TC 2 - Fasteners

Items to be displayed:

Standards and projects under the direct responsibility of TC 2 Secretariat and its SCs

Standard and/or project		ICS	TC
0ISO 225:1983 Fasteners -- Bolts, screws, studs and nuts -- Symbols and designations of dimensions	90.92	21.060.10	TC 2/SC 7
2ISO 272:1982 Fasteners -- Hexagon products -- Widths across flats	90.93	21.060.01	TC 2/SC 7
3ISO 273:1979 Fasteners -- Clearance holes for bolts and screws	90.93	21.060.01	TC 2/SC 7
11ISO 885:2000 General purpose bolts and screws -- Metric series -- Radii under the head	90.93	21.060.10	TC 2/SC 7
13ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes -- General plan	90.93	21.060.30	TC 2/SC 10
14ISO 887:2000/Cor 1:2006	60.60	21.060.30	TC 2/SC 10
16ISO 888:1976 Bolts, screws and studs -- Nominal lengths, and thread lengths for general purpose bolts	90.92	21.060.10	TC 2/SC 7
19ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread	60.60	21.060.10	TC 2/SC 1
23ISO 898-2:1992 Mechanical properties of fasteners -- Part 2: Nuts with specified proof load values -- Coarse thread	90.92	21.060.20	TC 2/SC 1
26ISO 898-5:1998 Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses	90.92	21.060.10	TC 2/SC 1
28ISO 898-6:1994 Mechanical properties of fasteners -- Part 6: Nuts with specified proof load values -- Fine pitch thread	90.92	21.060.20	TC 2/SC 1
31ISO 898-7:1992 Mechanical properties of fasteners -- Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm	90.92	21.060.10	TC 2/SC 1
33ISO 1051:1999 Rivet shank diameters	90.93	21.060.40	TC 2/SC 10
34ISO 1207:1992 Slotted cheese head screws -- Product grade A	90.92	21.060.10	TC 2/SC 10
38ISO 1234:1997 Split pins	90.93	21.060.50	TC 2/SC 10
39ISO 1478:1999 Tapping screws thread	90.93	21.040.30	TC 2/SC 10
41ISO 1479:1983 Hexagon head tapping screws	90.92	21.060.10	TC 2/SC 10
45ISO 1481:1983 Slotted pan head tapping screws	90.92	21.060.10	TC 2/SC 10
46ISO 1482:1983 Slotted countersunk (flat) head tapping screws (common head style)	90.92	21.060.10	TC 2/SC 10
49ISO 1483:1983 Slotted raised countersunk (oval) head tapping screws (common head style)	90.92	21.060.10	TC 2/SC 10
51ISO 1580:1994 Slotted pan head screws -- Product grade A	90.93	21.060.10	TC 2/SC 10
52ISO 1891:2009 Fasteners -- Terminology	90.92	21.060.01 01.040.21	TC 2/SC 7
55ISO 2009:1994 Slotted countersunk flat head screws (common head style) -- Product grade A	90.93	21.060.10	TC 2/SC 10
57ISO 2010:1994 Countersunk slotted raised head screws (common head style) -- Product grade A	90.93	21.060.10	TC 2/SC 10
60ISO 2320:2008 Prevailing torque type steel nuts -- Mechanical and performance properties	60.60	21.060.20	TC 2/SC 1
62ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel	90.93	21.060.50	TC 2/SC 10
66ISO 2339:1986 Taper pins, unhardened	90.93	21.060.50	TC 2/SC 10
68ISO 2340:1986 Clevis pins without head	90.93	21.060.50	TC 2/SC 10
69ISO 2341:1986 Clevis pins with head	90.93	21.060.50	TC 2/SC 10
72ISO 2342:2003 Slotted headless screws with shank	90.93	21.060.10	TC 2/SC 10
76ISO 2702:1992 Heat-treated steel tapping screws -- Mechanical properties	90.92	21.060.10	TC 2/SC 10
