TC 6 - Paper, board and pulps

Items to be displayed:

Standards and projects under the direct responsibility of TC 6 Secretariat and its SCs

Standard and/or project		ICS	TC
7ISO 186:2002 Paper and board -- Sampling to determine average quality	90.93	85.060	TC 6/SC 2
9ISO 187:1990 Paper, board and pulps -- Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples	90.93	85.040 85.060	TC 6/SC 2
11ISO 216:2007 Writing paper and certain classes of printed matter -- Trimmed sizes -- A and B series, and indication of machine direction	60.60	85.080.10	TC 6
13ISO 217:2008 Paper -- Untrimmed sizes -- Designation and tolerances for primary and supplementary ranges, and indication of machine direction	60.60	85.060	TC 6
18ISO 287:2009 Paper and board -- Determination of moisture content of a lot -- Oven-drying method	60.60	85.060	TC 6/SC 2
21ISO 302:2004 Pulps -- Determination of Kappa number	90.93	85.040	TC 6/SC 5
33ISO 534:2005 Paper and board -- Determination of thickness, density and specific volume	90.92	85.060	TC 6/SC 2
37ISO 535:1991 Paper and board -- Determination of water absorptiveness -- Cobb method	90.93	85.060	TC 6/SC 2
39ISO 536:1995 Paper and board -- Determination of grammage	90.93	85.060	TC 6/SC 2
44ISO 638:2008 Paper, board and pulps -- Determination of dry matter content -- Oven-drying method	60.60	85.040 85.060	TC 6
46ISO 692:1982 Pulps -- Determination of alkali solubility	90.20	85.040	TC 6
47ISO 699:1982 Pulps -- Determination of alkali resistance	90.93	85.040	TC 6/SC 5
48ISO 776:1982 Pulps -- Determination of acid-insoluble ash	90.92	85.040	TC 6/SC 5
51ISO 777:2005 Paper, board and pulp -- Determination of acid-soluble calcium	90.93	85.040 85.060	TC 6
55ISO 778:2005 Paper, board and pulp -- Determination of acid-soluble copper	90.93	85.040 85.060	TC 6
58ISO 779:2005 Paper, board and pulp -- Determination of acid-soluble iron	90.93	85.040 85.060	TC 6
60ISO 801-1:1994 Pulps -- Determination of saleable mass in lots -- Part 1: Pulp baled in sheet form	90.20	85.040	TC 6/SC 5
62ISO 801-2:1994 Pulps -- Determination of saleable mass in lots -- Part 2: Pulps (such as flash-dried pulps) baled in slabs	90.20	85.040	TC 6/SC 5
63ISO 801-3:1994 Pulps -- Determination of saleable mass in lots -- Part 3: Unitized bales	90.20	85.040	TC 6/SC 5
64ISO 838:1974 Paper -- Holes for general filing purposes -- Specifications	90.20	01.140.30 85.080.10	TC 6
66ISO 1762:2001 Paper, board and pulps -- Determination of residue (ash) on ignition at 525 degrees C	90.93	85.040	TC 6
69ISO 1830:2005 Paper, board and pulps -- Determination of acid-soluble manganese	90.93	85.040 85.060	TC 6
76ISO 1924-2:2008 Paper and board -- Determination of tensile properties -- Part 2: Constant rate of elongation method (20 mm/min)	60.60	85.060	TC 6/SC 2
77ISO 1924-3:2005 Paper and board -- Determination of tensile properties -- Part 3: Constant rate of elongation method (100 mm/min)	90.93	85.060	TC 6/SC 2
78ISO 1974:1990 Paper -- Determination of tearing resistance (Elmendorf method)	90.92	85.060	TC 6/SC 2
81ISO 2144:1997 Paper, board and pulps -- Determination of residue (ash) on ignition at 900 degrees C	90.93	85.060	TC 6
84ISO 2469:2007 Paper, board and pulps -- Measurement of diffuse radiance factor	90.92	85.040 85.060	TC 6
92ISO 2470-1:2009 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 1: Indoor daylight conditions (ISO brightness)	60.60	85.040 85.060	TC 6
93ISO 2470-2:2008 Paper, board and pulps -- Measurement of diffuse blue reflectance factor -- Part 2: Outdoor daylight conditions (D65 brightness)	60.60	85.040 85.060	TC 6
