TC 17 - Steel
Items to be displayed:
Standards and projects under the direct responsibility of TC 17 Secretariat and its SCs
| Standard and/or project | ICS | TC | |
|---|---|---|---|
| ISO 377:1997 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing | 90.60 | 77.040.10 | TC 17/SC 20 |
| ISO 377:1997/Cor 1:1997 | 60.60 | 77.040.10 | TC 17/SC 20 |
| ISO 404:1992 Steel and steel products -- General technical delivery requirements | 90.60 | 77.140.01 77.080.20 | TC 17/SC 20 |
| ISO 437:1982 Steel and cast iron -- Determination of total carbon content -- Combustion gravimetric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 439:1994 Steel and iron -- Determination of total silicon content -- Gravimetric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 629:1982 Steel and cast iron -- Determination of manganese content -- Spectrophotometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 630:1995 Structural steels -- Plates, wide flats, bars, sections and profiles | 90.92 | 77.140.01 | TC 17/SC 3 |
| ISO 630:1995/Amd 1:2003 | 60.60 | 77.140.01 | TC 17/SC 3 |
| ISO 642:1999 Steel -- Hardenability test by end quenching (Jominy test) | 90.20 | 77.040.99 | TC 17/SC 7 |
| ISO 643:2003 Steels -- Micrographic determination of the apparent grain size | 60.60 | 77.040.99 | TC 17/SC 7 |
| ISO 657-1:1989 Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions | 90.20 | 77.140.70 | TC 17 |
| ISO 657-2:1989 Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions | 90.20 | 77.140.70 | TC 17 |
| ISO 657-5:1976 Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series | 90.93 | 77.140.70 | TC 17 |
| ISO 657-11:1980 Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties | 90.93 | 77.140.70 | TC 17 |
| ISO 657-15:1980 Hot-rolled steel sections -- Part 15: Sloping flange beam sections (Metric series) -- Dimensions and sectional properties | 90.93 | 77.140.70 | TC 17 |
| ISO 657-16:1980 Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties | 90.93 | 77.140.70 | TC 17 |
| ISO 657-18:1980 Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances | 90.93 | 47.020.05 77.140.70 | TC 17 |
| ISO 657-19:1980 Hot-rolled steel sections -- Part 19: Bulb flats (metric series) -- Dimensions, sectional properties and tolerances | 90.93 | 77.140.70 | TC 17 |
| ISO 657-21:1983 Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions | 90.20 | 77.140.70 | TC 17 |
| ISO 671:1982 Steel and cast iron -- Determination of sulphur content -- Combustion titrimetric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 683-1:1987 Heat-treatable steels, alloy steels and free-cutting steels -- Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products | 90.92 | 77.140.45 77.140.20 77.140.10 | TC 17/SC 4 |
| ISO 683-9:1988 Heat-treatable steels, alloy steels and free-cutting steels -- Part 9: Wrought free-cutting steels | 90.60 | 77.140.10 77.140.20 | TC 17/SC 4 |
| ISO 683-10:1987 Heat-treatable steels, alloy steels and free-cutting steels -- Part 10: Wrought nitriding steels | 90.93 | 77.140.10 77.140.20 | TC 17/SC 4 |
| ISO 683-11:1987 Heat-treatable steels, alloy steels and free-cutting steels -- Part 11: Wrought case-hardening steels | 90.92 | 77.140.10 77.140.20 | TC 17/SC 4 |
| ISO 683-14:2004 Heat-treatable steels, alloy steels and free-cutting steels -- Part 14: Hot-rolled steels for quenched and tempered springs | 90.93 | 77.140.25 | TC 17/SC 4 |
| ISO 683-15:1992 Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines | 90.93 | 77.140.10 27.020 77.140.20 | TC 17/SC 4 |
| ISO 683-17:1999 Heat-treated steels, alloy steels and free-cutting steels -- Part 17: Ball and roller bearing steels | 90.20 | 77.140.20 77.140.10 | TC 17/SC 4 |
| ISO 683-18:1996 Heat-treatable steels, alloy steels and free- cutting steels -- Part 18: Bright products of unalloyed and low alloy steels | 90.93 | 77.140.20 77.140.10 77.140.45 | TC 17/SC 4 |
| ISO 1005-1:1994 Railway rolling stock material -- Part 1: Rough-rolled tyres for tractive and trailing stock -- Technical delivery conditions | 90.20 | 77.140.99 45.060.01 | TC 17 |
| ISO 1005-2:1986 Railway rolling stock material -- Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock -- Dimensional, balancing and assembly requirements | 90.93 | 77.140.99 45.060.01 | TC 17 |
| ISO 1005-3:1982 Railway rolling stock material -- Part 3: Axles for tractive and trailing stock -- Quality requirements | 90.20 | 45.060.01 77.140.99 | TC 17 |
| ISO 1005-4:1986 Railway rolling stock material -- Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock -- Quality requirements | 90.93 | 77.140.99 45.060.01 | TC 17 |
| ISO 1005-6:1994 Railway rolling stock material -- Part 6: Solid wheels for tractive and trailing stock -- Technical delivery conditions | 90.20 | 77.140.99 45.060.01 | TC 17 |
| ISO 1005-7:1982 Railway rolling stock material -- Part 7: Wheelsets for tractive and trailing stock -- Quality requirements | 90.20 | 45.060.01 77.140.99 | TC 17 |
| ISO 1005-8:1986 Railway rolling stock material -- Part 8: Solid wheels for tractive and trailing stock -- Dimensional and balancing requirements | 90.93 | 45.060.01 77.140.99 | TC 17 |
| ISO 1005-9:1986 Railway rolling stock material -- Part 9: Axles for tractive and trailing stock -- Dimensional requirements | 90.93 | 77.140.99 45.060.01 | TC 17 |
