of closed cells | 90.92 | 83.100 | ISO/TC 61/SC 10 |
| ISO 4591:1992 Plastics -- Film and sheeting -- Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 4592:1992 Plastics -- Film and sheeting -- Determination of length and width | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 4593:1993 Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 4597-1:2005 Plastics -- Hardeners and accelerators for epoxy resins -- Part 1: Designation | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 4602:2010 Reinforcements -- Woven fabrics -- Determination of number of yarns per unit length of warp and weft | 60.60 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 4603:1993 Textile glass -- Woven fabrics -- Determination of thickness | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4603:1993/Amd 1:2010 | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4604:2011 Reinforcement fabrics -- Determination of conventional flexural stiffness -- Fixed-angle flexometer method | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4606:1995 Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method | 90.93 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4608:1998 Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4610:2001 Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4611:2010 Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 4612:1999 Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4613-1:1993 Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 1: Designation and specification | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4613-2:1995 Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4613-2:1995/Amd 1:2004 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4614:1977 Plastics -- Melamine-formaldehyde mouldings -- Determination of extractable formaldehyde | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 4615:1979 Plastics -- Unsaturated polyesters and epoxide resins -- Determination of total chlorine content | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 4892-1:1999 Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance | 90.92 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 4892-2:2013 Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 4892-3:2006 Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps | 90.92 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 4892-4:2004 Plastics -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps | 90.92 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 4892-4:2004/Cor 1:2005 | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 4894-1:1997 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4894-2:1995 Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 4895:1997 Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize | 90.92 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 4897:1985 Cellular plastics -- Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 4898:2010 Rigid cellular plastics -- Thermal insulation products for buildings -- Specifications | 60.60 | 91.100.60 83.100 | ISO/TC 61/SC 10 |
| ISO 4899:1993 Textile-glass-reinforced thermosetting plastics -- Properties and test methods | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 4900:2011 Textile glass -- Mats and fabrics -- Determination of contact mouldability | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 4901:2011 Reinforced plastics based on unsaturated-polyester resins -- Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography | 60.60 | 83.120 | ISO/TC 61/SC 12 |
| ISO 5025:1997 Reinforcement products -- Woven fabrics -- Determination of width and length | 90.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 5659-2:2012 Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test | 60.60 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO/TR 5659-3:1999 Plastics -- Smoke generation -- Part 3: Determination of optical density by a dynamic-flow method | 90.93 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 6186:1998 Plastics -- Determination of pourability | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 6187:2001 Rigid cellular plastics -- Determination of friability | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 6237:2003 Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by tensile loading | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 6238:2001 Adhesives -- Wood-to-wood adhesive bonds -- Determination of shear strength by compressive loading | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 6383-1:1983 Plastics -- Film and sheeting -- Determination of tear resistance -- Part 1: Trouser tear method | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 6383-2:1983 Plastics -- Film and sheeting -- Determination of tear resistance -- Part 2: Elmendorf method | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 6401:2008 Plastics -- Poly(vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method | 90.93 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 6402-1:2002 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 6402-2:2003 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 6427:2013 Plastics -- Determination of matter extractable by organic solvents (conventional methods) | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 6601:2002 Plastics -- Friction and wear by sliding -- Identification of test parameters | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6603-1:2000 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6603-2:2000 Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-1:2011 Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-2:2008 Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-3:1994 Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-3:1994/Cor 1:1995 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-4:2008 Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-5:1996 Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-5:1996/Amd 1:2007 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-6:1996 Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-6:1996/Amd 1:2007 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-7:1996 Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-7:1996/Amd 1:2007 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-8:1997 Plastics -- Determination of dynamic mechanical properties -- Part 8: Longitudinal and shear vibration -- Wave-propagation method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-9:1997 Plastics -- Determination of dynamic mechanical properties -- Part 9: Tensile vibration -- Sonic-pulse propagation method | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-9:1997/Amd 1:2007 Precision | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-10:1999 Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer | 90.92 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-11:2012 Plastics -- Determination of dynamic mechanical properties -- Part 11: Glass transition temperature | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 6721-12:2009 Plastics -- Determination of dynamic mechanical properties -- Part 12: Compressive vibration -- Non-resonance method | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 7059:1982 Caprolactam for industrial use -- Determination of absorbance at a wavelength of 290 nm | 90.93 | 71.080.30 | ISO/TC 61/SC 5 |
