Home

Standards catalogue

Subscribe to updates

ISO/TC 45  - Rubber and rubber products

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 45 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO/NP 34-1
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces
10.99 83.060ISO/TC 45/SC 2
ISO/NP 34-2
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces
10.99 83.060ISO/TC 45/SC 2
ISO/NP 35
Natural rubber latex concentrate -- Determination of mechanical stability
10.99 83.040.10ISO/TC 45/SC 3
ISO/CD 48
Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)
30.00 83.060ISO/TC 45/SC 2
ISO/DIS 249
Rubber, raw natural -- Determination of dirt content
40.60 83.040.10ISO/TC 45/SC 2
ISO/DIS 815-1
Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures
40.60 83.060ISO/TC 45/SC 2
ISO/DIS 815-2
Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures
40.99 83.060ISO/TC 45/SC 2
ISO/NP 1420
Rubber- or plastics-coated fabrics -- Determination of resistance to penetration by water
10.99ISO/TC 45/SC 4
ISO/CD 1421
Rubber- or plastics-coated fabrics -- Determination of tensile strength and elongation at break
30.20 59.080.40ISO/TC 45/SC 4
ISO/DIS 1434
Natural rubber in bales -- Amount of bale coating -- Determination
40.60 83.060ISO/TC 45/SC 3
ISO/DIS 1656
Rubber, raw natural, and rubber latex, natural -- Determination of nitrogen content
40.60 83.040.10ISO/TC 45/SC 2
ISO/DIS 1817
Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids
40.20 83.060ISO/TC 45/SC 2
ISO/DIS 1823.2
Rubber hose and hose assemblies for oil suction and discharge service -- Specification
40.20 75.200
83.140.40
ISO/TC 45/SC 1
ISO/PRF 2000
Rubber, raw natural -- Guidelines for the specification of technically specified rubber (TSR)
50.20 83.040.10ISO/TC 45/SC 3
ISO/DIS 2005
Rubber latex, natural, concentrate -- Determination of sludge content
40.00 83.040.10ISO/TC 45/SC 3
ISO/CD 2286-1
Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 1: Methods for determination of length, width and net mass
30.20 59.080.40ISO/TC 45/SC 4
ISO/CD 2286-2
Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
30.20 59.080.40ISO/TC 45/SC 4
ISO/CD 2286-3
Rubber- or plastics-coated fabrics -- Determination of roll characteristics -- Part 3: Method for determination of thickness
30.20 59.080.40ISO/TC 45/SC 4
ISO/DIS 2302
Isobutene-isoprene rubber (IIR) -- Evaluation procedures
40.20 83.060ISO/TC 45/SC 3
ISO 2440:1997/FDAmd 2
50.00 83.100ISO/TC 45/SC 4
ISO/CD 2782-1
Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods
30.20 83.060ISO/TC 45/SC 2
ISO/DIS 3302-1
Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
40.99 83.140.01ISO/TC 45/SC 4
ISO/FDIS 3385
Flexible cellular polymeric materials -- Determination of fatigue by constant-load pounding
50.20 83.100ISO/TC 45/SC 4
ISO 3994
Plastics hoses -- Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials -- Specification
60.00 23.040.70ISO/TC 45/SC 1
ISO/DIS 4097
Rubber, ethylene-propylene-diene (EPDM) -- Evaluation procedure
40.20 83.060ISO/TC 45/SC 3
ISO/CD 4633
Rubber seals -- Joint rings for water supply, drainage and sewerage pipelines -- Specification for materials
30.00 83.140.50
91.140.60
91.140.80
ISO/TC 45/SC 4
ISO/DIS 4659
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) -- Evaluation procedure
40.20 83.060ISO/TC 45/SC 3
ISO/CD 4674-1
Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 1: Constant rate of tear methods
30.20 59.080.40ISO/TC 45/SC 4
ISO/DIS 5772
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems -- Specification
40.60 75.200
83.140.40
ISO/TC 45/SC 1
ISO/DIS 5794-2
Rubber compounding ingredients -- Silica, precipitated, hydrated -- Part 2: Evaluation procedures in styrene-butadiene rubber
40.00 83.040.20ISO/TC 45/SC 3
ISO/DIS 6101-3
Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content
40.60 83.060ISO/TC 45/SC 2
ISO/DIS 6101-4
Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content
40.60 83.060ISO/TC 45/SC 2
ISO/CD 6133
Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
30.20 83.060
83.080.01
ISO/TC 45/SC 2
ISO/CD 6134
Rubber hoses and hose assemblies for saturated steam -- Specification
30.99 23.040.70ISO/TC 45/SC 1
ISO/CD 6505
Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals
30.20 83.060ISO/TC 45/SC 2
ISO/CD 6802
Rubber and plastics hoses and hose assemblies with wire reinforcements -- Hydraulic impulse test with flexing
