TC 29 - Small tools
Items to be displayed:
Subcommittees
| Subcommittee | Subcommittee Title |
|---|---|
| TC 29/SC 2 | High speed steel cutting tools and their attachments |
| TC 29/SC 5 | Grinding wheels and abrasives |
| TC 29/SC 8 | Tools for pressing and moulding |
| TC 29/SC 9 | Tools with cutting edges made of hard cutting materials |
| TC 29/SC 10 | Assembly tools for screws and nuts, pliers and nippers |
Standards and projects under the direct responsibility of TC 29 Secretariat
| Standard and/or project | ICS | |
|---|---|---|
| ISO 234-1:1983 Files and rasps -- Part 1: Dimensions | 90.93 | 25.100.60 |
| ISO 234-2:1982 Files and rasps -- Part 2: Characteristics of cut | 90.93 | 25.100.60 |
| ISO 237:1975 Rotating tools with parallel shanks -- Diameters of shanks and sizes of driving squares | 90.93 | 25.100.01 |
| ISO 239:1999 Drill chuck tapers | 90.93 | 25.100.30 |
| ISO 296:1991 Machine tools -- Self-holding tapers for tool shanks | 90.93 | 25.060.20 |
| ISO 297:1988 7/24 tapers for tool shanks for manual changing | 90.93 | 25.060.20 |
| ISO 1080:1975 Machine tools -- Morse taper shanks -- Cotter slots with taper keys | 90.93 | 25.060.20 |
| ISO 1180:1983 Shanks for pneumatic tools and fitting dimensions of chuck bushings | 90.93 | 25.140.10 |
| ISO 1180:1983/Add 1:1985 | 90.93 | 25.140.10 |
| ISO 1651:1974 Tube drawing mandrels | 90.93 | 25.120.20 |
| ISO 1651:1974/Amd 1:1982 | 60.60 | 25.120.20 |
| ISO 1684:1975 Wire, bar and tube drawing dies -- Specifications | 90.93 | 25.120.20 |
| ISO 1684:1975/Amd 2:1982 | 60.60 | 25.120.20 |
| ISO 2336-1:1996 Hacksaw blades -- Part 1: Dimensions for hand blades | 90.93 | 25.100.40 |
| ISO 2336-2:2006 Hacksaw blades -- Part 2: Dimensions for machine blades | 90.20 | 25.100.40 |
| ISO 2726:1995 Woodworking tools -- Metal-bodied bench planes, plane cutters and cap irons | 90.93 | 79.120.20 |
| ISO 2729:1995 Woodworking tools -- Chisels and gouges | 90.93 | 79.120.20 |
| ISO 2730:1973 Woodworking tools -- Wooden bodied planes | 90.60 | 79.120.20 |
| ISO 2804:1996 Wire, bar or tube drawing dies -- As-sintered pellets of hardmetal (carbide) -- Dimensions | 90.93 | 25.120.20 |
| ISO 2924:1973 Solid and segmental circular saws for cold cutting of metals -- Interchangeability dimensions of the drive -- Saw diameter range 224 to 2 240 mm | 90.93 | 25.100.40 |
| ISO 2935:1974 Circular saw blades for woodworking -- Dimensions | 90.93 | 79.120.20 |
| ISO 3002-1:1982 Basic quantities in cutting and grinding -- Part 1: Geometry of the active part of cutting tools -- General terms, reference systems, tool and working angles, chip breakers | 90.93 | 01.060 25.100.01 |
| ISO 3002-1:1982/Amd 1:1992 | 60.60 | 01.060 25.100.01 |
| ISO 3002-2:1982 Basic quantities in cutting and grinding -- Part 2: Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles | 90.93 | 25.100.01 01.060 |
| ISO 3002-3:1984 Basic quantities in cutting and grinding -- Part 3: Geometric and kinematic quantities in cutting | 90.93 | 25.100.01 01.060 |
| ISO 3002-4:1984 Basic quantities in cutting and grinding -- Part 4: Forces, energy, power | 90.93 | 01.060 25.100.01 |
| ISO 3002-5:1989 Basic quantities in cutting and grinding -- Part 5: Basic terminology for grinding processes using grinding wheels | 90.93 | 01.040.25 01.060 25.100.01 |
| ISO 3295:1975 Narrow bandsaw blades for woodworking -- Dimensions | 90.93 | 79.120.20 |
