Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 6336-1:2006 Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors | 90.93 | 21.200 |
| ISO 6336-1:2006/Cor 1:2008 | 60.60 | 21.200 |
| ISO 6336-2:2006 Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting) | 90.93 | 21.200 |
| ISO 6336-2:2006/Cor 1:2008 | 60.60 | 21.200 |
| ISO 6336-3:2006 Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength | 90.93 | 21.200 |
| ISO 6336-3:2006/Cor 1:2008 | 60.60 | 21.200 |
| ISO 6336-5:2003 Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials | 90.92 | 21.200 |
| ISO 6336-6:2006 Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load | 90.93 | 21.200 |
| ISO 6336-6:2006/Cor 1:2007 | 60.60 | 21.200 |
| ISO 9083:2001 Calculation of load capacity of spur and helical gears -- Application to marine gears | 90.93 | 47.020.05 21.200 |
| ISO 9085:2002 Calculation of load capacity of spur and helical gears -- Application for industrial gears | 90.93 | 21.200 |
| ISO 10300-1:2001 Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors | 90.92 | 21.200 |
| ISO 10300-2:2001 Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting) | 90.92 | 21.200 |
| ISO 10300-3:2001 Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength | 90.92 | 21.200 |
| ISO 13691:2001 Petroleum and natural gas industries -- High-speed special-purpose gear units | 90.93 | 21.200 |
| ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 1: Flash temperature method | 90.93 | 21.200 |
| ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears -- Part 2: Integral temperature method | 90.93 | 21.200 |
| ISO 14104:1995 Gears -- Surface temper etch inspection after grinding | 90.92 | 21.200 |
| ISO/TR 14179-1:2001 Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature | 90.60 | 21.200 |
| ISO/TR 14179-2:2001 Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity | 90.60 | 21.200 |
| ISO 14635-1:2000 Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils | 90.93 | 21.200 |
| ISO 14635-2:2004 Gears -- FZG test procedures -- Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils | 90.93 | 21.200 |
| ISO 14635-3:2005 Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases | 90.93 | 21.200 |
| ISO/TR 15144-1:2010 Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles | 60.60 | 21.200 |
| ISO/TR 18792:2008 Lubrication of industrial gear drives | 90.60 | 21.200 |
| ISO/TR 22849:2011 Design recommendations for bevel gears | 60.60 | 21.200 |
| ISO 23509:2006 Bevel and hypoid gear geometry | 90.92 | 21.200 |