96ISO 2471:2008 Paper and board -- Determination of opacity (paper backing) -- Diffuse reflectance method	60.60	85.060	TC 6
98ISO 2493:1992 Paper and board -- Determination of resistance to bending	90.92	85.060	TC 6/SC 2
102ISO 2528:1995 Sheet materials -- Determination of water vapour transmission rate -- Gravimetric (dish) method	90.93	85.060	TC 6/SC 2
105ISO 2758:2001 Paper -- Determination of bursting strength	90.93	85.060	TC 6/SC 2
107ISO 2759:2001 Board -- Determination of bursting strength	90.93	85.060	TC 6/SC 2
109ISO 3034:1975 Corrugated fibreboard -- Determination of thickness	90.92	85.060	TC 6/SC 2
111ISO 3035:1982 Single-faced and single-wall corrugated fibreboard -- Determination of flat crush resistance	90.92	85.060	TC 6/SC 2
112ISO 3036:1975 Board -- Determination of puncture resistance	90.93	85.060	TC 6/SC 2
115ISO 3037:2007 Corrugated fibreboard -- Determination of edgewise crush resistance (unwaxed edge method)	60.60	85.060	TC 6/SC 2
116ISO 3038:1975 Corrugated fibreboard -- Determination of the water resistance of the glue bond by immersion	90.93	85.060	TC 6/SC 2
118ISO 3039:1975 Corrugated fibreboard -- Determination of the grammage of the component papers after separation	90.92	85.060	TC 6/SC 2
119ISO 3260:1982 Pulps -- Determination of chlorine consumption (Degree of delignification)	90.93	85.040	TC 6/SC 5
121ISO 3688:1999 Pulps -- Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)	90.20	85.040	TC 6/SC 5
124ISO 3689:1983 Paper and board -- Determination of bursting strength after immersion in water	90.93	85.060	TC 6/SC 2
126ISO 3781:1983 Paper and board -- Determination of tensile strength after immersion in water	90.60	85.060	TC 6/SC 2
129ISO 3783:2006 Paper and board -- Determination of resistance to picking -- Accelerated speed method using the IGT-type tester (electric model)	90.20	85.060	TC 6/SC 2
131ISO 4046-1:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 1: Alphabetical index	90.93	85.060 85.020 85.040 01.040.85	TC 6
132ISO 4046-2:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 2: Pulping terminology	90.93	85.040 01.040.85	TC 6
133ISO 4046-3:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 3: Paper-making terminology	90.93	85.020 01.040.85	TC 6
134ISO 4046-4:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 4: Paper and board grades and converted products	90.93	85.060 01.040.85	TC 6
135ISO 4046-5:2002 Paper, board, pulps and related terms -- Vocabulary -- Part 5: Properties of pulp, paper and board	90.93	85.060 85.040 01.040.85	TC 6
136ISO 4094:2005 Paper, board and pulps -- International calibration of testing apparatus -- Nomination and acceptance of standardizing and authorized laboratories	90.93	85.020 85.060 85.040	TC 6
139ISO 4119:1995 Pulps -- Determination of stock concentration	90.93	85.040	TC 6/SC 5
142ISO 5263-1:2004 Pulps -- Laboratory wet disintegration -- Part 1: Disintegration of chemical pulps	90.93	85.040	TC 6/SC 5
143ISO 5263-2:2004 Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C	90.93	85.040	TC 6/SC 5
144ISO 5263-3:2004 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at > 85 degrees C	90.93	85.040	TC 6/SC 5
145ISO 5264-1:1979 Pulps -- Laboratory beating -- Part 1: Valley beater method	90.93	85.040	TC 6/SC 5
148ISO 5264-2:2002 Pulps -- Laboratory beating -- Part 2: PFI mill method	90.92	85.040	TC 6/SC 5
150ISO 5267-1:1999 Pulps -- Determination of drainability -- Part 1: Schopper-Riegler method	90.20	85.040	TC 6/SC 5