| ISO 7214:2012 Cellular plastics -- Polyethylene -- Methods of test | 60.60 | 83.100 | ISO/TC 61/SC 10 |
| ISO 7327:1994 Plastics -- Hardeners and accelerators for epoxide resins -- Determination of free acid in acid anhydride | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 7391-1:2006 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 7391-2:2006 Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 7616:1986 Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 7765-1:1988 Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 1: Staircase methods | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 7765-2:1994 Plastics film and sheeting -- Determination of impact resistance by the free-falling dart method -- Part 2: Instrumented puncture test | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 7792-1:2012 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 7792-2:2012 Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 7808:1992 Plastics -- Thermosetting moulding materials -- Determination of transfer flow | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 7822:1990 Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 7823-1:2003 Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 1: Cast sheets | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 7823-2:2003 Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 2: Extruded sheets | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 7823-3:2007 Plastics -- Poly(methyl methacrylate) sheets -- Types, dimensions and characteristics -- Part 3: Continuous cast sheets | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 7850:1986 Cellular plastics, rigid -- Determination of compressive creep | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 8112:1984 Caprolactam for industrial use -- Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) -- Spectrometric method | 90.93 | 71.080.30 | ISO/TC 61/SC 5 |
| ISO 8256:2004 Plastics -- Determination of tensile-impact strength | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 8257-1:1998 Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 8257-2:2001 Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 8295:1995 Plastics -- Film and sheeting -- Determination of the coefficients of friction | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 8296:2003 Plastics -- Film and sheeting -- Determination of wetting tension | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 8510-2:2006 Adhesives -- Peel test for a flexible-bonded-to-rigid test specimen assembly -- Part 2: 180 degree peel | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 8516:2011 Textile glass -- Textured yarns -- Basis for a specification | 60.60 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 8570:1991 Plastics -- Film and sheeting - Determination of cold-crack temperature | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 8604:1988 Plastics -- Prepregs -- Definitions of terms and symbols for designations | 90.20 | 83.120 01.040.83 | ISO/TC 61/SC 1 |
| ISO 8605:2001 Textile-glass-reinforced plastics -- Sheet moulding compound (SMC) -- Basis for a specification | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 8606:1990 Plastics -- Prepregs -- Bulk moulding compound (BMC) and dough moulding compound (DMC) -- Basis for a specification | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 8619:2003 Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 8660:2002 Plastics -- Determination of permanganate absorption number of caprolactam -- Spectrometric method | 90.93 | 71.080.30 83.080.01 | ISO/TC 61/SC 5 |
| ISO 8661:1988 Caprolactam for industrial use -- Determination of volatile bases content -- Titrimetric method after distillation | 90.93 | 71.080.30 | ISO/TC 61/SC 5 |
| ISO 8873-1:2006 Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 1: Material specifications | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 8873-2:2007 Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 2: Application | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 8873-3:2007 Rigid cellular plastics -- Spray-applied polyurethane foam for thermal insulation -- Part 3: Test methods | 90.60 | 83.100 | ISO/TC 61/SC 10 |
| ISO 8974:2002 Plastics -- Phenolic resins -- Determination of residual phenol content by gas chromatography | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 8975:1989 Plastics -- Phenolic resins -- Determination of pH | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 8985:1998 Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 8986-1:2009 Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 8986-2:2009 Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 8987:2005 Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 8988:2006 Plastics -- Phenolic resins -- Determination of hexamethylenetetramine content -- Kjeldahl method, perchloric acid method and hydrochloric acid method | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 8989:1995 Plastics -- Liquid phenolic resins -- Determination of water miscibility | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 9054:1990 Cellular plastics, rigid -- Test methods for self-skinned, high-density materials | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 9113:1986 Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 9142:2003 Adhesives -- Guide to the selection of standard laboratory ageing conditions for testing bonded joints | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 9163:2005 Textile glass -- Rovings -- Manufacture of test specimens and determination of tensile strength of impregnated rovings | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 9352:2012 Plastics -- Determination of resistance to wear by abrasive wheels | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 9370:2009 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 9396:1997 Plastics -- Phenolic resins -- Determination of the gel time of resols under specific conditions using automatic apparatus | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 9653:1998 Adhesives -- Test method for shear impact strength of adhesive bonds | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 9664:1993 Adhesives -- Test methods for fatigue properties of structural adhesives in tensile shear | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 9665:1998 Adhesives -- Animal glues -- Methods of sampling and testing | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 9702:1996 Plastics -- Amine epoxide hardeners -- Determination of primary, secondary and tertiary amine group nitrogen content | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 9771:1995 Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 9772:2012 Cellular plastics -- Determination of horizontal burning characteristics of small specimens subjected to a small flame | 60.60 | 83.100 13.220.40 | ISO/TC 61/SC 4 |
| ISO 9773:1998 Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source | 90.92 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 9773:1998/Amd 1:2003 Specimens | 60.60 | 13.220.40 83.080.01 | ISO/TC 61/SC 4 |
| ISO 9774:2004 Thermal insulation for building applications -- Guidelines for selecting properties | 90.60 | 83.100 91.100.60 | ISO/TC 61/SC 10 |
| ISO 9782:1993 Plastics -- Reinforced moulding compounds and prepregs -- Determination of apparent volatile-matter content | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 9944:1990 Plastics -- Phenolic resins -- Determination of electrical conductivity of resin extracts | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 9944:1990/Cor 1:1997 | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 9988-1:2004 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 9988-2:2006 Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 9994:2005 Lighters -- Safety specification | 90.20 | 97.180 | ISO/TC 61/SC 4 |
| ISO 9994:2005/Amd 1:2008 Clarification of structural requirements | 60.60 | 97.180 | ISO/TC 61 |
| ISO 10082:1999 Plastics -- Phenolic resins -- Classification and test methods | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 10093:1998 Plastics -- Fire tests -- Standard ignition sources | 90.92 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 10119:2002 Carbon fibre -- Determination of density | 90.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 10122:1995 Reinforcement materials -- Tubular braided sleeves -- Basis for a specification | 90.92 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 10123:1990 Adhesives -- Determination of shear strength of anaerobic adhesives using pin-and-collar specimens | 90.92 | 83.180 | ISO/TC 61/SC 11 |
| ISO 10210:2012 Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 10350-1:2007 Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials | 90.93 | 83.080.20 | ISO/TC 61/SC 2 |
| ISO 10350-2:2011 Plastics -- Acquisition and presentation of comparable single-point data -- Part 2: Long-fibre-reinforced plastics | 60.60 | 83.120 | ISO/TC 61/SC 2 |
| ISO 10352:2010 Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of mass per unit area | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 10354:1992 Adhesives -- Characterization of durability of structural-adhesive-bonded assemblies -- Wedge rupture test | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 10363:1992 Hot-melt adhesives -- Determination of thermal stability | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 10364:2007 Structural adhesives -- Determination of the pot life (working life) of multi-component adhesives | 90.92 | 83.180 | ISO/TC 61/SC 11 |
| ISO 10365:1992 Adhesives -- Designation of main failure patterns | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 10366-1:2002 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 10366-2:2003 Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 10371:1993 Reinforcement materials -- Braided tapes -- Basis for a specification | 90.20 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 10548:2002 Carbon fibre -- Determination of size content | 90.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 10548:2002/Cor 1:2008 | 60.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 10618:2004 Carbon fibre -- Determination of tensile properties of resin-impregnated yarn | 90.60 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 10640:2011 Plastics -- Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 10724-1:1998 Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 1: General principles and moulding of multipurpose test specimens | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 10724-2:1998 Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 10840:2008 Plastics -- Guidance for the use of standard fire tests | 90.93 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 10927:2011 Plastics -- Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 10964:1993 Adhesives -- Determination of torque strength of anaerobic adhesives on threaded fasteners | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 11003-1:2001 Adhesives -- Determination of shear behaviour of structural adhesives -- Part 1: Torsion test method using butt-bonded hollow cylinders | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 11003-2:2001 Adhesives -- Determination of shear behaviour of structural adhesives -- Part 2: Tensile test method using thick adherends | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 11248:1993 Plastics -- Thermosetting moulding materials -- Evaluation of short-term performance at elevated temperatures | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 11337:2010 Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography | 60.60 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 11339:2010 Adhesives -- T-peel test for flexible-to-flexible bonded assemblies | 60.60 | 83.180 | ISO/TC 61/SC 11 |