| ISO 3685:1993 Tool-life testing with single-point turning tools | 90.60 | 25.100.10 |
| ISO 4875-1:2006 Metal-cutting band saw blades -- Part 1: Vocabulary | 90.20 | 01.040.25 25.100.40 |
| ISO 4875-2:2006 Metal-cutting band saw blades -- Part 2: Characteristics and dimensions | 90.20 | 25.100.40 |
| ISO 5396:1977 Hardmetal heading dies -- Terminology | 90.93 | 01.040.25 25.100.50 |
| ISO 5407:1981 As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances | 90.93 | 25.100.50 |
| ISO 5421:1977 Ground high speed steel tool bits | 90.93 | 25.100.10 |
| ISO 7294:1983 Saw teeth for woodworking saws -- Profile shape -- Terminology and designation | 90.93 | 79.120.20 01.040.79 |
| ISO 7388-1:2007 Tool shanks with 7/24 taper for automatic tool changers -- Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF | 60.60 | 25.060.20 |
| ISO 7388-2:2007 Tool shanks with 7/24 taper for automatic tool changers -- Part 2: Dimensions and designation of shanks of forms J, JD and JF | 60.60 | 25.060.20 |
| ISO 7388-3:2007 Tool shanks with 7/24 taper for automatic tool changers -- Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF | 60.60 | 25.060.20 |
| ISO 8688-1:1989 Tool life testing in milling -- Part 1: Face milling | 90.93 | 25.100.20 |
| ISO 8688-2:1989 Tool life testing in milling -- Part 2: End milling | 90.93 | 25.100.20 |
| ISO 9270:1992 7/24 tapers for tool shanks for automatic changing -- Tapers for spindle noses | 90.92 | 25.060.20 |
| ISO/DIS 9270-1 7/24 taper spindle noses for automatic tool changers -- Part 1: Dimensions and designation of spindle noses of forms S and SF | 40.99 | 25.060.20 |
| ISO/DIS 9270-2 7/24 taper spindle noses for automatic tool changers -- Part 2: Dimensions and designation of spindle noses of forms J and JF | 40.99 | 25.060.20 |
| ISO 9524:1993 Machine tools -- Front faces of spindle holders for machining centres -- Functional dimensions | 90.92 | 25.040.10 |
| ISO/NP 9524 Machine tools -- Front faces of spindle holders for machining centres -- Functional dimensions | 10.99 | 25.040.10 |
| ISO 10887:1999 Key type three-jaw drill chucks -- Specification | 90.93 | 25.100.30 |
| ISO 10888:1999 Keyless type three-jaw drill chucks -- Specification | 90.93 | 25.100.30 |
| ISO 10889-1:2004 Tool holders with cylindrical shank -- Part 1: Cylindrical shank, location bore -- Technical delivery conditions | 90.93 | 25.060.20 |
| ISO 10889-2:2004 Tool holders with cylindrical shank -- Part 2: Type A, shanks for tool holders of special designs | 90.93 | 25.060.20 |
| ISO 10889-3:2004 Tool holders with cylindrical shank -- Part 3: Type B with rectangular radial seat | 90.93 | 25.060.20 |
| ISO 10889-4:2004 Tool holders with cylindrical shank -- Part 4: Type C with rectangular axial seat | 90.93 | 25.060.20 |
| ISO 10889-5:1997 Tool holders with cylindrical shank -- Part 5: Type D with more than one rectangular seat | 90.60 | 25.060.20 |
| ISO 10889-6:2004 Tool holders with cylindrical shank -- Part 6: Type E with cylindrical seat | 90.93 | 25.060.20 |
| ISO 10889-7:2004 Tool holders with cylindrical shank -- Part 7: Type F with taper seat | 90.93 | 25.060.20 |
| ISO 10889-8:1997 Tool holders with cylindrical shank -- Part 8: Type Z, accessories | 90.93 | 25.060.20 |
| ISO 10897:1996 Collets for tool holders with taper ratio 1:10 -- Collets, hoders,nuts | 90.92 | 25.060.20 |