152ISO 5267-1:1999/Cor 1:2001	60.60	85.040	TC 6/SC 5
153ISO 5267-2:2001 Pulps -- Determination of drainability -- Part 2: "Canadian Standard" freeness method	90.93	85.040	TC 6/SC 5
157ISO 5269-1:2005 Pulps -- Preparation of laboratory sheets for physical testing -- Part 1: Conventional sheet-former method	90.93	85.040	TC 6/SC 5
160ISO 5269-2:2004 Pulps -- Preparation of laboratory sheets for physical testing -- Part 2: Rapid-Köthen method	90.93	85.040	TC 6/SC 5
161ISO 5269-3:2008 Pulps -- Preparation of laboratory sheets for physical testing -- Part 3: Conventional and Rapid-Köthen sheet formers using a closed water system	60.60	85.040	TC 6/SC 5
163ISO 5270:1998 Pulps -- Laboratory sheets -- Determination of physical properties	90.60	85.040	TC 6/SC 5
166ISO 5350-1:2006 Pulps -- Estimation of dirt and shives -- Part 1: Inspection of laboratory sheets by transmitted light	90.20	85.040	TC 6/SC 5
170ISO 5350-2:2006 Pulps -- Estimation of dirt and shives -- Part 2: Inspection of mill sheeted pulp by transmitted light	90.20	85.040	TC 6/SC 5
172ISO 5350-3:2007 Pulps - Estimation of dirt and shives -- Part 3: Visual inspection by reflected light using Equivalent Black Area (EBA) method	60.60	85.040	TC 6/SC 5
174ISO 5350-4:2006 Pulps -- Estimation of dirt and shives -- Part 4: Instrumental inspection by reflected light using Equivalent Black Area (EBA) method	90.20	85.040	TC 6/SC 5
176ISO 5351:2004 Pulps -- Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution	90.92	85.040	TC 6/SC 5
179ISO 5626:1993 Paper -- Determination of folding endurance	90.93	85.060	TC 6/SC 2
182ISO 5627:1995 Paper and board -- Determination of smoothness (Bekk method)	90.93	85.060	TC 6/SC 2
183ISO 5627:1995/Cor 1:2002	60.60	85.060	TC 6/SC 2
184ISO 5628:1990 Paper and board -- Determination of bending stiffness by static methods -- General principles	90.92	85.060	TC 6/SC 2
186ISO 5629:1983 Paper and board -- Determination of bending stiffness -- Resonance method	90.93	85.060	TC 6/SC 2
188ISO 5630-1:1991 Paper and board -- Accelerated ageing -- Part 1: Dry heat treatment at 105 degrees C	90.93	85.060	TC 6/SC 2
190ISO 5630-3:1996 Paper and board -- Accelerated ageing -- Part 3: Moist heat treatment at 80 degrees C and 65 % relative humidity	90.93	85.060	TC 6/SC 2
192ISO 5630-4:1986 Paper and board -- Accelerated ageing -- Part 4: Dry heat treatment at 120 or 150 degrees C	90.93	85.060	TC 6/SC 2
193ISO 5630-5:2008 Paper and board -- Accelerated ageing -- Part 5: Exposure to elevated temperature at 100 degrees C	60.60	85.060	TC 6/SC 2
194ISO 5630-6:2009 Paper and board -- Accelerated ageing -- Part 6: Exposure to atmospheric pollution (nitrogen dioxide)	60.60	85.060	TC 6/SC 2
196ISO 5631-1:2009 Paper and board -- Determination of colour by diffuse reflectance -- Part 1: Indoor daylight conditions (C/2 degrees)	60.60	85.060	TC 6
197ISO 5631-2:2008 Paper and board -- Determination of colour by diffuse reflectance -- Part 2: Outdoor daylight conditions (D65/10 degrees)	60.60	85.060	TC 6
198ISO 5631-3:2008 Paper and board -- Determination of colour by diffuse reflectance -- Part 3: Indoor illumination conditions (D50/2 degrees)	60.60	85.060	TC 6
199ISO 5633:1983 Paper and board -- Determination of resistance to water penetration	90.93	85.060	TC 6/SC 2
202ISO 5635:1978 Paper -- Measurement of dimensional change after immersion in water	90.20	85.060	TC 6/SC 2
203ISO 5636-1:1984 Paper and board -- Determination of air permeance (medium range) -- Part 1: General method	90.93	85.060	TC 6/SC 2
