TC 22 - Road vehicles
Items to be displayed:
Standards and projects under the direct responsibility of TC 22 Secretariat and its SCs
| Standard and/or project | ICS | TC | |
|---|---|---|---|
| ISO 303:2002 Road vehicles -- Installation of lighting and light signalling devices for motor vehicles and their trailers | 90.92 | 43.040.20 | TC 22/SC 8 |
| ISO 303:2002/Cor 1:2003 | 60.60 | 43.040.20 | TC 22/SC 8 |
| ISO 337:1981 Road vehicles -- 50 semi-trailer fifth wheel coupling pin -- Basic and mounting/interchangeability dimensions | 90.92 | 43.040.70 | TC 22/SC 15 |
| ISO 337:1981/Cor 1:1990 | 60.60 | 43.040.70 | TC 22/SC 15 |
| ISO 611:2003 Road vehicles -- Braking of automotive vehicles and their trailers -- Vocabulary | 90.60 | 01.040.43 43.040.40 | TC 22/SC 2 |
| ISO 612:1978 Road vehicles -- Dimensions of motor vehicles and towed vehicles -- Terms and definitions | 90.92 | 01.040.43 43.020 | TC 22 |
| ISO 1102:2001 Commercial road vehicles -- 50 mm drawbar eye -- Interchangeability | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 1103:2007 Road vehicles -- Coupling balls for caravans and light trailers -- Dimensions | 60.60 | 43.040.70 | TC 22/SC 4 |
| ISO 1176:1990 Road vehicles -- Masses -- Vocabulary and codes | 90.20 | 01.040.43 43.020 | TC 22 |
| ISO 1185:2003 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO/TR 1417:1974 Automobiles -- Anchorages for seat belts | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 1585:1992 Road vehicles -- Engine test code -- Net power | 90.92 | 43.060.01 | TC 22/SC 5 |
| ISO 1724:2003 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 1726:2000 Road vehicles -- Mechanical coupling between tractors and semi-trailers -- Interchangeability | 90.93 | 43.040.70 | TC 22/SC 15 |
| ISO 1726:2000/Cor 1:2007 | 60.60 | 43.040.70 | TC 22/SC 15 |
| ISO 1726-2:2007 Road vehicles -- Mechanical couplings between tractors and semi-trailers -- Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers | 60.60 | 43.040.70 | TC 22/SC 15 |
| ISO 1728:2006 Road vehicles -- Pneumatic braking connections between motor vehicles and towed vehicles -- Interchangeability | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 1919:1998 Road vehicles -- M14 x 1,25 spark-plugs with flat seating and their cylinder head housings | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 1919:1998/Cor 1:1999 | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 2344:1998 Road vehicles -- M14 x 1,25 spark-plugs with conical seating and their cylinder head housings | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 2345:1994 Road vehicles -- M18 x 1,5 spark-plugs with conical seating and their cylinder head housing | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 2346:2001 Road vehicles -- M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 2347:1994 Road vehicles -- M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 2416:1992 Passenger cars -- Mass distribution | 90.60 | 43.100 | TC 22 |
| ISO 2534:1998 Road vehicles -- Engine test code -- Gross power | 90.60 | 43.060.01 | TC 22/SC 5 |
| ISO 2575:2004 Road vehicles -- Symbols for controls, indicators and tell-tales | 90.92 | 01.080.20 43.040.30 | TC 22/SC 13 |
| ISO 2575:2004/Amd 1:2005 | 60.60 | 01.080.20 43.040.30 | TC 22/SC 13 |
| ISO 2575:2004/Amd 2:2006 | 60.60 | 01.080.20 43.040.30 | TC 22/SC 13 |
| ISO 2575:2004/Amd 3:2008 | 60.60 | 01.080.20 43.040.30 | TC 22/SC 13 |
| ISO 2575:2004/Amd 4:2009 | 60.60 | 01.080.20 43.040.30 | TC 22/SC 13 |
| ISO 2697:1999 Diesel engines -- Fuel nozzles -- Size "S" | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 2698:1993 Diesel engines -- Clamp-mounted fuel injectors, types 7 and 28 | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 2699:1994 Diesel engines -- Flange-mounted fuel injectors, size "S" -- Types 2, 3, 4, 5 and 6 | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 2704:1998 Road vehicles -- M10 x 1 spark-plugs with flat seating and their cylinder head housings | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 2705:2006 Road vehicles -- M12 x 1,25 spark-plugs with flat seating and their cylinder head housings | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 2958:1973 Road vehicles -- Exterior protection for passenger cars | 90.60 | 43.040.80 | TC 22 |
| ISO 2974:2005 Diesel engines -- High-pressure fuel injection pipe end-connections with 60 degrees female cone | 90.92 | 43.060.40 | TC 22/SC 7 |
| ISO 3006:2005 Road vehicles -- Passenger car wheels for road use -- Test methods | 90.92 | 43.040.50 | TC 22/SC 19 |
| ISO 3208:1974 Road vehicles -- Evaluation of protrusions inside passenger cars | 90.60 | 43.040.80 43.040.60 | TC 22 |
| ISO 3267:1991 Road vehicles -- Headlamp cleaners | 90.92 | 43.040.20 | TC 22/SC 8 |
| ISO 3409:1975 Passenger cars -- Lateral spacing of foot controls | 90.93 | 43.040.30 | TC 22/SC 13 |
| ISO 3412:1992 Road vehicles -- Screened and waterproof spark-plugs and their connections -- Types 1A and 1B | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 3468:1989 Passenger cars -- Windscreen defrosting systems -- Test method | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 3469:1989 Passenger cars -- Windscreen washing systems -- Test methods | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 3469:1989/Amd 1:2006 | 60.60 | 43.040.65 | TC 22/SC 17 |
| ISO 3470:1989 Passenger cars -- Windscreen demisting systems -- Test method | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 3536:1999 Road vehicles -- Safety glazing materials -- Vocabulary | 90.93 | 43.040.65 81.040.30 01.040.81 01.040.43 | TC 22/SC 11 |
| ISO 3537:1999 Road vehicles -- Safety glazing materials -- Mechanical tests | 90.60 | 81.040.30 43.040.65 | TC 22/SC 11 |
| ISO 3538:1997 Road vehicles -- Safety glazing materials -- Test methods for optical properties | 90.60 | 43.040.65 81.040.30 | TC 22/SC 11 |
| ISO 3539:1975 Road vehicles -- Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11 | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 3553-1:1987 Road vehicles -- High-tension connections for ignition coils and distributors -- Part 1: Socket-type | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 3553-2:1997 Road vehicles -- High-tension connectors for ignition coils and distributors -- Part 2: Plug-types | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 3559:1976 Road vehicles -- Working voltages for lights fitted to motor vehicles and to their trailers | 90.93 | 43.040.20 | TC 22/SC 8 |
| ISO 3560:2001 Road vehicles -- Frontal fixed barrier or pole impact test procedure | 90.92 | 43.020 | TC 22/SC 10 |
| ISO 3583:1984 Road vehicles -- Pressure test connection for compressed-air pneumatic braking equipment | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 3584:2001 Road vehicles -- Drawbar couplings -- Interchangeability | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 3731:2003 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 3732:2003 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 3779:2009 Road vehicles -- Vehicle identification number (VIN) -- Content and structure | 60.60 | 43.020 | TC 22 |
| ISO 3780:2009 Road vehicles -- World manufacturer identifier (WMI) code | 60.60 | 43.020 | TC 22 |
| ISO 3784:1976 Road vehicles -- Measurement of impact velocity in collision tests | 90.60 | 43.020 | TC 22/SC 10 |
| ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry -- Determination of burning behaviour of interior materials | 90.60 | 43.020 65.060.01 13.220.40 | TC 22 |
| ISO 3803:1984 Road vehicles -- Hydraulic pressure test connection for braking equipment | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 3808:2002 Road vehicles -- Unscreened high-voltage ignition cables -- General specifications, test methods and requirements | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 3832:2002 Passenger cars -- Luggage compartments -- Method of measuring reference volume | 90.60 | 43.040.60 | TC 22 |
| ISO 3833:1977 Road vehicles -- Types -- Terms and definitions | 90.92 | 01.040.43 43.020 | TC 22 |
| ISO 3842:2006 Road vehicles -- Fifth wheels -- Interchangeability | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 3853:1994 Road vehicles -- Towing vehicle coupling device to tow caravans or light trailers -- Mechanical strength test | 90.93 | 43.040.70 | TC 22/SC 4 |
| ISO 3871:2000 Road vehicles -- Labelling of containers for petroleum-based or non-petroleum-based brake fluid | 90.93 | 43.040.40 75.120 | TC 22/SC 2 |
| ISO 3888-1:1999 Passenger cars -- Test track for a severe lane-change manoeuvre -- Part 1: Double lane-change | 90.60 | 43.180 43.100 | TC 22/SC 9 |
| ISO 3888-2:2002 Passenger cars -- Test track for a severe lane-change manoeuvre -- Part 2: Obstacle avoidance | 90.92 | 43.100 43.180 | TC 22/SC 9 |
| ISO 3894:2005 Road vehicles -- Wheels/rims for commercial vehicles -- Test methods | 90.92 | 43.040.50 | TC 22/SC 19 |
| ISO 3895:1986 Road vehicles -- Screened and waterproof spark-plug and its connection -- Type 2 | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 3896:1986 Road vehicles -- Screened and waterproof spark-plug and its connection -- Type 3 | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 3911:2004 Wheels and rims for pneumatic tyres -- Vocabulary, designation and marking | 90.60 | 01.040.43 43.040.50 | TC 22/SC 19 |
| ISO 3917:1999 Road vehicles -- Safety glazing materials -- Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering | 90.60 | 81.040.30 43.040.65 | TC 22/SC 11 |
| ISO 3929:2003 Road vehicles -- Measurement methods for exhaust gas emissions during inspection or maintenance | 90.60 | 13.040.50 43.060.20 | TC 22/SC 5 |
| ISO 3930:2000 Instruments for measuring vehicle exhaust emissions | 90.92 | 43.180 13.040.50 | TC 22/SC 5 |
| ISO 3930:2000/Amd 1:2004 | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 3958:1996 Passenger cars -- Driver hand-control reach | 90.93 | 43.040.30 | TC 22/SC 13 |
| ISO 3984:2004 Road vehicles -- Rear moving barrier impact test procedure | 90.93 | 43.100 | TC 22/SC 10 |
| ISO 3996:1995 Road vehicles -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid | 90.92 | 83.140.40 43.040.40 | TC 22/SC 2 |
| ISO 4008-1:1980 Road vehicles -- Fuel injection pump testing -- Part 1: Dynamic conditions | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 4008-2:1983 Road vehicles -- Fuel injection pump testing -- Part 2: Static conditions | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 4008-3:1987 Road vehicles -- Fuel injection pump testing -- Part 3: Application and test procedures | 90.92 | 43.060.40 | TC 22/SC 7 |
| ISO 4008-3:1987/Amd 1:2002 | 60.60 | 43.060.40 | TC 22/SC 7 |
| ISO 4009:2000 Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers | 90.93 | 43.040.10 | TC 22/SC 15 |
| ISO 4010:1998 Diesel engines -- Calibrating nozzle, delay pintle type | 90.60 | 43.180 | TC 22/SC 7 |
| ISO 4020:2001 Road vehicles -- Fuel filters for diesel engines -- Test methods | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 4024:1992 Road vehicles -- Ignition coils -- Low-tension cable connections | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 4030:1983 Road vehicles -- Vehicle identification number (VIN) -- Location and attachment | 90.60 | 43.020 | TC 22 |
| ISO 4038:1996 Road vehicles -- Hydraulic braking systems -- Simple flare pipes, tapped holes, male fittings and hose end fittings | 90.60 | 83.140.40 43.040.40 | TC 22/SC 2 |
| ISO 4039-1:1998 Road vehicles -- Pneumatic braking systems -- Part 1: Pipes, male fittings and tapped holes with facial sealing surface | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 4039-2:1998 Road vehicles -- Pneumatic braking systems -- Part 2: Pipes, male fittings and holes with conical sealing surface | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 4040:2009 Road vehicles -- Location of hand controls, indicators and tell-tales in motor vehicles | 60.60 | 43.040.30 | TC 22/SC 13 |
| ISO 4082:1981 Road vehicles -- Motor vehicles -- Flasher units | 90.60 | 43.040.20 | TC 22/SC 8 |
| ISO 4086:2001 Road vehicles -- 90 semi-trailer fifth wheel kingpin -- Interchangeability | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 4091:2003 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Definitions, tests and requirements | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 4093:1999 Diesel engines -- Fuel injection pumps -- High-pressure pipes for testing | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 4100:1980 Road vehicles -- World parts manufacturer identifier (WPMI) code | 90.20 | 43.020 | TC 22 |