| ISO 1035-1:1980 Hot-rolled steel bars -- Part 1: Dimensions of round bars | 90.93 | 77.140.60 | TC 17 |
| ISO 1035-2:1980 Hot-rolled steel bars -- Part 2: Dimensions of square bars | 90.93 | 77.140.60 | TC 17 |
| ISO 1035-3:1980 Hot-rolled steel bars -- Part 3: Dimensions of flat bars | 90.93 | 77.140.60 | TC 17 |
| ISO 1035-4:1982 Hot-rolled steel bars -- Part 4: Tolerances | 90.93 | 77.140.60 | TC 17 |
| ISO 1052:1982 Steels for general engineering purposes | 90.20 | 77.140.01 | TC 17/SC 3 |
| ISO 2566-1:1984 Steel -- Conversion of elongation values -- Part 1: Carbon and low alloy steels | 90.20 | 77.040.10 | TC 17/SC 20 |
| ISO 2566-2:1984 Steel -- Conversion of elongation values -- Part 2: Austenitic steels | 90.20 | 77.040.10 | TC 17/SC 20 |
| ISO 2605-3:1985 Steel products for pressure purposes -- Derivation and verification of elevated temperature properties -- Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited | 90.93 | 77.140.30 | TC 17 |
| ISO 2639:2002 Steels -- Determination and verification of the depth of carburized and hardened cases | 60.60 | 77.040.99 | TC 17/SC 7 |
| ISO 3573:2008 Hot-rolled carbon steel sheet of commercial and drawing qualities | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 3574:2008 Cold-reduced carbon steel sheet of commercial and drawing qualities | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 3575:2005 Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 3651-1:1998 Determination of resistance to intergranular corrosion of stainless steels -- Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) | 90.60 | 77.060 | TC 17/SC 7 |
| ISO 3651-2:1998 Determination of resistance to intergranular corrosion of stainless steels -- Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels -- Corrosion test in media containing sulfuric acid | 90.60 | 77.060 | TC 17/SC 7 |
| ISO 3754:1976 Steel -- Determination of effective depth of hardening after flame or induction hardening | 90.93 | 77.040.99 | TC 17/SC 7 |
| ISO 3755:1991 Cast carbon steels for general engineering purposes | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 3763:1976 Wrought steels -- Macroscopic methods for assessing the content of non-metallic inclusions | 90.93 | 77.040.99 | TC 17/SC 7 |
| ISO 3887:2003 Steels -- Determination of depth of decarburization | 60.60 | 77.040.99 | TC 17/SC 7 |
| ISO 4829-1:1986 Steel and cast iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 and 1,0 % | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 4829-2:1988 Steel and iron -- Determination of total silicon content -- Reduced molybdosilicate spectrophotometric method -- Part 2: Silicon contents between 0,01 and 0,05 % | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO/TR 4830-4:1978 Steel -- Determination of low carbon contents -- Part 4: Coulometric method after combustion | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 4885:1996 Ferrous products -- Heat treatments -- Vocabulary | 90.93 | 01.040.25 01.040.77 25.200 77.140.01 | TC 17 |
| ISO 4934:2003 Steel and iron -- Determination of sulfur content -- Gravimetric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 4935:1989 Steel and iron -- Determination of sulfur content -- Infrared absorption method after combustion in an induction furnace | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 4937:1986 Steel and iron -- Determination of chromium content -- Potentiometric or visual titration method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 4938:1988 Steel and iron -- Determination of nickel content -- Gravimetric or titrimetric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 4939:1984 Steel and cast iron -- Determination of nickel content -- Dimethylglyoxime spectrophotometric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 4940:1985 Steel and cast iron -- Determination of nickel content -- Flame atomic absorption spectrometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 4941:1994 Steel and iron -- Determination of molybdenum content -- Thiocyanate spectrophotometric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 4942:1988 Steel and iron -- Determination of vanadium content -- N-BPHA spectrophotometric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 4943:1985 Steel and cast iron -- Determination of copper content -- Flame atomic absorption spectrometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 4945:1977 Steel -- Determination of nitrogen content -- Spectrophotometric method | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 4946:1984 Steel and cast iron -- Determination of copper content -- 2,2'-Diquinolyl spectrophotometric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 4947:1986 Steel and cast iron -- Determination of vanadium content -- Potentiometric titration method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 4948-1:1982 Steels -- Classification -- Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition | 90.93 | 77.080.20 | TC 17 |
| ISO 4948-2:1981 Steels -- Classification -- Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics | 90.93 | 77.080.20 | TC 17 |
| ISO/TS 4949:2003 Steel names based on letter symbols | 90.93 | 77.080.20 | TC 17 |
| ISO 4950-1:1995 High yield strength flat steel products -- Part 1: General requirements | 90.93 | 77.140.50 | TC 17/SC 3 |
