Items to be displayed:
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 225:2010 Fasteners -- Bolts, screws, studs and nuts -- Symbols and descriptions of dimensions | 60.60 | 21.060.10 |
| ISO 272:1982 Fasteners -- Hexagon products -- Widths across flats | 90.20 | 21.060.01 |
| ISO 273:1979 Fasteners -- Clearance holes for bolts and screws | 90.93 | 21.060.01 |
| ISO 885:2000 General purpose bolts and screws -- Metric series -- Radii under the head | 90.93 | 21.060.10 |
| ISO 888:2012 Fasteners -- Bolts, screws and studs -- Nominal lengths and thread lengths | 60.60 | 21.060.10 |
| ISO 1891:2009 Fasteners -- Terminology | 60.60 | 01.040.21 21.060.01 |
| ISO/WD 1891-4 Fasteners -- Terminology -- Part 4: Controls, inspection, delivery, acceptance and quality | 20.20 | |
| ISO 3269:2000 Fasteners -- Acceptance inspection | 90.92 | 21.060.01 |
| ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 | 90.20 | 21.060.01 |
| ISO 4753:2011 Fasteners -- Ends of parts with external ISO metric thread | 60.60 | 21.060.01 |
| ISO 4755:1983 Fasteners -- Thread undercuts for external metric ISO threads | 90.20 | 21.060.01 |
| ISO 4759-1:2000 Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C | 90.93 | 21.060.10 21.060.20 |
| ISO 6157-1:1988 Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements | 90.92 | 21.060.10 |
| ISO 6157-2:1995 Fasteners -- Surface discontinuities -- Part 2: Nuts | 90.92 | 21.060.20 |
| ISO 6157-3:1988 Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements | 90.92 | 21.060.10 |
| ISO 7378:1983 Fasteners -- Bolts, screws and studs -- Split pin holes and wire holes | 90.20 | 21.060.10 |
| ISO 8991:1986 Designation system for fasteners | 90.20 | 21.060.01 |
| ISO 8992:2005 Fasteners -- General requirements for bolts, screws, studs and nuts | 90.20 | 21.060.10 21.060.20 |
| ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 | 90.20 | 21.060.10 |
| ISO/CD 16228 Fasteners -- Inspection documents | 30.00 | 21.060.01 |
| ISO 16426:2002 Fasteners -- Quality assurance system | 90.20 | 21.060.01 |