| ISO 4106:2004 Motorcycles -- Engine test code -- Net power | 90.92 | 43.140 | TC 22/SC 22 |
| ISO 4107:1998 Commercial vehicles -- Wheel hub attachment dimensions | 90.92 | 43.040.50 | TC 22/SC 19 |
| ISO 4113:1988 Road vehicles -- Calibration fluid for diesel injection equipment | 90.92 | 43.180 | TC 22/SC 7 |
| ISO/TR 4114:1979 Road vehicles -- Caravans and light trailers -- Static load on ball couplings | 90.60 | 43.040.70 | TC 22/SC 4 |
| ISO 4129:1990 Mopeds -- Symbols for controls, indicators and tell-tales | 90.92 | 01.080.20 43.140 | TC 22/SC 23 |
| ISO 4130:1978 Road vehicles -- Three-dimensional reference system and fiducial marks -- Definitions | 90.60 | 01.040.43 43.020 | TC 22 |
| ISO 4131:1979 Road vehicles -- Dimensional codes for passenger cars | 90.92 | 43.100 | TC 22 |
| ISO 4138:2004 Passenger cars -- Steady-state circular driving behaviour -- Open-loop test methods | 90.92 | 43.100 | TC 22/SC 9 |
| ISO 4141-1:2005 Road vehicles -- Multi-core connecting cables -- Part 1: Test methods and requirements for basic performance sheathed cables | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 4141-2:2006 Road vehicles -- Multi-core connecting cables -- Part 2: Test methods and requirements for high performance sheathed cables | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 4141-3:2006 Road vehicles -- Multi-core connecting cables -- Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 4141-4:2009 Road vehicles -- Multi-core connecting cables -- Part 4: Test methods and requirements for coiled cable assemblies | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 4148:2004 Road vehicles -- Special warning lamps -- Dimensions | 90.93 | 43.040.20 | TC 22/SC 8 |
| ISO 4151:1987 Road vehicles -- Mopeds -- Type, location and functions of controls | 90.60 | 43.140 | TC 22/SC 23 |
| ISO 4164:1978 Road vehicles -- Mopeds -- Engine test code -- Net power | 90.93 | 43.140 | TC 22/SC 23 |
| ISO 4165:2001 Road vehicles -- Electrical connections -- Double-pole connection | 90.60 | 43.040.10 | TC 22/SC 3 |
| ISO 4182:1999 Motor vehicles -- Measurement of variations in dipped-beam headlamp angle as a function of load | 90.93 | 43.040.20 | TC 22/SC 8 |
| ISO 4513:2003 Road vehicles -- Visibility -- Method for establishment of eyellipses for driver's eye location | 90.92 | 43.020 | TC 22/SC 17 |
| ISO 4925:2005 Road vehicles -- Specification of non-petroleum-base brake fluids for hydraulic systems | 90.60 | 75.120 43.040.40 | TC 22/SC 2 |
| ISO 4926:2006 Road vehicles -- Hydraulic braking systems -- Non-petroleum-base reference fluids | 90.60 | 43.040.40 75.120 | TC 22/SC 2 |
| ISO 4927:2005 Road vehicles -- Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 4928:2006 Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 4929:1978 Road vehicles -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 4930:2006 Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 5011:2000 Inlet air cleaning equipment for internal combustion engines and compressors -- Performance testing | 90.93 | 43.060.20 | TC 22/SC 7 |
| ISO 5422:1982 Road vehicles -- Anchorages for towing ropes, cables or bars | 90.60 | 43.040.70 | TC 22 |
| ISO 5740:1982 Road vehicles -- Rear view mirrors -- Test method for determining reflectance | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 5897:1998 Passenger cars -- Rear-window demisting system -- Test method | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 5898:1997 Passenger cars -- Rear-window defrosting system -- Test method | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 6117:2005 Road vehicles -- Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.) | 90.60 | 83.140.50 43.040.40 | TC 22/SC 2 |
| ISO 6118:2006 Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 6119:2006 Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 6120:1995 Road vehicles -- Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid | 90.93 | 83.140.40 43.040.40 | TC 22/SC 2 |
| ISO 6255:1997 Passenger cars -- Rear-window washing and wiping systems -- Test methods | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 6310:2009 Road vehicles -- Brake linings -- Compressive strain test methods | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 6311:1980 Road vehicles -- Brake linings -- Internal shear strength of lining material -- Test procedure | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 6312:2001 Road vehicles -- Brake linings -- Shear test procedure for disc brake pad and drum brake shoe assemblies | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 6313:1980 Road vehicles -- Brake linings -- Effects of heat on dimensions and form of disc brake pads -- Test procedure | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 6314:1980 Road vehicles -- Brake linings -- Resistance to water, saline solution, oil and brake fluid -- Test procedure | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 6315:1980 Road vehicles -- Brake linings -- Seizure to ferrous mating surface due to corrosion -- Test procedure | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 6415:2005 Internal combustion engines -- Spin-on filters for lubricating oil -- Dimensions | 90.93 | 43.060.30 | TC 22/SC 7 |
| ISO 6460-1:2007 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements | 60.60 | 43.140 13.040.50 | TC 22/SC 22 |
| ISO 6460-2:2007 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 2: Test cycles and specific test conditions | 60.60 | 43.140 13.040.50 | TC 22/SC 22 |
| ISO 6460-3:2007 Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 3: Fuel consumption measurement at a constant speed | 60.60 | 43.140 13.040.50 | TC 22/SC 22 |
| ISO 6469-1:2009 Electrically propelled road vehicles -- Safety specifications -- Part 1: On-board rechargeable energy storage system (RESS) | 60.60 | 43.120 | TC 22/SC 21 |
| ISO 6469-2:2009 Electrically propelled road vehicles -- Safety specifications -- Part 2: Vehicle operational safety means and protection against failures | 60.60 | 43.120 | TC 22/SC 21 |
| ISO 6469-3:2001 Electric road vehicles -- Safety specifications -- Part 3: Protection of persons against electric hazards | 90.92 | 43.120 | TC 22/SC 21 |
| ISO 6469-3:2001/Cor 1:2003 | 60.60 | 43.120 | TC 22/SC 21 |
| ISO 6487:2002 Road vehicles -- Measurement techniques in impact tests -- Instrumentation | 90.92 | 43.020 | TC 22/SC 12 |
| ISO 6487:2002/Amd 1:2008 . | 60.60 | 43.020 | TC 22/SC 12 |
| ISO 6518-1:2002 Road vehicles -- Ignition systems -- Part 1: Vocabulary | 90.60 | 43.060.50 01.040.43 | TC 22/SC 1 |
| ISO 6518-2:1995 Road vehicles -- Ignition systems -- Part 2: Electrical performance and function test methods | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 6518-2:1995/Cor 1:1997 | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 6519:2004 Diesel engines -- Fuel injection pumps -- Tapers for shaft ends and hubs | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 6546:2006 Road vehicles -- Collection of accident data for evaluation of occupant restraint performance | 90.93 | 43.020 | TC 22/SC 12 |
| ISO 6549:1999 Road vehicles -- Procedure for H- and R-point determination | 90.60 | 43.020 | TC 22/SC 13 |
| ISO 6550-1:1994 Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 1: M14 x 1,25 glow-plugs | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 6550-2:1994 Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 2: M12 x 1,25 glow-plugs | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 6550-3:2009 Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 3: M10 glow-plugs | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 6550-4:2009 Road vehicles -- Sheath-type glow-plugs with conical seating and their cylinder head housing -- Part 4: M8 x 1 glow-plugs | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 6597:2005 Road vehicles -- Hydraulic braking systems, including those with electronic control functions, for motor vehicles -- Test procedures | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 6621-1:2007 Internal combustion engines -- Piston rings -- Part 1: Vocabulary | 60.60 | 01.040.43 43.060.10 | TC 22 |
| ISO 6621-2:2003 Internal combustion engines -- Piston rings -- Part 2: Inspection measuring principles | 90.93 | 43.060.10 | TC 22 |
| ISO 6621-3:2000 Internal combustion engines -- Piston rings -- Part 3: Material specifications | 90.60 | 43.060.10 | TC 22 |
| ISO 6621-4:2003 Internal combustion engines -- Piston rings -- Part 4: General specifications | 90.60 | 43.060.10 | TC 22 |
| ISO 6621-5:2005 Internal combustion engines -- Piston rings -- Part 5: Quality requirements | 90.92 | 43.060.10 | TC 22 |
| ISO 6622-1:2003 Internal combustion engines -- Piston rings -- Part 1: Rectangular rings made of cast iron | 90.93 | 27.020 | TC 22 |
| ISO 6622-2:2003 Internal combustion engines -- Piston rings -- Part 2: Rectangular rings made of steel | 90.92 | 43.060.10 | TC 22 |
| ISO 6623:2004 Internal combustion engines -- Piston rings -- Scraper rings made of cast iron | 90.60 | 43.060.10 | TC 22 |
| ISO 6624-1:2001 Internal combustion engines -- Piston rings -- Part 1: Keystone rings made of cast iron | 90.93 | 43.060.10 | TC 22 |
| ISO 6624-2:2003 Internal combustion engines -- Piston rings -- Part 2: Half keystone rings made of cast iron | 90.60 | 43.060.10 | TC 22 |
| ISO 6624-3:2001 Internal combustion engines -- Piston rings -- Part 3: Keystone rings made of steel | 90.93 | 43.060.10 | TC 22 |
| ISO 6624-4:2003 Internal combustion engines -- Piston rings -- Part 4: Half keystone rings made of steel | 90.60 | 43.060.10 | TC 22 |
| ISO 6625:1986 Internal combustion engines -- Piston rings -- Oil control rings | 90.60 | 43.060.10 | TC 22 |
| ISO 6626:1989 Internal combustion engines -- Piston rings -- Coil-spring-loaded oil control rings | 90.92 | 43.060.10 | TC 22 |
| ISO 6626-2:2003 Internal combustion engines -- Piston rings -- Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron | 90.92 | 43.060.10 | TC 22 |
| ISO 6626-3:2008 Internal combustion engines -- Piston rings -- Part 3: Coil-spring-loaded oil control rings made of steel | 60.60 | 43.060.10 | TC 22 |
| ISO 6627:2000 Internal combustion engines -- Piston rings -- Expander/segment oil-control rings | 90.92 | 43.060.10 | TC 22 |
| ISO 6722:2006 Road vehicles -- 60 V and 600 V single-core cables -- Dimensions, test methods and requirements | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 6725:1981 Road vehicles -- Dimensions of two-wheeled mopeds and motorcycles -- Terms and definitions | 90.60 | 01.040.43 43.140 | TC 22/SC 22 |
| ISO 6726:1988 Mopeds and motorcycles with two wheels -- Masses -- Vocabulary | 90.60 | 01.040.43 43.140 | TC 22/SC 22 |
| ISO 6727:1981 Road vehicles -- Motorcycles -- Symbols for controls, indicators and telltales | 90.92 | 01.080.20 43.140 | TC 22/SC 22 |
| ISO 6786:1980 Road vehicles -- Air braking systems -- Identification of connections on units | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 6797:1982 Road vehicles -- Motor vehicles -- Production conformity requirements for flasher units | 90.60 | 43.040.20 | TC 22/SC 8 |
| ISO 6813:1998 Road vehicles -- Collision classification -- Terminology | 90.60 | 01.040.43 43.020 | TC 22/SC 12 |
| ISO 6855:1983 Road vehicles -- Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine | 90.92 | 13.040.50 43.140 | TC 22/SC 23 |
| ISO 6856:2005 Road vehicles -- Unscreened high-voltage ignition cable assemblies -- Test methods and general requirements | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 6969:2004 Road vehicles -- Sound signalling devices -- Tests after mounting on vehicle | 90.93 | 43.040.20 | TC 22/SC 3 |
| ISO 6970:1994 Motorcycles and mopeds -- Pollution tests -- Chassis dynamometer bench | 90.60 | 13.040.50 43.140 | TC 22/SC 23 |
| ISO 7026:1997 Diesel engines -- Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 7030:1987 Road vehicles -- Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19 | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 7116:1995 Mopeds -- Measurement of maximum speed | 90.92 | 43.140 | TC 22/SC 23 |
| ISO 7117:1995 Motorcycles -- Measurement of maximum speed | 90.92 | 43.140 | TC 22/SC 22 |
| ISO 7141:2005 Road vehicles -- Light alloy wheels -- Impact test | 90.60 | 43.040.50 | TC 22/SC 19 |
