TC 10 - Technical product documentation

Items to be displayed:

Standards and projects under the direct responsibility of TC 10 Secretariat and its SCs

Standard and/or project		ICS	TC
2ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and index	90.93	01.100.01	TC 10/SC 1
3ISO 128-20:1996 Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lines	90.93	01.100.01	TC 10/SC 1
4ISO 128-21:1997 Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems	90.60	01.100.01 35.240.10	TC 10/SC 1
5ISO 128-22:1999 Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for leader lines and reference lines	90.20	01.100.01	TC 10/SC 1
6ISO 128-23:1999 Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawings	90.20	01.100.30	TC 10/SC 8
7ISO 128-24:1999 Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering drawings	90.93	01.100.20	TC 10/SC 6
9ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawings	90.93	47.020.01 01.100.20	TC 10/SC 6
10ISO 128-30:2001 Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views	90.93	01.100.01	TC 10/SC 1
11ISO 128-34:2001 Technical drawings -- General principles of presentation -- Part 34: Views on mechanical engineering drawings	90.20	01.100.20	TC 10/SC 6
12ISO 128-40:2001 Technical drawings -- General principles of presentation -- Part 40: Basic conventions for cuts and sections	90.93	01.100.01	TC 10/SC 1
13ISO 128-44:2001 Technical drawings -- General principles of presentation -- Part 44: Sections on mechanical engineering drawings	90.93	01.100.20	TC 10/SC 6
14ISO 128-50:2001 Technical drawings -- General principles of presentation -- Part 50: Basic conventions for representing areas on cuts and sections	90.93	01.100.01	TC 10/SC 1
18ISO 129-1:2004 Technical drawings -- Indication of dimensions and tolerances -- Part 1: General principles	90.92	01.100.01	TC 10/SC 1
31ISO 2162-1:1993 Technical product documentation -- Springs -- Part 1: Simplified representation	90.93	21.160 01.100.20	TC 10/SC 6
32ISO 2203:1973 Technical drawings -- Conventional representation of gears	90.93	21.200 01.100.20	TC 10/SC 6
33ISO 2594:1972 Building drawings -- Projection methods	90.93	01.100.30	TC 10/SC 8
36ISO 3098-0:1997 Technical product documentation -- Lettering -- Part 0: General requirements	90.93	01.100.01	TC 10/SC 1
39ISO 3098-2:2000 Technical product documentation -- Lettering -- Part 2: Latin alphabet, numerals and marks	90.93	01.100.01	TC 10/SC 1
41ISO 3098-3:2000 Technical product documentation -- Lettering -- Part 3: Greek alphabet	90.93	01.100.01	TC 10/SC 1
43ISO 3098-4:2000 Technical product documentation -- Lettering -- Part 4: Diacritical and particular marks for the Latin alphabet	90.93	01.100.01	TC 10/SC 1
44ISO 3098-5:1997 Technical product documentation -- Lettering -- Part 5: CAD lettering of the Latin alphabet, numerals and marks	90.60	35.240.10 01.100.01	TC 10/SC 1
45ISO 3098-6:2000 Technical product documentation -- Lettering -- Part 6: Cyrillic alphabet	90.93	01.100.01	TC 10/SC 1
46ISO 3511-1:1977 Process measurement control functions and instrumentation -- Symbolic representation -- Part 1: Basic requirements	90.60	25.040.40 01.080.30	TC 10/SC 10
47ISO 3511-2:1984 Process measurement control functions and instrumentation -- Symbolic representation -- Part 2: Extension of basic requirements	90.60	01.080.30 25.040.40	TC 10/SC 10
48ISO 3511-3:1984 Process measurement control functions and instrumentation -- Symbolic representation -- Part 3: Detailed symbols for instrument interconnection diagrams	90.60	01.080.30 25.040.40	TC 10/SC 10