| ISO 11343:2003 Adhesives -- Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions -- Wedge impact method | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 11357-1:2009 Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11357-2:2013 Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11357-3:2011 Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11357-4:2005 Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity | 90.20 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11357-5:2013 Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11357-6:2008 Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11357-7:2002 Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics | 90.92 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11358:1997 Plastics -- Thermogravimetry (TG) of polymers -- General principles | 90.92 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11358-2:2005 Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy | 90.20 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11359-1:1999 Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles | 90.92 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11359-2:1999 Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11359-3:2002 Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11401:1993 Plastics -- Phenolic resins -- Separation by liquid chromatography | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 11402:2004 Phenolic, amino and condensation resins -- Determination of free-formaldehyde content | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 11403-1:2001 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties | 90.92 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 11403-2:2012 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 11403-3:1999 Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties | 90.92 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 11409:1993 Plastics -- Phenolic resins -- Determination of heats and temperatures of reaction by differential scanning calorimetry | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 11443:2005 Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers | 90.20 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 11468:1997 Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method | 90.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 11469:2000 Plastics -- Generic identification and marking of plastics products | 90.92 | 83.080.01 | ISO/TC 61/SC 1 |
| ISO 11501:1995 Plastics -- Film and sheeting -- Determination of dimensional change on heating | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 11502:1995 Plastics -- Film and sheeting -- Determination of blocking resistance | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 11542-1:2001 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 11542-2:1998 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 11542-2:1998/Cor 1:2007 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 11566:1996 Carbon fibre -- Determination of the tensile properties of single-filament specimens | 90.93 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 11567:1995 Carbon fibre -- Determination of filament diameter and cross-sectional area | 90.93 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 11667:1997 Fibre-reinforced plastics -- Moulding compounds and prepregs -- Determination of resin, reinforced-fibre and mineral-filler content -- Dissolution methods | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 11833-1:2012 Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 1: Sheets of thickness not less than 1 mm | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 11833-2:1998 Plastics -- Unplasticized poly(vinyl chloride) sheets -- Types, dimensions and characteristics -- Part 2: Sheets of thickness less than 1 mm | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 11907-1:1998 Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: Guidance | 90.20 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 11907-2:1995 Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 2: Static method | 90.93 | 13.220.40 83.080.01 | ISO/TC 61/SC 4 |
| ISO 11907-3:1998 Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 3: Dynamic decomposition method using a travelling furnace | 90.20 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 11907-4:1998 Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 4: Dynamic decomposition method using a conical radiant heater | 90.20 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 11963:2012 Plastics -- Polycarbonate sheets -- Types, dimensions and characteristics | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 12000:2000 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods | 90.92 | 83.080.20 83.040.10 | ISO/TC 61/SC 9 |
| ISO 12017:1995 Plastics -- Poly(methyl methacrylate) double- and triple-skin sheets -- Test methods | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 12058-1:1997 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 12086-1:2006 Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 12086-1:2006/Cor 1:2006 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 12086-2:2006 Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 12086-2:2006/Cor 1:2006 | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 12114:1997 Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of cure characteristics | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12115:1997 Fibre-reinforced plastics -- Thermosetting moulding compounds and prepregs -- Determination of flowability, maturation and shelf life | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12115:1997/Cor 1:1998 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12418-1:2012 Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 12418-2:2012 Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 2: Preparation of test specimens and determination of properties | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 12815:2013 Fibre-reinforced plastic composites -- Determination of plain-pin bearing strength | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12817:2013 Fibre-reinforced plastic composites -- Determination of open-hole compression strength | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 12992:1995 Plastics -- Vertical flame spread determination for film and sheet | 90.60 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 13000-1:2005 Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 1: Requirements and designation | 90.20 | 83.140.01 | ISO/TC 61/SC 9 |
| ISO 13000-2:2005 Plastics -- Polytetrafluoroethylene (PTFE) semi-finished products -- Part 2: Preparation of test specimens and determination of properties | 90.20 | 83.140.01 | ISO/TC 61/SC 9 |