| ISO 7227:1987 Road vehicles -- Lighting and light signalling devices -- Vocabulary | 90.92 | 01.040.43 43.040.20 | TC 22/SC 8 |
| ISO 7227:1987/Amd 1:2004 | 60.60 | 43.040.20 01.040.43 | TC 22/SC 8 |
| ISO 7237:1993 Caravans -- Masses and dimensions -- Vocabulary | 90.92 | 01.040.43 43.100 | TC 22/SC 4 |
| ISO 7237:1993/Amd 1:2001 | 60.60 | 01.040.43 43.100 | TC 22 |
| ISO 7299-1:2007 Diesel engines -- End-mounting flanges for pumps -- Part 1: Fuel injection pumps | 90.20 | 43.060.40 | TC 22/SC 7 |
| ISO 7299-2:2009 Diesel engines -- End-mounting flanges for pumps -- Part 2: High-pressure supply pumps for common rail fuel injection systems | 60.60 | 43.060.40 | TC 22/SC 7 |
| ISO 7308:1987 Road vehicles -- Petroleum-based brake-fluid for stored-energy hydraulic brakes | 90.93 | 75.120 43.040.40 | TC 22/SC 2 |
| ISO 7309:1985 Road vehicles -- Hydraulic braking systems -- ISO reference petroleum base fluid | 90.93 | 43.040.40 75.120 | TC 22/SC 2 |
| ISO 7310:1993 Diesel engines -- Heads for spin-on fuel filters with horizontal flange -- Mounting and connecting dimensions | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 7311:1993 Diesel engines -- Heads for fuel filters with vertical flange -- Mounting and connecting dimensions | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 7375-1:1986 Road vehicles -- Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles -- Part 1: Dimensions | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 7375-2:1998 Road vehicles -- Coiled tube assemblies for air brake connection between towing and towed vehicles -- Part 2: Performance requirements | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 7397-1:1993 Passenger cars -- Verification of driver's direct field of view -- Part 1: Vehicle positioning for static measurement | 90.60 | 43.100 | TC 22/SC 17 |
| ISO 7397-2:1993 Passenger cars -- Verification of driver's direct field of view -- Part 2: Test method | 90.60 | 43.100 | TC 22/SC 17 |
| ISO 7398:1990 Motorcycles -- Direct current flasher units | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 7399:1990 Motorcycles -- Alternating current flasher units | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 7400:1990 Mopeds -- Alternating current flasher units | 90.93 | 43.140 | TC 22/SC 23 |
| ISO 7401:2003 Road vehicles -- Lateral transient response test methods -- Open-loop test methods | 90.92 | 43.020 | TC 22/SC 9 |
| ISO 7440-1:1991 Road vehicles -- Fuel injection equipment testing -- Part 1: Calibrating nozzle and holder assemblies | 90.92 | 43.060.40 43.180 | TC 22/SC 7 |
| ISO 7440-2:1991 Road vehicles -- Fuel injection equipment testing -- Part 2: Orifice plate flow-measurement | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 7575:1993 Commercial road vehicles -- Flat attachment wheel fixing nuts | 90.60 | 43.040.50 | TC 22/SC 19 |
| ISO 7576:1990 Road vehicles -- Two-stage fuel filters for compression-ignition engines -- Mounting and connecting dimensions | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 7578:2008 Road vehicles -- Sheath-type glow-plugs -- General requirements and test methods | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 7588-1:1998 Road vehicles -- Electrical/electronic switching devices -- Part 1: Relays and flashers | 90.93 | 43.040.20 43.040.10 | TC 22/SC 3 |
| ISO 7588-2:1998 Road vehicles -- Electrical/electronic switching devices -- Part 2: Electronic devices | 90.93 | 43.040.10 43.040.20 | TC 22/SC 3 |
| ISO 7588-3:1998 Road vehicles -- Electrical/electronic switching devices -- Part 3: Microrelays | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 7591:1982 Road vehicles -- Retro-reflective registration plates for motor vehicles and trailers -- Specification | 90.60 | 43.040.20 | TC 22/SC 8 |
| ISO 7612:2009 Diesel engines -- Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems -- Mounting dimensions | 60.60 | 43.060.40 | TC 22/SC 7 |
| ISO 7628-1:1998 Road vehicles -- Thermoplastics tubing for air braking systems -- Part 1: Dimensions and marking | 90.92 | 83.140.30 43.040.40 | TC 22/SC 2 |
| ISO 7628-2:1998 Road vehicles -- Thermoplastics tubing for air braking systems -- Part 2: Mounting on vehicle and test methods | 90.92 | 43.040.40 83.140.30 | TC 22/SC 2 |
| ISO 7628-2:1998/Cor 1:1999 | 60.60 | 83.140.30 43.040.40 | TC 22/SC 2 |
| ISO 7629:1987 Road vehicles -- Brake linings -- Disc brake pads -- Evaluation of surface and material flaws after testing | 90.92 | 43.040.40 | TC 22/SC 2 |
| ISO 7630:1985 Road vehicles -- Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) | 90.93 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 7631:1985 Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 7632:1985 Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 7633:1985 Road vehicles -- Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) | 90.60 | 43.040.40 83.140.50 | TC 22/SC 2 |
| ISO 7634:2007 Road vehicles -- Compressed air braking systems for towed vehicles including those with electronic braking control functions -- Test procedures | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 7635:2006 Road vehicles -- Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions -- Test procedures | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 7637-1:2002 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 1: Definitions and general considerations | 90.60 | 43.040.10 01.040.43 | TC 22/SC 3 |
| ISO 7637-1:2002/Amd 1:2008 | 60.60 | 43.040.10 01.040.43 | TC 22/SC 3 |
| ISO 7637-2:2004 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 2: Electrical transient conduction along supply lines only | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 7637-2:2004/Amd 1:2008 | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 7637-3:2007 Road vehicles -- Electrical disturbances from conduction and coupling -- Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines | 90.20 | 43.040.10 | TC 22/SC 3 |
| ISO 7638-1:2003 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage | 90.93 | 43.040.40 43.040.10 | TC 22/SC 3 |
| ISO 7638-2:2003 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage | 90.93 | 43.040.40 43.040.10 | TC 22/SC 3 |
| ISO 7639:1985 Road vehicles -- Diagnostic systems -- Graphical symbols | 90.20 | 43.180 01.080.20 | TC 22/SC 3 |
| ISO 7641-1:1983 Road vehicles -- Caravans and light trailers -- Calculation of the mechanical strength of the drawbar -- Part 1: Steel drawbars | 90.92 | 43.040.70 | TC 22/SC 4 |
| ISO 7642:1991 Caravans and light trailers -- Trailers of categories 01 and 02 with overrun brakes -- Inertia bench test methods for brakes | 90.92 | 43.040.40 | TC 22/SC 4 |
| ISO 7643:1991 Caravans and light trailers -- Trailers of categories 01 and 02 with overrun brakes -- Linear bench test methods for brake controls | 90.92 | 43.040.40 | TC 22/SC 4 |
| ISO 7646:1986 Commercial vehicles and buses -- Gearbox flanges -- Type A | 90.92 | 43.040.50 | TC 22/SC 15 |
| ISO 7647:1986 Commercial vehicles and buses -- Gearbox flanges -- Type S | 90.60 | 43.040.50 | TC 22/SC 15 |
| ISO 7648:1987 Flywheel housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances | 90.60 | 43.060.10 | TC 22/SC 15 |
| ISO 7649:1991 Clutch housings for reciprocating internal combustion engines -- Nominal dimensions and tolerances | 90.60 | 43.040.50 | TC 22/SC 15 |
| ISO 7650:1987 Commercial vehicles and buses -- Mounting dimensions for starter motors of types 1, 2, 3 and 4 | 90.92 | 43.060.50 | TC 22/SC 15 |
| ISO 7650:1987/Amd 1:2001 | 60.60 | 43.060.50 | TC 22/SC 15 |
| ISO 7651:1991 Commercial vehicles and buses -- Mounting dimensions for alternators of types 1, 2 and 3 | 90.60 | 43.060.50 | TC 22/SC 15 |
| ISO 7652:1983/Amd 1:1992 | 60.60 | 43.060.20 | TC 22/SC 15 |
| ISO 7653:1985 Road vehicles -- Commercial vehicles -- Couplings between power take-offs (PTO) and ancillary driven units | 90.92 | 43.040.50 | TC 22/SC 15 |
| ISO 7654:1998 Road vehicles -- Spin-on fuel filters for diesel engines -- Mounting and connecting dimensions | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 7656:1993 Commercial road vehicles -- Dimensional codes | 90.60 | 43.080.01 | TC 22 |
| ISO 7707:1986 Commercial road vehicles -- Connections for rear-mounted power take-offs (PTO) | 90.60 | 43.040.50 | TC 22/SC 15 |
| ISO 7736:1984 Road vehicles -- Car radio for front installation -- Installation space including connections | 90.60 | 43.040.15 | TC 22 |
| ISO 7747:1983 Road vehicles -- Filter elements for full flow oil filters -- Dimensions | 90.93 | 43.060.30 | TC 22/SC 7 |
| ISO 7750-1:1992 Commercial vehicles -- Dimensions of air filter elements -- Part 1: Types A and B | 95.60 | 43.060.20 | TC 22/SC 7 |
| ISO 7750-2:1984 Road vehicles -- Air filter elements for commercial vehicles -- Dimensions -- Part 2: Types C and D | 90.20 | 43.060.20 | TC 22/SC 7 |
| ISO 7803:1987 Commercial road vehicles -- Steering ball joints | 90.60 | 43.040.50 | TC 22/SC 15 |
| ISO 7804:1985 Commercial road vehicles -- Side openings for truck power take-offs | 90.60 | 43.040.50 | TC 22/SC 15 |
| ISO 7859:2000 Mopeds -- Fuel consumption measurements | 90.93 | 43.140 | TC 22/SC 23 |
| ISO/TR 7861:2003 Road vehicles -- Injury risk curves for evaluation of occupant protection in frontal impact | 60.60 | 43.020 | TC 22/SC 12 |
| ISO 7862:2004 Road vehicles -- Sled test procedure for the evaluation of restraint systems by simulation of frontal collisions | 90.93 | 43.040.80 | TC 22/SC 10 |
| ISO 7876-1:1990 Fuel injection equipment -- Vocabulary -- Part 1: Fuel injection pumps | 90.60 | 01.040.43 43.060.40 | TC 22/SC 7 |
| ISO 7876-1:1990/Amd 1:1999 | 60.60 | 01.040.43 43.060.40 | TC 22/SC 7 |
| ISO 7876-2:1991 Fuel injection equipment -- Vocabulary -- Part 2: Fuel injectors | 90.60 | 01.040.43 43.060.40 | TC 22/SC 7 |
| ISO 7876-2:1991/Amd 1:1999 | 60.60 | 01.040.43 43.060.40 | TC 22/SC 7 |
| ISO 7876-3:1993 Fuel injection equipment -- Vocabulary -- Part 3: Unit injectors | 90.60 | 01.040.43 43.060.40 | TC 22/SC 7 |
| ISO 7876-4:2004 Fuel injection equipment -- Vocabulary -- Part 4: High-pressure pipes and end-connections | 90.60 | 43.060.40 01.040.43 | TC 22/SC 7 |
| ISO 7876-5:2004 Fuel injection equipment -- Vocabulary -- Part 5: Common rail fuel injection system | 90.60 | 01.040.43 43.060.40 | TC 22/SC 7 |
| ISO 7879:1997 Diesel engines -- Cradle-mounted in-line fuel injection pumps -- Mounting dimensions | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO/TR 7882:1986 Road vehicles -- Brake linings -- Determination of thermal conductivity by guarded hot-plate apparatus | 90.93 | 43.040.40 | TC 22/SC 2 |
| ISO 7975:2006 Passenger cars -- Braking in a turn -- Open-loop test method | 90.60 | 43.100 | TC 22/SC 9 |
| ISO 8035:1991 Commercial road vehicles and buses over 3,5 t -- Front towing attachments | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 8052:1990 Mopeds -- Direct current flasher units | 90.93 | 43.140 | TC 22/SC 23 |
| ISO 8092-1:1996 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 1: Tabs for single-pole connections -- Dimensions and specific requirements | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 8092-2:2005 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions, test methods and general performance requirements | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 8092-3:1996 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 3: Tabs for multi-pole connections -- Dimensions and specific requirements | 90.60 | 43.040.10 | TC 22/SC 3 |
| ISO 8092-4:1997 Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 4: Pins for single- and multi-pole connections -- Dimensions and specific requirements | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 8093:1985 Road vehicles -- Diagnostic testing of electronic systems | 90.60 | 43.180 | TC 22/SC 3 |
| ISO 8123:1991 Road vehicles -- Diametral pitch starter motor pinions | 90.60 | 43.060.50 | TC 22/SC 15 |
| ISO 8218:1989 Road vehicles -- Levelling devices for headlamp dipped beam | 90.93 | 43.040.20 | TC 22/SC 8 |
| ISO 8349:2002 Road vehicles -- Measurement of road surface friction | 90.92 | 43.020 | TC 22/SC 9 |
| ISO 8356:1984 Road vehicles -- Diesel engines -- Screw-in injector, type 22 | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO/TR 8357:1996 Road vehicles -- Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes | 60.60 | 43.020 | TC 22 |