49ISO 3511-4:1985 Industrial process measurement control functions and instrumentation -- Symbolic representation -- Part 4: Basic symbols for process computer, interface, and shared display/control functions	90.60	01.080.30 25.040.40	TC 10/SC 10
52ISO 3766:2003 Construction drawings -- Simplified representation of concrete reinforcement	90.60	01.100.30	TC 10/SC 8
53ISO 3952-1:1981 Kinematic diagrams -- Graphical symbols	90.93	21.020 01.080.30	TC 10/SC 6
54ISO 3952-1:1981/Amd 1:2002	60.60	21.020 01.080.30	TC 10/SC 6
55ISO 3952-2:1981 Kinematic diagrams -- Graphical symbols	90.93	21.020 01.080.30	TC 10/SC 6
56ISO 3952-3:1979 Kinematic diagrams -- Graphical symbols	90.93	21.020 01.080.30	TC 10/SC 6
57ISO 3952-4:1984 Kinematic diagrams -- Graphical symbols	90.93	01.080.30 21.020	TC 10/SC 6
61ISO 4067-2:1980 Building and civil engineering drawings -- Installations -- Part 2: Simplified representation of sanitary appliances	90.93	01.080.30 01.100.30	TC 10/SC 8
66ISO 4157-1:1998 Construction drawings -- Designation systems -- Part 1: Buildings and parts of buildings	90.60	01.100.30	TC 10/SC 8
67ISO 4157-2:1998 Construction drawings -- Designation systems -- Part 2: Room names and numbers	90.60	01.100.30	TC 10/SC 8
69ISO 4157-3:1998 Construction drawings -- Designation systems -- Part 3: Room identifiers	90.60	01.100.30	TC 10/SC 8
70ISO 4172:1991 Technical drawings -- Construction drawings -- Drawings for the assembly of prefabricated structures	90.93	01.100.30	TC 10/SC 8
73ISO 5261:1995 Technical drawings -- Simplified representation of bars and profile sections	90.93	01.100.20	TC 10/SC 1
74ISO 5455:1979 Technical drawings -- Scales	90.20	01.100.01	TC 10/SC 1
75ISO 5456-1:1996 Technical drawings -- Projection methods -- Part 1: Synopsis	90.93	01.100.01	TC 10/SC 1
76ISO 5456-2:1996 Technical drawings -- Projection methods -- Part 2: Orthographic representations	90.93	01.100.01	TC 10/SC 1
77ISO 5456-3:1996 Technical drawings -- Projection methods -- Part 3: Axonometric representations	90.93	01.100.01	TC 10/SC 1
78ISO 5456-4:1996 Technical drawings -- Projection methods -- Part 4: Central projection	90.93	01.100.01	TC 10/SC 1
80ISO 5457:1999 Technical product documentation -- Sizes and layout of drawing sheets	90.60	01.100.01	TC 10/SC 1
83ISO 5845-1:1995 Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 1: General principles	90.60	21.060.01 01.100.20	TC 10/SC 6
84ISO 5845-2:1995 Technical drawings -- Simplified representation of the assembly of parts with fasteners -- Part 2: Rivets for aerospace equipment	90.60	01.100.20 49.030.60	TC 10/SC 6
86ISO 6284:1996 Construction drawings -- Indication of limit deviations	90.93	01.100.30	TC 10/SC 8
88ISO 6410-1:1993 Technical drawings -- Screw threads and threaded parts -- Part 1: General conventions	90.93	21.040.01 01.100.20	TC 10/SC 6
89ISO 6410-2:1993 Technical drawings -- Screw threads and threaded parts -- Part 2: Screw thread inserts	90.93	21.040.01 01.100.20	TC 10/SC 6
90ISO 6410-3:1993 Technical drawings -- Screw threads and threaded parts -- Part 3: Simplified representation	90.93	21.040.01 01.100.20	TC 10/SC 6
91ISO 6411:1982 Technical drawings -- Simplified representation of centre holes	90.93	01.100.20	TC 10/SC 6
92ISO 6412-1:1989 Technical drawings -- Simplified representation of pipelines -- Part 1: General rules and orthogonal representation	90.20	23.040.01 01.100.99	TC 10/SC 10
93ISO 6412-2:1989 Technical drawings -- Simplified representation of pipelines -- Part 2: Isometric projection	90.20	01.100.99 23.040.01	TC 10/SC 10
94ISO 6412-3:1993 Technical drawings -- Simplified representation of pipelines -- Part 3: Terminal features of ventilation and drainage systems	90.60	23.040.01 01.100.99	TC 10/SC 10