30.99 23.040.70ISO/TC 45/SC 1
ISO/FDIS 6806
Rubber hoses and hose assemblies for use in oil burners -- Specification
50.20 83.140.40
27.060.10
ISO/TC 45/SC 1
ISO/FDIS 6808
Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids -- Specification
50.20 83.140.40
75.200
ISO/TC 45/SC 1
ISO/CD 7229
Rubber- or plastics-coated fabrics -- Measurement of gas permeability
30.00 59.080.40ISO/TC 45/SC 4
ISO/DIS 7663
Halogenated isobutene-isoprene rubber (BIIR and CIIR) -- Evaluation procedures
40.20 83.060ISO/TC 45/SC 3
ISO 8029
Plastics hose -- General-purpose collapsible water hose, textile-reinforced -- Specification
60.00 23.040.70ISO/TC 45/SC 1
ISO/FDIS 8030
Rubber and plastics hoses -- Method of test for flammability
50.20 23.040.70
13.220.40
ISO/TC 45/SC 1
ISO/FDIS 8330
Rubber and plastics hoses and hose assemblies -- Vocabulary
50.60 23.040.70
01.040.23
ISO/TC 45/SC 1
ISO/CD 9631
Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 degrees C -- Specification for the material
30.00 83.140.50ISO/TC 45/SC 4
ISO/CD 11344
Rubber, raw synthetic -- Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
30.99 83.040.10ISO/TC 45/SC 2
ISO/DIS 11346
Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use
40.60 83.060ISO/TC 45/SC 2
ISO/DIS 11759
Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) -- Specification
40.99 75.200
83.140.40
ISO/TC 45/SC 1
ISO/DIS 13363
Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification
40.60 83.140.40
47.080
ISO/TC 45/SC 1
ISO/DIS 13775-1
Thermoplastic tubing and hoses for automotive use -- Part 1: Non-fuel applications
40.00 43.040.01
83.140.40
83.140.30
ISO/TC 45/SC 1
ISO/AWI 13775-2
Thermoplastic tubing and hoses for automotive use -- Part 2: Petroleum-based-fuel applications
20.00 83.140.40
83.140.30
43.060.40
ISO/TC 45/SC 1
ISO/DIS 15825
Rubber compounding ingredients -- Carbon black -- Determination of aggregate size distribution by disc centrifuge photosedimentometry
40.20 83.040.20ISO/TC 45/SC 3
ISO/DIS 17324
Rubber hoses for automotive turbochargers -- Specification
40.20 43.040.01
83.140.40
ISO/TC 45/SC 1
ISO/NP 17717
Meteorological balloon -- Specification
10.99ISO/TC 45/SC 4
ISO/DIS 18064
Thermoplastic elastomers -- Nomenclature and abbreviated terms
40.99 01.040.83
83.080.20
ISO/TC 45
ISO/CD 18517
Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
30.20 83.060ISO/TC 45/SC 2
ISO/DIS 18766
Rubber, vulcanized or thermoplastic -- Low temperature testing -- General introduction and guide
40.20 83.060ISO/TC 45/SC 2
ISO/CD 18852
Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
30.20 83.040.20ISO/TC 45/SC 3
ISO/CD 18898
Rubber -- Calibration and verification of hardness testers
30.20 83.060ISO/TC 45/SC 2
ISO/DIS 19013-2
Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 2: Gasoline fuels
40.00 27.020
83.140.40
ISO/TC 45/SC 1
ISO/DIS 19043
Rubber latex -- Determination of total phosphate content in latex by spectrophotometric method
40.00 83.040.10ISO/TC 45/SC 3
ISO/DIS 19050
Rubber- raw, vulcanised, thermoplastic -- Determination of metal content by ICP-OES
40.20 83.040.10ISO/TC 45/SC 2
ISO/CD 19051
Rubber, raw, latex -- Determination of nitrogen content by Micro Duma's Combustion method
30.60 83.040.10
83.060
ISO/TC 45/SC 2
ISO/DIS 19242
Rubber -- Determination of total sulfur content by ion chromatography
40.20 83.060ISO/TC 45/SC 2
ISO/NP 19246
Rubber compounding ingredients -- Silica -- Oil absorption of precipitated silica
10.99ISO/TC 45/SC 3
ISO/NP 19385
Rubber hoses and hose assemblies for Water Jetting or Water blasting applications
10.99ISO/TC 45/SC 1
ISO/CD 20299-2
Film for wrapping rubber bales -- Part 2: Natural rubber
30.00 83.040.01ISO/TC 45/SC 3
ISO/CD 21561-2
Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method
30.20 83.060ISO/TC 45/SC 2
ISO/DTS 22762-4
Elastomeric seismic-protection isolators -- Part 4: Guidance on the application of ISO 22762-3
30.60 83.140.99
91.120.25
ISO/TC 45/SC 4
ISO/DIS 23794
Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance
40.20 83.060ISO/TC 45/SC 2
ISO/FDIS 27126
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals -- Specification
50.20 83.140.40ISO/TC 45/SC 1
ISO/FDIS 27127
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas -- Specification
50.20 75.200
83.140.40
ISO/TC 45/SC 1
ISO 28017:2011/DAmd 1
40.20 83.140.40ISO/TC 45/SC 1