| ISO 8470:2006 Road vehicles -- M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 8535-1:2006 Diesel engines -- Steel tubes for high-pressure fuel injection pipes -- Part 1: Requirements for seamless cold-drawn single-wall tubes | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 8535-2:2003 Compression-ignition engines -- Steel tubes for high-pressure fuel injection pipes -- Part 2: Requirements for composite tubes | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 8644:2006 Motorcycles -- Light-alloy wheels -- Test method | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 8645:1988 Mopeds -- Light-alloy wheels -- Test method | 90.93 | 43.140 | TC 22/SC 23 |
| ISO 8667:1992 Commercial vehicles and buses -- Cross-tooth gearbox flanges, type T | 90.60 | 43.040.50 | TC 22/SC 15 |
| ISO 8705:2005 Mopeds -- Measurement method for location of centre of gravity | 90.60 | 43.140 | TC 22/SC 23 |
| ISO 8706:1990 Two-wheeled mopeds -- Parking stability of side- and centre-stands | 90.93 | 43.140 | TC 22/SC 23 |
| ISO 8709:1995 Mopeds -- Brakes and braking devices -- Tests and measurement methods | 90.92 | 43.140 | TC 22/SC 23 |
| ISO 8709:1995/Cor 1:1998 | 60.60 | 43.140 | TC 22/SC 23 |
| ISO 8710:1995 Motorcycles -- Brakes and braking devices -- Tests and measurement methods | 90.92 | 43.140 | TC 22/SC 22 |
| ISO 8713:2005 Electric road vehicles -- Vocabulary | 90.60 | 43.120 01.040.43 | TC 22/SC 21 |
| ISO 8714:2002 Electric road vehicles -- Reference energy consumption and range -- Test procedures for passenger cars and light commercial vehicles | 90.60 | 43.120 | TC 22/SC 21 |
| ISO 8715:2001 Electric road vehicles -- Road operating characteristics | 90.93 | 43.120 | TC 22/SC 21 |
| ISO 8716:2001 Road vehicles -- Fifth wheel kingpins -- Strength test | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 8717:2000 Commercial road vehicles -- Fifth wheel couplings -- Strength tests | 90.93 | 43.040.70 | TC 22/SC 15 |
| ISO 8718:2001 Road vehicles -- Drawbar couplings and eyes for hinged drawbars -- Strength tests | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 8720:1991 Passenger cars -- Specifications for mechanical jacks | 90.60 | 43.180 | TC 22 |
| ISO 8721:1987 Road vehicles -- Measurement techniques in impact tests -- Optical instrumentation | 90.92 | 43.020 | TC 22/SC 12 |
| ISO/TR 8725:1988 Road vehicles -- Transient open-loop response test method with one period of sinusoidal input | 60.60 | 43.020 | TC 22/SC 9 |
| ISO/TR 8726:1988 Road vehicles -- Transient open-loop response test method with pseudo-random steering input | 60.60 | 43.020 | TC 22/SC 9 |
| ISO 8755:2001 Commercial road vehicles -- 40 mm drawbar eye -- Interchangeability | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 8820-1:2008 Road vehicles -- Fuse-links -- Part 1: Definitions and general test requirements | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 8820-2:2005 Road vehicles -- Fuse-links -- Part 2: User's guide | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 8820-3:2002 Road vehicles -- Fuse-links -- Part 3: Fuse-links with tabs (blade type) | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 8820-4:2002 Road vehicles -- Fuse-links -- Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 8820-5:2007 Road vehicles -- Fuse-links -- Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures | 90.20 | 43.040.10 | TC 22/SC 3 |
| ISO 8820-6:2007 Road vehicles -- Fuse-links -- Part 6: Single-bolt fuse-links | 90.20 | 43.040.10 | TC 22/SC 3 |
| ISO 8820-7:2007 Road vehicles -- Fuse-links -- Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V | 90.20 | 43.040.10 | TC 22/SC 3 |
| ISO 8853:1989 Safety harnesses for competition drivers -- Requirements and test methods | 90.92 | 43.040.80 97.220.99 | TC 22/SC 12 |
| ISO 8854:1988 Road vehicles -- Alternators with regulators -- Test methods and general requirements | 90.92 | 43.060.50 | TC 22/SC 3 |
| ISO 8855:1991 Road vehicles -- Vehicle dynamics and road-holding ability -- Vocabulary | 90.92 | 01.040.43 43.020 | TC 22/SC 9 |
| ISO 8855:1991/Add 1:1992 Russian language version | 60.60 | 01.040.43 43.020 | TC 22/SC 9 |
| ISO 8984-1:1993 Diesel engines -- Testing of fuel injectors -- Part 1: Hand-lever-operated testing and setting apparatus | 90.60 | 43.180 | TC 22/SC 7 |
| ISO 8984-2:1993 Diesel engines -- Testing of fuel injectors -- Part 2: Test methods | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 9021:1988 Motorcycles -- Controls -- Types, positions and functions | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 9043:2008 Mopeds -- Measurement method for moments of inertia | 60.60 | 43.140 | TC 22/SC 23 |
| ISO 9102:1997 Diesel engines -- Screw-in injection nozzle holders, types 24, 25, 26 and 26.1 | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 9103:1987 Road vehicles -- Compression-ignition engines -- Screw-in injection nozzle holder, type 23 | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 9128:2006 Road vehicles -- Graphical symbols to designate brake fluid types | 90.60 | 43.040.40 75.120 01.080.20 | TC 22/SC 2 |
| ISO 9129:2008 Motorcycles -- Measurement methods for moments of inertia | 60.60 | 43.140 | TC 22/SC 22 |
| ISO 9130:2005 Motorcycles -- Measurement method for location of centre of gravity | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 9131:1993 Three-wheeled mopeds and motorcycles -- Dimensions -- Vocabulary | 90.60 | 43.140 | TC 22/SC 23 |
| ISO 9132:1990 Three-wheeled mopeds and motorcycles -- Masses -- Vocabulary | 90.93 | 43.140 | TC 22/SC 23 |
| ISO 9141:1989 Road vehicles -- Diagnostic systems -- Requirements for interchange of digital information | 90.20 | 43.180 | TC 22/SC 3 |
| ISO 9141-2:1994 Road vehicles -- Diagnostic systems -- Part 2: CARB requirements for interchange of digital information | 90.20 | 43.180 | TC 22/SC 3 |
| ISO 9141-2:1994/Amd 1:1996 | 60.60 | 43.180 | TC 22/SC 3 |
| ISO 9141-3:1998 Road vehicles -- Diagnostic systems -- Part 3: Verification of the communication between vehicle and OBD II scan tool | 90.20 | 43.180 | TC 22/SC 3 |
| ISO 9158:1988 Road vehicles -- Nozzle spouts for unleaded gasoline | 90.60 | 75.200 | TC 22 |
| ISO 9159:1988 Road vehicles -- Nozzle spouts for leaded gasoline and diesel fuel | 90.60 | 75.200 | TC 22 |
| ISO 9258:1989 Passenger cars -- Wiper systems -- Wiper blade length | 90.93 | 43.040.65 | TC 22/SC 17 |
| ISO 9259:1991 Passenger cars -- Windscreen wiper systems -- Wiper arm-to-blade connections | 90.93 | 43.040.65 | TC 22/SC 17 |
| ISO 9259:1991/Amd 1:2001 | 60.60 | 43.040.65 | TC 22/SC 3 |
| ISO/TR 9310:1987 Road vehicles -- Smoke measurement of compression-ignition (diesel) engines -- Survey of short in-service tests | 60.60 | 13.040.50 43.060.20 | TC 22/SC 5 |
| ISO 9367-1:1989 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 1: Commercial vehicles and combinations of vehicles, semi-trailers excluded | 90.60 | 43.040.70 | TC 22 |
| ISO 9367-2:1994 Lashing and securing arrangements on road vehicles for sea transportation on Ro/Ro ships -- General requirements -- Part 2: Semi-trailers | 90.60 | 43.040.70 | TC 22 |
| ISO 9457-1:1991 Road vehicles -- Metric starter motor pinions -- Part 1: Currently used pinions | 90.60 | 43.060.50 | TC 22/SC 15 |
| ISO 9457-2:1994 Road vehicles -- Metric starter motor pinions -- Part 2: Pinions with 20 degree pressure angle | 90.60 | 43.060.50 | TC 22/SC 15 |
| ISO 9458:1988 Passenger cars -- Starter motor electrical connections | 90.20 | 43.060.50 | TC 22/SC 3 |
| ISO/TR 9511:1991 Road vehicles -- Driver hand-control reach -- In-vehicle checking procedure | 60.60 | 43.040.30 | TC 22/SC 13 |
| ISO 9534:1989 Road vehicles -- Fuel pump electric connections | 90.20 | 43.060.40 43.060.50 | TC 22/SC 3 |
| ISO 9565:1990 Two-wheeled motorcycles -- Parking stability of side- and centre-stands | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 9619:1992 Passenger cars -- Windscreen wiping systems -- Test method | 90.60 | 43.040.65 | TC 22/SC 17 |
| ISO 9619:1992/Amd 1:2002 | 60.60 | 43.040.65 | TC 22/SC 17 |
| ISO 9704:1990 Passenger cars -- Wiper systems -- Shaft ends and arm-holes | 90.93 | 43.040.65 | TC 22/SC 17 |
| ISO/TR 9790:1999 Road vehicles -- Anthropomorphic side impact dummy -- Lateral impact response requirements to assess the biofidelity of the dummy | 60.60 | 43.180 | TC 22/SC 12 |
| ISO 9815:2003 Road vehicles -- Passenger-car and trailer combinations -- Lateral stability test | 90.92 | 43.100 | TC 22/SC 9 |
| ISO 9816:2006 Passenger cars -- Power-off reaction of a vehicle in a turn -- Open-loop test method | 90.60 | 43.100 | TC 22/SC 9 |
| ISO 9817:1991 Passenger cars -- Engine cooling systems -- Dimensions of pressure caps and their ramp seats on filler necks | 90.93 | 43.060.30 | TC 22 |
| ISO 9818:1991 Passenger cars -- Engine cooling systems -- Test methods and marking of pressure caps | 90.93 | 43.060.30 | TC 22 |
| ISO/TR 9819:1991 Road vehicles -- Comparison tables of regulations on photometric requirements of light signalling devices | 60.60 | 43.040.20 | TC 22/SC 8 |
| ISO 9987:1990 Motorcycles -- Measurement of variation of dipped beam inclination as a function of load | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 10054:1998 Internal combustion compression-ignition engines -- Measurement apparatus for smoke from engines operating under steady-state conditions -- Filter-type smokemeter | 90.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO/TR 10305-1:2003 Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz | 60.60 | 43.180 | TC 22/SC 3 |
| ISO/TR 10305-2:2003 Road vehicles -- Calibration of electromagnetic field strength measuring devices -- Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz | 60.60 | 43.180 | TC 22/SC 3 |
| ISO 10355:2004 Mopeds -- Positioning of lighting and light-signalling devices | 90.93 | 43.140 | TC 22/SC 23 |
| ISO 10392:1992 Road vehicles with two axles -- Determination of centre of gravity | 90.92 | 43.020 | TC 22/SC 9 |
| ISO 10455:1992 Road vehicles -- Dry ignition coils using rotating high-voltage distributor | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 10483-1:2004 Road vehicles -- Intelligent power switches -- Part 1: High-side intelligent power switch | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 10483-2:1996 Road vehicles -- Intelligent power switches -- Part 2: Low-side intelligent power switch | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 10486:1992 Passenger cars -- Car radio identification number (CRIN) | 90.60 | 43.040.15 | TC 22 |
| ISO 10487-1:1992 Passenger car radio connections -- Part 1: Dimensions and general requirements | 90.60 | 43.040.15 | TC 22 |
| ISO 10487-2:1995 Passenger cars -- Connections for car radios -- Part 2: Performance requirements | 90.60 | 43.040.15 | TC 22 |
| ISO 10521-1:2006 Road vehicles -- Road load -- Part 1: Determination under reference atmospheric conditions | 90.60 | 43.020 | TC 22/SC 5 |
| ISO 10521-2:2006 Road vehicles -- Road load -- Part 2: Reproduction on chassis dynamometer | 90.60 | 43.020 | TC 22/SC 5 |
| ISO 10597:2004 Road vehicles -- Flat attachment fixing nuts for commercial vehicles -- Test methods | 90.60 | 43.040.50 | TC 22/SC 19 |
| ISO 10599-1:1992 Car radios -- Coaxial aerial connectors -- Part 1: Dimensions | 90.60 | 43.040.15 | TC 22 |
| ISO 10599-2:1997 Car radios -- Coaxial aerial connectors -- Part 2: Characteristic values, performance requirements and tests | 90.60 | 43.040.15 | TC 22 |
| ISO 10599-2:1997/Cor 1:2005 | 60.60 | 43.040.15 | TC 22 |
| ISO/TR 10603:1992 Road vehicles -- Legal situation concerning lighting and light-signalling devices | 90.92 | 43.040.20 | TC 22/SC 8 |
| ISO 10604:1993 Road vehicles -- Measurement equipment for orientation of headlamp luminous beams | 90.93 | 43.180 | TC 22/SC 8 |
| ISO 10605:2008 Road vehicles -- Test methods for electrical disturbances from electrostatic discharge | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO/TR 10982:1998 Road vehicles -- Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags | 90.92 | 43.100 | TC 22/SC 10 |
| ISO 10997:1996 Passenger vehicles -- Side impact with deformable moving barrier -- Full scale test | 90.60 | 43.100 | TC 22/SC 10 |
| ISO 11012:2009 Heavy commercial vehicles and buses -- Open-loop test methods for the quantification of on-centre handling -- Weave test and transition test | 60.60 | 43.080.01 | TC 22/SC 9 |
| ISO 11055:1996 Flywheels for reciprocating internal combustion engines -- Installation dimensions for clutches | 90.60 | 43.060.10 | TC 22/SC 15 |