| ISO 4950-1:1995/Amd 1:2003 | 60.60 | 77.140.50 | TC 17/SC 3 |
| ISO 4950-2:1995 High yield strength flat steel products -- Part 2: Products supplied in the normalized or controlled rolled condition | 90.93 | 77.140.50 | TC 17/SC 3 |
| ISO 4950-2:1995/Amd 1:2003 | 60.60 | 77.140.50 | TC 17/SC 3 |
| ISO 4950-3:1995 High yield strength flat steel products -- Part 3: Products supplied in the heat-treated (quenched + tempered) condition | 90.93 | 77.140.50 | TC 17/SC 3 |
| ISO 4950-3:1995/Amd 1:2003 | 60.60 | 77.140.50 | TC 17/SC 3 |
| ISO 4951-1:2001 High yield strength steel bars and sections -- Part 1: General delivery requirements | 90.93 | 77.140.70 77.140.60 | TC 17/SC 3 |
| ISO 4951-2:2001 High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels | 90.93 | 77.140.70 77.140.60 | TC 17/SC 3 |
| ISO 4951-3:2001 High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanically-rolled steels | 90.93 | 77.140.70 77.140.60 | TC 17/SC 3 |
| ISO 4952:2006 Structural steels with improved atmospheric corrosion resistance | 90.20 | 77.140.20 | TC 17/SC 3 |
| ISO 4954:1993 Steels for cold heading and cold extruding | 90.60 | 77.140.20 77.140.10 | TC 17/SC 4 |
| ISO 4955:2005 Heat-resistant steels | 90.93 | 77.140.20 | TC 17/SC 4 |
| ISO 4957:1999 Tool steels | 90.20 | 77.140.35 | TC 17/SC 4 |
| ISO 4960:2007 Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 4967:1998 Steel -- Determination of content of nonmetallic inclusions -- Micrographic method using standard diagrams | 90.60 | 77.040.99 | TC 17/SC 7 |
| ISO 4968:1979 Steel -- Macrographic examination by sulfur print (Baumann method) | 90.20 | 77.040.99 | TC 17/SC 7 |
| ISO 4969:1980 Steel -- Macroscopic examination by etching with strong mineral acids | 90.20 | 77.040.99 | TC 17/SC 7 |
| ISO 4970:1979 Steel -- Determination of total or effective thickness of thin surface-hardened layers | 90.20 | 77.040.99 | TC 17/SC 7 |
| ISO 4978:1983 Flat rolled steel products for welded gas cylinders | 90.93 | 77.140.30 | TC 17/SC 10 |
| ISO 4986:1992 Steel castings -- Magnetic particle inspection | 90.92 | 77.040.20 77.140.80 | TC 17/SC 11 |
| ISO 4987:1992 Steel castings -- Penetrant inspection | 90.92 | 77.040.20 77.140.80 | TC 17/SC 11 |
| ISO 4990:2003 Steel castings -- General technical delivery requirements | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 4991:2005 Steel castings for pressure purposes | 90.60 | 77.140.80 77.140.30 | TC 17/SC 11 |
| ISO 4992-1:2006 Steel castings -- Ultrasonic examination -- Part 1: Steel castings for general purposes | 90.60 | 77.040.20 77.140.80 | TC 17/SC 11 |
| ISO 4992-2:2006 Steel castings -- Ultrasonic examination -- Part 2: Steel castings for highly stressed components | 90.60 | 77.040.20 77.140.80 | TC 17/SC 11 |
| ISO 4993:2009 Steel and iron castings -- Radiographic inspection | 60.60 | 77.040.20 77.140.80 | TC 17/SC 11 |
| ISO 4995:2008 Hot-rolled steel sheet of structural quality | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 4996:2007 Hot-rolled steel sheet of high yield stress structural quality | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 4997:2007 Cold-reduced carbon steel sheet of structural quality | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 4998:2005 Continuous hot-dip zinc-coated carbon steel sheet of structural quality | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 4999:2005 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 5000:2005 Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 5001:2007 Cold-reduced carbon steel sheet for vitreous enamelling | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 5002:2008 Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 5003:1980 Flat bottom railway rails and special rail sections for switches and crossings of non-treated steel -- Technical delivery requirements | 90.93 | 45.080 | TC 17/SC 15 |
| ISO 5948:1994 Railway rolling stock material -- Ultrasonic acceptance testing | 90.20 | 45.060.01 77.040.20 | TC 17 |
| ISO 5949:1983 Tool steels and bearing steels -- Micrographic method for assessing the distribution of carbides using reference photomicrographs | 90.20 | 77.140.20 77.140.10 77.140.35 77.040.99 | TC 17/SC 7 |
| ISO 5950:2008 Continuous electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 5951:2008 Hot-rolled steel sheet of higher yield strength with improved formability | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 5952:2005 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 5954:2007 Cold-reduced carbon steel sheet according to hardness requirements | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 6303:1981 Pressure vessel steels not included in ISO 2604, Parts 1 to 6 -- Derivation of long-time stress rupture properties | 90.93 | 77.140.30 | TC 17 |
| ISO 6305-2:2007 Railway components -- Technical delivery requirements -- Part 2: Non-alloy carbon steel baseplates | 60.60 | 45.080 | TC 17/SC 15 |
| ISO 6305-3:1983 Railway components -- Technical delivery requirements -- Part 3: Steel sleepers | 90.93 | 45.080 | TC 17/SC 15 |
| ISO 6305-4:1985 Railway components -- Technical delivery requirements -- Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings | 90.93 | 45.080 | TC 17/SC 15 |
| ISO/TR 6306:1989 Chemical analysis of steel -- Order of listing elements | 60.60 | 77.080.20 | TC 17/SC 20 |