| ISO 11054:2006 Cutting tools -- Designation of high-speed steel groups | 90.60 | 77.140.35 25.100.01 |
| ISO 12164-1:2001 Hollow taper interface with flange contact surface -- Part 1: Shanks -- Dimensions | 90.93 | 25.060.20 |
| ISO 12164-2:2001 Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions | 90.93 | 25.060.20 |
| ISO 12164-3:2008 Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools | 60.60 | 25.060.20 |
| ISO 12164-4:2008 Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools | 60.60 | 25.060.20 |
| ISO 13399-1:2006 Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and general information model | 90.60 | 25.100.01 35.240.50 |
| ISO 13399-1:2006/DAmd 1 | 40.60 | 35.240.50 25.100.01 |
| ISO 13399-1:2006/Cor 1:2008 | 60.60 | 35.240.50 25.100.01 |
| ISO/NP TS 13399-2 Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items | 10.99 | 25.100.01 35.240.50 |
| ISO/TS 13399-2:2005 Cutting tool data representation and exchange -- Part 2: Reference dictionary for the cutting items | 90.92 | 35.240.50 25.100.01 |
| ISO/TS 13399-3:2007 Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items | 90.92 | 25.100.01 35.240.50 |
| ISO/NP TS 13399-3 Cutting tool data representation and exchange -- Part 3: Reference dictionary for tool items | 10.99 | 25.100.01 35.240.50 |
| ISO/NP TS 13399-4 Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items | 10.99 | 25.100.01 35.240.50 |
| ISO/TS 13399-4:2007 Cutting tool data representation and exchange -- Part 4: Reference dictionary for adaptive items | 90.92 | 25.100.01 35.240.50 |
| ISO/NP TS 13399-5 Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items | 10.99 | 25.100.01 35.240.50 |
| ISO/TS 13399-5:2007 Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items | 90.92 | 25.100.01 35.240.50 |
| ISO/NP TS 13399-50 Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts | 10.99 | 25.100.01 35.240.50 |
| ISO/TS 13399-50:2007 Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts | 90.92 | 25.100.01 35.240.50 |
| ISO/TS 13399-60:2007 Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems | 90.92 | 35.240.50 25.100.01 |
| ISO/NP TS 13399-60 Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems | 10.99 | 35.240.50 25.100.01 |
| ISO/TS 13399-100:2008 Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries | 60.60 | 35.240.50 25.100.01 |
| ISO/TS 13399-150:2008 Cutting tool data representation and exchange -- Part 150: Usage guidelines | 60.60 | 35.240.50 25.100.01 |
| ISO 15488:2003 Collets with 8 degree setting angle for tool shanks -- Collets, nuts and fitting dimensions | 90.60 | 25.060.20 |
| ISO 15601:2000 Hammers -- Technical specifications concerning steel hammer heads -- Test procedures | 90.93 | 25.140.30 |
| ISO 15641:2001 Milling cutters for high speed machining -- Safety requirements | 90.93 | 25.100.20 |
| ISO 26622-1:2008 Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks | 60.60 | 25.060.20 |
| ISO 26622-2:2008 Modular taper interface with ball track system -- Part 2: Dimensions and designation of receivers | 60.60 | 25.060.20 |
| ISO 26623-1:2008 Polygonal taper interface with flange contact surface -- Part 1: Dimensions and designation of shanks | 60.60 | 25.060.20 |
| ISO 26623-2:2008 Polygonal taper interface with flange contact surface -- Part 2: Dimensions and designation of receivers | 60.60 | 25.060.20 |
News feeds
