Home

Standards catalogue

Subscribe to updates

ISO/TC 29  - Small tools

Items to be displayed:


Standards and projects under the direct responsibility of ISO/TC 29 Secretariat and its SCs

Standard and/or projectStageICSTC
ISO/DIS 235
Parallel shank jobber and stub series drills and Morse taper shank drills
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 238
Reduction sleeves and extension sockets for tools with Morse taper shanks
40.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 240
Milling cutters -- Interchangeability dimensions for cutter arbors or cutter mandrels
40.99 25.100.20ISO/TC 29/SC 2
ISO/DIS 494
Cylindrical shank twist drills -- Long series
40.99 25.100.30ISO/TC 29/SC 9
ISO/DIS 866
Centre drills for centre holes without protecting chamfers -- Type A
40.99 25.100.30ISO/TC 29/SC 2
ISO/CD 1085
Assembly tools for screws and nuts -- Double-ended wrenches -- Size pairing
30.20 25.140.30ISO/TC 29/SC 10
ISO/DIS 1641-1
End mills and slot drills -- Part 1: Milling cutters with cylindrical shanks
40.99 25.100.20ISO/TC 29/SC 9
ISO/DIS 2250
Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
40.99 25.100.30ISO/TC 29/SC 9
ISO/DIS 2540
Centre drills for centre holes with protecting chamfer -- Type B
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 2541
Centre drills for centre holes with radius form -- Type R
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 2584
Cylindrical cutters with plain bore and key drive -- Metric series
40.99 25.100.20ISO/TC 29/SC 2
ISO/DIS 3286
Single point cutting tools -- Corner radii
40.99 25.100.01ISO/TC 29/SC 9
ISO/DIS 3291
Extra-long Morse taper shank twist drills
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 3292
Extra-long parallel shank twist drills
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 3293
Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
40.99 25.100.30ISO/TC 29/SC 9
ISO/DIS 3294
Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
40.99 25.100.30ISO/TC 29/SC 9
ISO/CD 3318
Assembly tools for screws and nuts -- Double-headed open-ended wrenches, double-headed box wrenches and combination wrenches -- Maximum widths of heads
30.20 25.140.30ISO/TC 29/SC 10
ISO/DIS 3338-1
Cylindrical shanks for milling cutters -- Part 1: Dimensional characteristics of plain cylindrical shanks
40.99 25.100.20ISO/TC 29/SC 2
ISO/DIS 3338-3
Cylindrical shanks for milling cutters -- Part 3: Dimensional characteristics of threaded shanks
40.99 25.100.20ISO/TC 29/SC 2
ISO/DIS 3365
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions
40.99 25.100.01ISO/TC 29/SC 9
ISO/DIS 3466
Machine taper pin reamers with parallel shanks
40.99 25.100.30ISO/TC 29/SC 9
ISO/DIS 3467
Machine taper pin reamers with Morse taper shanks
40.99 25.100.30ISO/TC 29/SC 9
ISO/DIS 4202
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
40.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 4204
Countersinks, 90 degrees, with Morse taper shanks and detachable pilots
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 4205
Countersinks, 90 degrees, with parallel shanks and solid pilots
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 4206
Counterbores with parallel shanks and solid pilots
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 4207
Counterbores with Morse taper shanks and detachable pilots
40.99 25.060.20ISO/TC 29/SC 2
ISO/CD 4229
Assembly tools for screws and nuts -- Single-head engineer's wrenches for lower torque applications -- Maximum outside dimensions of heads and test torques
30.20 25.140.30ISO/TC 29/SC 10
ISO/DIS 5611-1
Cartridges, type A, for indexable inserts -- Dimensions -- Part 1: General survey; correlation of dimensions
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-2
Cartridges, type A, for indexable inserts -- Dimensions -- Part 2: Style F
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-3
Cartridges, type A, for indexable inserts -- Dimensions -- Part 3: Style G
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-4
Cartridges type A for indexable inserts -- Part 4: Style J
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-5
Cartridges type A for indexable inserts -- Part 5: Style K
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-6
Cartridges type A for indexable inserts -- Part 6: Style L
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-7
Cartridges, type A, for indexable inserts -- Dimensions -- Part 7: Style R
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-8
Cartridges, type A, for indexable inserts -- Dimensions -- Part 8: Style S
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-9
Cartridges, type A, for indexable inserts -- Dimensions -- Part 9: Style T
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-10
Cartridges type A for indexable inserts -- Part 10: Style U
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-11
Cartridges type A for indexable inserts -- Part 11: Style W
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 5611-12
Cartridges type A for indexable inserts -- Part 12: Style Y
40.60 25.100.01ISO/TC 29/SC 9
ISO/DIS 6789-1
Assembly tools for screws and nuts -- Hand torque tools -- Part 1: Requirements and method for design conformance testing and quality conformance testing -- Minimum requirements for calibration and calibration certificates
40.60 25.140.30ISO/TC 29/SC 10
ISO/DIS 6789-2
Assembly tools for screws and nuts -- Hand torque tools -- Part 2: Requirements for calibration and determination of measurement uncertainly
40.60 25.140.30ISO/TC 29/SC 10
ISO/DIS 7079
Core drills with parallel shanks and with Morse taper shanks
40.99 25.100.30ISO/TC 29/SC 2
ISO/DIS 7388-3
Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs of forms AD, AF, UC, UD, UF, JD and JF