207ISO 5636-3:1992 Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method	90.92	85.060	TC 6/SC 2
210ISO 5636-4:2005 Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method	90.92	85.060	TC 6/SC 2
211ISO 5636-5:2003 Paper and board -- Determination of air permeance and air resistance (medium range) -- Part 5: Gurley method	90.92	85.060	TC 6/SC 2
215ISO 5637:1989 Paper and board -- Determination of water absorption after immersion in water	90.20	85.060	TC 6/SC 2
217ISO 5638:1978 Solid fibreboard -- Determination of grammage of single layers	90.20	85.060	TC 6/SC 2
218ISO 5647:1990 Paper and board -- Determination of titanium dioxide content	90.93	85.060	TC 6
222ISO 6587:1992 Paper, board and pulps -- Determination of conductivity of aqueous extracts	90.93	85.040 85.060	TC 6
224ISO 6588-1:2005 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction	90.60	85.040 85.060	TC 6
225ISO 6588-2:2005 Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction	90.60	85.040 85.060	TC 6
227ISO 7213:1981 Pulps -- Sampling for testing	90.93	85.040	TC 6/SC 5
228ISO 7263:2008 Corrugating medium -- Determination of the flat crush resistance after laboratory fluting	60.60	85.060	TC 6/SC 2
231ISO 8226-1:1994 Paper and board -- Measurement of hygroexpansivity -- Part 1: Hygroexpansivity up to a maximum relative humidity of 68 %	90.20	85.060	TC 6/SC 2
233ISO 8226-2:1990 Paper and board -- Measurement of hygroexpansivity -- Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %	90.93	85.060	TC 6/SC 2
235ISO 8254-1:2009 Paper and board -- Measurement of specular gloss -- Part 1: 75 degree gloss with a converging beam, TAPPI method	60.60	85.060	TC 6
236ISO 8254-2:2003 Paper and board -- Measurement of specular gloss -- Part 2: 75 degree gloss with a parallel beam, DIN method	90.93	85.060	TC 6
237ISO 8254-3:2004 Paper and board -- Measurement of specular gloss -- Part 3: 20 degree gloss with a converging beam, TAPPI method	90.93	85.060	TC 6
240ISO 8784-1:2005 Pulp, paper and board -- Microbiological examination -- Part 1: Total count of bacteria, yeast and mould based on disintegration	90.92	85.060 85.040 07.100.99	TC 6/SC 2
242ISO 8787:1986 Paper and board -- Determination of capillary rise -- Klemm method	90.93	85.060	TC 6/SC 2
243ISO 8791-1:1986 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method	90.92	85.060	TC 6/SC 2
244ISO 8791-2:1990 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method	90.92	85.060	TC 6/SC 2
246ISO 8791-3:2005 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method	90.92	85.060	TC 6/SC 2
248ISO 8791-4:2007 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method	60.60	85.060	TC 6/SC 2
250ISO 9184-1:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 1: General method	90.93	85.060 85.040	TC 6/SC 5
251ISO 9184-2:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 2: Staining guide	90.93	85.060 85.040	TC 6/SC 5
252ISO 9184-3:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 3: Herzberg staining test	90.93	85.060 85.040	TC 6/SC 5
253ISO 9184-4:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 4: Graff "C" staining test	90.93	85.060 85.040	TC 6/SC 5
254ISO 9184-5:1990 Paper, board and pulps -- Fibre furnish analysis -- Part 5: Lofton-Merritt staining test (modification of Wisbar)	90.93	85.060 85.040	TC 6/SC 5
255ISO 9184-6:1994 Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness	90.20	85.060 85.040	TC 6/SC 5