| ISO 6316:2008 Hot-rolled steel strip of structural quality | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 6317:2008 Hot-rolled carbon steel strip of commercial and drawing qualities | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 6758:1980 Welded steel tubes for heat exchangers | 90.20 | 77.140.75 27.060.30 | TC 17/SC 19 |
| ISO 6759:1980 Seamless steel tubes for heat exchangers | 90.20 | 77.140.75 27.060.30 | TC 17/SC 19 |
| ISO 6929:1987 Steel products -- Definitions and classification | 90.92 | 01.040.77 77.140.01 | TC 17 |
| ISO 6930-1:2001 High yield strength steel plates and wide flats for cold forming -- Part 1: Delivery conditions for thermomechanically-rolled steels | 90.93 | 77.140.50 | TC 17/SC 3 |
| ISO 6930-2:2004 High yield strength steel plates and wide flats for cold forming -- Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels | 90.93 | 77.140.50 | TC 17/SC 3 |
| ISO 6931-1:1994 Stainless steels for springs -- Part 1: Wire | 90.20 | 77.140.25 | TC 17/SC 4 |
| ISO 6931-2:2005 Stainless steels for springs -- Part 2: Narrow strip | 90.93 | 77.140.25 | TC 17/SC 4 |
| ISO 6932:2008 Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 6933:1986 Railway rolling stock material -- Magnetic particle acceptance testing | 90.93 | 77.040.20 45.060.01 | TC 17 |
| ISO 6934-1:1991 Steel for the prestressing of concrete -- Part 1: General requirements | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 6934-2:1991 Steel for the prestressing of concrete -- Part 2: Cold-drawn wire | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 6934-3:1991 Steel for the prestressing of concrete -- Part 3: Quenched and tempered wire | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 6934-4:1991 Steel for the prestressing of concrete -- Part 4: Strand | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 6934-4:1991/Cor 1:1992 | 60.60 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 6934-4:1991/Cor 2:2000 | 60.60 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 6934-5:1991 Steel for the prestressing of concrete -- Part 5: Hot-rolled steel bars with or without subsequent processing | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 6935-1:2007 Steel for the reinforcement of concrete -- Part 1: Plain bars | 60.60 | 77.140.15 91.080.40 | TC 17/SC 16 |
| ISO 6935-2:2007 Steel for the reinforcement of concrete -- Part 2: Ribbed bars | 60.60 | 77.140.15 91.080.40 | TC 17/SC 16 |
| ISO 6935-3:1992 Steel for the reinforcement of concrete -- Part 3: Welded fabric | 90.93 | 77.140.15 91.080.40 | TC 17/SC 16 |
| ISO 6935-3:1992/Cor 1:2000 | 60.60 | 77.140.15 91.080.40 | TC 17/SC 16 |
| ISO 7452:2002 Hot-rolled structural steel plates -- Tolerances on dimensions and shape | 90.92 | 77.140.70 77.140.50 | TC 17/SC 3 |
| ISO/TR 7468:1981 Summary of average stress rupture properties of wrought steels for boilers and pressure vessels | 60.60 | 77.140.30 | TC 17 |
| ISO/TR 7705:1991 Guidelines for specifying Charpy V-notch impact prescriptions in steel specifications | 90.93 | 77.080.20 | TC 17 |
| ISO 7778:1983 Steel plate with specified through-thickness characteristics | 90.93 | 77.140.50 | TC 17/SC 3 |
| ISO 7788:1985 Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements | 90.93 | 77.140.50 | TC 17/SC 3 |
| ISO 7900:2006 Steel wire and wire products for fences -- Zinc- and zinc-alloy-coated steel barbed wire | 90.60 | 77.140.65 91.090 | TC 17/SC 17 |
| ISO 7989-1:2006 Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 1: General principles | 90.60 | 25.220.40 77.140.65 | TC 17/SC 17 |
| ISO 7989-2:2007 Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 2: Zinc or zinc-alloy coating | 60.60 | 25.220.40 77.140.65 | TC 17/SC 17 |
| ISO 8458-1:2002 Steel wire for mechanical springs -- Part 1: General requirements | 90.93 | 77.140.25 | TC 17/SC 17 |
| ISO 8458-2:2002 Steel wire for mechanical springs -- Part 2: Patented cold-drawn non-alloy steel wire | 90.93 | 77.140.25 | TC 17/SC 17 |
| ISO 8458-3:2002 Steel wire for mechanical springs -- Part 3: Oil-hardened and tempered wire | 90.93 | 77.140.25 | TC 17/SC 17 |
| ISO 9034:1987 Hot-rolled structural steel wide flats -- Tolerances on dimensions and shape | 90.60 | 77.140.50 | TC 17/SC 3 |
| ISO 9042:1988 Steels -- Manual point counting method for statistically estimating the volume fraction of a constituent with a point grid | 90.20 | 77.040.99 | TC 17/SC 7 |
| ISO 9302:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Electromagnetic testing for verification of hydraulic leak-tightness | 90.92 | 77.040.20 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9303:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of longitudinal imperfections | 90.92 | 77.040.20 23.040.10 77.140.75 | TC 17/SC 19 |
| ISO 9304:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Eddy current testing for the detection of imperfections | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO 9305:1989 Seamless steel tubes for pressure purposes -- Full peripheral ultrasonic testing for the detection of transverse imperfections | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO 9327-1:1999 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 1: General requirements | 90.93 | 77.140.85 77.140.30 | TC 17/SC 10 |
| ISO 9327-2:1999 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties | 90.93 | 77.140.85 77.140.30 | TC 17/SC 10 |