80ISO 3269:2000 Fasteners -- Acceptance inspection	90.93	21.060.01	TC 2/SC 7
85ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs	60.60	21.060.10	TC 2/SC 1
87ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts	60.60	21.060.20	TC 2/SC 1
89ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress	60.60	21.060.10	TC 2/SC 1
91ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 4: Tapping screws	60.60	21.060.10	TC 2/SC 1
92ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262	90.93	21.060.01	TC 2/SC 7
93ISO 3800:1993 Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results	90.93	21.060.01	TC 2/SC 1
97ISO 4014:1999 Hexagon head bolts -- Product grades A and B	90.93	21.060.10	TC 2/SC 10
98ISO 4015:1979 Hexagon head bolts -- Product grade B -- Reduced shank (shank diameter approximately equal to pitch diameter)	90.93	21.060.10	TC 2/SC 10
99ISO 4016:1999 Hexagon head bolts -- Product grade C	90.93	21.060.10	TC 2/SC 10
103ISO 4017:1999 Hexagon head screws -- Product grades A and B	90.93	21.060.10	TC 2/SC 10
107ISO 4018:1999 Hexagon head screws -- Product grade C	90.93	21.060.10	TC 2/SC 10
108ISO 4026:2003 Hexagon socket set screws with flat point	90.93	21.060.10	TC 2/SC 10
111ISO 4027:2003 Hexagon socket set screws with cone point	90.93	21.060.10	TC 2/SC 10
114ISO 4028:2003 Hexagon socket set screws with dog point	90.93	21.060.10	TC 2/SC 10
117ISO 4029:2003 Hexagon socket set screws with cup point	90.93	21.060.10	TC 2/SC 10
120ISO 4032:1999 Hexagon nuts, style 1 -- Product grades A and B	90.93	21.060.20	TC 2/SC 10
123ISO 4033:1999 Hexagon nuts, style 2 -- Product grades A and B	90.93	21.060.20	TC 2/SC 10
125ISO 4034:1999 Hexagon nuts -- Product grade C	90.93	21.060.20	TC 2/SC 10
128ISO 4035:1999 Hexagon thin nuts (chamfered) -- Product grades A and B	90.93	21.060.20	TC 2/SC 10
132ISO 4036:1999 Hexagon thin nuts (unchamfered) -- Product grade B	90.93	21.060.20	TC 2/SC 10
134ISO 4042:1999 Fasteners -- Electroplated coatings	90.93	21.060.01	TC 2/SC 1
135ISO 4161:1999 Hexagon nuts with flange -- Coarse thread	90.93	21.060.20	TC 2/SC 10
137ISO 4162:1990 Hexagon flange bolts -- Small series	90.93	21.060.10	TC 2/SC 10
140ISO 4753:1999 Fasteners -- Ends of parts with external ISO metric thread	90.60	21.060.01	TC 2/SC 7
141ISO 4755:1983 Fasteners -- Thread undercuts for external metric ISO threads	90.93	21.060.01	TC 2/SC 7
142ISO 4757:1983 Cross recesses for screws	90.60	21.060.10	TC 2/SC 10
144ISO 4759-1:2000 Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C	90.93	21.060.20 21.060.10	TC 2/SC 7
147ISO 4759-3:2000 Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C	90.93	21.060.30	TC 2/SC 10
150ISO 4762:2004 Hexagon socket head cap screws	90.93	21.060.10	TC 2/SC 10
155ISO 4766:1983 Slotted set screws with flat point	90.92	21.060.10	TC 2/SC 10
157ISO 6157-1:1988 Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements	90.93	21.060.10	TC 2/SC 7
158ISO 6157-2:1995 Fasteners -- Surface discontinuities -- Part 2: Nuts	90.93	21.060.20	TC 2/SC 7
159ISO 6157-3:1988 Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements	90.93	21.060.10	TC 2/SC 7
161ISO 7040:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 1 -- Property classes 5, 8 and 10	90.60	21.060.20	TC 2/SC 10