256ISO 9184-7:1994 Paper, board and pulps -- Fibre furnish analysis -- Part 7: Determination of weight factor	90.20	85.040 85.060	TC 6/SC 5
258ISO 9197:2006 Paper, board and pulps -- Determination of water-soluble chlorides	90.60	85.040 85.060	TC 6
261ISO 9198:2001 Paper, board and pulp -- Determination of water-soluble sulfates	90.93	85.040 85.060	TC 6
264ISO 9416:2009 Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)	60.60	85.040 85.060	TC 6
265ISO 9668:1990 Pulps -- Determination of magnesium content -- Flame atomic absorption spectrometric method	90.93	85.040	TC 6
267ISO 9895:2008 Paper and board -- Compressive strength -- Short-span test	60.60	85.060	TC 6/SC 2
268ISO 9932:1990 Paper and board -- Determination of water vapour transmission rate of sheet materials -- Dynamic sweep and static gas methods	90.93	85.060	TC 6/SC 2
271ISO 10716:1994 Paper and board -- Determination of alkali reserve	90.20	85.060	TC 6
272ISO 10775:1995 Paper, board and pulps -- Determination of cadmium content -- Atomic absorption spectrometric method	90.93	85.040 85.060	TC 6
274ISO 11093-1:1994 Paper and board -- Testing of cores -- Part 1: Sampling	90.93	85.060	TC 6
275ISO 11093-2:1994 Paper and board -- Testing of cores -- Part 2: Conditioning of test samples	90.93	85.060	TC 6
276ISO 11093-3:1994 Paper and board -- Testing of cores -- Part 3: Determination of moisture content using the oven drying method	90.93	85.060	TC 6
277ISO 11093-4:1997 Paper and board -- Testing of cores -- Part 4: Measurement of dimensions	90.93	85.060	TC 6
279ISO 11093-5:2009 Paper and board -- Testing of cores -- Part 5: Determination of characteristics of concentric rotation	60.60	85.060	TC 6
280ISO 11093-6:2005 Paper and board -- Testing of cores -- Part 6: Determination of bending strength by the three-point method	90.93	85.060	TC 6
282ISO 11093-7:1997 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method	90.92	85.060	TC 6
284ISO 11093-8:1997 Paper and board -- Testing of cores -- Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis	90.60	85.060	TC 6
285ISO 11093-9:2006 Paper and board -- Testing of cores -- Part 9: Determination of flat crush resistance	90.20	85.060	TC 6
288ISO 11475:2004 Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)	90.93	85.060	TC 6
290ISO 11476:2000 Paper and board -- Determination of CIE-whiteness, C/2 degree (indoor illumination conditions)	90.92	85.060	TC 6
292ISO 11480:1997 Pulp, paper and board -- Determination of total chlorine and organically bound chlorine	90.60	85.060 85.040	TC 6
294ISO 11556:2005 Paper and board -- Determination of curl using a single vertically suspended test piece	90.93	85.060	TC 6/SC 2
297ISO 12192:2002 Paper and board -- Compressive strength -- Ring crush method	90.92	85.060	TC 6/SC 2
299ISO 12625-1:2005 Tissue paper and tissue products -- Part 1: General guidance on terms	90.92	85.060 01.040.85	TC 6/SC 2
301ISO 12625-3:2005 Tissue paper and tissue products -- Part 3: Determination of thickness, bulking thickness and apparent bulk density	90.93	85.060	TC 6/SC 2
302ISO 12625-4:2005 Tissue paper and tissue products -- Part 4: Determination of tensile strength, stretch at break and tensile energy absorption	90.93	85.060	TC 6/SC 2
303ISO 12625-5:2005 Tissue paper and tissue products -- Part 5: Determination of wet tensile strength	90.93	85.060	TC 6/SC 2
304ISO 12625-6:2005 Tissue paper and tissue products -- Part 6: Determination of grammage	90.93	85.060	TC 6/SC 2
305ISO 12625-7:2007 Tissue paper and tissue products -- Part 7: Determination of optical properties	60.60	85.060	TC 6/SC 2