| ISO 9327-3:1999 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 3: Nickel steels with specified low temperature properties | 90.93 | 77.140.85 77.140.30 | TC 17/SC 10 |
| ISO 9327-4:1999 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 4: Weldable fine grain steels with high proof strength | 90.93 | 77.140.85 77.140.30 | TC 17/SC 10 |
| ISO 9327-5:1999 Steel forgings and rolled or forged bars for pressure purposes -- Technical delivery conditions -- Part 5: Stainless steels | 90.93 | 77.140.85 77.140.30 | TC 17/SC 10 |
| ISO 9328-1:2003 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 1: General requirements | 90.92 | 77.140.50 77.140.30 | TC 17/SC 10 |
| ISO 9328-2:2004 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 2: Non-alloy and alloy steels with specified elevated temperature properties | 90.92 | 77.140.50 77.140.30 | TC 17/SC 10 |
| ISO 9328-3:2004 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 3: Weldable fine grain steels, normalized | 90.93 | 77.140.50 77.140.30 | TC 17/SC 10 |
| ISO 9328-4:2004 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties | 90.93 | 77.140.50 77.140.30 | TC 17/SC 10 |
| ISO 9328-5:2004 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 5: Weldable fine grain steels, thermomechanically rolled | 90.93 | 77.140.50 77.140.30 | TC 17/SC 10 |
| ISO 9328-6:2004 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 6: Weldable fine grain steels, quenched and tempered | 90.93 | 77.140.50 77.140.30 | TC 17/SC 10 |
| ISO 9328-7:2004 Steel flat products for pressure purposes -- Technical delivery conditions -- Part 7: Stainless steels | 90.92 | 77.140.50 77.140.30 | TC 17/SC 10 |
| ISO 9329-1:1989 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steels with specified room temperature properties | 90.60 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9329-2:1997 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Unalloyed and alloyed steels with specified elevated temperature properties | 90.60 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9329-3:1997 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Unalloyed and alloyed steels with specified low temperature properties | 90.60 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9329-4:1997 Seamless steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Austenitic stainless steels | 90.60 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9330-1:1990 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 1: Unalloyed steel tubes with specified room temperature properties | 90.93 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9330-2:1997 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 2: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified elevated temperature properties | 90.60 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9330-3:1997 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 3: Electric resistance and induction welded unalloyed and alloyed steel tubes with specified low temperature properties | 90.60 | 23.040.10 77.140.75 | TC 17/SC 19 |
| ISO 9330-4:2000 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 4: Submerged arc-welded unalloyed and alloyed steel tubes with specified elevated temperature properties | 90.93 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9330-5:2000 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 5: Submerged arc-welded unalloyed and alloyed steel tubes with specified low temperature properties | 90.93 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9330-6:1997 Welded steel tubes for pressure purposes -- Technical delivery conditions -- Part 6: Longitudinally welded austenitic stainless steel tubes | 90.60 | 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO 9364:2006 Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities | 90.60 | 77.140.50 | TC 17/SC 12 |
| ISO 9402:1989 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of longitudinal imperfections | 90.92 | 77.140.75 77.040.20 23.040.10 | TC 17/SC 19 |
| ISO 9441:1988 Steel -- Determination of niobium content -- PAR spectrophotometric method | 90.20 | 77.080.20 | TC 17/SC 1 |
| ISO 9442:1988 Steel -- Hot-rolled ribbed and grooved flats for spring leaves -- Tolerances and dimensions | 90.20 | 77.140.25 | TC 17/SC 4 |
| ISO 9443:1991 Heat-treatable and alloy steels -- Surface quality classes for hot-rolled round bars and wire rods -- Technical delivery conditions | 90.93 | 77.140.20 77.140.60 77.140.10 | TC 17/SC 4 |
| ISO 9444-1:2009 Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths | 60.60 | 77.140.50 77.140.20 | TC 17/SC 4 |
| ISO 9444-2:2009 Continuously hot-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and sheet/plate | 60.60 | 77.140.50 77.140.20 | TC 17/SC 4 |
| ISO 9445-1:2009 Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 1: Narrow strip and cut lengths | 60.60 | 77.140.20 77.140.50 | TC 17/SC 4 |
| ISO 9445-2:2009 Continuously cold-rolled stainless steel -- Tolerances on dimensions and form -- Part 2: Wide strip and plate/sheet | 60.60 | 77.140.20 77.140.50 | TC 17/SC 4 |