95ISO 6413:1988 Technical drawings -- Representation of splines and serrations	90.93	21.120.30 01.100.20	TC 10/SC 6
96ISO 6414:1982 Technical drawings for glassware	90.93	01.100.99	TC 10/SC 6
97ISO 6428:1982 Technical drawings -- Requirements for microcopying	90.93	37.080 01.100.01	TC 10/SC 1
99ISO 6433:1981 Technical drawings -- Item references	90.92	01.100.01	TC 10/SC 1
100ISO 7083:1983 Technical drawings -- Symbols for geometrical tolerancing -- Proportions and dimensions	90.60	01.100.20	TC 10/SC 10
103ISO 7200:2004 Technical product documentation -- Data fields in title blocks and document headers	90.60	01.110	TC 10/SC 1
104ISO 7437:1990 Technical drawings -- Construction drawings -- General rules for execution of production drawings for prefabricated structural components	90.93	01.100.30	TC 10/SC 8
105ISO 7518:1983 Technical drawings -- Construction drawings -- Simplified representation of demolition and rebuilding	90.60	01.100.30	TC 10/SC 8
106ISO 7519:1991 Technical drawings -- Construction drawings -- General principles of presentation for general arrangement and assembly drawings	90.93	01.100.30	TC 10/SC 8
108ISO 7573:2008 Technical product documentation -- Parts lists	60.60	01.110	TC 10/SC 1
109ISO 8048:1984 Technical drawings -- Construction drawings -- Representation of views, sections and cuts	90.92	01.100.30	TC 10/SC 8
111ISO 8560:1986 Technical drawings -- Construction drawings -- Representation of modular sizes, lines and grids	90.93	01.100.30	TC 10/SC 8
112ISO 8826-1:1989 Technical drawings -- Rolling bearings -- Part 1: General simplified representation	90.93	01.100.20 21.100.20	TC 10/SC 6
113ISO 8826-2:1994 Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation	90.93	21.100.20 01.100.20	TC 10/SC 6
114ISO 9175-1:1988 Tubular tips for hand-held technical pens using India ink on tracing paper -- Part 1: Definitions, dimensions, designation and marking	90.20	01.100.40	TC 10
117ISO 9177-1:1989 Mechanical pencils -- Part 1: Classification, dimensions, performance requirements and testing	90.20	01.100.40 97.180	TC 10
118ISO 9177-2:1989 Mechanical pencils -- Part 2: Black leads -- Classification and dimensions	90.20	97.180 01.100.40	TC 10
119ISO 9177-3:1994 Mechanical pencils -- Part 3: Black leads -- Bending strengths of HB leads	90.20	97.180 01.100.40	TC 10
124ISO 9180:1988 Black leads for wood-cased pencils -- Classification and diameters	90.20	01.100.40	TC 10
125ISO 9222-1:1989 Technical drawings -- Seals for dynamic application -- Part 1: General simplified representation	90.93	01.100.20 21.140	TC 10/SC 6
126ISO 9222-2:1989 Technical drawings -- Seals for dynamic application -- Part 2: Detailed simplified representation	90.93	01.100.20 21.140	TC 10/SC 6
127ISO 9431:1990 Construction drawings -- Spaces for drawing and for text, and title blocks on drawing sheets	90.93	01.100.30	TC 10/SC 8
128ISO 9957-1:1992 Fluid draughting media -- Part 1: Water-based India ink -- Requirements and test conditions	90.93	01.100.40	TC 10
129ISO 9957-2:1995 Fluid draughting media -- Part 2: Water-based non-India ink -- Requirements and test conditions	90.93	01.100.40	TC 10
130ISO 9957-3:1997 Fluid draughting media -- Part 3: Water-based coloured draughting inks -- Requirements and test conditions	90.93	01.100.40	TC 10
131ISO 9958-1:1992 Draughting media for technical drawings -- Draughting film with polyester base -- Part 1: Requirements and marking	90.93	01.100.40	TC 10
132ISO 9958-2:1992 Draughting media for technical drawings -- Draughting film with polyester base -- Part 2: Determination of properties	90.93	01.100.40	TC 10