| ISO 13002:1998 Carbon fibre -- Designation system for filament yarns | 90.93 | 59.100.20 | ISO/TC 61/SC 13 |
| ISO 13003:2003 Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 13445:2003 Adhesives -- Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 13468-1:1996 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single-beam instrument | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 13468-2:1999 Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 13586:2000 Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 13586:2000/Amd 1:2003 Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 13636:2012 Plastics -- Film and sheeting -- Non-oriented poly(ethylene terephthalate) (PET) sheets | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 13741-1:1998 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 1: Direct liquid injection method | 90.20 | 83.040.10 83.080.01 | ISO/TC 61/SC 9 |
| ISO 13741-2:1998 Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 2: Headspace method | 90.20 | 83.040.10 83.080.01 | ISO/TC 61/SC 9 |
| ISO 13802:1999 Plastics -- Verification of pendulum impact-testing machines -- Charpy, Izod and tensile impact-testing | 90.92 | 83.200 | ISO/TC 61/SC 2 |
| ISO 13802:1999/Cor 1:2000 | 60.60 | 83.200 | ISO/TC 61/SC 2 |
| ISO/TR 13883:1995 Plastics -- Guide to the writing of test methods | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 13894-1:2000 High-pressure decorative laminates -- Composite elements -- Part 1: Test methods | 90.93 | 83.140.20 | ISO/TC 61/SC 11 |
| ISO 13894-2:2005 High-pressure decorative laminates -- Composite elements -- Part 2: Specifications for composite elements with wood-based substrates for interior use | 90.20 | 83.140.20 | ISO/TC 61/SC 11 |
| ISO 13927:2001 Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector | 90.92 | 83.080.01 | ISO/TC 61/SC 4 |
| ISO 13975:2012 Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems -- Method by measurement of biogas production | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14125:1998 Fibre-reinforced plastic composites -- Determination of flexural properties | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14125:1998/Amd 1:2011 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14125:1998/Cor 1:2001 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14126:1999 Fibre-reinforced plastic composites -- Determination of compressive properties in the in-plane direction | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14126:1999/Cor 1:2001 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14127:2008 Carbon-fibre-reinforced composites -- Determination of the resin, fibre and void contents | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14129:1997 Fibre-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14130:1997 Fibre-reinforced plastic composites -- Determination of apparent interlaminar shear strength by short-beam method | 90.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14130:1997/Cor 1:2003 | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 14322:2012 Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14526-1:1999 Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14526-2:1999 Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14526-3:1999 Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 3: Requirements for selected moulding compounds | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14527-1:1999 Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14527-2:1999 Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14527-3:1999 Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14528-1:1999 Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14528-2:1999 Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14528-3:1999 Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14529-1:1999 Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14529-2:1999 Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14529-3:1999 Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 3: Requirements for selected moulding compounds | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14530-1:1999 Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14530-2:1999 Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14530-3:1999 Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 3: Requirements for selected moulding compounds | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14615:1997 Adhesives -- Durability of structural adhesive joints -- Exposure to humidity and temperature under load | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 14616:1997 Plastics -- Heatshrinkable films of polyethylene, ethylene copolymers and their mixtures -- Determination of shrinkage stress and contraction stress | 90.92 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I) -- Requirements and test methods | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 14632:1998 Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 14663-1:1999 Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 14663-2:1999 Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 14676:1997 Adhesives -- Evaluation of the effectiveness of surface treatment techniques for aluminium -- Wet-peel test by floating-roller method | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 14678:2005 Adhesives -- Determination of resistance to flow (sagging) | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 14679:1997 Adhesives -- Measurement of adhesion characteristics by a three-point bending method | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 14782:1999 Plastics -- Determination of haze for transparent materials | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14782:1999/Cor 1:2005 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14848:1998 Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C | 90.20 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14849:1999 Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Indophenol method | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14851:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14851:1999/Cor 1:2005 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14852:1999/Cor 1:2005 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14853:2005 Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production | 90.20 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14853:2005/Cor 1:2009 