| ISO 11096:2002 Road vehicles -- Pedestrian protection -- Impact test method for pedestrian thigh, leg and knee | 90.60 | 43.020 | TC 22/SC 10 |
| ISO/PAS 11154:2006 Road vehicles -- Roof load carriers | 90.60 | 43.040.60 | TC 22/SC 4 |
| ISO/TS 11155-1:2001 Road vehicles -- Air filters for passenger compartments -- Part 1: Test for particulate filtration | 60.60 | 43.040.60 | TC 22/SC 7 |
| ISO 11155-2:2009 Road vehicles -- Air filters for passenger compartments -- Part 2: Test for gaseous filtration | 60.60 | 43.040.60 | TC 22/SC 7 |
| ISO 11157:2005 Road vehicles -- Brake lining assemblies -- Inertia dynamometer test method | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 11406:2001 Commercial road vehicles -- Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers -- Interchangeability | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 11406:2001/Cor 1:2005 | 60.60 | 43.040.70 | TC 22/SC 15 |
| ISO 11407:2004 Commercial road vehicles -- Mechanical coupling between towing vehicles, with coupling mounted forward and below, and centre-axle trailers -- Interchangeability | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 11446:2004 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 13-pole connectors for vehicles with 12 V nominal supply voltage | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 11451-1:2005 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology | 90.93 | 43.040.10 33.100.20 | TC 22/SC 3 |
| ISO 11451-1:2005/Amd 1:2008 | 60.60 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11451-2:2005 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Off-vehicle radiation sources | 90.93 | 43.040.10 33.100.20 | TC 22/SC 3 |
| ISO 11451-3:1994 Road vehicles -- Electrical disturbances by narrowband radiated electromagnetic energy -- Vehicle test methods -- Part 3: On-board transmitter simulation | 90.92 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11451-3:2007 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: On-board transmitter simulation | 90.20 | 43.040.10 33.100.20 | TC 22/SC 3 |
| ISO 11451-4:2006 Road vehicles -- Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI) | 90.60 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11452-1:2005 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 1: General principles and terminology | 90.93 | 43.040.10 33.100.20 | TC 22/SC 3 |
| ISO 11452-1:2005/Amd 1:2008 | 60.60 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11452-2:2004 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 2: Absorber-lined shielded enclosure | 90.60 | 43.040.10 33.100.20 | TC 22/SC 3 |
| ISO 11452-3:2001 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 3: Transverse electromagnetic mode (TEM) cell | 90.60 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11452-4:2005 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 4: Bulk current injection (BCI) | 90.92 | 43.040.10 33.100.20 | TC 22/SC 3 |
| ISO 11452-4:2005/Cor 1:2009 | 60.60 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11452-5:2002 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 5: Stripline | 90.93 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11452-7:2003 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 7: Direct radio frequency (RF) power injection | 90.93 | 43.040.10 33.100.20 | TC 22/SC 3 |
| ISO 11452-8:2007 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 8: Immunity to magnetic fields | 90.20 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11452-10:2009 Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Immunity to conducted disturbances in the extended audio frequency range | 60.60 | 33.100.20 43.040.10 | TC 22/SC 3 |
| ISO 11460:2007 Two-wheeled motorcycles -- Positioning of lighting and light-signalling devices | 60.60 | 43.140 | TC 22/SC 22 |
| ISO 11486:2006 Motorcycles -- Methods for setting running resistance on a chassis dynamometer | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 11519-1:1994 Road vehicles -- Low-speed serial data communication -- Part 1: General and definitions | 90.20 | 43.040.15 | TC 22/SC 3 |
| ISO 11519-3:1994 Road vehicles -- Low-speed serial data communication -- Part 3: Vehicle area network (VAN) | 90.20 | 43.040.15 | TC 22/SC 3 |
| ISO 11519-3:1994/Amd 1:1995 | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 11530:1993 Road vehicles -- Hydraulic jacks -- Specifications | 90.60 | 43.180 | TC 22 |
| ISO 11555-1:2003 Road vehicles -- Stabilizing devices for caravans and light trailers -- Part 1: Integrated stabilizers | 90.60 | 43.100 | TC 22/SC 4 |
| ISO 11565:2006 Road vehicles -- Spark-plugs -- Test methods and requirements | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 11565:2006/Cor 1:2007 | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 11614:1999 Reciprocating internal combustion compression-ignition engines -- Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas | 90.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 11748-1:2001 Road vehicles -- Technical documentation of electrical and electronic systems -- Part 1: Content of exchanged documents | 90.60 | 43.060.50 | TC 22/SC 3 |
| ISO 11748-2:2001 Road vehicles -- Technical documentation of electrical and electronic systems -- Part 2: Documentation agreement | 90.60 | 43.060.50 | TC 22/SC 3 |
| ISO 11748-3:2002 Road vehicles -- Technical documentation of electrical and electronic systems -- Part 3: Application example | 90.93 | 43.060.50 | TC 22/SC 3 |
| ISO 11838:1997 Motorcycle and motorcycle-rider kinematics -- Vocabulary | 90.60 | 01.040.43 43.140 | TC 22/SC 22 |
| ISO 11841-1:2000 Road vehicles and internal combustion engines -- Filter vocabulary -- Part 1: Definitions of filters and filter components | 90.93 | 01.040.43 43.060.30 43.060.40 43.060.20 | TC 22/SC 7 |
| ISO 11841-2:2000 Road vehicles and internal combustion engines -- Filter vocabulary -- Part 2: Definitions of characteristics of filters and their components | 90.93 | 01.040.43 43.060.30 43.060.40 43.060.20 | TC 22/SC 7 |
| ISO/TR 11842:1997 Road vehicles -- Comparison of statutory photometric requirements in various countries for lighting devices | 60.60 | 43.040.20 | TC 22/SC 8 |
| ISO 11898-1:2003 Road vehicles -- Controller area network (CAN) -- Part 1: Data link layer and physical signalling | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 11898-1:2003/Cor 1:2006 | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 11898-2:2003 Road vehicles -- Controller area network (CAN) -- Part 2: High-speed medium access unit | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 11898-3:2006 Road vehicles -- Controller area network (CAN) -- Part 3: Low-speed, fault-tolerant, medium-dependent interface | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 11898-3:2006/Cor 1:2006 | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 11898-4:2004 Road vehicles -- Controller area network (CAN) -- Part 4: Time-triggered communication | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 11898-5:2007 Road vehicles -- Controller area network (CAN) -- Part 5: High-speed medium access unit with low-power mode | 90.20 | 43.040.15 | TC 22/SC 3 |
| ISO/TR 11954:2008 Fuel cell road vehicles -- Maximum speed measurement | 60.60 | 43.120 | TC 22/SC 21 |
| ISO/TR 11955:2008 Hybrid-electric road vehicles -- Guidelines for charge balance measurement | 60.60 | 43.120 | TC 22/SC 21 |
| ISO 11992-1:2003 Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 1: Physical and data-link layers | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 11992-2:2003 Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 2: Application layer for brakes and running gear | 90.92 | 43.040.15 | TC 22/SC 3 |
| ISO 11992-2:2003/Amd 1:2007 | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 11992-3:2003 Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 3: Application layer for equipment other than brakes and running gear | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 11992-3:2003/Amd 1:2008 | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 11992-4:2005 Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 4: Diagnostics | 90.92 | 43.040.15 | TC 22/SC 3 |
| ISO 11992-4:2005/Cor 1:2006 | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 12021-1:1996 Road vehicles -- Sensitivity to lateral wind -- Part 1: Open-loop test method using wind generator input | 90.92 | 43.020 | TC 22/SC 9 |
| ISO 12097-1:2002 Road vehicles -- Airbag components -- Part 1: Vocabulary | 90.60 | 43.040.80 | TC 22/SC 12 |
| ISO 12097-2:1996 Road vehicles -- Airbag components -- Part 2: Testing of airbag modules | 90.93 | 43.040.80 | TC 22/SC 12 |
| ISO 12097-3:2002 Road vehicles -- Airbag components -- Part 3: Testing of inflator assemblies | 90.60 | 43.040.80 | TC 22/SC 12 |
| ISO 12098:2004 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- 15-pole connector for vehicles with 24 V nominal supply voltage | 90.60 | 43.040.10 | TC 22/SC 3 |
| ISO 12103-1:1997 Road vehicles -- Test dust for filter evaluation -- Part 1: Arizona test dust | 90.93 | 43.060.40 43.060.20 | TC 22/SC 7 |
| ISO 12103-2:1997 Road vehicles -- Test dust for filter evaluation -- Part 2: Aluminium oxide test dust | 90.93 | 43.060.20 43.060.40 | TC 22/SC 7 |
| ISO/TS 12104:2003 Road vehicles -- Gearshift patterns -- Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode | 60.60 | 43.040.50 | TC 22/SC 13 |
| ISO/TR 12155:1994 Commercial vehicles -- Obstacle detection device during reversing -- Requirements and tests | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 12156-1:2006 Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 1: Test method | 90.60 | 75.160.20 | TC 22/SC 7 |
| ISO 12156-2:2007 Diesel fuel -- Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -- Part 2: Limit | 90.20 | 75.160.20 | TC 22/SC 7 |
| ISO/PAS 12158:2002 Road vehicles -- Braking systems -- Temperature measuring methods | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 12161:2006 Road vehicles -- Endurance braking systems of motor vehicles and towed vehicles -- Test procedures | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO 12214:2002 Road vehicles -- Direction-of-motion stereotypes for automotive hand controls | 90.92 | 43.020 | TC 22/SC 13 |
| ISO/TR 12343:1997 Road vehicles -- Symbols for electrotechnical diagrams | 60.60 | 43.040.10 01.080.30 | TC 22/SC 3 |
| ISO 12345:2002 Diesel engines -- Cleanliness assessment of fuel injection equipment | 90.92 | 43.060.40 | TC 22/SC 7 |
| ISO/TR 12349-1:1999 Road vehicles -- Dummies for restraint system testing -- Part 1: Adult dummies | 60.60 | 43.180 | TC 22/SC 12 |
| ISO/TR 12349-2:1999 Road vehicles -- Dummies for restraint system testing -- Part 2: Child dummies | 60.60 | 43.180 | TC 22/SC 12 |
| ISO/TR 12350:2004 Road vehicles - Injury risk curves for evaluation of occupant protection in side impact | 60.60 | 43.020 | TC 22/SC 12 |
| ISO/TR 12351:1999 Road vehicles -- Determination of head contact and duration in impact tests | 60.60 | 43.020 | TC 22/SC 12 |
| ISO 12353-1:2002 Road vehicles -- Traffic accident analysis -- Part 1: Vocabulary | 90.60 | 43.040.80 01.040.43 | TC 22/SC 12 |
| ISO 12353-2:2003 Road vehicles -- Traffic accident analysis -- Part 2: Guidelines for the use of impact severity measures | 90.60 | 43.040.80 | TC 22/SC 12 |
| ISO 12357-1:1999/Cor 1:2007 | 60.60 | 43.040.70 | TC 22/SC 15 |
| ISO 12357-1:1999 Commercial road vehicles -- Drawbar couplings and eyes for rigid drawbars -- Strength tests -- Part 1: Strength tests for general cargo centre-axle trailers | 90.60 | 43.040.70 | TC 22/SC 15 |
| ISO 12357-2:2007 Commercial road vehicles -- Drawbar couplings and eyes for rigid drawbars -- Part 2: Strength tests for special applications | 60.60 | 43.040.70 | TC 22/SC 15 |
| ISO 12364:2001 Two-wheeled motorcycles -- Antilock braking systems (ABS) -- Tests and measurement methods | 90.60 | 43.140 43.040.40 | TC 22/SC 22 |
| ISO 12366:2001 Two-wheeled mopeds -- Antilock braking systems (ABS) -- Tests and measurement methods | 90.60 | 43.140 | TC 22/SC 23 |
| ISO 12667:1993 Commercial vehicles and buses -- Cross-tooth propeller shaft flanges, type T | 90.60 | 43.040.50 | TC 22/SC 15 |
| ISO/TR 13214:1996 Road vehicles -- Child restraint systems -- Compilation of regulations and standards | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 13215-1:2006 Road vehicles -- Reduction of misuse risk of child restraint systems -- Part 1: Forms for field studies | 90.93 | 43.040.80 | TC 22/SC 12 |