162ISO 7041:2002 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 -- Property classes 9 and 12	90.60	21.060.20	TC 2/SC 10
166ISO 7042:1997 Prevailing torque type all-metal hexagon nuts, style 2 -- Property classes 5, 8, 10 and 12	90.60	21.060.20	TC 2/SC 10
167ISO 7043:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) -- Product grades A and B	90.60	21.060.20	TC 2/SC 10
169ISO 7044:1997 Prevailing torque type all-metal hexagon nuts with flange -- Product grades A and B	90.60	21.060.20	TC 2/SC 10
172ISO 7045:1994 Pan head screws with type H or type Z cross recess -- Product grade A	90.93	21.060.10	TC 2/SC 10
174ISO 7046-1:1994 Countersunk flat head screws (common head style) with type H or type Z cross recess -- Product grade A -- Part 1: Steel of property class 4.8	90.93	21.060.10	TC 2/SC 10
175ISO 7046-2:1990 Cross-recessed countersunk flat head screws (common head style) -- Grade A -- Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals	90.93	21.060.10	TC 2/SC 10
177ISO 7047:1994 Countersunk raised head screws (common head style) with type H or type Z cross recess -- Product grade A	90.93	21.060.10	TC 2/SC 10
178ISO 7048:1998 Cross recessed cheese head screws	90.93	21.060.10	TC 2/SC 10
180ISO 7049:1983 Cross recessed pan head tapping screws	90.92	21.060.10	TC 2/SC 10
181ISO 7050:1983 Cross recessed countersunk (flat) head tapping screws (common head style)	90.92	21.060.10	TC 2/SC 10
184ISO 7051:1983 Cross recessed raised countersunk (oval) head tapping screws	90.92	21.060.10	TC 2/SC 10
185ISO 7053:1992 Hexagon washer head tapping screws	90.92	21.060.10	TC 2/SC 10
187ISO 7085:1999 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws	95.60	21.060.10	TC 2/SC 1
188ISO 7089:2000 Plain washers -- Normal series -- Product grade A	90.93	21.060.30	TC 2/SC 10
190ISO 7090:2000 Plain washers, chamfered -- Normal series -- Product grade A	90.93	21.060.30	TC 2/SC 10
193ISO 7091:2000 Plain washers -- Normal series -- Product grade C	90.93	21.060.30	TC 2/SC 10
195ISO 7092:2000 Plain washers -- Small series -- Product grade A	90.93	21.060.30	TC 2/SC 10
197ISO 7093-1:2000 Plain washers -- Large series -- Part 1: Product grade A	90.93	21.060.30	TC 2/SC 10
198ISO 7093-2:2000 Plain washers -- Large series -- Part 2: Product grade C	90.93	21.060.30	TC 2/SC 10
200ISO 7094:2000 Plain washers -- Extra large series -- Product grade C	90.93	21.060.30	TC 2/SC 10
201ISO 7094:2000/Cor 1:2000	60.60	21.060.30	TC 2/SC 10
202ISO 7378:1983 Fasteners -- Bolts, screws and studs -- Split pin holes and wire holes	90.93	21.060.10	TC 2/SC 7
203ISO 7379:1983 Hexagon socket head shoulder screws	90.93	21.060.10	TC 2/SC 10
204ISO 7380:2004 Hexagon socket button head screws	90.92	21.060.10	TC 2/SC 10
216ISO 7434:1983 Slotted set screws with cone point	90.93	21.060.10	TC 2/SC 10
217ISO 7435:1983 Slotted set screws with long dog point	90.93	21.060.10	TC 2/SC 10
218ISO 7436:1983 Slotted set screws with cup point	90.93	21.060.10	TC 2/SC 10
219ISO 7719:1997 Prevailing torque type all-metal hexagon nuts, style 1 -- Property classes 5, 8 and 10	90.60	21.060.20	TC 2/SC 10