| ISO 9477:1992 High strength cast steels for general engineering and structural purposes | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 9556:1989 Steel and iron -- Determination of total carbon content -- Infrared absorption method after combustion in an induction furnace | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 9598:1989 Seamless steel tubes for pressure purposes -- Full peripheral magnetic transducer/flux leakage testing of ferromagnetic steel tubes for the detection of transverse imperfections | 90.92 | 77.140.75 77.040.20 23.040.10 | TC 17/SC 19 |
| ISO 9647:1989 Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 9658:1990 Steel -- Determination of aluminium content -- Flame atomic absorption spectrometric method | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 9764:1989 Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections | 90.92 | 25.160.40 23.040.10 77.140.75 | TC 17/SC 19 |
| ISO 9765:1990 Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections | 90.92 | 23.040.10 77.140.75 25.160.40 | TC 17/SC 19 |
| ISO/TR 9769:1991 Steel and iron -- Review of available methods of analysis | 60.60 | 77.080.01 | TC 17/SC 1 |
| ISO/TR 10108:1989 Steel -- Conversion of hardness values to tensile strength values | 60.60 | 77.040.10 | TC 17/SC 20 |
| ISO 10124:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections | 90.92 | 23.040.10 77.040.20 77.140.75 | TC 17/SC 19 |
| ISO 10138:1991 Steel and iron -- Determination of chromium content -- Flame atomic absorption spectrometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 10144:1991 Certification scheme for steel bars and wires for the reinforcement of concrete structures | 90.93 | 77.140.15 91.080.40 | TC 17/SC 16 |
| ISO 10153:1997 Steel -- Determination of boron content -- Curcumin spectrophotometric method | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 10278:1995 Steel -- Determination of manganese content -- Inductively coupled plasma atomic emission spectrometric method | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 10280:1991 Steel and iron -- Determination of titanium content -- Diantipyrylmethane spectrometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 10332:1994 Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes -- Ultrasonic testing for the verification of hydraulic leak-tightness | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO 10384:2008 Hot-rolled carbon steel sheet as defined by chemical composition | 60.60 | 77.140.50 | TC 17/SC 12 |
| ISO 10474:1991 Steel and steel products -- Inspection documents | 90.92 | 77.140.01 | TC 17/SC 20 |
| ISO 10543:1993 Seamless and hot-stretch-reduced welded steel tubes for pressure purposes -- Full peripheral ultrasonic thickness testing | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO 10544:1992 Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 10697-1:1992 Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 1: Determination of acid-soluble calcium content | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 10697-2:1994 Steel -- Determination of calcium content by flame atomic absorption spectrometry -- Part 2: Determination of total calcium content | 90.20 | 77.080.20 | TC 17/SC 1 |
| ISO 10698:1994 Steel -- Determination of antimony content -- Electrothermal atomic absorption spectrometric method | 90.20 | 77.080.20 | TC 17/SC 1 |
| ISO 10700:1994 Steel and iron -- Determination of manganese content -- Flame atomic absorption spectrometric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 10701:1994 Steel and iron -- Determination of sulfur content -- Methylene blue spectrophotometric method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 10702:1993 Steel and iron -- Determination of nitrogen content -- Titrimetric method after distillation | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 10714:1992 Steel and iron -- Determination of phosphorus content -- Phosphovanadomolybdate spectrophotometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO/TR 10719:1994 Steel and iron -- Determination of non-combined carbon content -- Infrared absorption method after combustion in an induction furnace | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 10720:1997 Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 11082:1992 Certification scheme for welded fabric for the reinforcement of concrete structures | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 11484:2009 Steel products -- Employer's qualification system for non-destructive testing (NDT) personnel | 60.60 | 77.040.20 03.100.30 | TC 17/SC 19 |
| ISO 11496:1993 Seamless and welded steel tubes for pressure purposes -- Ultrasonic testing of tube ends for the detection of laminar imperfections | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO/TR 11637:1997 Boron treated engineering steels for quenching and tempering | 90.93 | 77.140.10 | TC 17/SC 4 |
| ISO 11652:1997 Steel and iron -- Determination of cobalt content -- Flame atomic absorption spectrometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 11653:1997 Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 11692:1994 Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures | 90.60 | 77.140.10 77.140.20 | TC 17/SC 4 |
| ISO 11949:1995 Cold-reduced electrolytic tinplate | 90.93 | 77.140.50 | TC 17 |
| ISO 11950:1995 Cold-reduced electrolytic chromium/chromium oxide-coated steel | 90.93 | 77.140.50 | TC 17 |
| ISO 11951:1995 Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel | 90.93 | 77.140.50 | TC 17 |