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14855-1:2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14855-2:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14855-2:2007/Cor 1:2009 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 14896:2009 Plastics -- Polyurethane raw materials -- Determination of isocyanate content | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14896:2006/Amd 1:2007 Acceptable variations in the procedure for method B | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14897:2002 Plastics -- Polyols for use in the production of polyurethane -- Determination of water content | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14898:1999 Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Determination of acidity | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14898:1999/Amd 1:2011 | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14899:2001 Plastics -- Polyols for use in the production of polyurethane -- Determination of basicity | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14900:2001 Plastics -- Polyols for use in the production of polyurethane -- Determination of hydroxyl number | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14900:2001/Cor 1:2005 | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 14910-1:2013 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specification | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 14910-2:2013 Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 15013:2007 Plastics -- Extruded sheets of polypropylene (PP) -- Requirements and test methods | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15014:2007 Plastics -- Extruded sheets of poly(vinylidene fluoride) (PVDF) -- Requirements and test methods | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15015:2011 Plastics -- Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) -- Requirements and test methods | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15023-1:2001 Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 15023-2:2003 Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 15024:2001 Fibre-reinforced plastic composites -- Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15028:2004 Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine | 90.92 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 15033:2007 Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 15034:1999 Composites -- Prepregs -- Determination of resin flow | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15038:1999 Plastics -- Organic-perester crosslinking agents for unsaturated-polyester thermosetting materials -- Determination of active-oxygen content | 90.93 | 83.040.30 | ISO/TC 61/SC 12 |
| ISO 15039:2003 Textile-glass rovings -- Determination of solubility of size | 90.20 | 59.100.10 | ISO/TC 61/SC 13 |
| ISO 15040:1999 Composites -- Prepregs -- Determination of gel time | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15063:2011 Plastics -- Polyols for use in the production of polyurethanes -- Determination of hydroxyl number by NIR spectroscopy | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 15064:2010 Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of the isomer ratio in toluenediisocyanate | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 15100:2000 Plastics -- Reinforcement fibres -- Chopped strands -- Determination of bulk density | 90.93 | 59.100.01 | ISO/TC 61/SC 13 |
| ISO 15103-2:2007 Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 15105-1:2007 Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 1: Differential-pressure methods | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15105-2:2003 Plastics -- Film and sheeting -- Determination of gas-transmission rate -- Part 2: Equal-pressure method | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15106-1:2003 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 1: Humidity detection sensor method | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15106-2:2003 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 2: Infrared detection sensor method | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15106-3:2003 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 3: Electrolytic detection sensor method | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15106-4:2008 Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 4: Gas-chromatographic detection sensor method | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15107:1998 Adhesives -- Determination of cleavage strength of bonded joints | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 15108:1998 Adhesives -- Determination of strength of bonded joints using a bending-shear method | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 15109:1998 Adhesives -- Determination of the time to rupture of bonded joints under static load | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 15166-1:1998 Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 15166-2:2000 Adhesives -- Methods of preparing bulk specimens -- Part 2: Elevated-temperature-curing one-part systems | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 15252-1:1999 Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 15252-2:1999 Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 2: Preparation of test specimens and determination of properties | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 15252-3:1999 Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 3: Requirements for selected moulding compounds | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 15270:2008 Plastics -- Guidelines for the recovery and recycling of plastics waste | 90.93 | 13.030.50 83.080.01 | ISO/TC 61/SC 5 |
| ISO 15310:1999 Fibre-reinforced plastic composites -- Determination of the in-plane shear modulus by the plate twist method | 90.93 | 83.120 | ISO/TC 61/SC 13 |
| ISO 15314:2004 Plastics -- Methods for marine exposure | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 15373:2001 Plastics -- Polymer dispersions -- Determination of free formaldehyde | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 15509:2001 Adhesives -- Determination of the bond strength of engineering-plastic joints | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 15512:2008 Plastics -- Determination of water content | 90.92 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 15527:2010 Plastics -- Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) -- Requirements and test methods | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15605:2000 Adhesives -- Sampling | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 15791-1:2002 Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance | 90.92 | 13.220.40 83.080.01 | ISO/TC 61/SC 4 |