| ISO 13215-2:1999 Road vehicles -- Reduction of misuse risk of child restraint systems -- Part 2: Requirements and test procedures for correct installation (panel method) | 90.93 | 43.040.80 | TC 22/SC 12 |
| ISO 13215-3:1999 Road vehicles -- Reduction of misuse risk of child restraint systems -- Part 3: Prediction and assessment of misuse by Misuse Mode and Effect Analysis (MMEA) | 90.93 | 43.040.80 | TC 22/SC 12 |
| ISO 13216-1:1999 Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 1: Seat bight anchorages and attachments | 90.93 | 43.040.80 | TC 22/SC 12 |
| ISO 13216-1:1999/Amd 1:2006 CRF reduced height specification | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 13216-1:1999/Amd 3:2006 Specifications for the detection of use of ISOFIX CRS | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 13216-2:2004 Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 2: Top tether anchorages and attachments | 90.93 | 43.040.80 | TC 22/SC 12 |
| ISO 13216-3:2006 Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 3: Classification of child restraint dimensions and space in vehicle | 90.93 | 43.040.80 | TC 22/SC 12 |
| ISO 13218:1998 Road vehicles -- Child restraint systems -- Report form for accidents involving child passengers | 90.60 | 43.020 43.040.80 | TC 22/SC 12 |
| ISO/TR 13219:1995 Road vehicles -- Risk of thoracic injury associated with Hybrid III sternal deflection due to shoulder belt loading | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 13232-1:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 1: Definitions, symbols and general considerations | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13232-2:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 2: Definition of impact conditions in relation to accident data | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13232-3:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 3: Motorcyclist anthropometric impact dummy | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13232-4:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 4: Variables to be measured, instrumentation and measurement procedures | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13232-5:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 5: Injury indices and risk/benefit analysis | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13232-6:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 6: Full-scale impact-test procedures | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13232-7:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13232-8:2005 Motorcycles -- Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles -- Part 8: Documentation and reports | 90.60 | 43.140 | TC 22/SC 22 |
| ISO 13296:2005 Diesel engines -- High-pressure fuel injection pipe assemblies -- General requirements and dimensions | 90.92 | 43.060.40 | TC 22/SC 7 |
| ISO 13331:1995 Road vehicles -- Filler pipes and openings of motor vehicle fuel tanks -- Vapour recovery system | 90.93 | 43.060.40 | TC 22 |
| ISO/PAS 13396:2009 Road vehicles - Sled test method to enable the evaluation of side impact protection of child restraint systems - Essential parameters | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 13476:1997 Road vehicles -- Ignition coils -- Electrical characteristics and test methods | 90.93 | 43.060.50 | TC 22/SC 1 |
| ISO 13476:1997/Cor 1:1999 | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 13486-1:1999 Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats | 90.60 | 43.040.40 | TC 22/SC 2 |
| ISO/TR 13487:1997 Braking of road vehicles -- Considerations on the definition of mean fully developed deceleration | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO/TS 13499:2003 Road vehicles -- Multimedia data exchange format for impact tests | 60.60 | 43.020 | TC 22/SC 12 |
| ISO 13555-1:2003 Diesel engines -- Procedure for checking the dynamic timing of diesel fuel injection equipment -- Part 1: Preconditioning | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 13555-2:2003 Diesel engines -- Procedure for checking the dynamic timing of diesel fuel injection equipment -- Part 2: Test method | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 13555-3:2004 Diesel engines -- Procedure for checking the dynamic timing of diesel fuel injection equipment -- Part 3: Validation of timing measurement devices | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 13556:1998 Road vehicles -- Localization of exhaust system leaks and equipment specifications | 90.60 | 43.060.20 | TC 22/SC 5 |
| ISO 13674-1:2003 Road vehicles -- Test method for the quantification of on-centre handling -- Part 1: Weave test | 90.92 | 43.020 | TC 22/SC 9 |
| ISO 13674-2:2006 Road vehicles -- Test method for the quantification of on-centre handling -- Part 2: Transition test | 90.60 | 43.020 | TC 22/SC 9 |
| ISO 13837:2008 Road vehicles -- Safety glazing materials -- Method for the determination of solar transmittance | 60.60 | 43.040.60 81.040.30 | TC 22/SC 11 |
| ISO 13948-1:2000 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 1: Threaded connections | 90.93 | 43.060.40 | TC 22/SC 7 |
| ISO 13948-2:2000 Diesel engines -- Fuel injection pumps and fuel injector low-pressure connections -- Part 2: Non-threaded (push-on) connections | 90.92 | 43.060.40 | TC 22/SC 7 |
| ISO 13988:2008 Passenger vehicle wheels -- Clip balance weight and rim flange nomenclature, test procedures and performance requirements | 60.60 | 43.040.50 | TC 22/SC 19 |
| ISO 14229-1:2006 Road vehicles -- Unified diagnostic services (UDS) -- Part 1: Specification and requirements | 90.92 | 43.180 | TC 22/SC 3 |
| ISO 14230-1:1999 Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 1: Physical layer | 90.92 | 43.180 | TC 22/SC 3 |
| ISO 14230-2:1999 Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 2: Data link layer | 90.92 | 43.180 | TC 22/SC 3 |
| ISO 14230-3:1999 Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 3: Application layer | 90.20 | 43.180 | TC 22/SC 3 |
| ISO 14230-4:2000 Road vehicles -- Diagnostic systems -- Keyword Protocol 2000 -- Part 4: Requirements for emission-related systems | 90.20 | 43.180 | TC 22/SC 3 |
| ISO 14400:2005 Road vehicles -- Wheels and rims -- Use, general maintenance and safety requirements and out-of-service conditions | 90.60 | 43.040.50 | TC 22/SC 19 |
| ISO 14469-1:2004 Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 1: 20 MPa (200 bar) connector | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 14469-2:2007 Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 2: 20 MPa (200 bar) connector, size 2 | 60.60 | 43.060.40 | TC 22/SC 25 |
| ISO 14469-3:2006 Road vehicles -- Compressed natural gas (CNG) refuelling connector -- Part 3: 25 MPa (250 bar) connector | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 14508:2006 Road vehicles -- Spark-plugs -- Terminals | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 14512:1999 Passenger cars -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test procedure | 90.60 | 43.020 | TC 22/SC 9 |
| ISO 14513:2006 Road vehicles -- Pedestrian protection -- Head impact test method | 90.60 | 43.040.80 | TC 22/SC 10 |
| ISO 14513:2006/Cor 1:2007 | 60.60 | 43.040.80 | TC 22/SC 10 |
| ISO 14572:2006 Road vehicles -- Round, screened and unscreened 60 V and 600 V multi-core sheathed cables -- Test methods and requirements for basic and high-performance cables | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 14572:2001 Road vehicles -- Round, unscreened 60 V and 600 V multicore sheathed cables -- Test methods and requirements for basic and high performance cables | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO/TR 14645:1998 Road vehicles -- Test procedures for evaluating child restraint system interactions with deploying air bags | 60.60 | 43.040.80 | TC 22/SC 10 |
| ISO/TR 14646:2007 Road vehicles -- Side impact testing of child restraint systems -- Review of background data and test methods, and conclusions from the ISO work as of November 2005 | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 14681:1998 Diesel engines -- Fuel injection pump testing -- Calibrating fuel injectors | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 14722:1998 Moped and moped-rider kinematics -- Vocabulary | 90.60 | 01.040.43 43.140 | TC 22/SC 23 |
| ISO 14791:2000 Road vehicles -- Heavy commercial vehicle combinations and articulated buses -- Lateral stability test methods | 90.20 | 43.080.01 | TC 22/SC 9 |
| ISO 14792:2003 Road vehicles -- Heavy commercial vehicles and buses -- Steady-state circular tests | 90.60 | 43.080.01 | TC 22/SC 9 |
| ISO 14793:2003 Road vehicles -- Heavy commercial vehicles and buses -- Lateral transient response test methods | 90.92 | 43.080.01 | TC 22/SC 9 |
| ISO 14794:2003 Heavy commercial vehicles and buses -- Braking in a turn -- Open-loop test methods | 90.60 | 43.020 | TC 22/SC 9 |
| ISO/TR 14933:2001 Road vehicles -- Test procedures for evaluating occupant interactions with deploying side impact airbags | 90.92 | 43.020 | TC 22/SC 10 |
| ISO 15005:2002 Road vehicles -- Ergonomic aspects of transport information and control systems -- Dialogue management principles and compliance procedures | 90.60 | 43.040.15 13.180 | TC 22/SC 13 |
| ISO 15006:2004 Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and compliance procedures for in-vehicle auditory presentation | 90.92 | 35.240.60 43.040.15 | TC 22/SC 13 |
| ISO 15007-1:2002 Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 1: Definitions and parameters | 90.60 | 13.180 43.040.15 | TC 22/SC 13 |
| ISO/TS 15007-2:2001 Road vehicles -- Measurement of driver visual behaviour with respect to transport information and control systems -- Part 2: Equipment and procedures | 90.93 | 13.180 43.040.15 | TC 22/SC 13 |
| ISO 15008:2009 Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications and test procedures for in-vehicle visual presentation | 60.60 | 43.040.15 13.180 | TC 22/SC 13 |
| ISO 15031-1:2001 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 1: General information | 90.92 | 43.040.10 13.040.50 | TC 22/SC 3 |
| ISO/TR 15031-2:2004 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 2: Terms, definitions, abbreviations and acronyms | 90.92 | 01.040.43 43.040.10 13.040.50 | TC 22/SC 3 |
| ISO 15031-3:2004 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 3: Diagnostic connector and related electrical circuits, specification and use | 90.93 | 43.180 13.040.50 43.040.10 | TC 22/SC 3 |
| ISO 15031-4:2005 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 4: External test equipment | 90.92 | 13.040.50 43.180 | TC 22/SC 3 |
| ISO 15031-5:2006 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 5: Emissions-related diagnostic services | 90.92 | 43.040.10 13.040.50 | TC 22/SC 3 |
| ISO 15031-6:2005 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 6: Diagnostic trouble code definitions | 90.92 | 43.040.10 13.040.50 | TC 22/SC 3 |
| ISO 15031-7:2001 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 7: Data link security | 90.60 | 43.040.10 13.040.50 | TC 22/SC 3 |
| ISO 15037-1:2006 Road vehicles -- Vehicle dynamics test methods -- Part 1: General conditions for passenger cars | 90.60 | 43.100 | TC 22/SC 9 |
| ISO 15037-2:2002 Road vehicles -- Vehicle dynamics test methods -- Part 2: General conditions for heavy vehicles and buses | 90.92 | 43.080.01 | TC 22/SC 9 |
| ISO 15082:1999 Road vehicles -- Tests for rigid plastic safety glazing materials | 90.60 | 83.140.01 43.040.65 | TC 22/SC 11 |
| ISO 15170-1:2001 Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 1: Dimensions and classes of application | 90.60 | 43.040.10 | TC 22/SC 3 |
| ISO 15170-2:2001 Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 2: Tests and requirements | 90.60 | 43.040.10 | TC 22/SC 3 |
| ISO 15172:2005 Road vehicles -- Wheels -- Nut seat strength tests | 90.60 | 43.040.50 | TC 22/SC 19 |
