• 

TC 6  - Paper, board and pulps 

Items to be displayed:

Published standards Standards under development

Withdrawn standards Projects deleted (last 12 months)

Standards and projects under the direct responsibility of TC 6 Secretariat and its SCs

Standard and/or project		ICS	TC
35ISO/CD 534 Paper and board -- Determination of thickness, density and specific volume	30.60	85.060	TC 6/SC 2
49ISO/CD 776 Pulps -- Determination of acid-insoluble ash	30.60	85.040	TC 6
80ISO/NP 1974 Paper -- Determination of tearing resistance (Elmendorf method)	10.99	85.060	TC 6/SC 2
86ISO/AWI 2469 Paper, board and pulps -- Measurement of diffuse radiance factor	20.00	85.040 85.060	TC 6
99ISO/DIS 2493-1 Paper and board -- Determination of bending resistance -- Part 1: Constant rate of deflection	40.20	85.060	TC 6/SC 2
100ISO/CD 2493-2 Paper and board -- Determination of resistance to bending -- Part 2: Pendulum-type tester	30.60	85.060	TC 6/SC 2
108ISO/CD 3034 Corrugated fibreboard -- Determination of thickness	30.60	85.060	TC 6/SC 2
110ISO/CD 3035 Corrugated fibreboard -- Determination of flat crush resistance	30.60	85.060	TC 6/SC 2
117ISO/DIS 3039 Corrugated fibreboard -- Determination of the grammage of the component papers after separation	40.60	85.060	TC 6/SC 2
146ISO/DIS 5264-2 Pulps -- Laboratory beating -- Part 2: PFI mill method	40.20	85.040	TC 6/SC 5
175ISO/FDIS 5351 Pulps -- Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution	50.20	85.040	TC 6/SC 5
185ISO/CD 5628 Paper and board -- Determination of bending stiffness by static methods -- General principles	30.60	85.060	TC 6/SC 2
205ISO/CD 5636-3 Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method	30.99	85.060	TC 6/SC 2
209ISO/CD 5636-4 Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method	30.60	85.060	TC 6/SC 2
213ISO/CD 5636-5 Paper and board -- Determination of air permeance and air resistance (medium range) -- Part 5: Gurley method	30.60	85.060	TC 6/SC 2
239ISO/NP 8784-1 Pulp, paper and board -- Microbiological examination -- Part 1: Total count of bacteria, yeast and mould based on disintegration	10.99	85.060 85.040 07.100.99	TC 6/SC 2
241ISO/WD 8784-2 Pulp, paper and board -- Microbiological examination -- Part 2: Surface method for enumeration of yeasts and molds	20.99	85.060 85.040 07.100.99	TC 6/SC 2
245ISO/NP 8791-2 Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 2: Bendtsen method	10.99	85.060	TC 6/SC 2
269ISO/DIS 10376 Pulps -- Determination of mass fraction of fines	40.20	85.040	TC 6/SC 5
270ISO/WD TR 10688 Paper, board and pulps -- Basic equations for optical properties	20.60	85.060 85.040	TC 6
283ISO/CD 11093-7 Paper and board -- Testing of cores -- Part 7: Determination of flexural modulus by the three-point method	30.60	85.060	TC 6
287ISO/NP TR 11371 Pulps -- Basic guidelines for refining	10.99		TC 6/SC 5
291ISO/DIS 11476 Paper and board -- Determination of CIE-whiteness, C/2 degrees (indoor illumination conditions)	40.60	85.060	TC 6
298ISO/CD 12192 Paper and board -- Determination of compressive strength -- Ring crush method	30.60	85.060	TC 6/SC 2
300ISO/DIS 12625-1 Tissue paper and tissue products -- Part 1: General principles for the use of terms	40.20	85.060 01.040.85	TC 6/SC 2
307ISO/DIS 12625-8 Tissue paper and tissue products -- Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method	40.60	85.060	TC 6/SC 2
310ISO/FDIS 12625-12 Tissue paper and tissue products -- Part 12: Determination of tensile strength of perforated lines -- Calculation of perforation efficiency	50.20	85.060	TC 6/SC 2
311ISO/DIS 12625-13 Tissue paper and tissue products -- Part 13: Determination of the spectral reflectance factor (brightness) at the wavelength R 457 nm with and without UV stimulus and opacity	40.20	85.060	TC 6/SC 2
312ISO/DIS 12830 Paper, board and pulps -- Determination of acid-soluble magnesium, calcium, manganese, iron, copper, sodium and potassium	40.20	85.040 85.060	TC 6
313ISO/NP TR 13159 Pulps - Basic guidelines for fibre characterization	10.99		TC 6/SC 5
318ISO/FDIS 14436 Pulps -- Standard tap water for drainability measurements -- Conductivity 40 mS/m to 150 mS/m	50.20	85.040	TC 6/SC 5
326ISO/DIS 15320 Paper, board and pulps -- Determination of pentachlorophenol in an aqueous extract	40.60	85.040 85.060	TC 6
338ISO/DIS 16532-3 Paper and board -- Determination of grease resistance -- Part 3: Turpentine test for voids in glassine and greaseproof papers	40.60	85.060	TC 6/SC 2
347ISO/PRF 29681 Paper, board and pulps -- Determination of pH of salted water extracts	50.20	85.040	TC 6