221ISO 7720:1997 Prevailing torque type all-metal hexagon nuts, style 2 -- Property class 9	90.60	21.060.20	TC 2/SC 10
223ISO 7721:1983 Countersunk head screws -- Head configuration and gauging	90.93	21.060.10	TC 2/SC 10
224ISO 7721-2:1990 Countersunk flat head screws -- Part 2: Penetration depth of cross recesses	90.93	21.060.10	TC 2/SC 10
226ISO 8673:1999 Hexagon nuts, style 1, with metric fine pitch thread -- Product grades A and B	90.93	21.060.20	TC 2/SC 10
228ISO 8674:1999 Hexagon nuts, style 2, with metric fine pitch thread -- Product grades A and B	90.93	21.060.20	TC 2/SC 10
229ISO 8675:1999 Hexagon thin nuts (chamfered) with metric fine pitch thread -- Product grades A and B	90.93	21.060.20	TC 2/SC 10
232ISO 8676:1999 Hexagon head screws with metric fine pitch thread -- Product grades A and B	90.93	21.060.10	TC 2/SC 10
234ISO 8678:1988 Cup head square neck bolts with small head and short neck -- Product grade B	90.93	21.060.10	TC 2/SC 10
235ISO 8733:1997 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel	90.93	21.060.50	TC 2/SC 10
238ISO 8734:1997 Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)	90.93	21.060.50	TC 2/SC 10
240ISO 8735:1997 Parallel pins with internal thread, of hardened steel and martensitic stainless steel	90.93	21.060.50	TC 2/SC 10
241ISO 8736:1986 Taper pins with internal thread, unhardened	90.93	21.060.50	TC 2/SC 10
242ISO 8737:1986 Taper pins with external thread, unhardened	90.93	21.060.50	TC 2/SC 10
243ISO 8738:1986 Plain washers for clevis pins -- Product grade A	90.93	21.060.30	TC 2/SC 10
244ISO 8739:1997 Grooved pins -- Full-length parallel grooved, with pilot	90.93	21.060.50	TC 2/SC 10
247ISO 8740:1997 Grooved pins -- Full-length parallel grooved, with chamfer	90.93	21.060.50	TC 2/SC 10
249ISO 8741:1997 Grooved pins -- Half-length reverse-taper grooved	90.93	21.060.50	TC 2/SC 10
251ISO 8742:1997 Grooved pins -- One-third-length centre grooved	90.93	21.060.50	TC 2/SC 10
252ISO 8743:1997 Grooved pins -- Half-length centre grooved	90.93	21.060.50	TC 2/SC 10
255ISO 8744:1997 Grooved pins -- Full-length taper grooved	90.93	21.060.50	TC 2/SC 10
257ISO 8745:1997 Grooved pins -- Half-length taper grooved	90.93	21.060.50	TC 2/SC 10
258ISO 8746:1997 Grooved pins with round head	90.93	21.060.50	TC 2/SC 10
261ISO 8747:1997 Grooved pins with countersunk head	90.93	21.060.50	TC 2/SC 10
263ISO 8748:2007 Spring-type straight pins -- Coiled, heavy duty	60.60	21.060.50	TC 2/SC 10
265ISO 8749:1986 Pins and grooved pins -- Shear test	90.93	21.060.50	TC 2/SC 10
268ISO 8750:2007 Spring-type straight pins -- Coiled, standard duty	60.60	21.060.50	TC 2/SC 10
269ISO 8751:2007 Spring-type straight pins -- Coiled, light duty	60.60	21.060.50	TC 2/SC 10
273ISO 8752:2009 Spring-type straight pins -- Slotted, heavy duty	60.60	21.060.50	TC 2/SC 10
276ISO 8765:1999 Hexagon head bolts with metric fine pitch thread -- Product grades A and B	90.93	21.060.10	TC 2/SC 10
277ISO 8839:1986 Mechanical properties of fasteners -- Bolts, screws, studs and nuts made of non-ferrous metals	90.93	21.060.20 21.060.10	TC 2/SC 1
278ISO 8991:1986 Designation system for fasteners	90.93	21.060.01	TC 2/SC 7