| ISO 11970:2001 Specification and approval of welding procedures for production welding of steel castings | 90.60 | 77.140.80 25.160.10 | TC 17/SC 11 |
| ISO 11971:2008 Steel and iron castings -- Visual examination of surface quality | 60.60 | 77.040.20 77.140.80 | TC 17/SC 11 |
| ISO 11972:1998 Corrosion-resistant cast steels for general applications | 90.60 | 77.140.20 77.140.80 | TC 17/SC 11 |
| ISO 11973:1999 Heat-resistant cast steels and alloys for general applications | 90.60 | 77.140.20 77.140.80 | TC 17/SC 11 |
| ISO 12094:1994 Welded steel tubes for pressure purposes -- Ultrasonic testing for the detection of laminar imperfections in strips/plates used in the manufacture of welded tubes | 90.92 | 23.040.10 77.040.20 | TC 17/SC 19 |
| ISO 12095:1994 Seamless and welded steel tubes for pressure purposes -- Liquid penetrant testing | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO 12096:1996 Submerged arc-welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections | 90.92 | 25.160.40 77.140.75 23.040.10 | TC 17/SC 19 |
| ISO/TR 12662:1997 Certification scheme for prestressing steels | 60.60 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 13520:2002 Determination of ferrite content in austenitic stainless steel castings | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 13521:1999 Austenitic manganese steel castings | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 13583-1:2000 Centrifugally cast steel and alloy products -- Part 1: General testing and tolerances | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 13583-2:2003 Centrifugally cast steel and alloy products -- Part 2: Heat resistant materials | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 13663:1995 Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections | 90.92 | 25.160.40 23.040.10 77.140.75 | TC 17/SC 19 |
| ISO 13664:1997 Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube ends for the detection of laminar imperfections | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO 13665:1997 Seamless and welded steel tubes for pressure purposes -- Magnetic particle inspection of the tube body for the detection of surface imperfections | 90.92 | 23.040.10 77.140.75 77.040.20 | TC 17/SC 19 |
| ISO 13887:2004 Cold-reduced steel sheet of higher yield strength with improved formability | 90.60 | 77.140.50 | TC 17/SC 12 |
| ISO 13898-1:1997 Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 13898-2:1997 Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 13898-3:1997 Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of copper content | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 13898-4:1997 Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO/TS 13899-1:2004 Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: Determination of Mo content | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 13899-2:2005 Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of Nb content | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO/TS 13899-3:2005 Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 3: Determination of W content | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 13900:1997 Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 13902:1997 Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 13976:2005 Hot-rolled steel sheet in coils of structural quality and heavy thickness | 90.60 | 77.140.50 | TC 17/SC 12 |
| ISO 14250:2000 Steel -- Metallographic characterization of duplex grain size and distributions | 90.93 | 77.080.20 | TC 17/SC 7 |
| ISO 14284:1996 Steel and iron -- Sampling and preparation of samples for the determination of chemical composition | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 14590:2005 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability | 90.60 | 77.140.50 | TC 17/SC 12 |
| ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 14655:1999 Epoxy-coated strand for the prestressing of concrete | 90.93 | 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete | 90.93 | 25.220.99 91.080.40 77.140.15 | TC 17/SC 16 |
| ISO 14657:2005 Zinc-coated steel for the reinforcement of concrete | 90.93 | 77.140.99 91.080.40 | TC 17/SC 16 |
| ISO 14737:2003 Cast non-alloy and low alloy steels for general applications | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 14788:2005 Continuous hot-dip zinc-5 % aluminium alloy coated steel sheet | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO/TR 15349-1:1998 Unalloyed steel -- Determination of low carbon content -- Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 15349-2:1999 Unalloyed steel -- Determination of low carbon content -- Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) | 90.20 | 77.080.20 | TC 17/SC 1 |
| ISO/TR 15349-3:1998 Unalloyed steel -- Determination of low carbon content -- Part 3: Infrared absorption method after combustion in an electric resistance furnace (with preheating) | 90.93 | 77.080.20 | TC 17/SC 1 |
| ISO 15350:2000 Steel and iron -- Determination of total carbon and sulfur content -- Infrared absorption method after combustion in an induction furnace (routine method) | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 15351:1999 Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas (Routine method) | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO 15353:2001 Steel and iron -- Determination of tin content -- Flame atomic absorption spectrometric method (extraction as Sn-SCN) | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 15355:1999 Steel and iron -- Determination of chromium content -- Indirect titration method | 90.20 | 77.080.01 | TC 17/SC 1 |