| ISO 15850:2002 Plastics -- Determination of tension-tension fatigue crack propagation -- Linear elastic fracture mechanics (LEFM) approach | 90.92 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 15985:2004 Plastics -- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas | 90.92 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 15985:2004/Cor 1:2007 | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 15987:2003 Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15988:2003 Plastics -- Film and sheeting -- Biaxially oriented poly(ethylene terephthalate) (PET) films | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15989:2004 Plastics -- Film and sheeting -- Measurement of water-contact angle of corona-treated films | 90.93 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 15989:2004/Cor 1:2007 | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 16012:2004 Plastics -- Determination of linear dimensions of test specimens | 90.92 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 16012:2004/Cor 1:2005 | 60.60 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 16014-1:2012 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 16014-2:2012 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 16014-3:2012 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 16014-4:2012 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 16014-5:2012 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 16152:2005 Plastics -- Determination of xylene-soluble matter in polypropylene | 90.20 | 83.080.01 | ISO/TC 61/SC 9 |
| ISO 16770:2004 Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT) | 90.92 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 16790:2005 Plastics -- Determination of drawing characteristics of thermoplastics in the molten state | 90.20 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 16869:2008 Plastics -- Assessment of the effectiveness of fungistatic compounds in plastics formulations | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 16929:2013 Plastics -- Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 17087:2006 Specifications for adhesives used for finger joints in non-structural lumber products | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 17088:2012 Specifications for compostable plastics | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 17178:2013 Adhesives -- Adhesives for bonding parquet to subfloor -- Test methods and minimum requirements | 60.60 | 83.180 | ISO/TC 61/SC 11 |
| ISO 17194:2007 Structural adhesives -- A standard database of properties | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 17212:2012 Structural adhesives -- Guidelines for the surface preparation of metals and plastics prior to adhesive bonding | 60.60 | 83.180 | ISO/TC 61/SC 11 |
| ISO 17281:2002 Plastics -- Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s) | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 17282:2004 Plastics -- Guide to the acquisition and presentation of design data | 90.92 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 17422:2002 Plastics -- Environmental aspects -- General guidelines for their inclusion in standards | 90.20 | 13.020.01 83.080.01 | ISO/TC 61/SC 5 |
| ISO 17555:2003 Plastics -- Film and sheeting -- Biaxially oriented polypropylene (PP) films | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 17556:2012 Plastics -- Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 17557:2003 Plastics -- Film and sheeting -- Cast polypropylene (PP) films | 90.20 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 17710:2002 Plastics -- Polyols for use in the production of polyurethane -- Determination of degree of unsaturation by microtitration | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 17744:2004 Plastics -- Determination of specific volume as a function of temperature and pressure (pvT diagram) -- Piston apparatus method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 17771:2003 Plastics -- Thermoset moulding compounds -- Determination of the degree of fibre wetting in SMC | 90.20 | 83.120 | ISO/TC 61/SC 13 |
| ISO 18280:2010 Plastics -- Epoxy resins -- Test methods | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 18352:2009 Carbon-fibre-reinforced plastics -- Determination of compression-after-impact properties at a specified impact-energy level | 60.60 | 83.120 | ISO/TC 61/SC 13 |
| ISO 18872:2007 Plastics -- Determination of tensile properties at high strain rates | 90.93 | 83.080.10 | ISO/TC 61/SC 2 |
| ISO/TR 19032:2006 Plastics -- Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions | 90.20 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 19212:2006 Adhesives -- Determination of temperature dependence of shear strength | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 19252:2008 Plastics -- Determination of scratch properties | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 19712-1:2008 Plastics -- Decorative solid surfacing materials -- Part 1: Classification and specifications | 90.93 | 83.140.20 | ISO/TC 61/SC 11 |
| ISO 19712-2:2007 Plastics -- Decorative solid surfacing materials -- Part 2: Determination of properties -- Sheet goods | 90.93 | 83.140.20 | ISO/TC 61/SC 11 |
| ISO 19712-3:2007 Plastics -- Decorative solid surfacing materials -- Part 3: Determination of properties -- Solid surface shapes | 90.93 | 83.140.20 | ISO/TC 61/SC 11 |
| ISO 20200:2004 Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test | 90.92 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 20392:2007 Thermal-insulating materials -- Determination of compressive creep | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 20393:2007 Thermal-insulating materials -- Determination of long-term water absorption by diffusion | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 20394:2007 Thermal-insulating materials -- Determination of freeze-thaw resistance | 90.93 | 83.100 | ISO/TC 61/SC 10 |