133ISO 9959-1:1992 Numerically controlled draughting machines -- Drawing test for the evaluation of performance -- Part 1: Vector plotters	90.93	01.100.40	TC 10
135ISO 9960-1:1992 Draughting instruments with or without graduation -- Part 1: Draughting scale rules	90.93	01.100.40	TC 10
138ISO 9961:1992 Draughting media for technical drawings -- Natural tracing paper	90.93	01.100.40	TC 10
139ISO 9962-1:1992 Manually operated draughting machines -- Part 1: Definitions, classification and designation	90.93	01.100.40	TC 10
140ISO 9962-2:1992 Manually operated draughting machines -- Part 2: Characteristics, performance, inspection and marking	90.93	01.100.40	TC 10
145ISO 10209-1:1992 Technical product documentation -- Vocabulary -- Part 1: Terms relating to technical drawings: general and types of drawings	90.92	01.040.01 01.100.01	TC 10/SC 1
146ISO 10209-2:1993 Technical product documentation -- Vocabulary -- Part 2: Terms relating to projection methods	90.92	01.100.01 01.040.01	TC 10/SC 1
147ISO 10209-4:1999 Technical product documentation -- Vocabulary -- Part 4: Terms relating to construction documentation	90.92	01.040.01 01.110 01.100.30	TC 10/SC 8
149ISO 10628:1997 Flow diagrams for process plants -- General rules	90.92	01.080.30	TC 10/SC 10
152ISO 11091:1994 Construction drawings -- Landscape drawing practice	90.20	01.100.30	TC 10/SC 8
153ISO 11442:2006 Technical product documentation -- Document management	90.60	35.240.10 01.110	TC 10/SC 1
159ISO 11540:1993 Caps for writing and marking instruments intended for use by children up to 14 years of age -- Safety requirements	90.93	97.190 97.180	TC 10
162ISO 12756:1998 Drawing and writing instruments -- Ball point pens and roller ball pens -- Vocabulary	90.93	01.040.01 01.100.40 97.180 01.040.97	TC 10
164ISO 12757-1:1998 Ball point pens and refills -- Part 1: General use	90.93	97.180	TC 10
165ISO 12757-2:1998 Ball point pens and refills -- Part 2: Documentary use (DOC)	90.93	01.100.40	TC 10
167ISO 13567-1:1998 Technical product documentation -- Organization and naming of layers for CAD -- Part 1: Overview and principles	90.60	01.110 35.240.10	TC 10/SC 8
168ISO 13567-2:1998 Technical product documentation -- Organization and naming of layers for CAD -- Part 2: Concepts, format and codes used in construction documentation	90.60	35.240.10 01.110	TC 10/SC 8
169ISO/TR 13567-3:1999 Technical product documentation -- Organization and naming of layers for CAD -- Part 3: Application of ISO 13567-1 and ISO 13567-2	90.93	35.240.10 01.110	TC 10/SC 8
171ISO 13715:2000 Technical drawings -- Edges of undefined shape -- Vocabulary and indications	90.60	01.040.01 01.100.20	TC 10/SC 6
174ISO 14145-1:1998 Roller ball pens and refills -- Part 1: General use	90.93	97.180	TC 10
176ISO 14145-2:1998 Roller ball pens and refills -- Part 2: Documentary use (DOC)	90.93	01.100.40	TC 10
177ISO 14617-1:2005 Graphical symbols for diagrams -- Part 1: General information and indexes	90.60	01.080.30	TC 10/SC 10
179ISO 14617-2:2002 Graphical symbols for diagrams -- Part 2: Symbols having general application	90.60	01.080.30	TC 10/SC 10
180ISO 14617-3:2002 Graphical symbols for diagrams -- Part 3: Connections and related devices	90.60	23.040.01 01.080.30	TC 10/SC 10
181ISO 14617-4:2002 Graphical symbols for diagrams -- Part 4: Actuators and related devices	90.60	01.080.30	TC 10/SC 10
182ISO 14617-5:2002 Graphical symbols for diagrams -- Part 5: Measurement and control devices	90.60	01.080.30	TC 10/SC 10
183ISO 14617-6:2002 Graphical symbols for diagrams -- Part 6: Measurement and control functions	90.60	01.080.30	TC 10/SC 10
