Home

Standards catalogue

Subscribe to updates

ISO/TC 60/SC 2  - Gear capacity calculation

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 60/SC 2 Secretariat

Standard and/or projectStageICS
ISO 6336-1:2006
Calculation of load capacity of spur and helical gears -- Part 1: Basic principles, introduction and general influence factors
90.93 21.200
ISO 6336-1:2006/Cor 1:2008
60.60 21.200
ISO 6336-2:2006
Calculation of load capacity of spur and helical gears -- Part 2: Calculation of surface durability (pitting)
90.93 21.200
ISO 6336-2:2006/Cor 1:2008
60.60 21.200
ISO 6336-3:2006
Calculation of load capacity of spur and helical gears -- Part 3: Calculation of tooth bending strength
90.93 21.200
ISO 6336-3:2006/Cor 1:2008
60.60 21.200
ISO/CD 6336-5
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
30.60 21.200
ISO 6336-5:2003
Calculation of load capacity of spur and helical gears -- Part 5: Strength and quality of materials
90.92 21.200
ISO 6336-6:2006
Calculation of load capacity of spur and helical gears -- Part 6: Calculation of service life under variable load
90.93 21.200
ISO 6336-6:2006/Cor 1:2007
60.60 21.200
ISO 9083:2001
Calculation of load capacity of spur and helical gears -- Application to marine gears
90.93 47.020.05
21.200
ISO 9085:2002
Calculation of load capacity of spur and helical gears -- Application for industrial gears
90.93 21.200
ISO 10300-1:2014
Calculation of load capacity of bevel gears -- Part 1: Introduction and general influence factors
60.60 21.200
ISO 10300-2:2014
Calculation of load capacity of bevel gears -- Part 2: Calculation of surface durability (pitting)
60.60 21.200
ISO 10300-3:2014
Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth root strength
60.60 21.200
ISO 13691:2001
Petroleum and natural gas industries -- High-speed special-purpose gear units
90.93 21.200
ISO 14104:2014
Gears -- Surface temper etch inspection after grinding, chemical method
60.60 21.200
ISO/TR 14179-1:2001
Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal equilibrium at 95 °C sump temperature
90.93 21.200
ISO/TR 14179-2:2001
Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity
90.93 21.200
ISO 14635-1:2000
Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils
90.93 21.200
ISO 14635-2:2004
Gears -- FZG test procedures -- Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
90.93 21.200
ISO 14635-3:2005
Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
90.93 21.200
ISO/TR 15144-1
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
60.00 21.200
ISO/TR 15144-1:2010
Calculation of micropitting load capacity of cylindrical spur and helical gears -- Part 1: Introduction and basic principles
90.92 21.200
ISO/TR 15144-2
Calculation of micro-pitting load capacity of cylindrical spur and helical gears -- Part 2: Examples of calculation for micropitting
60.00 21.200
ISO/TR 18792:2008
Lubrication of industrial gear drives
90.93 21.200
ISO/TR 22849:2011
Design recommendations for bevel gears
60.60 21.200
ISO 23509:2006
Bevel and hypoid gear geometry
90.92 21.200
ISO/CD 23509
Bevel and hypoid gear geometry
30.60 21.200