| ISO/TR 15461:1997 Steel forgings -- Testing frequency, sampling conditions and test methods for mechanical tests | 60.60 | 77.140.85 77.040.10 | TC 17/SC 10 |
| ISO/TS 15510:2003 Stainless steels -- Chemical composition | 90.92 | 77.140.20 | TC 17/SC 4 |
| ISO 15630-1:2002 Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire | 90.92 | 77.140.15 | TC 17/SC 16 |
| ISO 15630-2:2002 Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric | 90.92 | 77.140.15 | TC 17/SC 16 |
| ISO 15630-3:2002 Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel | 90.92 | 77.140.15 | TC 17/SC 16 |
| ISO 15835-1:2009 Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements | 60.60 | 77.140.15 | TC 17/SC 16 |
| ISO 15835-2:2009 Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods | 60.60 | 77.140.15 | TC 17/SC 16 |
| ISO 16020:2005 Steel for the reinforcement and prestressing of concrete -- Vocabulary | 90.93 | 01.040.77 77.140.15 | TC 17/SC 16 |
| ISO 16120-1:2001 Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements | 90.92 | 77.140.60 | TC 17/SC 17 |
| ISO 16120-2:2001 Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod | 90.92 | 77.140.60 | TC 17/SC 17 |
| ISO 16120-3:2001 Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod | 90.92 | 77.140.60 | TC 17/SC 17 |
| ISO 16120-4:2001 Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications | 90.92 | 77.140.60 | TC 17/SC 17 |
| ISO 16124:2004 Steel wire rod -- Dimensions and tolerances | 90.93 | 77.140.65 | TC 17/SC 17 |
| ISO 16143-1:2004 Stainless steels for general purposes -- Part 1: Flat products | 90.93 | 77.140.20 | TC 17/SC 4 |
| ISO 16143-2:2004 Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections | 90.93 | 77.140.20 | TC 17/SC 4 |
| ISO 16143-3:2005 Stainless steels for general purposes -- Part 3: Wire | 90.93 | 77.140.65 77.140.20 | TC 17/SC 4 |
| ISO 16160:2005 Continuously hot-rolled steel sheet products -- Dimensional and shape tolerances | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 16162:2005 Continuously cold-rolled steel sheet products -- Dimensional and shape tolerances | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 16163:2005 Continuously hot-dipped coated steel sheet products -- Dimensional and shape tolerances | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 16172:2006 Continuous hot-dip metallic-coated steel sheet for corrugated steel pipe | 90.60 | 77.140.50 | TC 17/SC 12 |
| ISO 16468:2005 Investment castings (steel, nickel alloys and cobalt alloys) -- General technical requirements | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 16650:2004 Bead wire | 90.93 | 77.140.65 | TC 17/SC 17 |
| ISO 16918-1:2009 Steel and iron -- Determination of nine elements by the inductively coupled plasma mass spectrometric method -- Part 1: Determination of tin, antimony, cerium, lead and bismuth | 60.60 | 77.080.01 | TC 17/SC 1 |
| ISO 17053:2005 Steel and iron -- Determination of oxygen -- Infrared method after fusion under inert gas | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO/TR 17055:2002 Steel -- Determination of silicon content -- Inductively coupled plasma atomic emission spectrometric method | 60.60 | 77.080.20 | TC 17/SC 1 |
| ISO 17058:2004 Steel and iron -- Determination of arsenic content -- Spectrophotometric method | 90.93 | 77.080.01 | TC 17/SC 1 |
| ISO 17577:2006 Steel -- Ultrasonic testing for steel flat products of thickness equal to or greater than 6 mm | 90.20 | 77.140.50 77.040.20 | TC 17/SC 7 |
| ISO 17832:2009 Non-parallel steel wire and cords for tyre reinforcement | 60.60 | 83.160.01 77.140.65 | TC 17/SC 17 |
| ISO 17925:2004 Zinc and/or aluminium based coatings on steel -- Determination of coating mass per unit area and chemical composition -- Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry | 90.93 | 77.080.20 25.220.40 | TC 17/SC 1 |
| ISO 18286:2008 Hot-rolled stainless steel plates -- Tolerances on dimensions and shape | 60.60 | 77.140.50 | TC 17/SC 4 |
| ISO 19959:2005 Visual examination of the surface condition of investment castings -- Steel, nickel alloys and cobalt alloys | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 19960:2005 Cast steels and alloys with special physical properties | 90.60 | 77.140.80 | TC 17/SC 11 |
| ISO 20723:2004 Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements | 90.93 | 77.140.70 77.140.60 | TC 17/SC 3 |
| ISO 20805:2005 Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming | 90.92 | 77.140.50 | TC 17/SC 12 |
| ISO 22034-1:2007 Steel wire and wire products -- Part 1: General test methods | 60.60 | 77.140.65 | TC 17/SC 17 |
| ISO 22034-2:2007 Steel wire and wire products -- Part 2: Tolerances on wire dimensions | 60.60 | 77.140.65 | TC 17/SC 17 |
| ISO 23717:2006 Steel wire and wire products -- Hose reinforcement wire | 90.60 | 77.140.65 | TC 17/SC 17 |
| ISO 24314:2006 Structural steels -- Structural steels for building with improved seismic resistance -- Technical delivery conditions | 90.20 | 77.140.70 91.120.25 | TC 17/SC 3 |
News feeds