| ISO 20753:2008 Plastics -- Test specimens | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 20965:2005 Plastics -- Determination of the transient extensional viscosity of polymer melts | 90.20 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 21048:2004 Plastics -- Epoxy resins -- Determination of 1,2-glycol content | 90.92 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 21318:2007 Plastics -- Epoxy resins -- Determination of electrical conductivity of aqueous resin extracts | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 21367:2007 Plastics -- Reaction to fire -- Test method for flame spread and combustion product release from vertically oriented specimens | 90.93 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| ISO 21368:2005 Adhesives -- Guidelines for the fabrication of adhesively bonded structures and reporting procedures suitable for the risk evaluation of such structures | 90.20 | 83.180 | ISO/TC 61/SC 11 |
| ISO 21509:2006 Plastics and ebonite -- Verification of Shore durometers | 90.93 | 83.080.01 | ISO/TC 61/SC 2 |
| ISO 21627-1:2009 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 21627-2:2009 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 21627-3:2009 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine | 60.60 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 22007-1:2009 Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 1: General principles | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 22007-2:2008 Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method | 90.92 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 22007-3:2008 Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 3: Temperature wave analysis method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 22007-4:2008 Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method | 90.93 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO/TR 22007-5:2011 Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 22088-1:2006 Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 1: General guidance | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 22088-2:2006 Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 2: Constant tensile load method | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 22088-3:2006 Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 3: Bent strip method | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 22088-4:2006 Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 4: Ball or pin impression method | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 22088-5:2006 Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 5: Constant tensile deformation method | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 22088-6:2006 Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 6: Slow strain rate method | 90.93 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 22196:2011 Measurement of antibacterial activity on plastics and other non-porous surfaces | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 22314:2006 Plastics -- Glass-fibre-reinforced products -- Determination of fibre length | 90.92 | 83.120 | ISO/TC 61/SC 13 |
| ISO 22498:2005 Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving | 90.20 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 22702:2003 Utility lighters -- General consumer-safety requirements | 90.20 | 97.180 | ISO/TC 61/SC 4 |
| ISO 22702:2003/Amd 1:2008 Clarification of requirements and addition of safety symbols | 60.60 | 97.180 | ISO/TC 61 |
| ISO 23559:2011 Plastics -- Film and sheeting -- Guidance on the testing of thermoplastic films | 60.60 | 83.140.10 | ISO/TC 61/SC 11 |
| ISO 23560:2008 Woven polypropylene sacks for bulk packaging of foodstuffs | 90.93 | 83.140.99 55.080 | ISO/TC 61/SC 11 |
| ISO 24538:2008 Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder | 90.93 | 83.080.20 | ISO/TC 61/SC 5 |
| ISO 25137-1:2009 Plastics -- Sulfone polymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 25137-2:2009 Plastics -- Sulfone polymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 25179:2010 Adhesives -- Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives | 60.60 | 83.180 | ISO/TC 61/SC 11 |
| ISO 25217:2009 Adhesives -- Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens | 60.60 | 83.180 | ISO/TC 61/SC 2 |
| ISO 25337:2010 Plastics -- Production quality control -- Statistical method for using single measurements | 60.60 | 83.080.01 | ISO/TC 61/SC 5 |
| ISO 25761:2008 Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen | 90.92 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 25762:2009 Plastics -- Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites | 60.60 | 13.220.40 83.080.01 | ISO/TC 61/SC 4 |
| ISO 26603:2008 Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of total chlorine | 90.93 | 83.080.10 | ISO/TC 61/SC 12 |
| ISO 26842-1:2009 Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 1: Resistance to delamination in non-severe environments | 90.92 | 83.180 | ISO/TC 61/SC 11 |
| ISO 26842-2:2009 Adhesives -- Test methods for the evaluation and selection of adhesives for indoor wood products -- Part 2: Resistance to delamination in severe environments | 90.92 | 83.180 | ISO/TC 61/SC 11 |
| ISO 27547-1:2010 Plastics -- Preparation of test specimens of thermoplastic materials using mouldless technologies -- Part 1: General principles, and laser sintering of test specimens | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 28078-1:2009 Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 28078-2:2009 Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties | 60.60 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 28941-1:2008 Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications | 90.93 | 83.080.20 | ISO/TC 61/SC 9 |
| ISO 29664:2010 Plastics -- Artificial weathering including acidic deposition | 60.60 | 83.080.01 | ISO/TC 61/SC 6 |
| ISO 29862:2007 Self adhesive tapes -- Determination of peel adhesion properties | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 29863:2007 Self adhesive tapes -- Measurement of static shear adhesion | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| ISO 29864:2007 Self adhesive tapes -- Measurement of breaking strength and elongation at break | 90.93 | 83.180 | ISO/TC 61/SC 11 |
| IEC 60695-11-10:1999 Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods | 60.60 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| IEC 60695-11-10:1999/Amd 1:2003 | 60.60 | 13.220.40 83.080.01 | ISO/TC 61/SC 4 |
| IEC 60695-11-20:1999 Fire hazard testing -- Part 11-20: Test flames -- 500 W flame test methods | 60.60 | 83.080.01 13.220.40 | ISO/TC 61/SC 4 |
| IEC 60695-11-20:1999/Amd 1:2003 | 60.60 | 13.220.40 83.080.01 | ISO/TC 61/SC 4 |
