Home

Standards catalogue

Subscribe to updates

ISO/TC 20  - Aircraft and space vehicles

Items to be displayed:


Subcommittees

Subcommittee Subcommittee Title
ISO/TC 20/SC 1 Aerospace electrical requirements
ISO/TC 20/SC 4 Aerospace fastener systems
ISO/TC 20/SC 6 Standard atmosphere
ISO/TC 20/SC 8 Aerospace terminology
ISO/TC 20/SC 9 Air cargo and ground equipment
ISO/TC 20/SC 10 Aerospace fluid systems and components
ISO/TC 20/SC 13 Space data and information transfer systems
ISO/TC 20/SC 14 Space systems and operations
ISO/TC 20/SC 16 Unmanned aircraft systems
ISO/TC 20/SC 17 Airport infrastructure

Standards and projects under the direct responsibility of ISO/TC 20 Secretariat

Standard and/or projectStageICS
ISO 44:1975
Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation
90.93 49.060
ISO 46:1973
Aircraft -- Fuel nozzle grounding plugs and sockets
90.93 49.100
ISO 244:1979
Aircraft -- Sealing wire
90.93 49.030.99
ISO 268:1980
Aircraft -- Mechanical and electromechanical indicators -- General requirements
90.93 49.090
ISO 413:1974
Aircraft -- Heads of lubricating nipples
90.93 49.100
49.035
ISO 482:1977
Aircraft -- Propulsion units and components -- Methods of numbering and describing direction of rotation
90.60 49.050
ISO 1002:1983
Rolling bearings -- Airframe bearings -- Characteristics, boundary dimensions, tolerances, static load ratings
90.60 49.035
ISO 1021:1980
Aircraft -- Engine nacelle fire extinguisher apertures and doors
90.93 49.100
ISO 1971:1975
Aircraft -- Accessory drives and mounting pads
90.93 49.035
ISO 2020-1:1997
Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 1: Dimensions and loads
90.60 49.035
ISO 2020-2:1997
Aerospace -- Preformed flexible steel wire rope for aircraft controls -- Part 2: Technical specification
90.60 49.035
ISO 2669:1995
Environmental tests for aircraft equipment -- Steady-state acceleration
90.93 49.020
ISO 2671:1982
Environmental tests for aircraft equipment -- Part 3.4 : Acoustic vibration
90.60 17.140.30
49.020
ISO 2685:1998
Aircraft -- Environmental test procedure for airborne equipment -- Resistance to fire in designated fire zones
90.60 49.020
ISO 4153:1981
Aircraft -- Pressure fuel dispensing system -- Test procedure and limit value for shut-off surge pressure
90.93 49.050
49.100
ISO 7137:1995
Aircraft -- Environmental conditions and test procedures for airborne equipment
90.93 49.020
ISO 7938:1986
Aircraft -- Ball bearings for control cable pulleys -- Dimensions and loads
90.60 49.035
ISO 7939:1988
Aircraft -- Non-metallic pulleys with ball bearings for control cables -- Dimensions and loads
90.93 49.035
ISO 8074:1985
Aerospace -- Surface treatment of austenitic stainless steel parts
90.93 49.040
ISO 8075:1985
Aerospace -- Surface treatment of hardenable stainless steel parts
90.93 49.040
ISO 8078:1984
Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process, undyed coating
90.93 49.040
ISO 8079:1984
Aerospace process -- Anodic treatment of aluminium alloys -- Sulfuric acid process, dyed coating
90.93 49.040
ISO 8080:1985
Aerospace -- Anodic treatment of titanium and titanium alloys -- Sulfuric acid process
90.93 49.040
ISO 8081:1985
Aerospace process -- Chemical conversion coating for aluminium alloys -- General purpose
90.93 49.040
ISO 8399-1:1998
Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 1: Design criteria
90.60 49.035
ISO 8399-2:1998
Aerospace -- Accessory drives and mounting flanges (Metric series) -- Part 2: Dimensions
90.60 49.035
ISO 8591-1:1989
Aerospace -- Wrought aluminium and aluminium alloys -- Inspection, testing and supply requirements -- Part 1: General requirements
90.93 49.025.20
ISO 9216:2002
Aerospace -- Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.60 49.030.30
ISO 9217:2002
Aerospace -- Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.60 49.030.50
ISO 9218:2002
Aerospace -- Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.60 49.030.50
ISO 9219:2002
Aerospace -- Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium plated or in titanium alloy and MoS2 lubricated or in corrosion-resistant steel and passivated -- Dimensions and masses
90.60 49.030.20
ISO 9662:1994
Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests
90.93 49.020
ISO 9736:2000
Aerospace -- Eye-ends, in steel, threaded, for aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9737:2000
Aerospace -- Eye-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9738:2000
Aerospace -- Turnbarrels, for aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9747:2000
Aerospace -- Double-shank ball-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9748:2000
Aerospace -- Ball-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9749:2000
Aerospace -- Stud-ends, in corrosion-resistant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9757:2000
Aerospace -- Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels -- Dimensions and loads
90.93 49.035
ISO 9758:2000
Aerospace -- Fork-ends, in steel, threaded, for rolling bearings, for aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9759:2000
Aerospace -- Fork-ends, in corrosion-resistiant steel, swaged on aircraft control wire rope -- Dimensions and loads