184ISO 14617-7:2002 Graphical symbols for diagrams -- Part 7: Basic mechanical components	90.60	01.080.30	TC 10/SC 10
185ISO 14617-8:2002 Graphical symbols for diagrams -- Part 8: Valves and dampers	90.60	23.060.01 01.080.30	TC 10/SC 10
186ISO 14617-9:2002 Graphical symbols for diagrams -- Part 9: Pumps, compressors and fans	90.60	23.080 01.080.30 23.120 23.140	TC 10/SC 10
187ISO 14617-10:2002 Graphical symbols for diagrams -- Part 10: Fluid power converters	90.60	23.100.01 01.080.30	TC 10/SC 10
188ISO 14617-11:2002 Graphical symbols for diagrams -- Part 11: Devices for heat transfer and heat engines	90.60	27.010 01.080.30	TC 10/SC 10
189ISO 14617-12:2002 Graphical symbols for diagrams -- Part 12: Devices for separating, purification and mixing	90.60	01.080.30	TC 10/SC 10
190ISO 14617-13:2004 Graphical symbols for diagrams -- Part 13: Devices for material processing	90.60	01.080.30	TC 10/SC 10
191ISO 14617-14:2004 Graphical symbols for diagrams -- Part 14: Devices for transport and handling of material	90.60	01.080.30 53.040.01	TC 10/SC 10
192ISO 14617-15:2002 Graphical symbols for diagrams -- Part 15: Installation diagrams and network maps	90.60	91.140.01 01.080.30	TC 10/SC 10
193ISO 15226:1999 Technical product documentation -- Life cycle model and allocation of documents	90.20	01.110	TC 10/SC 1
195ISO 15785:2002 Technical drawings -- Symbolic presentation and indication of adhesive, fold and pressed joints	90.93	01.100.20	TC 10/SC 6
196ISO 15786:2008 Technical drawings -- Simplified representation and dimensioning of holes	60.60	01.100.20	TC 10/SC 6
197ISO 15787:2001 Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications	90.93	25.200 01.100.20	TC 10/SC 6
198ISO 16016:2000 Technical product documentation -- Protection notices for restricting the use of documents and products	90.93	01.110	TC 10/SC 1
200ISO 16792:2006 Technical product documentation -- Digital product definition data practices	90.20	01.110 35.240.10	TC 10
201ISO/TS 16952-1:2006 Technical product documentation -- Reference designation system -- Part 1: General application rules	90.93	01.110	TC 10/SC 10
202ISO/TS 16952-10:2008 Technical product documentation -- Reference designation system -- Part 10: Power plants	60.60	01.110	TC 10/SC 10
203ISO/TR 19033:2000 Technical product documentation -- Metadata for construction documentation	90.93	01.110	TC 10/SC 8
204ISO 27668-1:2009 Gel ink ball pens and refills -- Part 1: General use	60.60	97.180	TC 10
205ISO 27668-2:2009 Gel ink ball pens and refills -- Part 2: Documentary use (DOC)	60.60	01.100.40	TC 10
207IEC 81346-1:2009 Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 1: Basic rules	60.60	25.040.01	TC 10
208IEC 81346-2:2009 Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 2: Classification of objects and codes for classes	60.60	25.040.01	TC 10
210ISO 81714-1:1999 Design of graphical symbols for use in the technical documentation of products -- Part 1: Basic rules	90.92	01.080.01 01.110	TC 10/SC 10
212IEC 81714-2:2006 Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange	60.60	01.110 01.080.01	TC 10/SC 10
213IEC 81714-3:2004 Design of graphical symbols for use in the technical documentation of products -- Part 3: Classification of connect nodes, networks and their encoding	60.60	01.080.01 01.110	TC 10/SC 10
215IEC 82045-1:2001 Document management -- Part 1: Principles and methods	90.93	01.110	TC 10
216IEC 82045-2:2004 Document management -- Part 2: Metadata elements and information reference model	60.60	01.110	TC 10
217ISO 82045-5:2005 Document management -- Part 5: Application of metadata for the construction and facility management sector	90.60	01.110	TC 10/SC 8