| ISO/TR 15409:2002 Road vehicles -- Heat rating of spark plugs | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 15484:2008 Road vehicles -- Brake lining friction materials -- Product definition and quality assurance | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO/TR 15497:2000 Road vehicles -- Development guidelines for vehicle based software | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 15500-1:2000 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 1: General requirements and definitions | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-1:2000/Amd 1:2003 | 60.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-2:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 2: Performance and general test methods | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-3:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 3: Check valve | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-4:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 4: Manual valve | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-5:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 5: Manual cylinder valve | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-6:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 6: Automatic valve | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-7:2002 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 7: Gas injector | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-8:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 8: Pressure indicator | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-9:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 9: Pressure regulator | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-10:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 10: Gas-flow adjuster | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-11:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 11: Gas/air mixer | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-12:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 12: Pressure relief valve (PRV) | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-13:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 13: Pressure relief device (PRD) | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-14:2002 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 14: Excess flow valve | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-15:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 15: Gas-tight housing and ventilation hose | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-16:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 16: Rigid fuel line | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-17:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 17: Flexible fuel line | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-18:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 18: Filter | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-19:2001 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 19: Fittings | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15500-20:2007 Road vehicles -- Compressed natural gas (CNG) fuel system components -- Part 20: Rigid fuel line in material other than stainless steel | 60.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15501-1:2001 Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 1: Safety requirements | 90.92 | 43.060.40 | TC 22/SC 25 |
| ISO 15501-2:2001 Road vehicles -- Compressed natural gas (CNG) fuel systems -- Part 2: Test methods | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 15763:2002 Road vehicles -- Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t | 90.60 | 43.040.20 | TC 22 |
| ISO 15764:2004 Road vehicles -- Extended data link security | 90.60 | 43.180 | TC 22/SC 3 |
| ISO 15765-1:2004 Road vehicles -- Diagnostics on Controller Area Networks (CAN) -- Part 1: General information | 90.92 | 43.040.15 | TC 22/SC 3 |
| ISO 15765-2:2004 Road vehicles -- Diagnostics on Controller Area Networks (CAN) -- Part 2: Network layer services | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 15765-3:2004 Road vehicles -- Diagnostics on Controller Area Networks (CAN) -- Part 3: Implementation of unified diagnostic services (UDS on CAN) | 90.92 | 43.040.15 | TC 22/SC 3 |
| ISO 15765-4:2005 Road vehicles -- Diagnostics on Controller Area Networks (CAN) -- Part 4: Requirements for emissions-related systems | 90.92 | 43.040.15 | TC 22/SC 3 |
| ISO/TR 15766:2000 Road vehicles -- Pedestrian protection -- Targets for the assessment of the biofidelity of pedestrian-leg test devices | 60.60 | 43.180 | TC 22/SC 12 |
| ISO/TS 15827:2007 Road vehicles -- Test procedures -- Evaluating small female dummy arm and forearm interactions with driver frontal airbags and side airbags | 60.60 | 43.020 | TC 22/SC 10 |
| ISO 15828:2004 Road vehicles -- Offset frontal impact test procedure | 90.93 | 43.020 | TC 22/SC 10 |
| ISO 15829:2004 Road vehicles -- Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation | 90.92 | 43.020 | TC 22/SC 10 |
| ISO 15830-1:2005 Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 1: Terminology and rationale | 90.60 | 43.020 | TC 22/SC 12 |
| ISO 15830-2:2005 Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 2: Mechanical subsystems | 90.60 | 43.020 | TC 22/SC 12 |
| ISO 15830-3:2005 Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side-impact dummy -- Part 3: Electronic subsystems | 90.60 | 43.020 | TC 22/SC 12 |
| ISO 15830-4:2005 Road vehicles -- Design and performance specifications for the WorldSID 50th percentile male side impact dummy -- Part 4: User's manual | 90.60 | 43.020 | TC 22/SC 12 |
| ISO 16121-1:2005 Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 1: General description, basic requirements | 90.60 | 43.080.20 13.180 | TC 22/SC 13 |
| ISO 16121-2:2005 Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 2: Visibility | 90.60 | 43.080.20 13.180 | TC 22/SC 13 |
| ISO 16121-3:2005 Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 3: Information devices and controls | 90.60 | 13.180 43.080.20 | TC 22/SC 13 |
| ISO 16121-4:2005 Road vehicles -- Ergonomic requirements for the driver's workplace in line-service buses -- Part 4: Cabin environment | 90.60 | 13.180 43.080.20 | TC 22/SC 13 |
| ISO 16183:2002 Heavy duty engines -- Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions | 90.93 | 43.060.20 13.040.50 | TC 22/SC 5 |
| ISO 16185:2000 Road vehicles -- Engine families for certification of heavy-duty vehicles by Exhaust emission | 90.60 | 43.060.01 | TC 22/SC 5 |
| ISO 16232-1:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 1: Vocabulary | 60.60 | 43.180 01.040.43 13.040.50 | TC 22/SC 5 |
| ISO 16232-2:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 2: Method of extraction of contaminants by agitation | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-3:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 3: Method of extraction of contaminants by pressure rinsing | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-4:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 4: Method of extraction of contaminants by ultrasonic techniques | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-5:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 5: Method of extraction of contaminants on functional test bench | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-6:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 6: Particle mass determination by gravimetric analysis | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-7:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 7: Particle sizing and counting by microscopic analysis | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-8:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 8: Particle nature determination by microscopic analysis | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-9:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 9: Particle sizing and counting by automatic light extinction particle counter | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16232-10:2007 Road vehicles -- Cleanliness of components of fluid circuits -- Part 10: Expression of results | 60.60 | 13.040.50 43.180 | TC 22/SC 5 |
| ISO 16234:2006 Heavy commercial vehicles and buses -- Straight-ahead braking on surfaces with split coefficient of friction -- Open-loop test method | 90.60 | 43.080.01 | TC 22/SC 9 |
| ISO 16246:2005 Road vehicles -- M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 16247:2004 Road vehicles -- Detection of exhaust system leaks -- Helium test method and detection device specification | 90.93 | 43.060.20 | TC 22/SC 5 |
| ISO/TS 16332:2006 Diesel engines -- Fuel filters -- Method for evaluating fuel/water separation efficiency | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 16333:2004 Heavy commercial vehicles and buses -- Steady-state rollover threshold -- Tilt-table test method | 90.92 | 43.080.01 | TC 22/SC 9 |
| ISO/TR 16352:2005 Road vehicles -- Ergonomic aspects of in-vehicle presentation for transport information and control systems -- Warning systems | 60.60 | 43.040.15 13.180 | TC 22/SC 13 |
| ISO/TS 16553:2006 Road vehicles -- Data cables -- Test methods and requirements | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 16673:2007 Road vehicles -- Ergonomic aspects of transport information and control systems -- Occlusion method to assess visual demand due to the use of in-vehicle systems | 60.60 | 43.040.15 13.180 | TC 22/SC 13 |
| ISO 16750-1:2006 Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 1: General | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 16750-2:2006 Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 16750-3:2007 Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 3: Mechanical loads | 90.20 | 43.040.10 | TC 22/SC 3 |
| ISO 16750-4:2006 Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 4: Climatic loads | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 16750-5:2003 Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 5: Chemical loads | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 16833:2006 Road vehicles -- Wheels -- Measurement of radial and lateral run-out | 90.60 | 43.040.50 | TC 22/SC 19 |
| ISO 16844-1:2001 Road vehicles -- Tachograph systems -- Part 1: Electrical connectors | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-1:2001/Cor 1:2005 | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-2:2004 Road vehicles -- Tachograph systems -- Part 2: Recording unit, electrical interface | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-3:2004 Road vehicles -- Tachograph systems -- Part 3: Motion sensor interface | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-3:2004/Cor 1:2006 | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-4:2004 Road vehicles -- Tachograph systems -- Part 4: CAN interface | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-5:2004 Road vehicles -- Tachograph systems -- Part 5: Secured CAN interface | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-6:2004 Road vehicles -- Tachograph systems -- Part 6: Diagnostics | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 16844-7:2004 Road vehicles -- Tachograph systems -- Part 7: Parameters | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 16845:2004 Road vehicles -- Controller area network (CAN) -- Conformance test plan | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 16850:2007 Road vehicles -- Pedestrian protection -- Child head impact test method | 60.60 | 43.020 | TC 22/SC 10 |
| ISO/TS 16951:2004 Road vehicles -- Ergonomic aspects of transport information and control systems (TICS) -- Procedures for determining priority of on-board messages presented to drivers | 90.60 | 35.240.60 13.180 43.040.15 | TC 22/SC 13 |
| ISO 17287:2003 Road vehicles -- Ergonomic aspects of transport information and control systems -- Procedure for assessing suitability for use while driving | 90.60 | 13.180 43.040.15 | TC 22/SC 13 |
| ISO 17288-1:2002 Passenger cars -- Free-steer behaviour -- Part 1: Steering-release open-loop test method | 90.92 | 43.100 | TC 22/SC 9 |
| ISO 17288-2:2004 Passenger cars -- Free-steer behaviour -- Part 2: Steering-pulse open-loop test method | 90.92 | 43.100 | TC 22/SC 9 |