40.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 8051
Long shank taps with nominal diameters from M3 to M10 -- Full-diameter shank taps with recess
40.99 25.100.50ISO/TC 29/SC 2
ISO/DIS 9242
Pliers and nippers -- Construction worker's pincers -- Dimensions and test values
40.00 25.140.30ISO/TC 29/SC 10
ISO/DIS 10145-1
End mills with brazed helical hardmetal tips -- Part 1: Dimensions of end mills with parallel shank
40.99 25.100.20ISO/TC 29/SC 9
ISO/DIS 10145-2
End mills with brazed helical hardmetal tips -- Part 2: Dimensions of end mills with 7/24 taper shank
40.99 25.100.20ISO/TC 29/SC 9
ISO/NP 10243
Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding
10.99 25.120.10
01.070
ISO/TC 29/SC 8
ISO/DIS 10889-2
Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs
40.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 10889-3
Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat
40.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 10889-4
Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat
40.99 25.060.20ISO/TC 29/SC 2
ISO/NP 10889-5
Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat
10.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 10889-6
Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat
40.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 10889-7
Tool holders with cylindrical shank -- Part 7: Type F with taper seat
40.99 25.060.20ISO/TC 29/SC 2
ISO/NP 10897
Collets for tool holders with taper ratio 1:10 -- Collets, hoders, nuts
10.99 25.060.20ISO/TC 29
ISO/DIS 10898
Spot drills
40.99 25.100.30ISO/TC 29/SC 9
ISO/DIS 12197
Woodruff keaseat cutters -- Dimensions
40.99 25.100.20ISO/TC 29/SC 2
ISO/NP TS 13399-60
Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems
10.99 25.100.01
35.240.50
ISO/TC 29
ISO/NP TS 13399-70
Cutting tool data representation and exchange -- Part 70: Graphical data layout -- Layer settings for tooldesigns
10.99ISO/TC 29
ISO/NP TS 13399-71
Cutting tool data representation and exchange -- Part 71: Graphical data layout - Creation of documents for the standardized data exchange - Graphical product information
10.99ISO/TC 29
ISO/NP TS 13399-72
Cutting tool data representation and exchange -- Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and thei XML-data exchange
10.99ISO/TC 29
ISO/NP TS 13399-80
Cutting tool data representation and exchange -- Part 80: Creation and exchange of 3D models -- Overview and principles
10.99 25.100.01
35.240.50
ISO/TC 29
ISO/NP TS 13399-100
Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries
10.99 25.100.01
35.240.50
ISO/TC 29
ISO/DTS 13399-202
Cutting tool data representation and exchange -- Part 202: Creation and exchange of 3D models -- Irregular inserts
30.99 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-203
Cutting tool data representation and exchange -- Part 203: Creation and exchange of 3D models -- Replaceable inserts for drilling
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-204
Cutting tool data representation and exchange -- Part 204: Creation and exchange of 3D models -- Inserts for reaming
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/DTS 13399-303
Cutting tool data representation and exchange -- Part 303: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of end mills with solid cutting edges
30.60 25.100.01
35.240.50
ISO/TC 29
ISO/DTS 13399-304
Cutting tool data representation and exchange -- Part 304: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of milling cutters with arbor hole and solid cutting edges
30.60 25.100.01
35.240.50
ISO/TC 29
ISO/NP TS 13399-305
Cutting tool data representation and exchange -- Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
10.99ISO/TC 29
ISO/DTS 13399-307
Cutting tool data representation and exchange -- Part 307: Creation and exchange of 3D models - End mills for indexable inserts
30.60 25.100.01
35.240.50
ISO/TC 29
ISO/NP TS 13399-308
Cutting tool data representation and exchange -- Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
10.99 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-309
Cutting tool data representation and exchange -- Part 309: Creation and exchange of 3D models -- Tool holders for indexable inserts
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/NP TS 13399-310
Cutting tool data representation and exchange -- Part 310: Creation and exchange of 3D models -- Turning tools with carbide tips
10.99ISO/TC 29
ISO/DTS 13399-311
Cutting tool data representation and exchange -- Part 311: Cretation and exchange of 3D models - Solid reamers
30.60 25.100.01
35.240.50
ISO/TC 29
ISO/DTS 13399-312
Cutting tool data representation and exchange -- Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
30.60 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-401
Cutting tool data representation and exchange -- Part 401: Creation and exchange of 3D models -- Converting, extending and reducing adaptive items
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/CD TS 13399-405
Cutting tool data representation and exchange -- Part 405: Creation and exchange of 3D models -- Collets
30.00 25.100.01
35.240.50
ISO/TC 29
ISO/DIS 15488
Collets with 8 degree setting angle for tool shanks -- Collets, nuts and fitting dimensions
40.99 25.060.20ISO/TC 29/SC 2
ISO/DIS 16916
Tools for moulding -- Tool specification sheet for injection moulds
40.99 25.120.30ISO/TC 29/SC 8
ISO 21538:2004/DAmd 1
40.20 25.100.70ISO/TC 29/SC 5
ISO/DIS 22917
Superabrasives -- Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride
40.00 25.100.70ISO/TC 29/SC 5
ISO/CD 26622-1
Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks
30.99 25.060.20ISO/TC 29