TC 33 - Refractories
Items to be displayed:
Standards and projects under the direct responsibility of TC 33 Secretariat
| Standard and/or project | ICS | |
|---|---|---|
| ISO 528:1983 Refractory products -- Determination of pyrometric cone equivalent (refractoriness) | 90.93 | 81.080 |
| ISO 836:2001 Terminology for refractories | 90.93 | 81.080 01.040.81 |
| ISO 1146:1988 Pyrometric reference cones for laboratory use -- Specification | 90.93 | 17.200.20 |
| ISO 1893:2007 Refractory products -- Determination of refractoriness under load -- Differential method with rising temperature | 60.60 | 81.080 |
| ISO 1927:1984 Prepared unshaped refractory materials (dense and insulating) -- Classification | 90.92 | 81.080 |
| ISO/DIS 1927-1 Unshaped refractory materials -- Part 1: Introduction and classification | 40.92 | 81.080 |
| ISO/DIS 1927-2 Unshaped refractory materials -- Part 2: Sampling for testing | 40.60 | 81.080 |
| ISO/DIS 1927-3 Unshaped refractory materials -- Part 3: Characterization as received | 40.60 | 81.080 |
| ISO/DIS 1927-4 Unshaped refractory materials -- Part 4: Determination of consistency of castables | 40.60 | 81.080 |
| ISO/DIS 1927-5 Unshaped refractory materials -- Part 5: Preparation and treatment of test pieces | 40.60 | 81.080 |
| ISO/DIS 1927-6 Unshaped refractory materials -- Part 6: Measurement of physical properties | 40.60 | 81.080 |
| ISO/DIS 1927-7 Unshaped refractory materials -- Part 7: Tests on pre-formed shapes | 40.60 | 81.080 |
| ISO/DIS 1927-8 Unshaped refractory materials -- Part 8: Determination of complementary properties | 40.60 | 81.080 |
| ISO 2245:2006 Shaped insulating refractory products -- Classification | 90.20 | 81.080 |
| ISO 2477:2005 Shaped insulating refractory products -- Determination of permanent change in dimensions on heating | 90.93 | 81.080 |
| ISO 2478:1987 Dense shaped refractory products -- Determination of permanent change in dimensions on heating | 90.93 | 81.080 |
| ISO 3187:1989 Refractory products -- Determination of creep in compression | 90.93 | 81.080 |
| ISO 5013:1985 Refractory products -- Determination of modulus of rupture at elevated temperatures | 90.93 | 81.080 |
| ISO 5014:1997 Dense and insulating shaped refractory products -- Determination of modulus of rupture at ambient temperature | 90.93 | 81.080 |
| ISO 5016:1997 Shaped insulating refractory products -- Determination of bulk density and true porosity | 90.93 | 81.080 |
| ISO 5017:1998 Dense shaped refractory products -- Determination of bulk density, apparent porosity and true porosity | 90.93 | 81.080 |
| ISO 5018:1983 Refractory materials -- Determination of true density | 90.93 | 81.080 |
| ISO 5019-1:1984 Refractory bricks -- Dimensions -- Part 1: Rectangular bricks | 90.93 | 81.080 |
| ISO 5019-2:1984 Refractory bricks -- Dimensions -- Part 2: Arch bricks | 90.93 | 81.080 |
| ISO 5019-3:1984 Refractory bricks -- Dimensions -- Part 3: Rectangular checker bricks for regenerative furnaces | 90.93 | 81.080 |
| ISO 5019-4:1988 Refractory bricks -- Dimensions -- Part 4: Dome bricks for electric arc furnace roofs | 90.93 | 81.080 |
| ISO 5019-5:1984 Refractory bricks -- Dimensions -- Part 5: Skewbacks | 90.93 | 81.080 |
| ISO 5019-6:2005 Refractory bricks -- Dimensions -- Part 6: Basic bricks for oxygen steel-making converters | 90.93 | 81.080 |
| ISO 5022:1979 Shaped refractory products -- Sampling and acceptance testing | 90.93 | 81.080 |
| ISO 5417:1986 Refractory bricks for use in rotary kilns -- Dimensions | 90.93 | 81.080 |
| ISO 8656-1:1988 Refractory products -- Sampling of raw materials and unshaped products -- Part 1: Sampling scheme | 90.93 | 81.080 |
| ISO 8840:1987 Refractory materials -- Determination of bulk density of granular materials (grain density) | 90.93 | 81.080 |
| ISO 8841:1991 Dense, shaped refractory products -- Determination of permeability to gases | 90.93 | 81.080 |
| ISO 8890:1988 Dense shaped refractory products -- Determination of resistance to sulfuric acid | 90.93 | 81.080 |
| ISO/DIS 8894-1 Refractory materials -- Determination of thermal conductivity -- Part 1: Hot-wire (cross-array) and resistance thermometer methods | 40.99 | 81.080 |
| ISO 8894-1:1987 Refractory materials -- Determination of thermal conductivity -- Part 1: Hot-wire method (cross-array) | 90.92 | 81.080 |
| ISO 8894-2:2007 Refractory materials -- Determination of thermal conductivity -- Part 2: Hot-wire method (parallel) | 60.60 | 81.080 |
| ISO 8895:2004 Shaped insulating refractory products -- Determination of cold crushing strength | 90.93 | 81.080 |
| ISO 9205:1988 Refractory bricks for use in rotary kilns -- Hot-face identification marking | 90.93 | 81.080 |
| ISO 10058-1:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) -- Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica | 60.60 | 73.080 |
| ISO 10058-2:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) -- Part 2: Wet chemical analysis | 60.60 | 73.080 |
| ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) -- Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) | 60.60 | 73.080 |
| ISO 10059-1:1992 Dense, shaped refractory products -- Determination of cold compressive strength -- Part 1: Referee test without packing | 90.93 | 81.080 |
| ISO 10059-2:2003 Dense, shaped refractory products -- Determination of cold compressive strength -- Part 2: Test with packing | 90.93 | 81.080 |