90.93 49.035
ISO 9760:2000
Aerospace -- Fork-ends, in corrosion-resistant steel, swaged on aircraft control wire rope for rolling bearings -- Dimensions and loads
90.93 49.035
ISO 9761:2000
Aerospace -- Locking clips, in corrosion-resistant steel, for aircraft control wire rope turnbuckles -- Dimensions
90.93 49.035
ISO 9762:2000
Aerospace -- Aircraft control wire rope assemblies -- Dimensions and end-fitting combinations
90.93 49.035
ISO 9763:1999
Aerospace -- Aircraft control wire rope assemblies -- Technical specification
90.93 49.035
ISO/TR 10201:2001
Aerospace -- Standards for electronic instruments and systems
60.60 49.090
ISO 10792-1:1995
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 1: Metric series
90.60 49.035
ISO 10792-2:1995
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 2: Inch series
90.60 49.035
ISO 10792-3:1995
Aerospace -- Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner -- Part 3: Technical specification
90.60 49.035
ISO 10955:1999
Aerospace -- End-fittings and turnbarrels for aircraft control wire rope -- Technical specification
90.93 49.035
ISO 13411:1997
Aerospace -- Airframe needle roller, cylindrical roller and track roller bearings -- Technical specification
90.60 49.035
ISO 13412:1997
Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Inch series
90.60 49.035
ISO 13413:1997
Aerospace -- Airframe needle track roller, yoke type, double-row, sealed -- Inch series
90.60 49.035
ISO 13414:1997
Aerospace -- Airframe needle roller bearings, single-row, shielded -- Inch series
90.93 49.035
ISO 13415:1997
Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Inch series
90.60 49.035
ISO 13416:1997
Aerospace -- Airframe needle track roller, yoke type, single-row, sealed -- Metric series
90.60 49.035
ISO 13417:1997
Aerospace -- Airframe needle track roller, stud type, single-row, sealed -- Metric series
90.60 49.035
ISO 14190:1998
Aerospace -- Airframe rolling bearings: ball and spherical roller bearings -- Technical specification
90.93 49.035
ISO 14191:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 -- Metric series
90.93 49.035
ISO 14192:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty -- Metric series
90.93 49.035
ISO 14193:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty -- Inch series
90.93 49.035
ISO 14194:1998
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty -- Inch series
90.93 49.035
ISO 14195:1998
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty -- Inch series
90.93 49.035
ISO 14196:1998
Aerospace -- Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty -- Inch series
90.93 49.035
ISO 14197:1998
Aerospace -- Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty -- Inch series
90.93 49.035
ISO 14201:1998
Aerospace -- Airframe ball bearings, double-row, self-aligning, diameter series 2 -- Metric series
90.93 49.035
ISO 14202:1998
Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 0 and 2 -- Metric series
90.93 49.035
ISO 14203:1998
Aerospace -- Airframe ball bearings, single-row, rigid, diameter series 8 and 9 -- Metric series
90.93 49.035
ISO 14204:1998
Aerospace -- Airframe ball bearings, double-row, rigid, diameter series 0 -- Metric series
90.93 49.035
ISO 14206:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, light duty -- Inch series
90.93 49.035
ISO 14207:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, light duty -- Inch series
90.93 49.035
ISO 14208:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, intermediate duty -- Inch series
90.93 49.035
ISO 14209:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty -- Inch series
90.93 49.035
ISO 14210:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty -- Inch series
90.93 49.035
ISO 14211:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty -- Inch series
90.93 49.035
ISO 14212:1998
Aerospace -- Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty -- Inch series
90.93 49.035
ISO 14213:1998
Aerospace -- Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, extra-light duty -- Inch series
90.93 49.035
ISO 14214:1998
Aerospace -- Airframe ball bearings, double-row, rigid, sealed, heavy duty -- Inch series
90.93 49.035
ISO 14215:1998
Aerospace -- Airframe ball bearings, double-row, rigid, precision, sealed, heavy duty -- Inch series
90.93 49.035
ISO 14216:1998
Aerospace -- Airframe ball bearings, double-row, self-aligning, sealed, heavy duty -- Inch series
90.93 49.035
ISO 14217:1998
Aerospace -- Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty -- Inch series
90.93 49.035
ISO 14218:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, heavy duty -- Inch series
90.93 49.035
ISO 14219:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, heavy duty -- Inch series
90.93 49.035
ISO 14220:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, sealed, light duty -- Inch series
90.93 49.035
ISO 14221:1998
Aerospace -- Airframe ball bearings, single-row, self-aligning, precision, sealed, light duty -- Inch series
90.93 49.035
ISO 21849:2006
Aircraft and space -- Industrial data -- Product identification and traceability
90.93 49.020
35.240.60