280ISO 8992:2005 Fasteners -- General requirements for bolts, screws, studs and nuts	90.93	21.060.20 21.060.10	TC 2/SC 7
281ISO 10484:1997 Widening test on nuts	90.93	21.060.20	TC 2/SC 1
282ISO 10485:1991 Cone proof load test on nuts	90.93	21.060.20	TC 2/SC 1
283ISO 10509:1992 Hexagon flange head tapping screws	90.60	21.060.10	TC 2/SC 10
284ISO 10510:1999 Tapping screw and washer assemblies with plain washers	90.60	21.060.10	TC 2/SC 10
285ISO 10511:1997 Prevailing torque type hexagon thin nuts (with non-metallic insert)	90.60	21.060.20	TC 2/SC 10
286ISO 10512:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread -- Property classes 6, 8 and 10	90.60	21.060.20	TC 2/SC 10
287ISO 10513:1997 Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread -- Property classes 8, 10 and 12	90.60	21.060.20	TC 2/SC 10
288ISO 10642:2004 Hexagon socket countersunk head screws	90.93	21.060.10	TC 2/SC 10
290ISO 10644:2009 Screw and washer assemblies made of steel with plain washers -- Washer hardness classes 200 HV and 300 HV	60.60	21.060.30	TC 2/SC 10
292ISO 10663:1999 Hexagon nuts with flange -- Fine pitch thread	90.93	21.060.20	TC 2/SC 10
294ISO 10664:2005 Hexalobular internal driving feature for bolts and screws	90.93	21.060.10	TC 2/SC 10
295ISO 10666:1999 Drilling screws with tapping screw thread -- Mechanical and functional properties	90.93	21.060.10	TC 2/SC 10
296ISO 10669:1999 Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A	90.93	21.060.30	TC 2/SC 10
298ISO 10673:2009 Plain washers for screw and washer assemblies -- Small, normal and large series -- Product grade A	60.60	21.060.30	TC 2/SC 10
299ISO 10683:2000 Fasteners -- Non-electrolytically applied zinc flake coatings	90.93	25.220.40 21.060.01	TC 2/SC 1
300ISO 10684:2004 Fasteners -- Hot dip galvanized coatings	90.93	25.220.40 21.060.01	TC 2/SC 1
301ISO 10684:2004/Cor 1:2008	60.60	21.060.01 25.220.40	TC 2/SC 1
302ISO 12125:1997 Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread -- Product grades A and B	90.60	21.060.20	TC 2/SC 10
303ISO 12126:1997 Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread -- Product grades A and B	90.60	21.060.20	TC 2/SC 10
306ISO 13337:2009 Spring-type straight pins -- Slotted, light duty	60.60	21.060.50	TC 2/SC 10
307ISO 14579:2001 Hexalobular socket head cap screws	90.93	21.060.10	TC 2/SC 10
308ISO 14580:2001 Hexalobular socket cheese head screws	90.93	21.060.10	TC 2/SC 10
309ISO 14580:2001/Cor 1:2004	60.60	21.060.10	TC 2/SC 10
310ISO 14583:2001 Hexalobular socket pan head screws	90.93	21.060.10	TC 2/SC 10
311ISO 14583:2001/Cor 1:2004	60.60	21.060.10	TC 2/SC 10
312ISO 14584:2001 Hexalobular socket raised countersunk head screws	90.93	21.060.10	TC 2/SC 10
313ISO 14585:2001 Hexalobular socket pan head tapping screws	90.93	21.060.10	TC 2/SC 10
314ISO 14585:2001/Cor 1:2004	60.60	21.060.10	TC 2/SC 10
315ISO 14586:2001 Hexalobular socket countersunk head tapping screws	90.93	21.060.10	TC 2/SC 10
316ISO 14587:2001 Hexalobular socket raised countersunk (oval) head tapping screws	90.93	21.060.10	TC 2/SC 10
317ISO 14588:2000 Blind rivets -- Terminology and definitions	90.93	01.040.21 21.060.40	TC 2/SC 10
