Items to be displayed:
| Subcommittee | Subcommittee Title |
|---|---|
| ISO/TC 2/SC 7 | Reference standards |
| ISO/TC 2/SC 11 | Fasteners with metric external thread |
| ISO/TC 2/SC 12 | Fasteners with metric internal thread |
| ISO/TC 2/SC 13 | Fasteners with non-metric thread |
| ISO/TC 2/SC 14 | Surface coatings |
| Standard and/or project | Stage | ICS |
|---|---|---|
| ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes -- General plan | 90.93 | 21.060.30 |
| ISO 887:2000/Cor 1:2006 | 60.60 | 21.060.30 |
| ISO 1051:1999 Rivet shank diameters | 90.93 | 21.060.40 |
| ISO 1234:1997 Split pins | 90.60 | 21.060.50 |
| ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel | 90.60 | 21.060.50 |
| ISO 2339:1986 Taper pins, unhardened | 90.93 | 21.060.50 |
| ISO 2340:1986 Clevis pins without head | 90.93 | 21.060.50 |
| ISO 2341:1986 Clevis pins with head | 90.93 | 21.060.50 |
| ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs | 90.92 | 21.060.10 |
| ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts | 90.92 | 21.060.20 |
| ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress | 60.60 | 21.060.10 |
| ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 4: Tapping screws | 60.60 | 21.060.10 |
| ISO/WD 4759-3 Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C | 20.20 | |
| ISO 4759-3:2000 Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C | 90.92 | 21.060.30 |
| ISO 7089:2000 Plain washers -- Normal series -- Product grade A | 90.93 | 21.060.30 |
| ISO 7090:2000 Plain washers, chamfered -- Normal series -- Product grade A | 90.93 | 21.060.30 |
| ISO 7091:2000 Plain washers -- Normal series -- Product grade C | 90.93 | 21.060.30 |
| ISO 7092:2000 Plain washers -- Small series -- Product grade A | 90.93 | 21.060.30 |
| ISO 7093-1:2000 Plain washers -- Large series -- Part 1: Product grade A | 90.93 | 21.060.30 |
| ISO 7093-2:2000 Plain washers -- Large series -- Part 2: Product grade C | 90.93 | 21.060.30 |
| ISO 7094:2000 Plain washers -- Extra large series -- Product grade C | 90.93 | 21.060.30 |
| ISO 7094:2000/Cor 1:2000 | 60.60 | 21.060.30 |
| ISO 8733:1997 Parallel pins with internal thread, of unhardened steel and austenitic stainless steel | 90.60 | 21.060.50 |
| ISO 8734:1997 Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins) | 90.60 | 21.060.50 |
| ISO 8735:1997 Parallel pins with internal thread, of hardened steel and martensitic stainless steel | 90.60 | 21.060.50 |
| ISO 8736:1986 Taper pins with internal thread, unhardened | 90.93 | 21.060.50 |
| ISO 8737:1986 Taper pins with external thread, unhardened | 90.93 | 21.060.50 |
| ISO 8738:1986 Plain washers for clevis pins -- Product grade A | 90.93 | 21.060.30 |
| ISO 8739:1997 Grooved pins -- Full-length parallel grooved, with pilot | 90.60 | 21.060.50 |
| ISO 8740:1997 Grooved pins -- Full-length parallel grooved, with chamfer | 90.60 | 21.060.50 |
| ISO 8741:1997 Grooved pins -- Half-length reverse-taper grooved | 90.60 | 21.060.50 |
| ISO 8742:1997 Grooved pins -- One-third-length centre grooved | 90.60 | 21.060.50 |
| ISO 8743:1997 Grooved pins -- Half-length centre grooved | 90.60 | 21.060.50 |
| ISO 8744:1997 Grooved pins -- Full-length taper grooved | 90.60 | 21.060.50 |
| ISO 8745:1997 Grooved pins -- Half-length taper grooved | 90.60 | 21.060.50 |
| ISO 8746:1997 Grooved pins with round head | 90.60 | 21.060.50 |
| ISO 8747:1997 Grooved pins with countersunk head | 90.60 | 21.060.50 |
| ISO 8748:2007 Spring-type straight pins -- Coiled, heavy duty | 90.93 | 21.060.50 |
| ISO 8749:1986 Pins and grooved pins -- Shear test | 90.93 | 21.060.50 |
| ISO 8750:2007 Spring-type straight pins -- Coiled, standard duty | 90.93 | 21.060.50 |
| ISO 8751:2007 Spring-type straight pins -- Coiled, light duty | 90.93 | 21.060.50 |
| ISO 8752:2009 Spring-type straight pins -- Slotted, heavy duty | 60.60 | 21.060.50 |
| ISO 10669:1999 Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A | 90.93 | 21.060.30 |
| ISO 13337:2009 Spring-type straight pins -- Slotted, light duty | 60.60 | 21.060.50 |
| ISO 14588:2000 Blind rivets -- Terminology and definitions | 90.93 | 21.060.40 01.040.21 |
| ISO 14589:2000 Blind rivets -- Mechanical testing | 90.93 | 21.060.40 |
| ISO 15973:2000 Closed end blind rivets with break pull mandrel and protruding head -- AlA/St | 90.93 | 21.060.40 |
| ISO 15974:2000 Closed end blind rivets with break pull mandrel and countersunk head -- AlA/St | 90.93 | 21.060.40 |
| ISO 15975:2002 Closed end blind rivets with break pull mandrel and protruding head -- AI/AIA | 90.20 | 21.060.40 |
| ISO 15976:2002 Closed end blind rivets with break pull mandrel and protruding head -- St/St | 90.20 | 21.060.40 |
| ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head -- AIA/St | 90.20 | 21.060.40 |
| ISO 15978:2002 Open end blind rivets with break pull mandrel and countersunk head -- AIA/St | 90.20 | 21.060.40 |
| ISO 15979:2002 Open end blind rivets with break pull mandrel and protruding head -- St/St | 90.20 | 21.060.40 |
| ISO 15980:2002 Open end blind rivets with break pull mandrel and countersunk head -- St/St | 90.20 | 21.060.40 |
| ISO 15981:2002 Open end blind rivets with break pull mandrel and protruding head -- AIA/AIA | 90.20 | 21.060.40 |
| ISO 15982:2002 Open end blind rivets with break pull mandrel and countersunk head -- AIA/AIA | 90.20 | 21.060.40 |
| ISO 15983:2002 Open end blind rivets with break pull mandrel and protruding head -- A2/A2 | 90.20 | 21.060.40 |
| ISO 15984:2002 Open end blind rivets with break pull mandrel and countersunk head -- A2/A2 | 90.20 | 21.060.40 |
| ISO 16048:2003 Passivation of corrosion-resistant stainless-steel fasteners | 90.20 | 21.060.01 |
| ISO 16582:2002 Open end blind rivets with break pull mandrel and protruding head -- Cu/St or Cu/Br or Cu/SSt | 90.20 | 21.060.40 |
| ISO 16583:2002 Open end blind rivets with break pull mandrel and countersunk head -- Cu/St or Cu/Br or Cu/SSt | 90.20 | 21.060.40 |
| ISO 16584:2002 Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt | 90.20 | 21.060.40 |
| ISO 16585:2002 Closed end blind rivets with pull mandrel and protruding head -- A2/SSt | 90.20 | 21.060.40 |