| ISO 10060:1993 Dense, shaped refractory products -- Test methods for products containing carbon | 90.93 | 81.080 |
| ISO 10080:1990 Refractory products -- Classification of dense, shaped acid-resisting products | 90.93 | 81.080 |
| ISO 10081-1:2003 Classification of dense shaped refractory products -- Part 1: Alumina-silica | 90.93 | 81.080 |
| ISO 10081-2:2003 Classification of dense shaped refractory products -- Part 2: Basic products containing less than 7 % residual carbon | 90.93 | 81.080 |
| ISO 10081-2:2003/Cor 1:2008 | 60.60 | 81.080 |
| ISO 10081-3:2003 Classification of dense shaped refractory products -- Part 3: Basic products containing from 7 % to 50 % residual carbon | 90.93 | 81.080 |
| ISO 10081-4:2007 Classification of dense shaped refractory products -- Part 4: Special products | 60.60 | 81.080 |
| ISO 10635:1999 Refractory products -- Methods of test for ceramic fibre products | 90.20 | 81.080 |
| ISO 12676:2000 Refractory products -- Determination of resistance to carbon monoxide | 90.92 | 81.080 |
| ISO/AWI 12676 Refractory products -- Determination of resistance to carbon monoxide | 20.00 | 81.080 |
| ISO 12677:2003 Chemical analysis of refractory products by XRF -- Fused cast bead method | 90.92 | 81.080 |
| ISO/DIS 12677 Chemical analysis of refractory products by X-ray fluorescence (XRF) -- Fused cast-bead method | 40.20 | 81.080 |
| ISO 12678-1:1996 Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 1: Dimensions and conformity to drawings | 90.93 | 81.080 |
| ISO 12678-2:1996 Refractory products -- Measurement of dimensions and external defects of refractory bricks -- Part 2: Corner and edge defects and other surface imperfections | 90.93 | 81.080 |
| ISO 12680-1:2005 Methods of test for refractory products -- Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration | 90.93 | 81.080 |
| ISO 13765-1:2004 Refractory mortars -- Part 1: Determination of consistency using the penetrating cone method | 90.93 | 81.080 |
| ISO 13765-2:2004 Refractory mortars -- Part 2: Determination of consistency using the reciprocating flow table method | 90.93 | 81.080 |
| ISO 13765-3:2004 Refractory mortars -- Part 3: Determination of joint stability | 90.93 | 81.080 |
| ISO 13765-4:2004 Refractory mortars -- Part 4: Determination of flexural bonding strength | 90.93 | 81.080 |
| ISO 13765-5:2004 Refractory mortars -- Part 5: Determination of grain size distribution (sieve analysis) | 90.93 | 81.080 |
| ISO 13765-6:2004 Refractory mortars -- Part 6: Determination of moisture content of ready-mixed mortars | 90.93 | 81.080 |
| ISO 16282:2007 Methods of test for dense shaped refractory products -- Determination of resistance to abrasion at ambient temperature | 60.60 | 81.080 |
| ISO 20182:2008 Refractory test-piece preparation -- Gunning refractory panels by the pneumatic-nozzle mixing type guns | 60.60 | 81.080 |
| ISO 20565-1:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) -- Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica | 60.60 | 81.080 |
| ISO 20565-2:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) -- Part 2: Wet chemical analysis | 60.60 | 81.080 |
| ISO 20565-3:2008 Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) -- Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) | 60.60 | 81.080 |
| ISO 21068-1:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -- Part 1: General information and sample preparation | 60.60 | 81.080 |
| ISO 21068-2:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -- Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon | 60.60 | 81.080 |
| ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -- Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents | 60.60 | 81.080 |
| ISO 21078-1:2008 Determination of boron (III) oxide in refractory products -- Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes | 60.60 | 81.060.01 81.040.01 |
| ISO 21078-2:2006 Determination of boron(III) oxide in refractory products -- Part 2: Acid extraction method for the determination of boron(III) oxide in binder components | 90.20 | 81.040.01 81.060.01 |
| ISO 21079-1:2008 Chemical analysis of refractories containing alumina, zirconia and silica -- Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) -- Part 1: Apparatus, reagents and dissolution | 60.60 | 81.080 71.040.40 |
| ISO 21079-2:2008 Chemical analysis of refractories containing alumina, zirconia, and silica -- Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) -- Part 2: Wet chemical analysis | 60.60 | 71.040.40 81.080 |
| ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica -- Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) -- Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES) | 60.60 | 71.040.40 81.080 |
| ISO 21587-1:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) -- Part 1: Apparatus, reagents, dissolution and gravimetric silica | 60.60 | 81.080 |
| ISO 21587-2:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) -- Part 2: Wet chemical analysis | 60.60 | 81.080 |
| ISO 21587-3:2007 Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) -- Part 3: Inductively coupled plasma and atomic absorption spectrometry methods | 60.60 | 81.080 |
| ISO/DIS 21828 Guidance on standards available for preparation and testing of unshaped refractory products | 40.60 | 81.080 |
| ISO 26845:2008 Chemical analysis of refractories -- General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods | 60.60 | 81.080 |
News feeds