318ISO 14589:2000 Blind rivets -- Mechanical testing	90.93	21.060.40	TC 2/SC 10
319ISO 15065:2005 Countersinks for countersunk head screws with head configuration in accordance with ISO 7721	90.93	21.060.10	TC 2/SC 7
320ISO 15071:1999 Hexagon bolts with flange -- Small series -- Product grade A	90.93	21.060.10	TC 2/SC 10
321ISO 15071:1999/Cor 1:2006	60.60	21.060.10	TC 2/SC 10
322ISO 15072:1999 Hexagon bolts with flange with metric fine pitch thread -- Small series -- Product grade A	90.60	21.060.10	TC 2/SC 10
323ISO 15072:1999/Cor 1:2006	60.60	21.060.10	TC 2/SC 10
324ISO 15330:1999 Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method	90.20	21.060.01	TC 2/SC 1
325ISO 15480:1999 Hexagon washer head drilling screws with tapping screw thread	90.93	21.060.10	TC 2/SC 10
326ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread	90.93	21.060.10	TC 2/SC 10
327ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread	90.93	21.060.10	TC 2/SC 10
328ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread	90.93	21.060.10	TC 2/SC 10
329ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head -- AlA/St	90.93	21.060.40	TC 2/SC 10
330ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head -- AlA/St	90.93	21.060.40	TC 2/SC 10
331ISO 15975:2002 Closed end blind rivets with break pull mandrel and protruding head -- AI/AIA	90.93	21.060.40	TC 2/SC 10
332ISO 15976:2002 Closed end blind rivets with break pull mandrel and protruding head -- St/St	90.93	21.060.40	TC 2/SC 10
333ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head -- AIA/St	90.93	21.060.40	TC 2/SC 10
334ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head -- AIA/St	90.93	21.060.40	TC 2/SC 10
335ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head -- St/St	90.93	21.060.40	TC 2/SC 10
336ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head -- St/St	90.93	21.060.40	TC 2/SC 10
337ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA	90.93	21.060.40	TC 2/SC 10
338ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head -- AIA/AIA	90.93	21.060.40	TC 2/SC 10
339ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head -- A2/A2	90.93	21.060.40	TC 2/SC 10
340ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2	90.93	21.060.40	TC 2/SC 10
341ISO 16047:2005 Fasteners -- Torque/clamp force testing	90.92	21.060.01	TC 2/SC 1
342ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners	90.93	21.060.01	TC 2/SC 1
343ISO 16426:2002 Fasteners -- Quality assurance system	90.93	21.060.01	TC 2/SC 7
344ISO 16582:2002 Open end blind rivets with break pull mandrel and protruding head -- Cu/St or Cu/Br or Cu/SSt	90.93	21.060.40	TC 2/SC 10
345ISO 16583:2002 Open end blind rivets with break pull mandrel and countersunk head -- Cu/St or Cu/Br or Cu/SSt	90.93	21.060.40	TC 2/SC 10
346ISO 16584:2002 Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt	90.93	21.060.40	TC 2/SC 10
347ISO 16585:2002 Closed end blind rivets with pull mandrel and protruding head -- A2/SSt	90.93	21.060.40	TC 2/SC 10
349ISO 21670:2003 Hexagon weld nuts with flange	90.60	21.060.20	TC 2/SC 10
350ISO 23429:2004 Gauging of hexagon sockets	90.93	21.060.10	TC 2/SC 10