306ISO 12625-8:2006 Tissue paper and tissue products -- Part 8: Water-absorption time and water-absorption capacity, basket- immersion test method	90.92	85.060	TC 6/SC 2
308ISO 12625-9:2005 Tissue paper and tissue products -- Part 9: Determination of ball burst strength	90.93	85.060	TC 6/SC 2
315ISO 13542:2006 Paper and board -- Specification for internal diameters of cores for reels	90.20	85.060	TC 6
316ISO 13820:1996 Paper, board and corrugated fibreboard -- Description and calibration of compression-testing equipment	90.93	85.100	TC 6/SC 2
317ISO 13821:2002 Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method	90.93	85.060	TC 6/SC 2
319ISO 14453:1997 Pulps -- Determination of acetone-soluble matter	90.60	85.040	TC 6
320ISO 14487:1997 Pulps -- Standard water for physical testing	90.93	85.040	TC 6/SC 5
322ISO 14968:1999 Paper and board -- Cut-size office paper -- Measurement of curl in a pack of sheets	90.20	85.060	TC 6/SC 2
323ISO 15318:1999 Pulp, paper and board -- Determination of 7 specified polychlorinated biphenyls (PCB)	90.20	85.060 85.040	TC 6/SC 5
325ISO 15320:2003 Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract	90.92	85.060 85.040	TC 6/SC 5
327ISO 15359:1999 Paper and board -- Determination of the static and kinetic coefficients of friction -- Horizontal plane method	90.20	85.060	TC 6/SC 2
328ISO 15360-1:2000 Recycled pulps -- Estimation of Stickies and Plastics -- Part 1: Visual method	90.93	85.040	TC 6/SC 5
329ISO 15360-2:2001 Recycled pulps -- Estimation of Stickies and Plastics -- Part 2: Image analysis method	90.93	85.040	TC 6/SC 5
330ISO 15360-2:2001/Cor 1:2007	60.60	85.040	TC 6/SC 5
331ISO 15361:2000 Pulps -- Determination of zero-span tensile strength, wet or dry	90.93	85.040	TC 6/SC 5
332ISO 15754:2009 Paper and board -- Determination of z-directional tensile strength	60.60	85.060	TC 6/SC 2
333ISO 15755:1999 Paper and board -- Estimation of contraries	90.20	85.060	TC 6/SC 2
334ISO 16065-1:2001 Pulps -- Determination of fibre length by automated optical analysis -- Part 1: Polarized light method	90.93	85.040	TC 6/SC 5
335ISO 16065-2:2007 Pulps -- Determination of fibre length by automated optical analysis -- Part 2: Unpolarized light method	60.60	85.040	TC 6/SC 5
336ISO 16532-1:2008 Paper and board -- Determination of grease resistance -- Part 1: Permeability test	60.60	85.060	TC 6/SC 2
337ISO 16532-2:2007 Paper and board -- Determination of grease resistance -- Part 2: Surface repellency test	60.60	85.060	TC 6/SC 2
339ISO 17812:2007 Paper, board and pulps -- Determination of total magnesium, total calcium, total manganese, total iron and total copper	60.60	85.060 85.040	TC 6
340ISO 22414:2004 Paper -- Cut-size office paper -- Measurement of edge quality	90.93	85.080.10 85.060	TC 6/SC 2
341ISO 22754:2008 Pulp and paper -- Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement	60.60	85.060 85.040	TC 6
342ISO 22891:2007 Paper -- Determination of transmittance by diffuse reflectance measurement	60.60	85.060	TC 6
343ISO 23713:2005 Pulps -- Determination of fibre coarseness by automated optical analysis -- Polarized light method	90.93	85.040	TC 6/SC 5
344ISO 23714:2007 Pulps -- Determination of water retention value (WRV)	60.60	85.040	TC 6/SC 5
345ISO/TR 24498:2006 Paper, board and pulps -- Estimation of uncertainty for test methods	60.60	85.040 85.060	TC 6
346ISO/TR 25477:2008 Paper, board and pulps - Basic guidelines for image analysis measurements	60.60	85.040 85.060	TC 6/SC 5