| ISO 17356-1:2005 Road vehicles -- Open interface for embedded automotive applications -- Part 1: General structure and terms, definitions and abbreviated terms | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 17356-2:2005 Road vehicles -- Open interface for embedded automotive applications -- Part 2: OSEK/VDX specifications for binding OS, COM and NM | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 17356-3:2005 Road vehicles -- Open interface for embedded automotive applications -- Part 3: OSEK/VDX Operating System (OS) | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 17356-4:2005 Road vehicles -- Open interface for embedded automotive applications -- Part 4: OSEK/VDX Communication (COM) | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 17356-5:2006 Road vehicles -- Open interface for embedded automotive applications -- Part 5: OSEK/VDX Network Management (NM) | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 17356-6:2006 Road vehicles -- Open interface for embedded automotive applications -- Part 6: OSEK/VDX Implementation Language (OIL) | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 17373:2005 Road vehicles -- Sled test procedure for evaluating occupant head and neck interactions with seat/head restraint designs in low-speed rear-end impact | 90.60 | 43.020 | TC 22/SC 10 |
| ISO 18207:2006 Road vehicles -- Trailers up to 3,5 t -- Control of welded towing brackets for coupling ball after fatigue testing | 90.60 | 43.040.70 43.100 | TC 22/SC 4 |
| ISO 18669-1:2004 Internal combustion engines -- Piston pins -- Part 1: General specifications | 90.92 | 43.060.10 | TC 22 |
| ISO 18669-2:2004 Internal combustion engines -- Piston pins -- Part 2: Inspection measuring principles | 90.93 | 43.060.10 | TC 22 |
| ISO 19072-1:2007 Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 1: Pocket interface definition | 90.20 | 43.040.10 | TC 22/SC 3 |
| ISO 19072-2:2007 Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 2: Test methods and general performance requirements | 90.20 | 43.040.10 | TC 22/SC 3 |
| ISO/TS 19072-3:2008 Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 3: Pyrotechnic device and harness connector assembly - type 1 | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO 19438:2003 Diesel fuel and petrol filters for internal combustion engines -- Filtration efficiency using particle counting and contaminant retention capacity | 90.60 | 43.060.40 | TC 22/SC 7 |
| ISO 19812:2006 Road vehicles -- M10 x 1 compact spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 19813:2006 Road vehicles -- Ignition systems -- Test methods and requirements for high voltage boots on plug-top coils and pencil coils | 90.60 | 43.040.10 | TC 22/SC 1 |
| ISO/TS 20119:2002 Road vehicles -- Test method for the quantification of on-centre handling -- Determination of dispersion metrics for straight-line driving | 60.60 | 43.100 | TC 22/SC 9 |
| ISO 20176:2006 Road vehicles -- H-point machine (HPM II) -- Specifications and procedure for H-point determination | 90.92 | 43.020 | TC 22/SC 13 |
| ISO 20653:2006 Road vehicles -- Degrees of protection (IP-Code) -- Protection of electrical equipment against foreign objects, water and access | 90.92 | 43.040.10 | TC 22/SC 3 |
| ISO/TS 20825:2003 Road vehicles -- Drawbar couplings, drawbar eyes, fifth wheel kingpins, hook couplings and toroidal eyes -- Wear limits for in-use mechanical couplings | 60.60 | 43.040.70 | TC 22/SC 15 |
| ISO 20826:2006 Automotive LPG components -- Containers | 90.60 | 43.060.40 | TC 22/SC 25 |
| ISO 20828:2006 Road vehicles -- Security certificate management | 90.93 | 43.020 | TC 22/SC 3 |
| ISO 20860-1:2008 Road vehicles -- 50 ohms impedance radio frequency connection system interface -- Part 1: Dimensions and electrical requirements | 60.60 | 43.040.10 | TC 22 |
| ISO 20860-2:2009 Road vehicles -- 50 ohms impedance radio frequency connection system interface -- Part 2: Test procedures | 60.60 | 43.040.10 | TC 22 |
| ISO 20918:2007 Road vehicles -- Braking threshold pressures for heavy commercial vehicle combinations with fully pneumatic braking systems -- Test with roller brake tester | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 21069-1:2004 Road vehicles -- Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester -- Part 1: Pneumatic braking systems | 90.93 | 43.040.40 | TC 22/SC 2 |
| ISO 21069-2:2008 Road vehicles -- Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester -- Part 2: Air over hydraulic and purely hydraulic braking systems | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO/PAS 21308-1:2007 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 1: General principles | 60.60 | 43.080.01 | TC 22/SC 15 |
| ISO 21308-2:2006 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 2: Dimensional bodywork exchange parameters | 90.60 | 43.080.01 | TC 22/SC 15 |
| ISO 21308-3:2007 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 3: General, mass and administrative exchange parameters | 60.60 | 43.080.01 | TC 22/SC 15 |
| ISO/TS 21308-4:2007 Road vehicles -- Product data exchange between chassis and bodywork manufacturers (BEP) -- Part 4: Mapping to STEP application protocol 239 | 60.60 | 43.080.01 | TC 22/SC 15 |
| ISO/TS 21609:2003 Road vehicles -- (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment | 60.60 | 33.100.01 43.040.10 | TC 22/SC 3 |
| ISO 21750:2006 Road vehicles -- Safety enhancement in conjunction with tyre inflation pressure monitoring | 90.92 | 43.040.80 83.160.10 | TC 22 |
| ISO 21848:2005 Road vehicles -- Electrical and electronic equipment for a supply voltage of 42 V -- Electrical loads | 90.93 | 43.040.10 | TC 22/SC 3 |
| ISO 21994:2007 Passenger cars -- Stopping distance at straight-line braking with ABS -- Open-loop test method | 90.20 | 43.040.40 | TC 22/SC 9 |
| ISO 21995:2008 Road vehicles -- Test of vehicle air braking systems with a permissible mass of over 3,5 t -- Acquisition and use of reference values using a roller brake tester | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 22168:2006 Road vehicles -- Holding test of coatings influencing the colour of light emitted by light source(s) -- Test methods | 90.60 | 43.040.20 | TC 22/SC 8 |
| ISO/TS 22240:2008 Road vehicles -- Vehicles safety information model (VSIM) | 60.60 | 43.040.80 | TC 22/SC 12 |
| ISO 22241-1:2006 Diesel engines -- NOx reduction agent AUS 32 -- Part 1: Quality requirements | 90.60 | 43.060.40 | TC 22/SC 5 |
| ISO 22241-2:2006 Diesel engines -- NOx reduction agent AUS 32 -- Part 2: Test methods | 90.60 | 43.060.40 | TC 22/SC 5 |
| ISO 22241-2:2006/Cor 1:2008 | 60.60 | 43.060.40 | TC 22/SC 5 |
| ISO 22241-3:2008 Diesel engines -- NOx reduction agent AUS 32 -- Part 3: Handling, transportation and storing | 60.60 | 43.060.40 | TC 22/SC 5 |
| ISO 22241-4:2009 Diesel engines -- NOx reduction agent AUS 32 -- Part 4: Refilling interface | 60.60 | 43.060.40 | TC 22/SC 5 |
| ISO/PAS 22574:2007 Road vehicles -- Brake linings frictions materials -- Visual inspection | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 22628:2002 Road vehicles -- Recyclability and recoverability -- Calculation method | 90.60 | 43.020 | TC 22 |
| ISO 22896:2006 Road vehicles -- Deployment and sensor bus for occupant safety systems | 90.60 | 43.040.80 | TC 22/SC 3 |
| ISO 22900-1:2008 Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 1: Hardware design requirements | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 22900-2:2009 Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 2: Diagnostic protocol data unit application programming interface (D-PDU API) | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 22900-3:2009 Road vehicles -- Modular vehicle communication interface (MVCI) -- Part 3: Diagnostic server application programming interface (D-Server API) | 60.60 | 43.040.15 | TC 22/SC 3 |
| ISO 22901-1:2008 Road vehicles -- Open diagnostic data exchange (ODX) -- Part 1: Data model specification | 60.60 | 43.180 | TC 22/SC 3 |
| ISO 22902-1:2006 Road vehicles -- Automotive multimedia interface -- Part 1: General technical overview | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 22902-2:2006 Road vehicles -- Automotive multimedia interface -- Part 2: Use cases | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 22902-3:2006 Road vehicles -- Automotive multimedia interface -- Part 3: System requirements | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 22902-4:2006 Road vehicles -- Automotive multimedia interface -- Part 4: Network protocol requirements for vehicle interface access | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 22902-5:2006 Road vehicles -- Automotive multimedia interface -- Part 5: Common message set | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 22902-6:2006 Road vehicles -- Automotive multimedia interface -- Part 6: Vehicle interface requirements | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 22902-7:2006 Road vehicles -- Automotive multimedia interface -- Part 7: Physical specification | 90.93 | 43.040.15 | TC 22/SC 3 |
| ISO 22977:2005 Road vehicles -- M12 x 1,25 spark-plugs with flat seating and 14 mm bi-hexagon and their cylinder head housing | 90.60 | 43.060.50 | TC 22/SC 1 |
| ISO 23273-1:2006 Fuel cell road vehicles -- Safety specifications -- Part 1: Vehicle functional safety | 90.60 | 43.120 | TC 22/SC 21 |
| ISO 23273-2:2006 Fuel cell road vehicles -- Safety specifications -- Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen | 90.60 | 43.120 | TC 22/SC 21 |
| ISO 23273-3:2006 Fuel cell road vehicles -- Safety specifications -- Part 3: Protection of persons against electric shock | 90.60 | 43.120 | TC 22/SC 21 |
| ISO 23274:2007 Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption measurements -- Non-externally chargeable vehicles | 90.20 | 43.120 | TC 22/SC 21 |
| ISO 23828:2008 Fuel cell road vehicles - Energy consumption measurement -- Vehicles fuelled with compressed hydrogen | 60.60 | 43.120 | TC 22/SC 21 |
| ISO 25981:2008 Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 25981:2008/Cor 1:2008 | 60.60 | 43.040.10 | TC 22/SC 3 |
| ISO 26021-1:2008 Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 1: General information and use case definitions | 60.60 | 43.040.80 | TC 22/SC 3 |
| ISO 26021-2:2008 Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 2: Communication requirements | 60.60 | 43.040.80 | TC 22/SC 3 |
| ISO 26021-2:2008/Cor 1:2009 | 60.60 | 43.040.80 | TC 22/SC 3 |
| ISO 26021-3:2009 Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 3: Tool requirements | 60.60 | 43.040.80 | TC 22/SC 3 |
| ISO 26021-4:2009 Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 4: Additional communication line with bidirectional communication | 60.60 | 43.040.80 | TC 22/SC 3 |
| ISO 26021-5:2009 Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 5: Additional communication line with pulse width modulated signal | 60.60 | 43.040.80 | TC 22/SC 3 |
| ISO 26865:2009 Road vehicles -- Brake lining friction materials -- Standard performance test procedure for commercial vehicles with air brakes | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 26866:2009 Road vehicles -- Brake lining friction materials -- Standard wear test procedure for commercial vehicles with air brakes | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO 26867:2009 Road vehicles -- Brake lining friction materials -- Friction behaviour assessment for automotive brake systems | 60.60 | 43.040.40 | TC 22/SC 2 |
| ISO/PAS 27145-1:2006 Road vehicles -- Implementation of WWH-OBD communication requirements -- Part 1: General information and use case definition | 90.92 | 43.180 43.040.10 | TC 22/SC 3 |
| ISO/PAS 27145-2:2006 Road vehicles -- Implementation of WWH-OBD communication requirements -- Part 2: Common emissions-related data dictionary | 90.92 | 43.180 43.040.10 | TC 22/SC 3 |
| ISO/PAS 27145-3:2006 Road vehicles -- Implementation of WWH-OBD communication requirements -- Part 3: Common message dictionary | 90.92 | 43.040.10 43.180 | TC 22/SC 3 |
| ISO/PAS 27145-4:2006 Road vehicles -- Implementation of WWH-OBD communication requirements -- Part 4: Connection between vehicle and test equipment | 90.92 | 43.040.10 43.180 | TC 22/SC 3 |
| ISO 27956:2009 Road vehicles -- Securing of cargo in delivery vans -- Requirements and test methods | 60.60 | 43.020 | TC 22/SC 12 |
| ISO/TR 27957:2008 Road vehicles -- Temperature measurement in anthropomorphic test devices -- Definition of the temperature sensor locations | 60.60 | 43.180 | TC 22/SC 12 |
| ISO 28741:2009 Road vehicles -- Spark-plugs and their cylinder head housings -- Basic characteristics and dimensions | 60.60 | 43.060.50 | TC 22/SC 1 |
| ISO 28981:2009 Mopeds - Methods for setting the running resistance on a chassis dynamometer | 60.60 | 43.140 | TC 22/SC 23 |
| ISO/TS 29062:2009 Road vehicles - Child restraint systems - Sled test method to enable the evaluation of side impact protection | 60.60 | 43.040.80 | TC 22/SC 12 |
News feeds
